KitchenAid KUDD01SSPA0 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KUDD01SSPA0

Catégorie: Lave-vaisselle

Taper: Le manuel du propriétaire

Kitchen_kid ®

SINGLE DRAWER DISHWASHER

For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at

www.kitchenaid.com

In Canada, for assistance, installation or service, call: 1-800-807-6777 or visit our website at www.KitchenAid.ca

LAVE-VAISSELLE A TIROIR UNIQUE

Au Canada, pour assistance, installation ou service composez le 1-800-807-8777 ou visitez notre site web & www.KitchenAid.ca

Table of Contents/Table des matieres ............................................................................. 2

Model/Modele KUDD01S

528823/8573753

TABLE OF CONTENTS

DISHWASHER SAFETY ................................................................. 3

PARTS AND FEATURES ................................................................ 4

START-UP GUIDE .......................................................................... 5

Using Your New Dishwasher ....................................................... 5

Wash System ............................................................................... 6

Sound System .............................................................................. 6

Drying System .............................................................................. 6

DISHWASHER LOADING ............................................................... 6

Loading Suggestions ................................................................... 6

Loading Rack ............................................................................... 6

Loading Silverware Basket .......................................................... 8

DISHWASHER USE ........................................................................ 9

Detergent Use .............................................................................. 9

Rinse Aid Dispenser ................................................................... 10

Performance Tips ....................................................................... 10

Wash Cycles ............................................................................... 11

Canceling a Cycle ...................................................................... 12

Pausing a Cycle .......................................................................... 12

Changing a Cycle or Setting ...................................................... 12

Adding Items During a Cycle ..................................................... 12

Option Selections and Adjustments .......................................... 12

WASHING SPECIAL ITEMS ......................................................... 14

DISHWASHER CARE ................................................................... 15

Cleaning ...................................................................................... 15

Drain Air Gap .............................................................................. 16

Storing ........................................................................................ 16

TROUBLESHOOTING .................................................................. 17

Error Codes ................................................................................ 19

ASSISTANCE OR SERVICE ......................................................... 20

In the U.S.A ................................................................................ 20

In Canada ................................................................................... 20

WARRANTY .................................................................................. 21

TABLE DES MATIERES

LA S¢:CURITI :!:DU LAVE-VAISSELLE ......................................... 22

PIC:CES ET CARACTC:RISTIQUES .............................................. 23

GUIDE DE MISE EN MARCHE .................................................... 24

Utilisation de votre nouveau lave-vaisselle ................................ 24

Syst_me de lavage ..................................................................... 25

Systeme sonore .......................................................................... 25

Syst_me de sechage .................................................................. 25

CHARGEMENT DU LAVE-VAISSELLE ....................................... 26

Suggestions de chargement ...................................................... 26

Chargement du panier ............................................................... 26

Chargement du panier a couverts ............................................. 29

UTILISATION DU LAVE-VAISSELLE ........................................... 30

Utilisation du detergent .............................................................. 30

Distributeur d'agent de rin9age .................................................. 31

Conseils pour I'efficacite ............................................................ 31

Programmes de lavage .............................................................. 32

Annulation d'un programme ...................................................... 33

Marquer une pause darts le programme ................................... 33

Changement d'un programme ou reglage ................................ 33

Ajout de vaisselle durant un programme ................................... 33

Selection des options et ajustements ........................................ 33

LAVAGE D'ARTICLES SpI:!:CIAUX .............................................. 36

ENTRETIEN DU LAVE-VAISSELLE ............................................. 37

Nettoyage ................................................................................... 37

Dispositif anti-refoulement ......................................................... 38

Remisage .................................................................................... 38

DC:PANNAGE ................................................................................. 39

Codes d'erreur ............................................................................ 41

ASSISTANCE OU SERVICE ......................................................... 42

GARANTIE ..................................................................................... 43

DISHWASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

[] Read all instructions before using the dishwasher.

[] Use the dishwasher only for its intended function.

[] Use only detergents or rinse agents recommended for use

in a dishwasher, and keep them out of the reach of children.

[] When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut4ype injuries.

[] Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

[] Do not touch the heating element during or immediately

after use.

[] Do not operate the dishwasher unless all enclosure panels

are properly in place.

[] Do not tamper with controls.

[] Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

[] To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

[] Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

[] Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

[] Refer to Installation Instructions for instructions pertaining

to grounding.

SAVE THESE INSTRUCTIONS

PARTS AND FEATURES

This manual covers several different models. The features on your dishwasher may vary from those shown below.

A. SURE-HOLD ®medium rack insert

B. SURE-HOLD ®large rack insert

C. SURE-HOLD ®base rack

D. SURE-HOLD ®light item clips

E. Control panel (on drawer front)

E WHISPER QUIET _ sound system

G. Model and serial number label

(on the bottom left front edge)

H. FLEXI-BASKET =silverware basket

I. Fold-down cup shelves

J. Spray arm

K. Control panel (on drawer top edge)

L. Filter plate

M. Drain filter

N. Powdered detergent dispenser

(inside front drawer)

O. Rinse aid dispenser

(inside front drawer)

R Water inlet (inside front drawer)

Control Panels

O O O O O

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

o÷1

START-UP GUIDE

Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety

information and useful operating tips.

Rinse aid is essential for good drying. Be sure to fill the rinse 6. Run hot water at the sink until the water is hot. (See

aid dispenser before you use your new dishwasher. Each "Performance Tips.") Turn off water.

filling will last about 1 to 2 months depending on your usage.

(See "Rinse Aid Dispenser.")

2. Scrape large food soil and hard items (toothpicks or bones)

from dishes.

3. Check drain filter and spray arm. (See "Cleaning.") Ensure the

drain filter is flush with the filter plate, and the spray arm can

rotate about the center easily.

AB C

A. Spray arm

B.Filter plate

C. Drain filter

Properly load the dishwasher. (See "Dishwasher Loading.")

Load dishes with space in between so water will reach the

soiled surfaces. Make sure nothing keeps the spray arm(s)

from spinning freely.

7. Press the Power pad on the front of the drawer to turn the

dishwasher on or off. When the drawer is opened, the

dishwasher will automatically power up for 30 seconds even

if the Power pad has not been pressed. If no program

selection is made, it will power off again.

8. Press the @ (Cycle Select) or the HI TEMP pad on the top of

the drawer opening to select the desired wash cycle.

Continue to press the (Cycle Select) or the HI TEMP pad, and

the indicators will progress through the different cycles until

the desired cycle is selected. The next time you use the

dishwasher, it will remember the last cycle used. (See "Wash

Cycles.")

(_ O O CD Cb O o_

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

9. Push drawer firmly closed. Press the Start/Resume button on

the front of the drawer to start the wash cycle.

Add powdered detergent. Always use a high quality brand

detergent. (See "Dishwasher Use.")

IMPORTANT: Only use powdered detergent recommended

for dishwashers. Do not use liquid or tablet detergents. Wash

performance could be negatively impacted if you use

anything other than powdered detergent.

NOTES:

• If the dishwasher is operating and a power failure occurs,

it will stop. You may not be able to open the drawer at this

time. When the power supply is resumed, the dishwasher

will start in the same part of the wash cycle.

• To end the wash cycle in mid-cycle, press the Power pad.

Any water in the drawer will be pumped out.

10. The dishwasher will beep 6 times to indicate the end of the

wash cycle. At the end of the wash cycle, the drying fan will

continue to run for a set time or until the drawer is opened.

The fan assists with drying and uses small amounts of energy.

NOTE: It is normal for some water to remain in the drain filter

area after the wash cycle is complete.

Thewashsystemprovidesexcellentcleaningresults.Twolevels

offiltrationfilterthewashwaterandkeepfoodparticlesfrom

redepositingonthecleandishes.

• Afilterplatekeepsbones,pits,andotherlargeobjectsfrom

enteringthepumpsystem.

• Itemssmallenoughtopassthroughthefilterplatearecaught

inthedrainfilter.

• Thewashwatercontinuouslyflowsthroughthedrainfilter,

trappingfoodparticles.

IMPORTANT:Beforeeachwashload,checkthedrainfilterfor

evidenceoffoodparticlesandclean.(Asmallamountofwater

willremaininthedrainfilterarea.)Foodscrapsmaycollectonthe

filterplate,andthesprayarmandfilterplatemayneedcleaning.

Thesprayarmandfilterplatemayneedcleaningaboutoncea

monthinnormaluseormoreoften,shouldtheneedarise.(See

"CleaningtheSprayArm,DrainFilterandFilterPlate"in

"Cleaning"section.)

TheWHISPERQUIEW_soundinsulationsystemhelpstomaintain

aquiethomeenvironmentduringdishwasheroperation.

NOTE:Ifyoudonotloaddishesproperly,thequietoperationof

yourdishwashercouldbeaffected.(See"DishwasherLoading.")

Attheendoftheselectedwashcycle,thedryingfanwillcontinue

torunforasettimeoruntilthedrawerisopened.Thefanassists

withdryingandusesasmallamountofenergy.

DISHWASHER LOADING

Remove leftover food, bones, toothpicks and other hard

items from the dishes. To conserve water, energy and save

time it is not necessary to rinse dishes before putting them

into the dishwasher.

NOTE: Dishes soiled with tomato-based products should be

prerinsed to avoid staining.

• It is important for the water spray to reach all soiled surfaces.

• Load dishes so they are not stacked or overlapping if

possible. For best drying, water must be able to drain from all

surfaces.

• Use special care when loading heavy pots and pans. Heavy

items can damage the interior of the door if they are dropped

or bumped.

• Make sure pot lids and handles, etc., do not interfere with the

spray arm rotation.

Conserve water, energy and save time over hand rinsing by

running a rinse cycle to keep dishes moist if you do not plan

to wash them soon. Foods such as eggs, rice, pasta,

spinach, and cooked cereals may be hard to remove if they

are left to dry over a period of time.

Quiet operating tips

To avoid thumping/clattering noises during operation:

• Make sure lightweight load items are secured in the rack.

• Make sure pot lids and handles, etc., do not touch interior

walls or interfere with the rotation of the spray arm.

IMPORTANT: Do not load anything above the inside top edge of

the drawer as it may keep the drawer lid from properly closing.

Suggested loading patterns

5 place setting

• Load dishes so they do not touch one another.

NOTE: If the rack is incorrectly placed in the drawer, the rack can

block the spray arm rotation. The rack is properly installed if it is

sitting flat on the bottom of the drawer.

The rack is designed for cups, glasses, plates, pans, casseroles

and utensils. Many items, up to 11" (28.38 cm), fit in the rack.

(See recommended loading patterns shown.)

NOTE:Donotloaditemsbetweentherackandthedetergent

dispenserbecausetheymightblockthewaterinletopening

locatedatthebaseofthedispenser.

Fold-Down Cup Shelves

Fold down the cup shelves on the sides of the drawer to hold

additional cups, stemware or long items such as utensils and

spatulas. Fold up when you need room for larger items in the

main rack.

SURE-HOLD _>light item clips

The light item clips hold lightweight plastic items such as cups,

lids, or bowls in place during washing.

Place items so open ends face down for cleaning and

draining.

China, crystal, and other delicate items must not touch each

other during dishwasher operation. Damage may occur.

Load small items in the rack only if they are secured in place.

Load plastic items so the force of the spray does not move

them during the cycle. Only plastic items marked

"dishwasher safe" are recommended.

To avoid chipping, do not let stemware touch other items.

Small bowls, pans, and other utensils can be placed in the

rack.

Load plates, soup bowls, etc., between tines.

Overlap the edges of plates for large loads.

Load soup, cereal, and serving bowls in the rack in a variety

of ways depending upon their size and shape. Load bowls

securely between the rows of tines. Do not nest bowls

because the spray will not reach all surfaces.

Load cake pans and other large items at the sides and back.

Loading such items in front can keep the water spray from

reaching the rinse aid dispenser.

• Secure heavily soiled cookware face down in the rack.

To move a clip

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

SURE-HOLD _ base rack and removable rack inserts

The SURE-HOLD ®removable rack inserts (see illustration below)

allow you to adjust the rack for the type of load you are washing.

You can remove one or more of the inserts to customize the rack

for a particular load. This is useful when washing a variety of

dishes, pots and pans, or roasters.

NOTE: The removable inserts are not designed to be lifted out of

the drawer while loaded with dishes.

A. Large insert

B. Medium insert

C. Base rack

D. Drain filter access panel

To remove either insert

1. Gently pull in and up on the handle to release the insert

handle from the base rack.

2. Once the handle is lifted up, tilt the insert to the left or right to

release the insert legs on the other end from their position

under the base rack wire.

To install either insert

1. Tilt the rack insert end to the left or right to insert the legs

under the base rack wires as shown below.

2. Straighten the insert into position along the bottom of the

base rack.

3. Gently pull in and push down on the insert handle until the

insert locks into position in the base rack.

_}_ _ _d_¸, _ _@_._ _ _J_5/£_

The FLEXI-BASKET TM silverware basket can be separated and

placed into the rack in several locations. Hold joined basket firmly

and slide each basket until the tab aligns with the keyhole on the

back of each basket and pull apart. Now use both sections or just

one to load silverware.

Load the silverware basket while it is in the rack or take the

basket out for loading on a counter or table. The silverware

basket can be removed for easy unloading.

Use the center section with cover down to load silverware in set

positions and avoid nesting. Mix items in end sections of the

basket with some pointing up and some down to avoid nesting.

Spray cannot reach nested items.

Place small items such as baby bottle caps, jar lids, corncob

holders, etc., in the middle section with the hinged cover. Close

the cover over the section to hold small items in place.

To remove the center basket cover

1. Slide the cover to one side until one hinge end pops out of

the holder.

2. Tilt cover and slide in the opposite direction until the other

hinge end pops out of holder. Remove cover.

To install the center basket cover

1. Insert a cover hinge end into holder on one side.

2. Slide the cover until you can insert the opposite hinge end

into the holder on the other side and slide into place.

IMPORTANT: Always load items (knives, skewers, etc.) pointing

down.

NOTES:

• Do not load silver or silver-plated silverware with stainless

steel. These metals can be damaged by contact with each

other during washing.

• Some foods (such as salt, vinegar, milk products, fruit juices,

etc.) can pit or corrode silverware. Run a rinse cycle if you do

not have a full load to wash immediately.

• Check the bottom of the silverware basket to ensure items

have not come through as they may stop spray arm rotation.

DISHWASHER USE

The detergent and rinse aid dispenser is located on the front

inside wall of the drawer. The detergent dispenser has two

sections, the pre wash section is the smaller and the other is for

the main wash detergent. The pre wash and main wash sections

both have inside fill line markings. The pre wash section has one

marking which represents 1 tsp (5 mL). When it is full, it holds

2 tsp (10 mL). The main wash section has two markings, the

lowest mark indicates 2 tsp (10 mL), the middle mark 4 tsp

(20 mL), and when it is full it contains 6 tsp (30 mL).

NOTE: The detergent dispenser is designed for use with

powdered detergent. Liquid and tablet detergents are not

suitable to be used in the dispenser. (Posts inside dispenser are a

reminder not to use detergent tablets.)

A B C

A. Pre Wash section

B. Main Wash section

C. Posts

D. Detergent dispenser latch

E. Rinse aid dispenser plug

F Rinse aid indicator light

G. Water inlet opening

IMPORTANT:

• Use powdered, automatic dishwashing detergent only. Other

detergents can produce excessive suds that can overflow out

of the dishwasher and reduce washing performance.

• Add detergent just before starting a cycle.

• Store tightly closed detergent in a cool, dry place. Using

fresh, automatic dishwasher detergent results in better

cleaning.

NOTE: Do not use detergent with a rinse cycle.

Fillingthe powdered detergent dispenser

1. Press the latch down and the door will open.

2. Pour in detergent. No detergent is needed for the Rinse cycle.

3. After filling the section(s), close the dispenser door until it

clicks shut. The detergent will automatically be released into

the drawer during the wash cycle.

How much powdered detergent to use

• The detergent quantities suggested in the chart are for

individual drawer use.

The amount of detergent to use depends on the hardness of

your water and the type of detergent. If you use too little,

dishes will not be clean. If you use too much in soft water,

glassware will etch.

Water hardness can change over a period of time. Find out

your water's hardness by asking your local water department,

water softener company, or county extension agent.

You can order, at no charge, a water hardness test strip. In

the U.S.A., call the Customer eXperience Center and ask for

Part Number 4171690. (See "Assistance or Service.")

• Different brands of dishwasher detergent have different

amounts of phosphorus for softening water. If you have hard

water and use a detergent with a phosphorous content of

less than 8.7%, you might need to use more detergent, or use

a detergent with a phosphorous content higher than 8.7%.

Water Type Wash Detergent

Cycles

Hard

(13 grains per U.S. gallon

or above)

All**

Soft

(0-6 grains per U.S. gallon)

Quantities

Pre Main

Wash Wash

2 tsp*

(10 mL)

6tsp*

(30 mL)

Medium All** 2 tsp* 4 tsp*

(7-12 grains per U.S. gallon) (10 mL) (20 mL)

1 tsp* 3 tsp*

(5 mL) (15 mL)

Heavy

Normal

Quick

Clean

Light/

China

1 tsp*

(5 mL)

*tsp = teaspoon. 1 tsp = 5 mL.

2tsp*

(f0 mL)

1 tsp*

(5 mL)

1 tsp*

(5 mL)

**No detergent is required in pre wash section for the Quick

Clean and Light/China cycles.

)iT_'_v_;_: _ _ _'_ v _

The regular use of liquid rinse aid gives the best drying results.

Rinse aids keep water from forming droplets that can dry as

spots or streaks. They also help keep metal from tarnishing. They

improve drying by allowing water to drain off of the dishes during

the final rinse. Your dishwasher is designed to use a liquid rinse

aid. Do not use a solid or bar-type rinse aid.

The rinse aid dispenser is located on the front inside of the

drawer underneath the detergent dispenser.

A. Rinse aid plug

B. Rinse aid indicator light

C. Rinse aid dispenser

How much rinse aid to use

The regulator may need adjusting to suit your water conditions.

The lowest setting is "1" and the highest is "5." For hard water,

the rinse aid dispenser should be used with its setting fixed at 5.

(See "Option Selections and Adjustments" section.)

NOTE: If there is excessive foam at the end of the wash, reduce

the rinse aid dispenser setting. If dishes are wet or streaky after

drying, increase the rinse aid dispenser setting.

Filling the rinse aid dispenser

The rinse aid dispenser holds 1.7 oz (50.28 mL) of rinse aid.

Under normal conditions, this will last for about 1 to 2 months.

Try to keep it full, but be sure not to overfill it.

1. Turn the plug counterclockwise and remove.

2. Pour the rinse aid into the circular opening.

3. Take care not to spill rinse aid into the drawer. Any spills must

be wiped up to avoid excess foaming.

4. Fit the plug back into the original position.

Rinse Aid indicator

If the rinse aid indicator light is red, refill the dispenser. If the rinse

aid indicator light is not lit, there is enough rinse aid for the wash.

You do not have to wait until the dispenser is empty to refill.

Hot water dissolves and activates the dishwashing detergent.

Hot water also dissolves grease on dishes and helps glasses dry

spot-free. For best dishwashing results, water should be 120°F

(49°C) as it enters the dishwasher. Loads may not wash as well if

the water temperature is too low. Water that is too hot can make

some soils harder to remove and cause certain detergent

ingredients not to function. Ifyour water heater is located far from

the dishwasher, it may be necessary to run the hot water at the

faucet closest to the dishwasher to minimize the amount of cold

water in the water line.

To check water temperature

Run hot water at the faucet closest to your dishwasher for at

least 1 minute.

Place a candy or meat thermometer in a glass measurinc

cup.

3. Check the temperature on the thermometer as the water is

running into the cup.

Additional efficiency tips

• To save water, energy and time, do not rinse dishes before

putting them into the dishwasher.

Choose the cycle that describes the most difficult soil on your

dish load.

Do not worry about mixed loads. Any item that is dishwasher

safe can be washed using any cycle. (See "NOTES:" in the

"Loading Silverware Basket" section.)

Use a delay feature to run your dishwasher during off-peak

hours. Local utilities recommend avoiding heavy usage of

energy at certain times of day. (See "Option Selections and

Adjustments.")

Use a rinse aid to improve drying.

Use cycles or options that add extra heat to the wash or rinse

portion of the cycle for better performance.

Run your dishwasher with full loads. Run a rinse cycle after

meals until the dishwasher is full.

If your home is equipped with a water softener, you may want

to avoid starting the dishwasher during the regeneration of

the softener, since this may contribute to poor wash

performance.

Select the wash cycle desired. The indicator is lit above the selected cycle. Press the Start/Resume button.

NOTE: Please refer to "Detergent Use" for recommended detergent dispenser sections and powdered detergent amounts to use,

Heavy

Use this cycle for heavily

soiled, everyday dishes.

Standard Cycles - when to use

(These cycles use less energy and time.)

Pre Wash 1

Pre Wash 2

Main Wash 149°F (65°C)

Rinse 1

Rinse 2

Final Rinse 149°F (65°C)

Dry

Normal

Use this cycle for normally

soiled dishes for optimum

energy use.

Pre Wash

Main Wash 131°F (55°C)

Rinse

Final Rinse 131°F (55°C)

Dry

Quick Clean

Use this cycle for a quick

wash and light dry to clean

up cookware prior to

entertaining. This cycle

uses a shortened dry time.

Towel drying may be

needed.

Main Wash 113°F (45°C)

Rinse

Final Rinse 113°F (45°C)

Light/China

Use this cycle for china and

crystal. This cycle uses a

gentle light wash and gentle

dry.

Pre Wash

Main Wash 113°F (45°C)

Rinse

Final Rinse 122° F (50°C)

Dry

Rinse

Use this rinse

cycle for rinsing

dishes, glasses,

and silverware

that will not be

washed right

away.

Pre Wash

Of'{H/_ Hi Temp Wash Cycles - when to use

(The red indicator is lit when this cycle is selected.)

Heavy Normal Quick Clean Light/China

Use this cycle for heavily Use this cycle for normally Use this cycle for a quick Use this cycle for lightly

soiled, everyday dishes and soiled dishes for optimum wash and light dry for lightly soiled china and crystal.

hard-to-clean cookware, wash and dry performance, soiled dishes. Towel drying This cycle uses a gentle

},,.

Pre Wash 1

Pre Wash 2

Pre Wash 3

Main Wash 149°F (65°C)

Rinse 1

Rinse 2

Final Rinse 163°F (73°C)

Dry

Pre Wash 1

Pre Wash 2

Main Wash 144°F (62°C)

Rinse

Final Rinse 140°F (60°C)

Dry

may be needed.

Pre Wash

Main Wash 131°F (55°C)

Rinse

Final Rinse 122°F (50°C)

light wash and gentle dry.

Pre Wash

Main Wash 122°F (50°C)

Rinse

Final Rinse 131° F (55°C)

Dry

Rinse

Use this rinse

cycle for rinsing

dishes, glasses,

and silverware

that will not be

washed right

away.

Pre Wash

NOTE: Wash times can vary depending on the incoming water temperature, type of dish load, and whether the drawer has been

opened during the wash.

To end a wash cycle in mid-cycle, press the Power button.

Any water in the drawer will be pumped out.

To pause the drawer during its wash cycle, press START/

RESUME and wait for 3 beeps before opening.

You can add an item anytime before the main wash starts. Open

the drawer and check the detergent amount. If the detergent is

still visible, you can add items.

To add items

1. Press START/RESUME and wait for 3 beeps before opening

the drawer.

Restart by pressing START/RESUME.

IMPORTANT: Forcing the drawer open in mid-cycle may cause

damage to the dishwasher.

NOTE: If the drawer is operating and a power failure occurs, it

will stop. The drawer may not be opened during this time. When

the power supply resumes, the drawer will restart in the same

part of the wash cycle.

Press the Power button to end the current cycle. Wait for the

drawer to drain.

When the draining stops, open the drawer.

Press the desired wash cycle button to select the desired

wash cycle. The lighted indicators will progress until the

desired cycle is selected.

OR o_

4. Check the detergent dispensers. They must be filled properly

for the new cycle. (See "Detergent Use.")

5. Close the drawer.

6. Press START/RESUME.

2. If the detergent is still visible in the detergent dispenser, you

may add the item.

3. Close the drawer firmly.

4. Restart by pressing START/RESUME.

IMPORTANT: Forcing the drawer open in mid-cycle may cause

damage to the dishwasher.

After using the dishwasher, you may want to use or adjust some

of the preset options available to suit your needs. You can select

the Lock button, Control lock, Keylock or Delay Start mode. You

can adjust the settings for Rinse Aid, Auto Power, and End of

Wash Program beeps.

NOTE: Indicator light colors vary depending on your dishwasher.

See following descriptions.

Lock bu_on

The Lock button activates/deactivates the Control lock or the

Keylock functions.

Use the Lock button to prevent unintended use of the

dishwasher. You can also use either of the lock options to prevent

unintended cycle or option changes during a wash cycle.

Control lock

• The Control lock feature disables all of the buttons on the

dishwasher.

1. To activate, press and hold the Lock button until you hear

1 beep (about 3 seconds).

2. To cancel, press and hold the Lock button until the light

disappears.

Keylock

• The Keylock feature locks the drawer closed and disables the

dishwasher and all buttons.

1. To activate, press and hold the Lock button until you hear

the 2 beeps (about 5 seconds).

2. To cancel, press and hold the Lock button until the light

disappears.

Delay Start mode

The start of the selected wash cycle can be delayed from 1 to

12 hours.

To activate the Delay Start

1. Press and hold the Start/Resume button until the light above

turns orange or lavender depending on model.

2. The dishwasher will beep as you hold down the button. Each

"beep" represents an hour delay, so for each beep while the

button is pressed an additional hour delay will be

programmed until the desired delay time is reached.

3. Make sure the drawer is closed.

4. The dishwasher will start after the set delay time has elapsed.

To cancel the Delay Start

1. Press the Power button to turn off the dishwasher or hold the

Start/Resume button until the light turns green or blue

(depending on model).

Power button Start/Resume button

To enter the Option Adjustment Mode

1. Press the Power button to turn the dishwasher to the Normal

Operating Mode.

2. Press and hold the HI TEMP and Lock buttons at the same

time for 5 seconds. When the buttons have been correctly

pressed, one long beep is sounded and the Start/Resume

light is red.

3. Release the HI TEMP and lock buttons.

4. Use the appropriate buttons on the control panel to make the

necessary adjustments. These are explained below.

5. Once the changes have been made, press the Power button

to return to the Normal Operating Mode.

NOTE: The dishwasher automatically saves these changes.

To adjust the Rinse Aid setting

NOTE: If there is excessive foam at the end of the wash, reduce

the rinse aid dispenser setting. If dishes are wet or streaky after

drying, increase the rinse aid dispenser setting. (See "How much

rinse aid to use" in "Rinse Aid Dispenser" section.)

1. Enter the Option Adjustment Mode as explained above. The

light above the Start/Resume button is red to indicate this

setting has been chosen.

2. The current Rinse Aid setting is shown on the wash cycle

indicator panel. The number of red lights lit on the panel

shows what the current rinse aid setting is. For example, if

4 red lights are lit on the panel, then the Rinse Aid setting is

at 4.

o i o = o

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

Example of Rinse Aid setting at 4

3. Press the Lock button to increase or decrease the Rinse Aid

setting, the red lights will scroll up to 5 and then start from

1 again.

4. Once you have selected the desired Rinse Aid setting, press

the Power button to return to the Normal Operating Mode.

To remove the Auto Power setting

When the dishwasher leaves the factory, it is programmed to

automatically power up whenever the drawer is opened even if

the Power pad has not been pressed. The dishwasher will not

start washing until the drawer is closed and the Start/Resume

button has been pressed. If you do not want the dishwasher to

automatically power up, this feature can be turned off.

1. Enter the Option Adjustment Mode as explained at the

beginning of this section.

2. Press the Start/Resume button until the light above is orange

or lavender (depending on model), and the light above the

HI TEMP button is red. If it is not, press the Power button to

return to Normal Operating Mode and start again.

3. Press the Lock button to turn the Auto Power feature on or

off. If all the red lights on the wash cycle panel are off, then

the Auto Power feature has been turned off.

4. Press the Power button to return to the Normal Operating

Mode.

Auto Power On

Q fib D I D

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

Auto Power Off

0 (D 0 CD 0

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

To remove the "End of Wash" cycle beeps

The factory has programmed the dishwasher to beep 6 times at

the end of the selected wash cycle. This feature can be turned

off.

1. Enter the Option Adjustment Mode as explained at the

beginning of this section.

2. Press the Start/Resume button until the light above is green

or blue (depending on model), and the HI TEMP light is red. If

it is not, press POWER to start again.

3. Press the Lock button to turn the "End of Wash" cycle beeps

on or off as desired. The "End of Wash" cycle beeps have

been turned off if all the red lights on the wash cycle panel are

off.

Press the Power button to return to the Normal Operating

Mode.

Beeps On

Q Q Q u W

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

O O O O O

Beeps Off HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

WASHING SPECIAL ITEMS

If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.

Material Dishwasher Safe?/Comments

Aluminum Yes

High water temperature and detergents

can affect finish of anodized aluminum.

Disposable

Aluminum

Do not wash throwaway aluminum pans

in the dishwasher. These might shift

during washing and transfer black marks

to dishes and other items.

Bottles and Cans No

Wash bottles and cans by hand. Labels

attached with glue can loosen and clog

the spray arms or pump and reduce

washing performance.

Cast Iron No

Seasoning will be removed, and iron

will rust.

China/ Yes

Stoneware Always check manufacturer's

recommendations before washing.

Antique, hand-painted, or over-the-glaze

patterns may fade. Gold leaf can discolor

or fade.

Material Dishwasher Safe?/Comments

Hollow-Handle No

Knives Handles of some knives are attached to

the blade with adhesives which can

loosen if washed in the dishwasher.

Pewter, Brass, No

Bronze High water temperatures and detergent

can discolor or pit the finish.

Disposable No

Plastics Cannot withstand high water

temperatures and detergents.

Plastics Yes

Always check manufacturer's

recommendations before washing.

Plastics vary in their capacity to

withstand high temperatures and

detergents.

Stainless Steel Yes

Run a rinse cycle if not washing

immediately. Prolonged contact with

food containing salt, vinegar, milk

products, or fruit juice can damage

finish.

Crystal

Yes

Always check manufacturer's

recommendations before washing. Some

types of leaded crystal can etch with

repeated washing.

Gold No

Gold-colored flatware will discolo_

Glass Yes

Milk glass yellows with repeated

dishwasher washing.

Sterling Silver or

Silver Plate

Yes

Run a rinse cycle if not washing

immediately. Prolonged contact with

food containing salt, acid, or sulfide

(eggs, mayonnaise, and seafood) can

damage finish.

Tin No

Can rust.

Wooden Ware No

Wash by hand. Always check

manufacturer's instructions before

washing. Untreated wood can warp,

crack, or lose its finish.

DISHWASHER CARE

Cleaning the exterior

In most cases, regular use of a soft, damp cloth or sponge and a

mild detergent is all that is necessary to keep the outside of your

dishwasher looking nice and clean. Dry with a clean, lint-free

cloth.

Cleaning the interior

To clean the Spray Arm

1. Gently remove the base rack. Lift from the back end first so

that you do not bump the detergent and rinse aid dispenser.

2. Lift the spray arm and shake out any foreign material.

3. Rinse the spray arm under running water and wipe it with a

damp cloth.

4. Place the spray arm back onto the impeller.

To clean the Drain Filter

Hard water minerals can cause a white film to build up on the

inside surfaces.

Do not clean the dishwasher interior until it has cooled. You may

want to wear rubber gloves. Do not use any type of cleanser

other than dishwasher detergent because it may cause foaming

or sudsing.

To clean interior

Make a paste with powdered dishwasher detergent on a damp

sponge and clean.

See the vinegar rinse procedure in "Spotting and filming on

dishes" in "Troubleshooting."

NOTE: Run a Normal cycle with detergent after cleaning the

interior.

Cleaning the Spray Arm, Drain Filter and Filter Plate

A. Spray arm

B. Drain filter

C. Outer ring

D. Filter plate

E. Center ring

F Impeller

1. If the base rack is in place, lift up the drain filter access panel

located under the silverware basket.

2. Lift and remove the drain filter out of the drawer.

3. Empty the drain filter, rinse under clean running water, and

place back into the drain space.

4. Make sure that the drain filter is flush with the filter plate.

To clean the Filter Plate

1. Make sure that the dishwasher is cool before you start

cleaning the filter plate and follow the instructions for

removing the spray arm and drain filter.

2. In the center of the filter plate, there are two rings -- an outer

ring and a center ring. Hold the center ring still and turn the

outer ring counterclockwise, 1/8turn, until the tabs and

notches in both rings align. This will release the filter plate.

A. Impeller

B. Center ring

C. Outer ring

Correct locking position of Filter Plate with motor assembly

3. Lift up the filter plate. Remove any soil, wash in hot soapy

water, and rinse thoroughly in clean water. The bottom of the

drawer can be wiped with a damp cloth.

4. Replace the filter plate so that it lies flat in the base of the

drawer.

5. Align the outer ring making sure that the tabs align with the

notches in the center ring.

6. To lock the filter plate into position, hold the center ring while

you turn the outer ring clockwise until the lines on the two

rings align. (See illustration above.)

7. When properly installed, you should not be able to move the

filter plate.

IMPORTANT: For best performance, the drawer must be used

with the filter plate, drain filter, and spray arm correctly in place.

Check the drain air gap anytime your dishwasher isn't draining

well.

Some state or local plumbing codes require the addition of a

drain air gap between a built-in dishwasher and the home drain

system. If a drain is clogged, the drain air gap protects your

dishwasher from water backing up into it.

The drain air gap is usually located on top of the sink or

countertop near the dishwasher. To order adrain air gap, call your

local dealer; or call us or your designated service center and ask

for Part Number 300096. For more information, see "Assistance

or Service."

NOTE: The drain air gap is an external plumbing device that is

not part of your dishwasher. The warranty provided with your

dishwasher does not cover service costs directly associated with

the cleaning or repair of the external drain air gap.

To clean the drain air gap

Clean the drain air gap periodically to ensure proper drainage of

your dishwasher. Follow the cleaning instructions provided by the

manufacturer. With most types, you lift off the chrome cover.

Unscrew the plastic cap. Then check for any soil buildup. Clean if

necessary.

Storing for the summer

Protect your dishwasher during the summer months by turning

off the water supply and power supply to the dishwasher.

Winterizing your dishwasher

Protect your dishwasher and home against water damage due to

freezing water lines. If your dishwasher is left in a seasonal

dwelling or could be exposed to near freezing temperatures, have

your dishwasher winterized by authorized service personnel.

TROUBLESHOOTING

Firsttry the solutions suggested here and possibly avoid the cost of a service call...

Dishwasher is not operating property

• Dishwasher does not run or stops during a cycle

Is the drawer closed tightly?

Is the correct wash cycle selected? Refer to"Wash Cycles."

Is there power to the dishwasher? Has a household fuse

blown, or has a circuit breaker tripped? Replace the fuse or

reset the circuit breaker. If the problem continues, call an

electrician.

Is an Error Code indicated? (See "Error Codes.")

• Dishwasher will not fill

Is the water shut-off valve (if installed) turned on?

• Dishwasher seems to run too long

Is the water supplied to the dishwasher hot enough? The

drawer runs longer while heating water. Refer to the

"Performance Tips" section.

A delay automatically occurs in some wash and rinse cycles

until the water reaches the proper temperature.

• Water remains in the dishwasher

Is the cycle complete? A small amount of water will remain in

the drain filter area.

• Excess water in the dishwasher

Are there blocked drain filters? Clean the drain filter and filter

plate. (See "Cleaning.")

Is the drain hose bent or kinked? Straighten or unblock

hoses. (See "Error Codes.")

• Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle

once or twice a day until you have a full load.

Does the drawer have a new plastic smell? Run a vinegar

rinse as described in "Spotting and filming on dishes."

Dishes are not completely clean

• Food soil left on the dishes

Is the dishwasher loaded correctly? If not, it can block

rotation of the spray arm. Refer to the "Dishwasher Loading"

section.

Can the spray arm rotate freely? Check that no items are

obstructing the spray arm path.

Are the spray arm holes blocked? Clean the spray arm. See

"Cleaning the Spray Arm, Drain Filter and Filter Plate" in

"Cleaning" section.

Are the drain filter and filter plate clean and installed

correctly? See "Cleaning the Spray Arm, Drain Filter and Filter

Plate" in "Cleaning" section.

Is the base rack correctly installed? Refer to "Loading Rack."

Is the water temperature too low? For best dishwashing

results, water should be 120°F (49°C) as it enters the

dishwasher. Refer to the "Performance Tips" section.

Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Refer to the

"Detergent Use" section. Do not use less than 1 tsp (5 mL)

per load. Detergent must be fresh to be effective. Store

detergent in a cool, dry area. Heavy soil and/or hard water

generally require extra detergent.

Is the pump or spray arm clogged by labels from bottles and

cans?

Is the home water pressure high enough for proper

dishwasher filling? Home water pressure should be 20 to

120 psi (138 to 828 kPa) for proper dishwasher fill. Ifyou have

questions about your water pressure, call a licensed, qualified

plumber.

Are high suds slowing the wash arm? Do not use soap or

laundry detergents. Use recommended powdered

dishwasher detergents only.

Spots and stains on dishes

• Spotting and filming on dishes

Is your water hard or is there a high mineral content in your

water? Conditioning the final rinse water with a liquid rinse

aid helps eliminate spotting and filming. Keep the rinse aid

dispenser filled.

Is the water temperature too low? For best dishwashing

results, water should be 120°F (49°C) as it enters the

dishwasher. Refer to the "Performance Tips" section.

Did you use the correct amount of effective detergent? Use

recommended powdered dishwasher detergents only. Refer

to the "Detergent Use" section. Do not use less than 1 tsp

(5 mL) per load. Detergent must be fresh to be effective. Store

detergent in a cool, dry area. Heavy soil and/or hard water

generally require extra detergent.

Is the home water pressure high enough for proper

dishwasher filling? Home water pressure should be 20 to

120 psi (138 to 828 kPa) for proper drawer fill. If you have

questions about your water pressure, call a licensed, qualified

plumber.

NOTE: To remove spots and film from dishes, try a white

vinegar rinse. This procedure is intended for occasional use

only. Vinegar is an acid and using it too often could damage

your drawer.

1. Wash and rinse dishes. Remove all silverware or metal

items.

2. Put 1 cup (250 mL) white vinegar in a glass or

dishwasher-safe measuring cup on the rack.

3. Run the dishwasher through a complete washing cycle.

Do not use detergent. Vinegar will mix with the wash

water.

Is the correct cycle selected? Refer to "Wash Cycles."

• Silica film or etching (silica film is a milky, rainbow-

colored deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain

types of glassware. This is usually caused by some

combination of soft or softened water, alkaline washing

solutions, insufficient rinsing, overloading the drawer, and the

heat of drying. It might not be possible to avoid the problem,

except by hand washing.

To slow this process use a minimum amount of powdered

detergent but not less than 1 tsp (5 mL) per load. Use a liquid

rinse aid and underload the drawer to allow thorough rinsing.

Silica film and etching are permanent and cannot be

removed.

• White spots on cookware with nonstick finish

Has the dishwasher detergent removed cookware

seasoning? Reseason cookware after washing in the drawer.

• Brown stains on dishes and drawer interior

Does your water have high iron content? Rewash dishes

using 1-3 tsp (5-15 mL) of citric acid crystals added to the

detergent dispenser main wash section. Do not use

detergent. Follow with a Normal wash cycle with detergent. If

treatment is needed more often than every other month, the

installation of an iron removal unit is recommended.

• Black or gray marks on dishes

Are aluminum items rubbing dishes during washing?

Disposable aluminum items can break down in the

dishwasher and cause marking. Hand wash these items.

Remove aluminum markings by using a mild abrasive cleaner.

• Orange stains on plastic dishes or dishwasher interior

Are large amounts of tomato-based foods on dishes placed

in the dishwasher? It may be necessary to use a stain

removal product to remove stains from your dishwasher.

Stains will not affect dishwasher performance.

Dishes do not dry completely

• Dishes are not dry

Did you load your drawer to allow proper water drainage? Do

not overload. Refer to the "Dishwasher Loading" section. Use

a liquid rinse aid to speed drying. You may need to adjust the

Rinse Aid setting. (See "Option Selections and Adjustments.")

Are the plastics wet? Plastics often need towel drying.

Is the rinse aid dispenser empty? Refer to the "Rinse Aid

Dispenser" section.

Dishes are damaged during a cycle

• Chipping of dishes

Did you load the dishwasher properly? Load the dishes and

glasses so they are stable and do not strike together from

washing action.

NOTE: Antiques, feather-edged crystal, and similar types of

china and glassware might be too delicate for automatic

dishwashing. Wash by hand.

Excessive pump noise

• Are the filter plate and/or spray arm correctly placed?

• Is there water in the pump area? It is normal during first use

or after the dishwasher has not been used for long periods of

time. Run the drawer through a wash cycle.

Water leaking

• Is the drain hose disconnected from a waste pipe?

Reconnect the drain hose to the waste pipe.

• Is the supply inlet hose correctly connected? Make sure that

the inlet hose is connected securely.

• Are there other leaks? Turn off water and power supplies to

the dishwasher. Contact an authorized service agent. (See

"Assistance or Service.")

Dishwasher will not open

• Is the Keylock option selected? Turn Lock off. Hold down the

Lock button until the green light disappears and/or press the

Power button to open the drawer. Refer to "Option Selections

and Adjustments."

Intermittent beeping

• The dishwasher is in a pause mode. Close the drawer and

press the Start/Resume button.

Continuous beeping

• A failure has occurred. (See "Error Codes.")

How to recognize an Error Code

When a failure has occurred, the dishwasher will continuously beep every second and the Start/Resume indicator light will be red. The

error code will be displayed with the red light indicators on the wash cycle panel. (For specific failures see the illustrations below.)

To solve a failure issue

1. Press the Power button to remove the error code.

2. If the error code and continuous beeps cannot be removed by pressing POWER, turn the power off at the power supply.

3. Check the chart below and correct the failure wherever possible.

4. After attending to the failure, turn the dishwasher on at the power supply.

5. If the error code and continuous beeps remain, turn the water and power supply off to the dishwasher.

6. Call your authorized service center. (See "Assistance or Service.") Advise the technician of the error code that has appeared on the

dishwasher.

Error Codes

O O O O qil

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

O O O O O

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

O O O g

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

0 0 I 0 0

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

O I O O l

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

a O O O g

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

Possible Causes

Flood switch has been activated.

Motor problem.

Temperature sensor failed.

Temperature sensor or element failure.

Electronics malfunction.

Fill failure.

What to do

Turn the water and power supply to the

dishwasher off and call your authorized

service center.

Call your authorized service center.

Make sure that water going in through the

inlet hose is not hotter than 149°F (65°C).

(Refer to "To check water temperature" in

the "Performance Tips" section.)

Call your authorized service center.

• Turn on the dishwasher water supply.

• Make sure the spray arm can rotate

around the center. If the dishwasher is

full of water, it will need to be emptied

manually.

you have any questions about operating the product, please contact the Customer eXperience Center. (See "Assistance or Service.'"

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only factory-specified parts. These parts will fit right and

work right, because they are made with the same precision used

to build every new KITCHENAID _ appliance.

To locate factory-specified parts in your area, call us or your

nearest designated service center.

Call the KitchenAid Customer eXperience Center

toll free: 1-800-422-1230.

Our consultants provide assistance with:

• Featuresand specifications on our full line of appliances.

• Installation information.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish-speaking,

hearing-impaired, limited-vision, etc.).

Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in the United States.

To locate the KitchenAid designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to us with any

questions or concerns at:

KitchenAid Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Call the KitchenAid Canada Customer Interaction Centre toll free:

1-800-807-6777.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Warranty information.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to us with any

questions or concerns at:

KitchenAid Canada

Customer Interaction Centre

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

La page est en cours de chargement...

KitchenAid KUDD01SSPA0 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KUDD01SSPA0

Catégorie: Lave-vaisselle

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid KUDD01SSPA0 Owner's manual

KitchenAid KUDD01SSPA0 Le manuel du propriétaire

KitchenAid KUDD01SSPA0 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents