July 2021
QSG1_B_EN
E1 Outdoor
Quick Start Guide
@ReolinkTech https://reolink.com
58.03.001.0210
English English1 2
What's in the Box
E1 Outdoor
4.5m Power
Extension Cable
Mounting
Template
1m
Network Cable
Quick
Start Guide
Surveillance
Sign
Camera Bracket Power Adapter Reset Needle Pack of Screws
EN
Content
What's in the Box 2
Camera Introduction 3
Set up the Camera 4
Install the E1 Outdoor Camera 7
Troubleshooting 10
Specications 10
Notication of Compliance 11
English English3 4
Set up the CameraCamera Introduction
Wired Setup
It is recommended that the initial setup be completed with the Ethernet cable. You may follow the
steps below to set up your camera.
Step 1 Connect the camera to a LAN port on your router with an Ethernet cable.
Step 2 Use the power adapter provided to power on the camera.
Your Smart Device
Power Cable
Reolink E1 Outdoor
Power Adapter
Network Cable
Router
Reset Button
Micro SD Card Slot
Daylight Sensor
Spotlight
Infrared Lights
Lens
Status LED
Built-in Mic
Speaker
Network Cable
Power Cable
Meaning of the Status LED:
Status/LED Blinking Solid
LED in Blue WiFi connection failed
Camera is starting upWiFi is not congured
WiFi connection succeeded
* Press for more than ve seconds to
restore the device to default settings.
* Rotate the lens to nd the
reset button and the SD card slot.
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
E1 Outdoor
English English5 6
Step 3 Download and launch the Reolink App or Client software, and follow the onscreen
instructions to nish initial setup.
Scan to download the Reolink App.
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
Wireless Setup
If you set up E1 Outdoor without the Ethernet cable, you may follow the steps below.
Step 1 Use the power adapter provided to power on the camera.
Step 2 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
Scan the QR code on the device and follow the onscreen instructions to nish initial setup.
NOTE: If you access the camera via the Reolink Client, you may click the Add Device icon and
choose the UID option to enter the UID of your camera. The UID is on the camera body
(right below the QR code).
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
• On Smartphone
• On PC
English English7 8
Install the E1 Outdoor Camera
Mount the Camera to the Wall
For outdoor use, E1 Outdoor must be installed upside down for better waterproof performance.
Pull the button of the security mount and
unscrew the bracket to separate the two
parts.
Drill holes in accordance with the mounting
template and screw the security mount to
the wall.
Screw the bracket to the bottom of the camera.
Choose a proper direction of the camera
and then align the bracket to the security
mount and lock the camera in place by
turning anti-clockwise.
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
NOTE: Use the drywall anchors included in the package if needed.
1 2
3 4
English English9 10
Troubleshooting
Specications
Camera is Not Powering on
Hardware
Software Features
General
WiFi Connection Failed During Initial
Setup Process
Mount the Camera to the Ceiling
Pull the button of the security mount and unscrew the ceiling bracket from the mount.
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit
clockwise to lock it in position.
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
1
2
3
“click”
“click”
open close
If your camera is not powering on, please try
the following solutions:
• Plug the camera into another outlet.
• Use another 12V power adapter to power on
the camera.
If these won’t work, please contact Reolink
Support. Display Resolution: 5MP
IR Distance: 12 meters (40 ft)
Pan/Tilt Angle: Horizontal: 355° / Vertical: 50°
Power Input: DC 12V/1A
Frame Rate: 20fps (default)
Audio: Two-way audio
IR Cut Filter: Yes
Operating Frequency: 2.4/5GHz Dual-band
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
If the camera failed to connect to WiFi, please
try the following solutions:
• Please ensure your have entered the correct
WiFi password.
• Put your camera close to your router to
ensure a strong WiFi signal.
• Change the encryption method of the WiFi
network to WPA2-PSK/WPA-PSK (safer
encryption) on your router interface.
• Change your WiFi SSID or password and
make sure that SSID is within 31 characters
and password is within 64 characters.
• Set your password using only the characters
on the keyboard.
If these won’t work, please contact Reolink
Support.
English English11 12
Size: 84.7×117.8 mm
Weight: 380g
Notication of
Compliance
FCC Compliance Statement
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.
This marking indicates that this product
should not be disposed with other household
wastes throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
Correct Disposal of This Product
Simplied EU Declaration of
Conformity
This product comes with a 2-year limited
warranty that is valid only if purchased from
Reolink Ocial Store or a Reolink authorized
reseller. Learn more:
https://reolink.com/warranty-and-return/.
Limited Warranty
NOTE: We hope that you enjoy the new
purchase. But if you are not satised with
the product and plan to return, we strongly
suggest that you reset the camera to factory
default settings and take out the inserted SD
card before returning.
Use of the product is subject to your
agreement to the Terms of Service and
Privacy Policy at reolink.com.
Keep out of reach of children.
Terms and Privacy
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
• this device may not cause harmful
interference, and
• this device must accept any interference re-
ceived, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment. This equipment
shall be installed and operated with
minimum distance 20cm between the
radiator & body.
FCC RF Exposure Warning
Statements
systems or contact the retailer where the
product was purchased. They can take this
product for environment safe recycling.
English13
2412MHz---2472MHz (19dBm)
5150MHz---5350MHz (18dBm)
5470MHz---5725MHz (18dBm)
If you need any technical help, please visit
our ocial support site and contact our
support team before returning the products,
https://support.reolink.com.
OPERATING FREQUENCY
(the maximum transmitted power)
Technical Support
By using the Product Software that is
embedded on the Reolink product, you agree
to the terms of this End User License
Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
End User License Agreement
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any inter-
ference, including interference that may
cause undesired operation of the device.
L’émetteur/récepteur exempt de licence
contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences
et Développement économique Canada
applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux
deux conditions suivantes :
ISED Statements
(1) L’ appareil ne doit pas produire de
brouillage;
(2) L’ appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’ en compromettre le
fonctionnement.
Radio Frequency Exposure
Statement for IC
This equipment complies with IC exposure
limits set forth for an uncontrolled
environment. The device can be used in
portable exposure conditions. This
equipment shall be installed and operated
with minimum distance 20cm between
the radiator & body.
Cet équipement est conforme aux limites
d’exposition IC établies pour un
environnement non contrôlé. L’appareil
peut être utilisé dans des conditions
d’exposition portables. Cet équipement doit
être installé et utilisé avec une distance
minimale de 20 cm entre le radiateur et le
corps.
Operation of this device is restricted to
indoor use only. (W52 band)
Le fonctionnement de cet appareil est limité à
une utilisation en intérieur uniquement.
(W52 band)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
dans d''autres langues
- English: REOLINK E1 Outdoor User guide
Documents connexes
-
REOLINK E1 Outdoor Manuel utilisateur
-
REOLINK FE-W Mode d'emploi
-
REOLINK Wireless Home Security Camera, Reolink 4MP Indoor WiFi Camera System, 2.4ghz/5ghz Dual-Band Pet Camera, Pan Tilt Baby Monitor, 7 Day Free Cloud/SD Card Storage, Two-Way Audio, Night Vision, E1 Pro Mode d'emploi
-
REOLINK Argus PT (Out of Use) Manuel utilisateur
-
REOLINK Argus Eco Manuel utilisateur
-
-
REOLINK WiFi IP Camera Mode d'emploi
-
REOLINK E1 Mode d'emploi
-
REOLINK Lumus Outdoor WiFi Security Camera Manuel utilisateur
-
REOLINK E1 Zoom Mode d'emploi
