Modern Forms FH-W2003 Slim Flush Mode d'emploi

Marque: Modern Forms

Modèle: FH-W2003 Slim Flush

Catégorie: Ventilateurs ménagers

Taper: Mode d'emploi

Slim Flush

Installation Instructions

works with the

Google Assistant

FH-W2003

Slim Instructions2

Please read and

save these instructions

before installation

DO NOT RETURN TO STORE

FH-W2003Slim Instructions 3

For all questions about your ceiling fan please read all included

instructions, installation procedures, troubleshooting guidelines

and warranty information before starting installation.

For missing parts or general inquiries call our trained technical staﬀ at:

1-866-810-6615 option 1

MON-FRI 8AM-8PM EST

Email: customerservice@modernforms.com

Or live chat at modernforms.com

For fast service have the following information below when you call:

1. Model Name and Number

2. Part Number and Part Description

3. Date Of Purchase and Purchase Location

1-866-810-6615 option 2

MON-FRI 8AM-8PM EST

Email: fansupport@modernforms.com

General Inquiries

Fan Support

FH-W2003

Slim Instructions4

For operation, maintenance, and troubleshooting information,

visit http://modernforms.com/fan-support/

To reduce the risk of electric shock, ensure electricity has been turned oﬀ at the circuit breaker

before beginning. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA

70” and local electrical codes. Electrical installation should be performed by a licensed electrician.

The fan must be mounted with a minimum of 7 ft. (2.1m) clearance from the trailing edge of

the fan blades to the floor and a minimum of 1.5 ft (0.5m) from the edge of the fan blades to the

surrounding walls. Never place objects in the path of the fan blades. To avoid personal injury or

damage to the fan and other items, please be cautious when working around or cleaning the fan.

To avoid electrical shock or damage to the motor or ﬁnish, do not use water or chemicals

when cleaning the fan or fan blades. A dry cloth or lightly dampened cloth will be suitable

for most cleaning.

After making electrical connections, spliced conductors should be turned upward and pushed

carefully up into the outlet box. The wires should be spread apart with the grounded conductor and

the equipment-grounding conductor on one side of the outlet box, and the ungrounded conductor

on the other side of the outlet box.

All set screws must be checked and re-tightened

where necessary before installation.

Safety Rules

FH-W2003 Slim Instructions 5

WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product

is designed for use only with the supplied parts and/or accessories designated for use with this

product by Modern Forms. Substitution of parts or accessories not designated for use with this

product by Modern Forms could result in personal injury or property damage and will void the

warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.

WARNING: To reduce the risk of electric shock, this fan must

be installed and operated with the supplied wall control, or controlled from the Modern Forms app

or Wi-Fi Touch Panel Wall Control (not included).

WARNING: Do not use power tools to assemble or install your fan. Using power tools can result in

improper assembly which can lead to noise or fan damage,personal injury or property damage.

WARNING: To reduce the risk of personal injury, do not bend the blade arms when installing the

brackets, balancing the blades or cleaning the fan.

WARNING: Do not insert foreign objects between rotating fan blades.

WARNING: Do not operate fan unless fan blades are in place. Noise and fan damage can occur

WARNING: This appliance is not intended for use by young children without supervision.

WARNING: To reduce the risk of ﬁre, electric shock, personal injury or damage to the fan or other

items, the outlet box and support structure must be securely mounted and capable of reliably

supporting a minimum of 35 Ibs (15.9 kg). Use only UL/cUL listed outlet boxes marked “FOR FAN

SUPPORT.” Use only the screws and washers provided with the outlet box.

CAUTION: Before assembling your fan, refer to the “Making the Electrical Connections“

section. If you feel you do not have enough wiring knowledge or experience, have your fan

installed by a licensed electrician.

NOTE: Before servicing or cleaning the fan, switch power oﬀ at the circuit breaker.

FH-W2003

Slim Instructions6

Get Smart...

Integrates

seamlessly with:

devices you already own

works with the

Google Assistant

Premium smart

features:

Accessories:

MOTOR

complement high quality materials

personalize your experience

Quiet, reliable, and up to 70%

PRUHHɝFLHQWWKDQ$&IDQV

:L)LDQG%OXHWRRWKHQDEOHG

IRUȵH[LEOHFRQWURO

%OXHWRRWK:DOO&RQWURO

'LPVOLJKWWR_212))

IDQVSHHGV_6ROGVHSDUDWHO\

F-WCBT-WT :KLWH

%OXHWRRWK5HPRWH&RQWURO

'LPVOLJKWWR_212))

IDQVSHHGV

F-RCBT-WT :KLWH

Wet Location-listed to the strictest

UL/cUL safety regulations. Finished

and rated for interior and exterior use

FH-W2003 Slim Instructions 7

Contents

Tools Required

1. Mounting Options 10

2. Installing the Mounting Bracket 12

3. Attaching the Fan Blade 12

4. Adding the Decorative Trim Ring 12

5. Hanging the Fan 14

6. Making the Electrical Connections 16

7. Installing the Optional Wall Control 18

8. Finishing the Installation 20

9. Installing Adapter Plate 20

10. Installing the Luminaire Module 22

11. Controlling the Fan 24

12. Reset 26

13. Breeze Mode 26

14. Application 26

15. Accessories 28

16. Troubleshooting 29-30

FH-W2003

Slim Instructions8

Package Contents

Before discarding packaging materials be certain all parts have been removed.

Place the parts from the hardware bag into a small container to keep them from being lost.

7. Luminaire Module

F3IN-120V-R1-30

8. PC Shade

RPL-F2003-GLA

9. Luminaire Cover

RPL-F2003-COVER-**

10. Receiver

F-R3-2003-052

11. Remote Control

F-RCBT-WT

• Safety Cable 6.5” x 19 x 2mm

Flat washer (1)

• Safety Cable

10 x 76mm

Pan head Phillips

wood screws (1)

• Safety Cable 3/16”

(5.2 x 8.4 x1mm)

Spring washer (1)

• Flywheel Screws 1/4” x 11mm

Phillips/Slotted pan head

screws (4)

Hardware Bag

RPL-FH2003-PARTS

1. Fan Blade

RPL-F2003-***-BD-**

2. Mounting Bracket

RPL-F2003-HGR-**

3. Adapter Plate

4. Motor Housing

5. Motor Assembly

6. Decorative Trim Ring

RPL-F2003-TRIM-**

** denotes ﬁnish code of fan *** denotes blade sweep of fan

• Blade Screws 3/16” x 12mm

Phillips washer head screws (10)

• Canopy Screws 3/16” x 15mm

Slotted pan head screws (4)

• Luminaire Module 5/32” x 25mm

Phillips truss head screws (4)

• #10x38mm Pan Head Phillip

Screws (2)

• Ø5*14*1mm Flat Washer (2)

• 3/16” Star Washer (2)

FH-W2003 Slim Instructions 9

IMPORTANT: Please make note

of the MAC ID on the

receiver and keep it in a

safe place.

Hanging Weight: OEV

MAC ID

FH-W2003

Slim Instructions10

1. Mounting Options

CAUTION: To prevent electrical shock, ensure electricity has been

turned oﬀ at the circuit breaker before beginning.

If there isn’t an existing UL/cUL listed outlet box, please refer to the

following instructions. Secure the outlet box directly to the building

structure. Use appropriate fasteners and building materials. The

outlet box and support structure must be able to fully support the

moving weight of the fan (at least 35 lbs/15.9 kg). Do not use plastic

outlet boxes. Use only UL/cUL listed outlet boxes marked

“FOR FAN SUPPORT.”

Secure the outlet box directly to the building structure.

Figures 1-1B are examples of diﬀerent ways to mount the

outlet box.

NOTE: To hang your fan where there is an existing ﬁxture but no

ceiling joist, you may need an installation hanger bar.

FH-W2003 Slim Instructions 11

1. Support Brace

2. Outlet Box

3. Joist

FH-W2003

Slim Instructions12

2. Installing the Mounting Bracket

Remember to disconnect the power at the circuit breaker.

1. (Fig. 2) Illustrates how to mount the mounting bracket.

2. Remove 1 set screw from mounting bracket and set aside

for use in Finishing the Installation.

3. Pass supply wires through mounting bracket and secure to

outlet box.

1. Place blade on motor and secure with the blade attachment,

screws and washers.

2. Insert blades in slots, aligning with motor assembly holes.

3. Secure blades with blade attachment screws & washers (Fig. 3).

1. Remove 3 screws from the top of the motor housing and

place the decorative trim ring on the body of fan housing

as shown (Fig. 1).

NOTE: It is recommended to place a soft cloth underneath

the trim ring so it doesn’t scratch the ﬁnish surface.

2. Reattach the motor housing by re-installing the 3 screws (Fig. 2).

3. Attaching the Fan Blade

4. Adding the Decorative Trim Ring

FH-W2003 Slim Instructions 13

44A

FH-W2003

Slim Instructions14

1. Remove 2 opposing screws and loosen the others.

2. Pass supply wires through mounting plate.

3. Lift motor assemby and hang it on the hook on the

mounting plate using one of the screw holes (Fig.5).

4. Secure the safety cable into the structure beams using the wood

screw, washer, and spring washer provided.

NOTE: Safety cable is required for all installations in Canada. Safety

cable is required for ceiling fan and light combinations over 35 lbs. in

both flush and downrod models in the United States.

5. Hanging the Fan

FH-W2003 Slim Instructions 15

FH-W2003

Slim Instructions16

6. Making the Electrical Connections

WARNING: Installation of this fan requires that a three-conductor

cable (including ground wire) which should run between ceiling and

wall outlet box.

WARNING: Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire nuts,

except for the ground wire.

Insert the receiver into the mounting bracket with the flat side of the

receiver facing the ceiling (Fig. 6).

Motor to Receiver & Receiver to house supply wires (Fig. 6A).

1. Connect the motor assembly ground wire, mounting bracket

ground wire and receiver ground wire to the ground wire in

outlet box.

WARNING: Failure to connect ground wires could result in

poor fan control functionality.

2. Connect the red wire from the fan to the red wire marked

“TO MOTOR” from the receiver.

3. Connect the grey wire from the fan to the grey wire marked

“TO MOTOR” from the receiver.

4. Connect the yellow wire from the fan to the yellow wire marked

“TO MOTOR” from the receiver.

5. Connect the white wire from the fan to the white wire marked

“FOR LIGHT” from the receiver.

6. Connect the blue wire from the fan to the blue wire marked

“FOR LIGHT” from the receiver.

7. Connect the black (hot) wire from the ceiling to the black wire

marked “AC in L” from the receiver.

8. Connect the white (neutral) wire from the ceiling to the white

wire marked “AC in N” from the receiver.

FH-W2003 Slim Instructions 17

Follow the steps above to connect the fan to your household wiring. Use the plastic wire nuts with your fan.

Secure the plastic wire nuts with electrical tape. Make sure there are no loose strands or connections.

1. Mounting Bracket

2. Receiver

Black(Hot)

can be RED from Switch leg

Black(Line in H)

RED(to Motor)

GREEN(Ground)

BLUE (to Light)

BLUE (for Light)

GREEN(GND Must Use)

GREEN(Hanger Assembly Ground)

RED(to Motor)

GREY(to Motor)

WHITE(Neutral)

WHITE(to Light)

WHITE(Neutral)

GREY(to Motor)

YELLOW(to Motor)

WHITE(Line in N)

YELLOW(to Motor)

Outlet

Box

Receiver

FH-W2003

Slim Instructions18

7. Installing the Optional Wall Control

NOTE: Wall Control not included. A bluetooth wall control accessory

can be purchased separately.

1. Connect the green wire marked “GROUND” from the wall

control to the copper wire from the wall outlet box that

feeds back to the circuit breaker – important for proper

fan function (Fig. 7).

2. Connect the black wire marked “LINE IN” from the wall control to

the black LINE VOLTAGE wire from the wall outlet box that feeds

back to the circuit breaker (Fig. 7).

3. Connect the red wire from the wall control to the black wire from

the wall outlet box that feeds up to the fan (Fig. 7).

4. Connect the white wire from the wall control to the white

(neutral) wire from the wall outlet box (Fig. 7).

5. Carefully tuck the wire connections inside the outlet box.

Secure the wall control with the two (2) wall control screws

provided (Fig. 7A).

6. Attach the wall mounting plate over the wall switch and secure

with the two (2) wall mounting plate screws provided (Fig. 7A).

7. Fasten the wall plate to the wall mounting plate (Fig. 7A).

Wall Switch WiresHouse Wires

(Hot In)

(Neutral)

(Ground)

(Hot out to Fan)Fan Switch leg

(Copper/Ground)

(Neutral)

(Hot)

From Breaker

* Home Wiring may vary

to Fan

FH-W2003 Slim Instructions 19

Multi-location wiring

1 2 3

1. Wall Outlet

2. Wall Control

3. Wall Mounting Plate

4. Mounting Plate Screws

5. Wall Plate

Individually pair each of the wall controls with the fan

receiver using the pairing instruction. See page 22.

Line/Hot

Red

Green (Green or Bare)

Wallcontroller 1 Wallcontroller 2 Wallcontroller 3

If Applicable

FAN

Neutral/White

Wall Control 1 Wall Control 2 Wall Control 3

FH-W2003

Slim Instructions20

8. Finishing the Installation

9. Installing Adapter Plate

1. Secure wire connectors with supplied wire ties (Fig. 8).

2. Install motor housing to mounting plate with the 2 removed screws and

tighten the others.

3. Install the trim ring as shown (Fig. 8A).

1. Remove 1 of 3 screws and loosen the others (do not remove).

2. Using the screw from the previous step,

install the adapter plate by sliding into key holes, tightening 2

previously loosened screws, and installing 1 previously removed

screw (Fig. 9).

3. Remove 3 screws from the outer perimieter of the adapter plate.

La page charge ...

Modern Forms FH-W2003 Slim Flush Mode d'emploi

Marque: Modern Forms

Modèle: FH-W2003 Slim Flush

Catégorie: Ventilateurs ménagers

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Modern Forms FH-W2003 Slim Flush Operating instructions

Modern Forms FH-W2003 Slim Flush Mode d'emploi

Modern Forms FH-W2003 Slim Flush Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents