Craftsman VERSASTACK CMST17510 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

INSTRUCTION MANUAL | MANUAL DE INSTRUCCIONES | GUIDE D’UTILISATION
Radio + Charger / Cargador / Chargeur
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE PREGUNTAS O COMENTARIOS, COMUNÍQUESE CON NOSOTROS.
SI VOUS AVEZ DES QUESTIONS OU DES COMMENTAIRES, VEUILLEZ COMMUNIQUER AVEC NOUS.
CMST17510
15432 6/2018
1-888-331-4569 WWW.CRAFTSMAN.COM
3
English INSTRUCTION MANUAL 4
Espanol MANUAL DE INSTRUCCIONES 28
Francais GUIDE D’UTILISATION 52
4
ENEN
CRAFTSMAN
®
VERSASTACK™ RADIO+CHARGER
The CRAFTSMAN
®
VERSASTACK™ RADIO + CHARGER includes a built-in FM radio, Bluetooth
®
support, 3.5mm AUX connector port to play audio/music from an external appliance, and an
intuitive application for remote controlling the system via a Bluetooth
®
- enabled smartphone
or tablet. The system includes charging capabilities for CRAFTSMAN
®
slide pack batteries.
The VERSASTACK™ RADIO + CHARGER will charge most CRAFTSMAN
®
Li-ion batteries.
Batteries sold separately.
KEY FEATURES
FM-radio with manual/auto scanning and memory preset of stations
Favorites – preset digital stations. 12 FM stations.
Bluetooth
®
connectivity.
3.5mm Auxiliary input jack for connecting external audio devices.
USB power/charging port (5V/2.1A).
Large Color LCD illuminated display.
Illuminated, soft-touch buttons.
Four mid-range speakers, a subwoofer and an assisted bass resonator for rich sound
performance.
Volume control and sound tone adjustment.
Heavy-duty design.
Compatible with the VERSASTACK™ storage system.
Water and dust resistant – IP54 tested.
iOS and Android™ mobile app for complete remote control of the appliance.
5
ENEN
TECHNICAL DATA
POWER SUPPLY UNIT (AC/DC POWER ADAPTOR)
Power input 120VAC 50-60 Hz (Class II)
Power output 24 VDC
Current output 2 A
Weight 0.66 lb. (0.3 kg)
APPLIANCE
Power input 24 VDC
Power output USB charge (5V/2.1A)
Networked standby mode
standby mode power consumption
< 3W
Time for switching on the automatic network
standby power management function
< 20 mins
IP rating IP54**
Weight 13.2 lb. (5.9 kg) not including battery pack
Stacking weight (gross) 132 lb. (60 kg)
BATTERY PACK CHARGER
Battery packs voltage 20 VDC
Battery type Lithium-ion 20V Max* Battery Packs.
Approx. charging time 90–300 min
Charge current 1.5A
AUDIO CHARACTERISTICS
Audio source Bluetooth
®
, FM Radio, 3.5mm Auxiliary
input jack
Sound SPL 100 dB @ 1 m
Sound power 40 W (class D)
Operation time 12 hours (approx.) for a fully-charged CRAFTSMAN
20V Max* 4.0Ah Lithium ion battery
BLUETOOTH
®
CHARACTERISTICS
Operating Frequency 2402–2480 MHz
Transmit 4dBm max
* 20V MAX battery, maximum initial battery voltage (measured without a workload) is 20 volts.
Nominal voltage is 18.
** Help protect from work-site dust, debris and light rain.
6
ENEN
The denitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury!
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY CRAFTSMAN
®
TOOL, CALL
TOLL FREE AT: 888-331-4569
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS,
DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Pay attention and follow all warnings.
4. Follow all instructions.
5. DO NOT use this appliance near water.
6. This appliance shall not be exposed to direct water and no objects lled with liquids, such as
bottles, shall be placed on the appliance.
7. Clean only with a dry cloth.
8. Do not block any ventilation openings.
9. To protect the appliance from water or dust, always close the compartment cover, and the rubber
cover of the DC power input port.
10. Use in accordance with the manufacturer’s instructions.
11. DO NOT place near any naked ame sources, such as lighted candles, heat sources such as
radiators, heat registers, stoves or other apparatus (including ampliers) that produce heat.
12. Protect the power cord from being walked on or pinched particularly at plug and receptacle.
13. Only use attachments/accessories specied by the manufacturer.
14. When a cart is used, use caution when moving the cart/appliance combination to avoid injury
from tip-over. Use only with a cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus.
DEFINITIONS: SAFETY GUIDELINES
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, re and/or serious injury.
WARNING: To reduce the risk of injury, read the instruction manual entirely.
NOTE: Product WARNING labels are located on the bottom of the appliance.
7
ENEN
15. The AC/DC power adaptor should only be used as the power source for the appliance and for
battery charging. To disconnect the appliance completely, the AC/DC power adaptor should be
disconnected from the outlet.
16. Unplug this appliance during lightning storms or when unused for long periods of time.
17. The AC/DC power adaptor should be easily accessible and not obstructed while in use.
18. Refer all servicing to qualied service personnel. Servicing is required when the appliance has
been damaged in any way, such as power-supply cord or plug is damaged, liquid or direct rain has
reached the connectors, the appliance has been exposed to extensive moisture, does not operate
normally, or has been dropped and does not operate.
19. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
20. Children should be supervised to ensure that they DO NOT play with the appliance.
21. Use only with specically designated CRAFTSMAN
®
battery packs (see Important Safety
Instructions for All Battery Packs below for CRAFTSMAN
®
-approved battery packs). Use of any
battery packs other than those approved by CRAFTSMAN may create a risk of injury and re.
22. WARNING: Radio may vibrate and move from
its place. Avoid placing on high shelves to
prevent fall.
23. For connection to supply not in the U.S.A.,
use an attachment plug adapter of the proper
conguration for the power outlet.
24. Additional Warnings symbols and Labels:
The lightning ash with arrow head within a triangle is intended to tell the user that parts
inside the product are a risk of electric shock to persons.
The double insulation symbol (a square within a square) indicates a Class II electrical
appliance and is intended to alert qualied service personnel to use only identical
replacement parts in this appliance.
25. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal
to another. Shorting the battery terminals together may cause burns or a re.
26. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
8
ENEN
LIST OF STANDARDS
The CRAFTSMAN
®
VERSASTACK™ RADIO + CHARGER complies with the following standards:
ANSI/UL60065
CAN/CSA-C22.2 No. 60065
ANSI/UL1310
CSA C22.2 No.223-M91
IC RSS210
ICES-003
UL 2595
FCC part 15 Certication
FCC ID: 2ANWFCMST17510
IC: 23237-CMST17510
FCC
1. This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing
two conditions:
(1). This device may not cause harmful interference, and
(2). This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
3. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: To reduce the risk of re or electric shock, DO NOT expose this appliance to
direct rain or moisture. Use only in dry locations.
WARNING: To prevent electric shock, match the wide blade of the adaptor plug to the wide slot
of the outlet and fully insert.
WARNING: Modications not expressly approved by the manufacturer could void the user
authority to operate the equipment under FCC Rules.
IC (RSS-210)
1. This device complies with Industry Canada License-exempt RSS-210.
Operation is subject to the following two conditions:
(1) this device may not cause interference.
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
2. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and max imum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
9
ENEN
LIST OF SYMBOLS
The labels on this appliance may include the following symbols:
V Volts
A Amperes
W Watts
h hours
Direct current
Hz hertz
min minutes
Class II Construction (double insulated)
ETL Testing Laboratories symbol
Safety alert symbol
Read all documentation
10
ENEN
BATTERIES AND CHARGERS
The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the
safety instructions below and then follow charging procedures outlined.
When ordering replacement battery packs, be sure to include the catalog number and voltage. The
VERSASTACK™ RADIO + CHARGER is to be used only with CRAFTSMAN 20V Max* Lithium ion
rechargeable battery packs. Use of any other battery packs or any non-rechargeable batteries may create
a risk of injury or re.
Your radio is a CRAFTSMAN
®
charger. Be sure to read all safety instructions before using your charger.
Recharge only with the VERSASTACK™ RADIO integrated charger, or equivalent. A charger that is suitable
for one type of battery pack may create a risk of  e when used with another battery pack.
READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR ALL BATTERY PACKS
WARNING: Read all safety warnings and all instructions for the battery pack, charger, and power
tool. Failure to follow the warnings and instructions may result in electric shock, re and/ or
serious injury.
Do not charge or use the battery pack in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Inserting or removing the battery pack
from the charger may ignite the dust or fumes.
NEVER force the battery pack into the charger. DO NOT modify the battery pack in any way to
t into a non-compatible charger as battery pack may rupture causing serious personal injury.
Charge the battery packs only in designated CRAFTSMAN
®
chargers.
DO NOT splash or immerse in water or other liquids.
Do not store or use the appliance and battery pack in locations where the temperature may
reach or exceed 104°F (40°C) (such as outside sheds or metal buildings in summer).For best life
store battery packs in a cool, dry location.
NOTE: Do not store the battery packs in a tool with the trigger switch locked on. Never tape the
trigger switch in the ON position.
The AC/DC adaptor shall not be exposed to dripping or splashing, and no objects lled with
liquids, such as vases, shall be placed on apparatus.
WARNING: Fire hazard. Never attempt to open the battery pack for any reason. If the battery
pack case is cracked or damaged, do not insert into the charger. Do not crush, drop or damage
the battery pack. Do not use a battery pack or charger that has received a sharp blow, been
dropped, run over or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on).
Damaged battery packs should be returned to the service center for recycling.
11
ENEN
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION)
Do not incinerate the battery pack even if it is severely damaged or is completely worn out.
The battery pack can explode in a re. Toxic fumes and materials are created when lithium ion
battery packs are burned.
If battery contents come into contact with the skin, immediately wash area with mild soap
and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until
irritation ceases. Additionally, seek medical attention. The battery electrolyte
is composed of a mixture of liquid organic carbonates and lithium salts.
Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms
persist, seek medical attention.
Do not expose a battery pack or appliance to re or excessive temperature. Exposure
to re or temperature above 265 °F (130 °C) may cause explosion.
WARNING: Burn hazard. Battery liquid may be ammable if exposed to spark or ame.
TRANSPORTATION
WARNING: Fire hazard. Do not store or carry the battery pack so that metal objects can contact
exposed battery terminals. For example, do not place the battery pack in aprons, pockets,
toolboxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
Transporting batteries can possibly cause res if the battery terminals inadvertently comes in
contact with conductive materials such as keys, coins, hand tools and the like. The US Department
of Transportation Hazardous Material Regulations (HMR) actually prohibits transporting batteries
in commerce or on airplanes (e.g., packed in suitcases and carry-on luggage) UNLESS they are
properly protected from short circuits. So, when transporting individual battery packs, make sure
that the battery terminals are protected and well insulated from materials that could contact them
and cause a short circuit.
12
ENEN
STORAGE RECOMMENDATIONS
1. The best storage place is one that is cool and dry, away from direct sunlight and excess
heat or cold.
2. For long-term storage, it is recommended to store a fully charged battery pack in a cool dry place
out of the charger for optimal results.
 NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will
need to be recharged before use.
THE RBRC
®
SEAL
The RBRC
®
(Rechargeable Battery Recycling Corporation) seal on the nickel cadmium, nickel metal
hydride or lithium ion batteries (or battery packs) indicate that the costs to recycle these batteries
(or battery packs) at the end of their useful life have already been paid by CRAFTSMAN
®
. In some
areas, it is illegal to place spent nickel cadmium, nickel metal hydride or lithium ion batteries in the
trash or municipal solid waste stream, and the RBRC program provides an environmentally conscious
alternative.
RBRC
®
, in cooperation with CRAFTSMAN
®
and other battery users, has established programs in the
United States and Canada to facilitate the collection of spent nickel cadmium, nickel metal hydride or
lithium ion batteries. Help protect our environment and conserve natural resources by returning the
spent nickel cadmium, nickel metal hydride or lithium ion batteries to an authorized CRAFTSMAN
®
service center or to your local retailer for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery.
RBRC
®
is a registered trademark of the Rechargeable Battery Recycling Corporation.
IMPORTANT SAFETY INSTRUCTIONS FOR ALL BATTERY CHARGERS
WARNING: Read all safety warnings and all instructions for the battery pack, charger and power
tool. Failure to follow the warnings and instructions may result in electric shock, fire and/ or
serious injury.
SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instructions for
battery chargers.
DO NOT attempt to charge the battery pack with any charger other than a compatible
CRAFTSMAN
®
charger.The charger and battery pack are specifically designed to work together.
This charger is not intended for any uses other than charging designated CRAFTSMAN
®
rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.
Do not expose the charger to direct water source and DO NOT immerse in water.
Pull by the plug rather than the cord when disconnecting the charger. This will reduce the risk of
damage to the electric plug and cord.
Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise
subjected to damage or stress.
Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord
could result in risk of fire, electric shock or electrocution.
When operating a charger outdoors, always provide a dry location and use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The
smaller the gauge number of the wire, the greater the capacity of the cable, that is, 16 gauge has more
capacity than 18 gauge. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating. When using more than one extension to make up the total length, be
sure each individual extension contains at least the minimum wire size. The following table shows the
correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gauge. The lower the gauge number, the heavier the cord.
13
ENEN
Volts Total Length of Card in Feet (meters)
120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)
240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
Ampere Rating
Amerian Wire Gauge
More
Than
Not
More
Than
0 6
18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
Minimum Gauge for Cord Sets
Do not place any object on top of the charger. Place the charger in a position away from any heat
source.
Do not operate the charger with a damaged cord or plug.
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged
in any way. Take it to an authorized service center.
Do not disassemble the charger; take it to an authorized service center when service or
repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk
of electric shock. Removing the battery pack will not reduce this risk.
Disconnect the battery pack from the appliance before making any adjustments, changing
accessories, or storing appliance.
NEVER attempt to connect 2 chargers together.
The charger is designed to operate on standard 120VAC household electric power.
Do not attempt to use it with any other voltage.
WARNING: Shock hazard. Do not allow any liquid to get inside the charger. Electric shock may
result.
WARNING: Burn hazard. Do not submerge the battery pack in any liquid or allow any liquid to enter
the battery pack. Never attempt to open the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks, return to a service center for recycling.
CAUTION: Burn hazard. To reduce the risk of injury, charge only CRAFTSMAN
®
rechargeable battery
packs. Other types of batteries may overheat and burst resulting in personal injury and property
damage.
NOTICE: When battery pack is not in use, keep it away from other metal objects. Alternatively, with
the charger plugged into the power supply, the charger can be shorted or ignited by foreign material.
Foreign materials or metal objects of a conductive nature, such as, but not limited to, grinding dust,
metal chips, steel wool, aluminum foil or any buildup of metallic particles should be kept away from the
charger cavities at all times.
Always unplug the AC/DC power adaptor from the outlet and remove the battery pack from the battery
pack receptacle before attempting to clean the charger.
14
ENEN
CHARGING
The VERSASTACK™ RADIO + CHARGER can only charge CRAFTSMAN
®
20V MAX* Lithium-ion
rechargeable battery packs, including CRAFTSMAN
®
Battery packs up to 4Ah. Use of any other battery
packs or any non-rechargeable batteries may create a risk of injury or fire. Be sure to read all safety
instructions before using this appliance for charging your battery pack.
 NOTE: To ensure maximum performance and life of lithium-ion battery packs, charge the battery
pack fully before first use.
IMPORTANT CHARGING NOTES
1. Longest life and best performance can be obtained if the battery pack is charged when room
temperature is between 65
o
F and 75
o
F (18-24
o
C). DO NOT charge the battery pack below 40
o
F
(4.5
o
C), or above 104
o
F (40
o
C). This is important and will prevent serious
damage to the battery pack.
Charging improperly or at temperatures outside of the specied range may damage the battery
and increase the risk of re.
2. The charger and battery pack may become warm to the touch while charging. This is a normal
condition and does not indicate a problem. To facilitate the cooling of the battery pack after use,
avoid placing the charger or battery pack in a warm environment such as in a metal shed or an
uninsulated trailer.
3. A cold battery pack will charge at about half the rate of a warm battery pack. The battery pack
will charge at that slower rate throughout the entire charging cycle and will not return to maximum
charge rate even if the battery pack warms.
If the battery pack does not charge properly:
a. Make sure power source is working by plugging a different appliance to the same source.
b. Check to see if receptacle is connected to a light switch which turns power off when you
turn out the lights.
c. Move the charger and battery pack to a location where the surrounding air temperature is
approximately 75–65F (24-18C).
d. If charging problems persist, take the battery pack and charger to your local service center.
4. The battery pack should be recharged when it fails to produce sufcient power on jobs which
were easily done previously. DO NOT CONTINUE to use the pack under these conditions. You
may also charge a partially used pack with no adverse effect on the battery pack.
5. Foreign materials of a conductive nature such as, but not limited to, grinding dust, metal chips,
steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger
cavities. Always unplug the charger from the power supply before attempting to clean.
6. Do not freeze or immerse the charger in water or any other liquid.
7. Do not use a battery pack or appliance that is damaged or modied. Damaged or modied
batteries may exhibit unpredictable behavior resulting in re, explosion or risk of injury.
WARNING: Shock hazard. Don’t allow any liquid to get inside the charger. Electric shock
may result.
WARNING: Burn hazard. Do not submerge the battery pack in any liquid or allow any liquid to
enter the battery pack. Never attempt to open the battery pack for any reason. If the plastic
housing of the battery pack breaks or cracks, return to a service center for recycling.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
15
ENEN
CHARGING A BATTERY PACK
The VERSASTACK™ RADIO + CHARGER includes a large storage compartment. This
compartment also stores and protects the AC/DC power adaptor when not in-use.
1. Open the compartment to take out the AC/DC power adaptor (see Figure 1 and Figure 3).
2. Plug the charger AC/DC power adaptor into an appropriate outlet and connect it to the
VERSASTACK™ RADIO + CHARGER power-in port before inserting the battery pack.
The main adaptor indicator LED will light in red.
3. Open the appliance cover by releasing its locking latch.
4. Insert the battery pack (not included) into the radio, making sure the pack is securely held in the
receptacle (Figure 3). The battery indicator LED will blink continuously, indicating that battery charging
is in process.
The main adaptor LED lights in red. The battery indicator LED will light in accordance with battery
charging status (Green, Yellow, Red).
NOTE: Close the cover and check it is tightly closed.
5. The charging completion will be indicated by a steady battery indicator LED. The pack is fully charged
and may be used at this time or left in the charger.
HOT/COLD PACK DELAY
When the charger detects a battery pack that is too hot or too cold, it automatically starts a Hot/Cold Pack
Delay, suspending charging until the battery pack has reached an appropriate temperature.
The charger then automatically switches to the pack charging mode. This feature ensures maximum battery
pack life.
ELECTRONIC PROTECTION SYSTEM
Li-Ion tools are designed with an Electronic Protection System that will protect the battery pack against
overloading, overheating or deep discharge. The tool will automatically turn off if the Electronic Protection
System engages. If this occurs, place the lithium-ion battery pack on the
charger until it is fully charged.
LED INDICATORS
Battery LED
A three-color LED indicates the battery pack status
Green Battery pack is fully charged
Yellow Battery pack is partially charged
Red Battery pack needs to be charged
Slow Blink & Mains
Adaptor LED is on
Battery is charging
Fast Red Blink Error / Faulty battery pack
Mains Adaptor LED
A red LED indicates battery Mains Adaptor
red Mains Adaptor Connected
16
ENEN
When the appliance is turned ON
When charging a battery pack, a large battery image is displayed in the center of the LCD screen showing
the battery pack charging status.
Green Battery icon will be displayed ONLY when the unit is fully charged
When the unit is powered by battery, the unit will display battery empty
icon for 3 seconds and then turn off automatically
Hot Delay
This charger has a hot delay feature: when the charger detects a battery
that is hot, the red icon is shown and it automatically starts a delay,
suspending charging until the battery has cooled, and the icon turns blue.
After the battery has cooled down, the charger automatically switches to
the pack charging mode. This feature ensures maximum battery life.
Faulty Battery Packs
This charger will not charge a faulty battery pack. The charger will indicate
faulty battery pack by displaying an X on the LCD battery image. If this
occurs, re-insert the battery pack into the charger. If the problem persists,
try a different battery pack to determine if the charger is working properly.
If the new pack charges correctly, then the original pack is defective and
should be returned to a service center or other collection site for recycling.
If the new battery pack elicits the same trouble indication as the original,
have the charger and the battery pack tested at an authorized service
center.
NOTE: This could also mean a problem with a charger.
WARNING: To reduce the risk of injury, turn the appliance off and disconnect it from the power outlet
when not in use and when making repairs. Do not attempt to disassemble the unit; take it to an
authorized service center when service or repair is required.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
17
ENEN
QUICK USER GUIDE
18
ENEN
APPLIANCE DESCRIPTION
Figure 1. Front View
1. Front speakers (2x)
2. Carrying handle
3. Control panel
4. LCD Display Screen
5. Stacking latches (2x)
6. Compartment latch
7. Compartment cover
1. Power-in port (24 VDC)
2. Rear speakers (2x)
To reach the battery pack receptacle, open the compartment top cover by releasing the cover locking
latch.
To close the compartment, push the cover down until it is locked in place.
NOTE: When correctly closed, the compartment helps protect its contents from dust, debris
and light rain..
Figure 2. Rear View
5
6
7
5
1
1
2
3
4
2
1
2
19
ENEN
1. USB power/charging
port
2. Auxiliary jack (3.5 mm)
3. AC/DC power adaptor
compartment
4. Compartment cover
5. Battery Pack
Receptacle
6. Storage space
1. Back button
2. Left button
3. Select dial
4. Right button
5. Home button
6. Touch buttons
7. LCD display screen
8. Battery LED
9. Main adaptor LED
10. Bluetooth
®
LED
Figure 4. Control Panel
Figure 3. Storage Compartment
6
7
8
9
1
2
3
4
5
10
1
2
3
4
5
6
20
ENEN
OPERATION
The VERSASTACK™ RADIO + CHARGER can be operated from the appliance itself or controlled
by a Bluetooth
®
-enabled mobile device (iOS or Android) using a dedicated application.
THE VERSASTACK™ RADIO + CHARGER UNIT
The VERSASTACK™ RADIO + CHARGER is equipped with flash memory for storing 12 FM radio stations,
and up to 6 paired Bluetooth
®
devices.
NOTE: The appliance will operate when connected to the AC/DC power adaptor and/or when a charged
battery pack is inserted.
NOTE: When the VERSASTACK™ RADIO + CHARGER is connected by the supplied power cord to a wall
outlet, it automatically charges the installed battery. When unplugged, the appliance will automatically switch
to operating off the battery and can run up to 8 hours on a fully charged 5Ah 20V MAX Lithium-ion battery.
Using batteries of lower voltage and amp hours will yield less run time.
This appliance can be operated in the vertical or horizontal position.
USER INTERFACE AND BUTTONS
The front panel includes an LCD screen with on-screen touch- buttons. Below the screen is a selection
dial button and four pushbuttons.
SELECTION DIAL AND PUSHBUTTONS
Selection Dial
(this button has multiple functions)
Back button
Left button
Right button
Home button
ON SCREEN DISPLAY
The LCD display, and the resistive touch-buttons on both sides, change function according to the mode
of operation. The various functions are explained in the mode sections below.
POWERING ON AND OFF
Press the Selection Dial to turn on the appliance. It starts up on the last selected audio source. Press
the Selection Dial for 3 seconds. The appliance turns off.
VOLUME ADJUSTMENT
WARNING: Excessive sound level can damage hearing.
NOTE: The volume is set and saved separately for each of the audio source types.
Turn the Selection Dial clockwise to increase the volume. Turn it counterclockwise to reduce volume. A
volume bar is displayed showing the volume level.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78

Craftsman VERSASTACK CMST17510 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à