for Living 9-Cube Storage Organizer Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Assembly Instructions
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
NEED HELP? GIVE US A CALL!
WE’RE HERE FOR YOU.
TOLL-FREE:
1-877-483-6759
Product No. 068-0410-4
9-Cube Organizer
From your rst apartment to
downsizing your family home,
For Living is a great place to start.
Uncomplicate your life with timeless
style and reliable quality that delivers
everyday solutions for your home.
Let us know how our products
work for you. Rate and review at
canadiantire.ca
2
Needed for Assembly:
Table of Contents
3
Important Safety Instructions 3
Parts List 4
Step-by-step Guide 7-17
Caring For Your Item 18
Warranty 19
Warning! Please use your furniture correctly and safely. Improper use
can cause safety hazards, or damage to your furniture or household
items. Carefully read the following safety information.
Look out for: What can happen: How to avoid the problem:
• Overloaded shelves.
• Improper loading can cause the
product to be top-heavy.
• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.
• Never exceed the weight limits
shown in the instructions.
• Work from bottom to top when
loading shelves. Place the heavier
items on the lower shelves.
• Improperly moving furniture that
is not designed and equipped with
casters.
• Furniture can tip over or break if
improperly moved.
• Physical injury. Furniture can be
very heavy.
• Unload shelves from top to bottom
before moving the furniture.
• Do not push furniture, especially on
a carpeted oor. Have a friend help
you lift the item and set it in place.
• This unit must be positioned against
a wall.
• Children climbing on the shelves
can cause the product to tip. • Risk of injury or death. • Do not allow children to climb on
the shelves. Avoid placing items like
toys or candy on upper shelves.
• Always use the tipping restraint kit
provided with product.
• Placing TVs on furniture items that
are not designed to support a televi-
sion is hazardous.
• Risk of injury or death. TVs can
be very heavy. Plus the weight and
location of the picture tube tends to
make TVs unbalanced and prone to
tipping forward.
• This product is not designed to
support a television.
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Hammer 2 people
Parts List
Item Description Thumbnail Quantity
Parts List
4
EBack 5
DUpright 6
CShelf 3
BTop 1
AEnd 2
Exploded PartsExploded Parts
5
E
C
DA
B
A
D
DC
C
E
E
D
D
D
E
E
Hardware List
Item Description Thumbnail Quantity
6
F Wood Dowel 12
G Applique Card 1
HNail 60
J 1-1/2” Flat Head Screw 28
96 Furniture Tipping
Restraint Kit 1
Step-by-step Guide
7
X
D
DX6 FX12
Step 1
REQUIRES PART D, F
Assemble your unit on a carpeted oor or on the empty
box to avoid scratching your unit or the oor.
Insert twelve WOOD DOWELS (F) into the UPRIGHTS (D) as
shown.
X
D
X
D
X
D
X
D
X
D
8
Step-by-step Guide
CX1
BX1
DX2 JX4
Step 2
REQUIRES PART B, C, D, J
Push the WOOD DOWELS in two of the UPRIGHTS (D) into
the holes in the TOP (B).
Fasten one SHELF (C) to the UPRIGHTS (D). Use four 1-1/2”
FLAT HEAD SCREWS (J).
NOTE: You may want to start each SCREW a few turns
before completely tightening any of them.
Surface with holes
Surface with
more holes
B
D
C
D
Un nished edge
CAUTION:
Do not stand the unit upright
without the BACK fastened.
The unit may collapse.
9
Step-by-step Guide
Step 3
REQUIRES PART A, J
Fasten the ENDS (A) to the TOP (B) and SHELF (C). Use
eight 1-1/2” FLAT HEAD SCREWS (J).
NOTE: You may want to start each SCREW a few turns
before completely tightening any of them.
BX2 X8
J
A
B
C
A
A
Un nished edge
Un nished edge
10
Step-by-step Guide
DX2
Step 4
REQUIRES PART C, D, J
Push the WOOD DOWELS in two of the UPRIGHTS (D) into
the holes in the SHELF (C).
Fasten a SHELF (C) to the UPRIGHTS (D). Use four 1-1/2”
FLAT HEAD SCREWS (J) into the exact holes shown in
the SHELF.
NOTE: You may want to start each SCREW a few turns
before completely tightening any of them.
CX1
X4
J
Surface with
more holes
D
C
C
D
Un nished edge
11
Step-by-step Guide
Step 5
REQUIRES PART C, D, J
Fasten the ENDS (A) to the SHELF (C). Use four 1-1/2” FLAT
HEAD SCREWS (J).
NOTE: You may want to start each SCREW a few turns
before completely tightening any of them.
Push the WOOD DOWELS in the remaining UPRIGHTS (D)
into the holes in the SHELF (C) as shown.
Fasten the remaining SHELF (C) to the UPRIGHTS (D). Use
four 1-1/2” FLAT HEAD SCREWS (J) into the exact holes
shown in the SHELF.
NOTE: You may want to start each SCREW a few turns
before completely tightening any of them.
C
A
A
C
D
D
Surface with
fewer holes
C D X2X1
X8
J
Un nished edge
12
Step-by-step Guide
Step 6
REQUIRES PART J
Fasten the ENDS (A) to the SHELF (C). Use four 1-1/2” FLAT
HEAD SCREWS (J).
NOTE: You may want to start each SCREW a few turns be-
fore completely tightening any of them.
C
A
X4
J
A
13
Step-by-step Guide
Step 7
REQUIRES PART E, H
Unfold the BACKS (E) and lay them over your unit.
Make equal margins along all four edges of the BACKS (E).
Push on opposite corners of your unit if needed to make
it “square”.
Fasten the ve BACKS (E) to your unit using
the NAILS (H).
HX60
EX5
Un nished
surface
E
EE
Un nished
surface
Un nished
surface
E
Un nished
surface
E
Un nished
surface
CAUTION:
Do not stand the unit upright
without the BACK fastened.
The unit may collapse.
14
Step-by-step Guide
Step 8
REQUIRES PART 96
Carefully stand your unit upright.
Use the FURNITURE TIPPING RESTRAINT KIT (96) for
added stability. Open the FURNITURE TIPPING RESTRAINT
KIT (96) and fasten the STRAP to the underneath
surface of the TOP (B) using the SHORT SCREW as shown.
B
Thread the short screw
through the hole in the
strap and into the TOP (B).
96 X1
96 X1
15
Step-by-step Guide
96 X1
Step 9
REQUIRES PART 96
Place your unit in its nal location against the wall.
NOTE: The following instructions show your unit being
fastened to a wall stud. If you are not fastening your unit to
a wall stud, go to the next step now.
1 - Locate the center of a stud in your wall near your unit
and mark it with a pencil. Drill a 1/8” hole on the mark and
into the stud in your wall.
2 - Fasten the unit to the wall. Thread the LONG SCREW
through the other end of the STRAP and into the 1/8” hole.
12
Mark and drill
a 1/8" hole into
the wall stud. Secure to wall stud
16
Step-by-step Guide
Step 10
REQUIRES PART 96
1 - With your pencil, strike a mark through the center of the
hole in the SAFETY STRAP. Drill a 3/8” hole on
the mark.
2 - While you squeeze the wings together, gently tap the
WALL ANCHOR from the FURNITURE TIPPING RESTRAINT
KIT (96) into the hole until it is even with the surface of
the wall.
3 - Turn the LONG SCREW through the hole in the
SAFETY STRAP and into the WALL ANCHOR.
NOTE: You will need to turn the LONG SCREW multiple
turns to completely tighten and secure your unit to the wall.
1
3
2
Mark and drill
a 3/8” hole into
the wall.
While you squeeze the
wings together, gently
tap the WALL ANCHOR
into the hole in the wall.
96 X1
96 X1
Wing
Wing
Secure to wall with WALL ANCHOR
17
Step-by-step Guide
GX1
Step 11
REQUIRES PART G
Peel APPLIQUES from the APPLIQUE CARD (G) and stick
them onto each visible SCREW head.
30 lbs.
60 lbs. total
60 lbs. total
60 lbs. total
Overall distributed weight for top surface,
for each shelf and the overall unit.
18
1
4
2
5
3
Caring For Your Item
Sandstone
Check all nuts and
bolts periodically
for tightness. When
required, tighten them
again.
This product is
intended for domestic
indoor use only.
Cleaning: Clean with your preferred furniture polish or a damp cloth. Wipe dry.
Do not push furniture,
especially on a
carpeted oor. Have
someone help you lift
heavy items and set it
in place.
The product should
be placed on a at
horizontal surface.
Always keep children
under close supervision
while they are using or
around this product.
Never leave children
unattended.
WarrantyWarranty
This For Living® product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Model No. 068-0410-4
1-Year Limited Warranty*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

for Living 9-Cube Storage Organizer Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues