dji RXD2 Mode d'emploi

Taper
Mode d'emploi
Ultra-Bright Remote Monitor
User Guide
Introduction
The Ultra-Bright Remote Monitor uses the DJITM O3 image transmission technology to establish a
wireless connection to the RONINTM 4D Video Transmitter mounted on the Ronin 4D. Users can
monitor the camera live view and control the camera via the monitor. The expansion plate is also
supported to expand input of DC and CAN and output of HDMI and SDI. Hand grips can be
mounted to the remote monitor cage on the monitor for remote control.
Diagram
1. Detachable Antennas
2. Ventilation Holes
3. 3.5mm Headphone Jack
4. microSD Card Slot
If a microSD card is mounted, the recorded files can be stored in the microSD card. The max
capacity is 512 GB.
5. HDMI Port
To output the live view to other display devices.
6. USB-C Port
Connect to the DJI Assistant 2 (Ronin Series) software using a USB-C cable to activate and
update the device and export data.
7. Power Indicator
The indicator will be solid on after powered on and it will be off when powered off.
8. Power Button
Press once to power on the device. Press and hold to power it off.
9. Battery Slot
To mount the battery for power supply.
10. Battery Release Button 1
11. Battery Release Button 2
12. Expansion Plate Port Cover
The expansion plate port under the cover is used to mount the remote monitor expansion
plate to expand input of DC and CAN and output of HDMI and SDI.
13. Cage
There are 1/4” screw holes, 1/8” screw holes, and hand grips ports on the cage to mount the
corresponding accessories.
Mounting and Removing the Battery
Activation
The monitor requires activation before using for the first time. Power on the monitor and
connect it to the computer. Launch DJI Assistant 2 (Ronin Series), click the corresponding icon of
the device and follow the instructions to activate the device.
Linking
Linking between the monitor and the Ronin 4D video transmitter is required before use. Make
sure that the video transmitter is mounted to the Ronin 4D before linking. The monitor has two
work mode: control mode and audience mode. The linking method varies depending on the work
mode.
Control Mode
1. Power on the monitor. Tap to enter System Settings and then Connection Settings. Tap
Device Pairing under Control Mode, set the monitor in use as RC A or RC B, and tap Connect to
enter linking status.
2. In Image Transmission Settings in the Ronin 4D ultra-bright main monitor, tap Pairing to enter
linking status.
3. The ultra-bright remote monitor will display connected status after linking is successful. The
corresponding device A or device B status on the Ronin 4D ultra-bright main monitor will display
connected.
Audience Mode
1. Enable Broadcast Mode in Image Transmission Settings in the Ronin 4D ultra-bright main
monitor.
2. Power on the ultra-bright remote monitor. Tap to enter System Settings and then
Connection Settings. Tap Audience Mode and the monitor will automatically search for the
devices nearby. Tap the device you want to monitor and its live view will be displayed. Tap the
corresponding buttons on the right of the live view to refresh display or switch between devices.
Touchscreen Interface
The interface varies for control mode and audience mode. The following description is the
interfece introduction for control mode. In audience mode, control related operations such as
shooting parameters adjustment, force mobile, and LUT switch cannot be performed.
1. Battery Level and External Power Voltage
2. Remote Control Devices
To display the connected remote control devices such as three-channel follow focus, hand
grips, and master wheels.
3. HDMI Input Devices
4. Video Downlink Signal Strength and Bitrate
5. Shooting Parameters*
Includes white balance, ND, angle of aperture/shutter speed (one of the two displayed by
following the setting in the Ronin 4D), aperture and EI. Tap to adjust the corresponding
parameter.
6. Screen Lock
7. System Settings
Connection Settings: Switch between control mode and audience mode and link devices.
General Settings: Set the screen brightness, whether to display the front sight, ratio and
transparency of the safety frame.
About, Help: View information such as the version and SN. Get support from video tutorials.
8. Audio Gain
9. Monitor Volume
Listen to the audio only if an audio receiving device is connected to the 3.5mm headphone
jack.
10. Record Button and Timecode
Tap the button to start or stop shooting. Only video recording is supported.
11. LUT
12. Playback
Tap to preview the pictures and videos stored in the Ronin 4D.
13. Exposure Aid/Focus Aid*
False Color: When enabled, the live view will be displayed in false color.
Waveform: When enabled, the bottom of the screen will display the waveform of the
exposure values.
Zebra: When enabled, the overexposed areas in the image will be displayed in zebra crossing.
Adjust the level proportion of the zebra display using the slider under the option.
Peaking: Enable the peaking display and set the display color of the color peak or the
acutance percentage of the acutance peak.
Depth Waveform: When enabled, the right of the screen will display the depth map of the
live view in its top view.
The settings mentioned above are same with the ones for the Ronin 4D ultra-bright main
monitor. Refer to the Ronin 4D User Manual for details.
14. Focus Ruler
15. Safety Frame
Users can set the ratio of the safety frame and the transparency of the area out of the
frame.
* To adjust the shooting parameters, start/stop shooting, configure exposure aid/focus aid, make
sure that remote control is enabled in the Ronin 4D ultra-bright main monitor.
Firmware Update
Update the monitor using the DJI Assistant 2 (Ronin Series) software.
1. Power on the device. Connect the device to the computer using a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the firmware version.
5. The firmware will be downloaded and updated automatically.
6. The device will restart automatically after the firmware update is complete.
Specifications
Model RXD2
Weight Remote monitor cage included: 768 g
Remote monitor cage excluded: 496 g
Dimensions Remote monitor cage included: 214×52×166 mm (L×W×H)
Remote monitor cage excluded: 184×26×158 mm (L×W×H)
Screen Resolution
1920×1200
Screen Brightness
>1000 cd/m
2
Video Transmission
System
O3 (OcuSync 3.0)
Live View Quality
1080p@60fps
Max
Communication
Bandwidth
40 MHz
Video Coding
Format
H.264
Max Bitrate
50 Mbps
Latency
68 ms (1080p@60fps), 100 ms (1080p@24fps)
Operating
Frequency**
2.4000-2.4835 GHz, 5.150-5.250 GHz, 5.250-5.350 GHz, 5.470-5.725
GHz, 5.725-5.85 GHz
Transmitter Power
(EIRP)
2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.1 GHz & 5.2 GHz & 5.5 GHz: <26 dBm (FCC), <23 dBm (CE/SRRC/MIC)
5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC)
Compatible Battery DJI WB37 Intelligent Battery
Operating
Temperature -10° to 40° C (14° to 104° F
** Local regulations in some countries prohibit the use of the 5.8 GHz and 5.2 GHz frequencies. In
some countries, the 5.2 GHz frequency band is only allowed for indoor use.
Compliance Information
FCC Compliance Notice
Suppliers Declaration of Conformity
Product name: DJI Ultra-Bright Remote Monitor
Model Number: RXD2
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model
was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA). These requirements set a SAR
limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly worn on the body.
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: (1)This device may not cause interference.(2)This device must accept
any interference, including interference that may cause undesired operation of the device.
Lémetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. Lexploitation est autorisée aux deux conditions suivantes :(1)Lappareil ne
doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment. End user must follow the specific operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.The portable device is designed to meet the requirements for exposure to
radio waves established by the ISED.
No operation is permitted for the frequency “5600-5650MHz”
Aucune opération n’est autorisée pour la fréquence « 5600-5650MHz »
The device for the band 5150-5350 MHz are only for indoor use.
Les appareils de la bande 5150-5350 mhz ne sont conçus que pour une utilisation en intérieur.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest
SAR value reported under this standard during product certification for use when properly worn
on the body.
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un
environnement non contrôlé. L’utilisateur final doit suivre les instructions spécifiques pour
satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction
avec toute autre antenne ou transmetteur. Le dispositif portatif est conçu pour répondre aux
exigences dexposition aux ondes radio établie par le développement énergétique DURABLE.
Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la
plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser lorsqu’il
est correctement porté sur le corps.
部件名称
有害物质
(Pb)
(Hg)
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
线路板 ×
外壳 ×
金属部件(铜
合金) ×
内部线材 ×
其他配件 ×
本表格依据SJ/T 11364 规定编制。
:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下
×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定
的限量要求。
(产品符合欧盟ROHS指令环保要求
5150-5350MHz,仅限室内使用
KCC Compliance Notice
해당무선설비는 운용 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는
없습니다.”
해당 무선설비는 운용 전파혼신 가능성이 있음
NCC Compliance Notice
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、
大功率或變更原設計之特性及功能低功率射頻器材之使用不得影響飛航安全及干擾合法通
信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,
指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
注意:
應避免影響附近雷達系統之操作。
高增益指向性天線只得應用於固定式點對點系統。
EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of the Directive
2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
GB Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of Radio Equipment
Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance
Declaración de cumplimiento UE: SZ DJI Osmo Technology Co., Ltd. por la presente declara que
este dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva
2014/53/EU.
Hay disponible online una copia de la Declaración de conformidad UE en
www.dji.com/euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
EU-verklaring van overeenstemming: SZ DJI Osmo Technology Co., Ltd. verklaart hierbij dat dit
apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn
2014/53/EU.
De EU-verklaring van overeenstemming is online beschikbaar op
www.dji.com/euro-compliance
Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE: A SZ DJI Osmo Technology Co., Ltd. declara, através deste
documento, que este dispositivo está em conformidade com os requisitos essenciais e outras
disposições relevantes da Diretiva 2014/53/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em
www.dji.com/euro-compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE: SZ DJI Osmo Technology Co., Ltd. dichiara che il presente
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva
2014/53/EU.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web
www.dji.com/euro-compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Déclaration de conformité UE : Par la présente, SZ DJI Osmo Technology Co., Ltd. déclare que cet
appareil est conforme aux principales exigences et autres clauses pertinentes de la directive
européenne 2014/53/EU.
Une copie de la déclaration de conformité UE est disponible sur le site
www.dji.com/euro-compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
PRÉCAUTIONS D'USAGE DE L'APPAREIL
N’utilisez pas l’appareil dans un hôpital, un avion ou un équipement automobile en raison des
radiofréquences qui peuvent produire des interférences
•Maintenez une distance minimale de 15 cm entre votre appareil et un stimulateur cardiaque
pour éviter toute interférence
Eloigner les équipements radioélectriques du ventre des femmes enceintes.
Eloigner les équipements radioélectriques du bas-ventre des adolescents.
Le débit d'absorption spécifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes
électromagnétiques de l'équipement concerné. Le DAS maximal autorisé est de 2 W/ kg pour la
tête et le tronc et de 4 W/ kg pour les membres.
La ou les valeurs du débit d'absorption spécifique des RXD2DAS tronc: 1.029 W/ kg
EU-Compliance: Hiermit erklärt SZ DJI Osmo Technology Co., Ltd., dass dieses Gerät den
wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie
2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-compliance
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Декларация за съответствие на ЕС: SZ DJI Osmo Technology Co., Ltd. декларира, че това
устройство отговаря на основните изисквания и другите приложими разпоредби на
Директива 2014/53/ЕС.
Копие от Декларацията за съответствие на ЕС ще намерите онлайн на адрес
www.dji.com/euro-compliance
Адрес за контакт за ЕС: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Германия
Prohlášení o shodě pro EU: Společnost SZ DJI Osmo Technology Co., Ltd. tímto prohlašuje, že
tohle zařízení vyhovuje základním požadavkům a dalším příslušným ustanovením směrnice
2014/53/EU.
Kopie prohlášení o shodě pro EU je k dispozici on-line na webu www.dji.com/euro-compliance
Kontaktní adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Německo
EU-overensstemmelseserklæring: SZ DJI Osmo Technology Co., Ltd. erklærer hermed, at denne
enhed er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i direktiv
2014/53/EU.
Der er en kopi af EU-overensstemmelseserklæringen tilgængelig online på
www.dji.com/euro-compliance
EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland
Δήλωση Συμμόρφωσης ΕΕ: Η SZ DJI Osmo Technology Co., Ltd. δια του παρόντος δηλώνει ότι η
συσκευή αυτή συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της
Οδηγίας 2014/53/EΕ.
Αντίγραφο της Δήλωσης Συμμόρφωσης ΕΕ διατίθεται ηλεκτρονικά στη διεύθυνση
www.dji.com/euro-compliance
Διεύθυνση επικοινωνίας στην ΕΕ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Γερμανία
ELi vastavuskinnitus esolevaga teatab SZ DJI Osmo Technology Co., Ltd., et see seade on
kooskõlas direktiivi 2014/53/EL oluliste nõuete ja muude asjakohaste sätetega.
ELi vastavusdeklaratsiooni koopia on kättesaadav veebis aadressil www.dji.com/euro-compliance
Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa
Pranešimas dėl atitikties ES reikalavimams Bendrovė „SZ DJI Osmo Technology Co., Ltd. tvirtina,
kad šis prietaisas atitinka pagrindinius 2014/53/ES direktyvos reikalavimus ir kitas susijusias
nuostatas.
ES atitikties deklaracijos kopiją galite rasti adresu www.dji.com/euro-compliance
ES kontaktinis adresas: „DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany (Vokietija)
ES atbilstības paziņojums: SZ DJI Osmo Technology Co., Ltd ar šo apliecina, ka šī ierīce atbilst
direktīvas 2014/53/ES pamatprasībām un pārējiem būtiskiem nosacījumiem.
ES atbilstības deklarācijas kopija pieejama tiešsaistē vietnē www.dji.com/euro-compliance
ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vācija
EU:n vaatimustenmukaisuusvakuutus: SZ DJI Osmo Technology Co., Ltd. ilmoittaa täten, että
tämä laite on direktiivin 2014/53/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien
ehtojen mukainen.
Kopio EU:n vaatimustenmukaisuusvakuutuksesta on saatavana verkossa osoitteessa
www.dji.com/euro-compliance
Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
RÁITEAS Comhlíonta an AE: Dearbhaíonn SZ DJI Osmo Technology Co., Ltd. leis seo go bhfuil an
gléas seo de réir na gceanglas riachtanach agus na bhforálacha ábhartha eile sa Treoir 2014/53/AE.
Tá coip de Dhearbhú Comhréireachta an AE ar fáil ar líne ag www.dji.com/euro-compliance
Seoladh teagmhála san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dikjarazzjoni ta’ Konformità tal-UE: SZ DJI Osmo Technology Co., Ltd. hawnhekk tiddikjara li dan
l-apparat huwa konformi mar-rekwiżiti essenzjali u ma’ dispożizzjonijiet relevanti oħra
tad-Direttiva 2014/53/UE.
Kopja tad-Dikjarazzjoni ta’ Konformità tal-UE hija disponibbli onlajn fis-sit
www.dji.com/euro-compliance
Indirizz ta’ kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-Ġermanja
Declarația UE de conformitate: Prin prezenta, SZ DJI Osmo Technology Co., Ltd. declară faptul
acest dispozitiv este conform cu cerințele esențiale și celelalte prevederi relevante ale Directivei
2014/53/UE.
Un exemplar al Declarației UE de conformitate este disponibil online, la adresa
www.dji.com/euro-compliance
Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania
Izjava EU o skladnosti: Družba SZ DJI Osmo Technology Co., Ltd. izjavlja, da ta naprava ustreza
osnovnim zahtevam in drugim ustreznim določbam Direktive 2014/53/EU.
Kopija izjave EU o skladnosti je na voljo na spletu na www.dji.com/euro-compliance
Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemčija
EU Izjava o sukladnosti: Tvrtka SZ DJI Osmo Technology Co. Ltd. izjavljuje da je ovaj uređaj
izrađen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU.
Kopija EU Izjave o sukladnosti dostupna je na mrežnoj stranici www.dji.com/euro-compliance
Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemačka
Vyhlásenie o zhode EÚ: SZ DJI Osmo Technology Co., Ltd. týmto vyhlasuje, že toto zariadenie je
v zhode so základnými požiadavkami a ďalšími relevantnými ustanoveniami smernice 2014/53/EÚ.
pia tohto Vyhlásenia o zhode EÚ je k dispozícii online na www.dji.com/euro-compliance
Kontaktná adresa v EÚ: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko
Deklaracja zgodności UE: Firma SZ DJI Osmo Technology Co., Ltd. niniejszym oświadcza, że
przedmiotowe urządzenie jest zgodne z zasadniczymi wymogami i innymi stosownymi
postanowieniami dyrektywy 2014/53/UE.
Kopię deklaracji zgodności UE można znaleźć w Internecie na stronie
www.dji.com/euro-compliance
Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy
EU megfelelőségi nyilatkozat: A DJI Osmo Technology Co., Ltd. ezúton megerősíti, hogy ez az
eszköz megfelel a 2014/53/EU Irányelv alapvető követelményeinek és más vonatkozó
rendelkezéseinek.
Az EU megfelelőségi nyilatkozat másolata elérhető a www.dji.com/euro-compliance oldalon
EU kapcsolati cím: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Németország
EU-försäkran om efterlevnad: SZ DJI Osmo Technology Co., Ltd. härmed förklarar att denna enhet
uppfyller de väsentliga kraven och andra relevanta bestämmelser i direktivet 2014/53/EU.
En kopia av EU-förkran om efterlevnad finns att tillgå online på adressen
www.dji.com/euro-compliance
Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland
Yfirlýsing um fylgni við reglur ESB: SZ DJI Osmo Technology Co., Ltd. lýsir hér með yfir þetta
tæki hlíti mikilvægum kröfum og öðrum viðeigandi ákvæðum tilskipunar 2014/53/ESB.
Nálgast má eintak af ESB-samræmisyfirlýsingunni á netinu áwww.dji.com/euro-compliance
Heimilisfang ESB-tengiliðar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
AB Uygunluk Beyanı: SZ DJI Osmo Technology Co., Ltd. bu belge ile bu cihazın temel gerekliliklere
ve 2014/53/EU sayılı Direktifin diğer ilgili hükümlerine uygun olduğunu beyan eder.
AB Uygunluk Beyanının bir kopyasına www.dji.com/euro-compliance adresinden çevrim içi olarak
ulaşılabilir
AB için iletişim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the
residual waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances is
responsible to bring the appliances to these collecting points or to similar collection
points. With this little personal effort, you contribute to recycle valuable raw
materials and the treatment of toxic substances.
Umweltfreundliche Entsorgung
Elektro-Altgeräte dürfen nicht mit gewöhnlichem Abfall entsorgt werden und müssen separat
entsorgt werden. Die Entsorgung an kommunalen Sammelstellen ist für Privatpersonen kostenlos.
Die Eigentümer der Altgeräte sind für den Transport zu den Sammelstellen verantwortlich. Durch
diesen geringen Aufwand können Sie zur Wiederverwertung von wertvollen Rohmaterialien
beitragen und dafür sorgen, dass umweltschädliche und giftige Substanzen ordnungsgemäß
unschädlich gemacht werden.
Tratamiento de residuos responsable con el medio ambiente
Los aparatos eléctricos viejos no pueden desecharse junto con los residuos orgánicos, sino que
deben ser desechados por separado. Existen puntos limpios donde los ciudadanos pueden dejar
estos aparatos gratis. El propietario de los aparatos viejos es responsable de llevarlos a estos
puntos limpios o similares puntos de recogida. Con este pequeño esfuerzo estás contribuyendo a
reciclar valiosas materias primas y al tratamiento de residuos tóxicos.
Mise au rebut écologique
Les appareils électriques usagés ne doivent pas être éliminés avec les déchets résiduels. Ils
doivent être éliminés séparément. La mise au rebut au point de collecte municipal par
l'intermédiaire de particuliers est gratuite. Il incombe au propriétaire des appareils usagés de les
apporter à ces points de collecte ou à des points de collecte similaires. Avec ce petit effort
personnel, vous contribuez au recyclage de matières premières précieuses et au traitement des
substances toxiques.
Smaltimento ecologico
I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, ma devono essere
smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti di raccolta
pubblici è gratis. È responsabilità del proprietario dei vecchi dispositivi portarli presso tali punti di
raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale contribuirete al
riciclo di materie prime preziose e al corretto trattamento di sostanze tossiche.
Milieuvriendelijk afvoeren
Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar
moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis voor
particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van de
apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever
je een bijdrage aan de recycling van waardevolle grondstoffen en de verwerking van giftige
stoffen.
Eliminação ecológica
Os aparelhos elétricos antigos não podem ser eliminados juntamente com os materiais residuais.
Têm de ser eliminados separadamente. A eliminação no ponto de recolha público através de
entidades particulares é gratuita. É da responsabilidade do proprietário de aparelhos antigos
levá-los a estes pontos de recolha ou a pontos de recolha semelhantes. Com este pequeno
esforço pessoal, contribui para a reciclagem de matérias-primas úteis e para o tratamento de
substâncias tóxicas.
Изхвърляне с оглед опазване на околната среда
Старите електрически уреди не трябва да се изхвърлят заедно с битовите отпадъци, а
отделно. Изхвърлянето в общинския пункт за събиране на отпадъци от частни лица е
безплатно. Собственикът на старите уреди е отговорен за пренасянето на уредите до тези
или до подобни събирателни пунктове. С това малко собствено усилие допринасяте за
рециклирането на ценни суровини и за обработката на токсични вещества.
Ekologicky šetrná likvidace
Stará elektrická zařízení nesmějí být likvidována spolu se zbytkovým odpadem, ale musí být
likvidována samostatně. Likvidace na komunálních sběrných místech prostřednictvím soukromých
osob je bezplatná. Vlastník starých zařízení odpovídá za to, že je donese do těchto sběrných míst
nebo na obdobná sběrná místa. Tímto můžete přispět k recyklaci hodnotných surovin a
zpracování toxických látek.
Miljøvenlig bortskaffelse
Gamle elektriske apparater må ikke bortskaffes sammen med restaffald, men skal bortskaffes
separat. Bortskaffelse på et fælles indsamlingssted er gratis for privatpersoner. Ejere af gamle
apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder eller til lignende
indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af værdifulde
varer og behandlingen af giftige stoffer.
Απόρριψη φιλική προς το περιβάλλον
Οι παλιές ηλεκτρικές συσκευές δεν πρέπει να απορρίπτονται μαζί με τα υπολειμματικά
απόβλητα, αλλά ξεχωριστά. Η απόρριψη στο δημοτικό σημείο συλλογής μέσω ιδιωτών γίνεται
χωρίς χρέωση. Ο κάτοχος παλιών συσκευών είναι υπεύθυνος για τη μεταφορά των συσκευών σε
αυτά ή παρόμοια σημεία συλλογής. Μέσω της ατομικής σας προσπάθειας, συμβάλλετε στην
ανακύκλωση πολύτιμων πρώτων υλών και την επεξεργασία των τοξικών ουσιών.
Keskkonnasäästlik kasutuselt kõrvaldamine
Vanu elektriseadmeid ei tohi ära visata koos olmejäätmetega, vaid tuleb koguda ja kasutuselt
kõrvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis on äraandmine
eraisikutele tasuta. Vanade seadmete sellistesse või sarnastesse kogumispunktidesse toimetamise
eest vastutavad seadmete omanikud. Selle väikese isikliku panusega aitate kaasa väärtusliku
toorme ringlussevõtule ja mürgiste ainete töötlemisele.
Utilizavimas nekenkiant aplinkai
Senų elektrinių prietaisų negalima išmesti kartu su buitinėmis atliekomis; juos būtina utilizuoti
atskirai. Tokių prietaiutilizavimas per komunalinius atliekų surinkimo punktus yra nemokamas.
Elektrinių prietaisų savininkai utilizuojamus prietaisus privalo priduoti į atitinkamus arba
analogiškus atliekų surinkimo punktus. Tokiu du, įdėdami nedaug pastangų, prisidėsite prie
vertingų medžiagų perdirbimo ir aplinkos apsaugojimo nuo toksinių medžiagų.
Videi draudzīga atkritumu likvidēšana
Vecas elektriskās ierīces nedrīkst likvidēt kopā ar pārējiem atkritumiem, bet tās jālikvidē atsevišķi.
Privātpersonām atkritumu likvidēšana komunālajā savākšanas punktā ir bez maksas. Veco ierīču
īpašnieks ir atbildīgs par ierīču nogādāšanu šajos savākšanas punktos vai līdzīgos savākšanas
punktos. Ar šīm nelielām personiskajām pūlēm jūs veicināt vērtīgu izejmateriālu pārstrādi un
toksisko vielu apstrādi.
Hävittäminen ympäristöystävällisesti
Vanhoja sähkölaitteita ei saa hävittää kaatopaikkajätteen mukana, vaan ne on hävitettä
erikseen. Kunnalliseen keräyspisteeseen vieminen on yksityishenkilölle ilmaista. Vanhojen
laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keräyspisteisiin tai vastaaviin. Tällä
vähäisellä henkilökohtaisella vaivalla edistät omalta osaltasi arvokkaiden raaka-aineiden
kierrätystä ja myrkyllisten aineiden käsittelyä.
Diúscairt neamhdhíobhálach don chomhshaol
Níor cheart seanghléasanna leictreacha a dhiúscairt leis an dramhaíl iarmharach, ach caithfear iad
a chur de láimh astu féin. Tá an diúscairt ag an ionad bailiúcháin pobail ag daoine príobháideacha
saor in aisce. Tá freagracht ar úinéir seanghléasanna na gléasanna a thabhairt chuig na hionaid
bhailiúcháin sin nó chuig ionaid bhailiúcháin den chineál céanna. Le hiarracht bheag phearsanta
mar sin, cuidíonn tú le hamhábhair luachmhara a athchúrsáil agus le substaintí tocsaineacha a
chóireáil
Rimi li jirrispetta l-ambjent
L-apparat elettriku qadim ma għandux jintrema flimkien ma’ skart residwu, iżda għandu jintrema
b’mod separat. Ir-rimi fil-post tal-ġbir komunali minn persuni privati huwa b’xejn. Is-sit ta’
apparat qadim huwa responsabbli biex iġib l-apparat fdawn il-postijiet tal-ġbir jew f’postijiet
tal-ġbir simili. B’dan l-isforz personali żgħir, inti tikkontribwixxi għar-riċiklaġġ ta’ materja prima
prezzjuża u għat-trattament ta’ sustanzi tossiċi.
Eliminarea ecologică
Aparatele electrice vechi nu trebuie aruncate odată cu deșeurile reziduale, ci trebuie eliminate
separat. Eliminarea în cadrul punctului de colectare local de către persoane fizice este gratuită.
Proprietarii de aparate vechi sunt responsabili pentru transportul acestora la respectivele puncte
de colectare sau la alte puncte de colectare similare. Prin acest efort personal nesemnificativ,
puteți contribui la reciclarea materiilor prime valoroase și la tratarea substanțelor toxice.
Okolju prijazno odlaganje
Starih električnih aparatov ne smete odvreči skupaj z ostanki odpadkov, temveč ločeno.
Odlaganje na komunalnem zbirnem mestu je za fizične osebe brezplačno. Lastnik starih naprav je
odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega truda
prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi.
Ekološko odlaganje
Stari električni uređaji ne smiju se odlagati zajedno s kućnim otpadom, već ih treba odlagati
odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je besplatno.
Vlasnik starih uređaja dužan je donijeti uređaje do tih sabirnih mjesta ili sličnih sabirnih mjesta.
Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i pravilnoj obradi
otrovnih tvari.
Ekologická likvidácia
Staré elektrospotrebiče sa nesmú likvidovať spolu so zvyškovým odpadom, ale musia sa
zlikvidovať samostatne. Likvidácia v komunálnom zbernom mieste prostredníctvom súkromných
osôb je bezplatná. Majiteľ starých spotrebičov je zodpovedza prinesenie spotrebičov na tieto
zberné miesta alebo na podobné zberné miesta. Týmto malým osobným úsilím prispievate
k recyklovaniu cenných surovín a spracovaniu toxických látok
Utylizacja przyjazna dla środowiska
Nie można usuwać starych urządzeń elektrycznych wraz z pozostałymi odpadami. Wymagają one
oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbiórki odpadów komunalnych
jest darmowa. Właściciel starych urządzeń jest odpowiedzialny za dostarczenie ich do takich lub
podobnych punktów zbiórki. Zadając sobie tak niewielki trud, przyczyniasz się do recyklingu
cennych surowców i odpowiedniego postępowania z substancjami toksycznymi.
Környezetbarát hulladékkezelés
A régi elektromos készülékeket nem szabad a nem szelektíven gyűjtött hulladékkal együtt kidobni,
hanem a hulladékkezelésüket elkülönítve kell végezni A közösségi gyűjtőpontokon a
magánszemélyek ingyenesen leadhatják ezeket. A régi készülékek tulajdonosai felelnek azért,
hogy e készülékeket ezekre a gyűjtőpontokra, vagy más gyűjtőpontokra elhozzák. Ezzel a kis
szelyes erőfeszítéssel Ön is hozzájárul az értékes nyersanyagok újrahasznosításához és a
rgező anyagok kezeléséhez.
Miljövänlig hantering av avfall
Gamla elektriska apparater får inte kasseras tillsammans med restavfallet utan måste kasseras
separat. Kassering på den lokala insamlingsplatsen för privatpersoner är gratis. Ägaren av gamla
apparater ansvarar för att ta apparaterna till dessa insamlingsplatser eller till liknande
insamlingsplatser. Med denna lilla personliga insats bidrar du till återvinning av värdefulla råvaror
och hantering av giftiga ämnen.
Umhverfisvæn förgun
Ekki má farga gömlum raftækjum með úrgangsleifum, heldur þarf að farga þeim sérstaklega.
Förgun á almennum söfnunarstöðum er ókeypis fyrir einstaklinga. Eigandi gamalla tækja ber
ábyrá koma með tækin á þessa söfnunarsti eða á svipaða söfnunarstaði. Með þessu litla
persónulega átaki stuðlar þú að endurvinnslu verðmætra hráefna og meðferð eitrurefna.
Çevre dostu bertaraf
Eski elektrikli cihazlar, diğer atıklarla birlikte bertaraf edilmemeli, ayrıca atılmalıdır. Özel kişiler
aracılığıyla genel toplama noktasına bertaraf işlemi ücretsiz olarak yapılmaktadır. Eski cihazların
sahibi, cihazları bu toplama noktalarına veya benzer toplama noktalarına getirmekten sorumludur.
Bu az miktardaki kişisel çabayla, değerli ham maddelerin geri dönüştürülmesine ve toksik
maddelerin işleme alınmasına katkıda bulunmuş olursunuz.
This device is restricted to indoor use when operating in the 5150-5250MHz frequency range in
all EU/EFTA member states and Turkey.
Im Frequenzbereich 5150 5250 MHz darf dieses Gerät in allen EU/EFTA-Mitgliedsstaaten und
der
Türkei nur innerhalb von Geuden verwendet werden.
Este dispositivo está limitado a su uso en interiores cuando esté funcionando en el rango de
frecuenciade 5150-5250 MHz en todos los estados miembros de la UE/AELC y Turquía.
Cet appareil est réservé à un usage en intérieur dans une plage de fréquence de 5 150 à 5 250
MHz
dans tous les pays membres de l'Union Européenne et de l'Association européenne de
libre-échange,ainsi qu'en Turquie.
Il presente dispositivo è limitato all'uso in ambienti interni se utilizzato nell'intervallo di frequenze
difunzionamento 5150-5250 MHz in tutti gli stati dell'UE/AELS e in Turchia.
Dit apparaat mag in landen van de EU/EFTA en Turkije alleen in binnenruimtes worden gebruikt
wanneer het frequentiebereik 5150-5250 MHz is ingesteld.
Este dispositivo está restrito para uso em áreas internas ao operar na faixa de frequência de
5150-5250MHz em todos os estados-membros da UE/EFTA e Turquia.
Использование данного устройства в частотном диапазоне 5150-5250 МГц
разрешается только впомещениях во всех странах, входящих в ЕС/ЕАСТ, а также в
Турции.
Thailand Warning message
  .
Mexico Warning message
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Brazil Warning message
Informações sobre Regulamentação.
Este equipamento está certificado e homologado pela ANATEL.
Para maiores informações, consulte o site da ANATEL: www.anatel.gov.br.
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar
interferência em sistemas devidamente autorizados.
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

dji RXD2 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues