Sony ICD-57 Le manuel du propriétaire

3-047-938-21 (1)

IC Recorder

Operating Instructions

Mode d’emploi

2000 Sony Corporation

ICD-37/57/67

GB

FR

2

GB

3

GB

Table of Contents

What is an IC recorder? ................................................................................ 4

Features .......................................................................................................... 5

Getting Started

Step 1: Installing the Battery ........................................................................ 6

Step 2: Setting the Clock............................................................................... 8

Basic Operations

Recording Messages ................................................................................... 10

Playing Back Messages............................................................................... 13

Erasing Messages ........................................................................................ 16

Advanced Operations

Moving Messages to a Different File — Move Function ....................... 18

Adjusting the Playback Speed .................................................................. 19

Adding a Recording to a Previously Recorded Message ...................... 20

Playing Back a Message at a Desired Time with an Alarm................... 21

Preventing Accidental Operation — HOLD function ........................... 25

Menu Settings

Turning off the Beep Sound ....................................................................... 26

Selecting the Microphone Sensitivity....................................................... 27

Playing Back All Messages in a File Continuously ................................ 28

Additional Information

Precautions................................................................................................... 29

Troubleshooting .......................................................................................... 30

Specifications ............................................................................................... 31

Index to Parts and Controls ....................................................................... 32

Menu map .................................................................................................... 34

Index ............................................................................................................. 36

Notes

• The illustrations in this manual are those of ICD-57.

• The display in the display window may be different from the illustrations in

the manual depending on the models or operating conditions.

GB

4

GB

What is an IC recorder?

This IC recorder enables you to record and play back oral messages in the

built-in IC memory.

z Recording

When a new message is recorded, it is automatically added after the last

recorded messages.

Unlike with tape recorders, you do not need to worry about recording over

previously recorded messages by mistake.

Since you do not need to search for the end of the last recording, you can

start recording quickly whenever you wish.

z Playback

With this IC recorder, you can quickly locate the message you want to play

back.

Reviewing the current recording is also very easy.

z Erasing

You can quickly erase unwanted messages with an easy operation. When a

message is erased, the next message automatically advances, leaving no

blank space.

Meet Mr. Brown at

2 p.m. tomorrow.

11:30, November 1

12:00, November 1

10:00, November 2

Don’t forget

to call Mary

Make remittance

at ABC bank

9:00, November 4

Send a card to

Miss Smith

Message 1 Message 2 Message 3

Message 4

Remaining messages

are renumbered.

Message 1 Message 2 Message 5

Message 4Message 1 Message 2 Message 3

Message 3

Message 4

After

Before

Erase Message 3

5

GB

Features

•45 minutes (ICD-37)/90 minutes (ICD-57)/180 minutes (ICD-67)

recording time

This unit is useful for recording messages or appointments.

•Organizing message files

You can choose among 3 different files to record and store your

messages.

You can easily move messages from one file to another (see page 18).

Up to 99 messages can be recorded in each file.

•Alarm function

You can start playing back a desired message with an alarm on a desired

date and time (see page 21). You can use this function to remind you of

the time of the meeting, etc.

•Playback speed control

You can play back messages rapidly (+50%) or slowly (–25%) (see page

19). This is useful when playing back a long recording. The sound pitch

will be automatically adjusted when you change the playback speed.

•Adding a recording to previously recorded message

You can add a recording to the message being played back to count as

one message (see page 20).

6

GB

1

2

Slide and lift the battery

compartment lid.

Insert one LR03 (size AAA)

alkaline battery with correct

polarity, and close the lid.

If the battery compartment

lid is accidentally detached,

attach it as illustrated.

Step 1: Installing the Battery

1

2

1

2

To take out the battery

Take out the battery by pushing

the # side of it as illustrated.

7

GB

Getting Started

Clock setting display appears when you insert battery for the first time, or

when you insert battery after the unit has been without battery for a

certain period of time. Please refer to Steps 2 to 4 in “Step 2: Setting the

Clock” on pages 8 and 9 to set the date and time.

Replacing the battery

“E“ appears on the display when the battery becomes weak and it flashes

when the battery is exhausted. Replace the battery with a new one.

Battery life*

With continuous use, approx. 5 hours recording/4.5 hours playback

* Using Sony alkaline battery LR03 (SG), playing back through the internal

speaker with VOL control at around 3

The battery life may shorten depending on the operation of the unit.

Notes

• Do not use manganese batteries for this unit.

• When you replace the battery, insert the new one within 3 minutes after you

removed the exhausted one. Otherwise, the display may show the clock

setting display or incorrect date and time when you reinsert the battery. In this

case, set the date and time again.

The recorded messages, however, will remain.

• Do not charge a dry battery.

• When you are not going to use the unit for a long time, remove the battery to

prevent damage from battery leakage and corrosion.

8

GB

Clock setting display appears when you insert battery for the first time, or

when you insert battery after the unit has been without battery for a

certain period of time. In this case, proceed from Step 2.

Display the clock setting display.

Set the date.

Step 2: Setting the Clock

1 Press MENU to enter

the menu mode.*

2 Press –. once to display

“SET DATE”.

3 Press NxPLAY/STOP.

The year digits will flash.

2 Press NxPLAY/STOP.

The month

digits will flash.

3 Set the month and day in

sequence, then press

NxPLAY/STOP.

The hour

digits will

flash.

1 Press –. or >+ to select the digits of the year.

1

2

* The “ALARM” display may

appear instead of the “BEEP”

display (see page 34).

9

GB

Getting Started

Set the time.

Exit from the menu mode.

Press MENU.

3

2 Press NxPLAY/STOP.

The minute digits will flash.

3 Set the minute.

4 Press NxPLAY/STOP at the

time signal.

The display will return to

“SET DATE”.

4

1 Press –. or >+ to select the digits of the hour.

10

GB

Recording Messages

You can record up to 99 messages in each file (A, B and C).

Since a newly recorded message is automatically added behind the last

recorded message, you can start recording quickly without searching for

the end of the last recording.

Select the file.

Start recording.

During recording, the OPR indicator lights up in red.

You do not need to keep pressing REC START/STOP while recording.

1

Press FILE repeatedly until

the desired file is

displayed.

Current file

1 Press REC START/STOP.

Current message

number

Remaining recording time

2 Speak to the built-in

microphone.

2

OPR indicator

Message 1 Message 2 Blank space

Newly recorded message

e.g.

11

GB

Basic Operations

Stop recording.

If you do not change the file after you stop recording, the next time you record

you will record in the same file.

To listen to the current recording

Press REC START/STOP to stop recording, then press NxPLAY/STOP.

To review the current recording instantly

Press NxPLAY/STOP during recording.

To stop recording

You can also stop recording by pressing STOP instead of REC START/

STOP.

To display the remaining recording time

During recording, the remaining recording time is displayed under

REMAIN.

To display it during stop, press STOP for more than one second.

3

STOP

Press REC START/STOP again.

The unit stops at the beginning

of the current recording.

Continued

12

GB

Recording Messages (continued)

1 Tips

• You can record for up to 45 minutes (ICD-37)/90 minutes (ICD-57)/

180 minutes (ICD-67).

• You can select the microphone sensitivity. See page 27.

Notes

• When the remaining time of recording reaches 1 minute, the remaining time

and “END” will flash one after the other in the display window. When the

memory is full, recording automatically stops and “FULL” will flash in the

display window with an alarm sound. To continue recording, first erase some

of the messages (see page 16).

• If you press REC START/STOP when the memory is full, “FULL” will flash

with an alarm sound. Erase some of the messages before you start recording

again (see page 16).

• If you press REC START/STOP after you have recorded 99 messages, “FULL”

will flash with an alarm sound. Select another file or erase some of the

messages (see page 16).

Note on recording

Noise may be recorded if an object, such as your finger, etc., accidentally rubs

or scratches the unit during recording.

13

GB

Basic Operations

Playing Back Messages

When playing back a previously recorded message, start from Step 1.

When playing back a message you have just finished recording, start from

Step 3.

Select the file.

Select the message number.

1

2

Press –. or >+ to

display the desired

message number.

Continued

Press FILE repeatedly

until the desired file is

displayed.

Current file

Selected message number

Total number of

messages in the

current file

for smaller

message

number

for larger

message

number

14

GB

Start playback.

During playback, the OPR indicator lights up in green.

After playing back one message, the unit stops at the beginning of the next

message.

When the last message on a file has been played back, the unit stops at the

beginning of the last message.

Adjust the volume.

Playing Back Messages (continued)

3

4

OPR indicator

Time of recording

Date of recording

Turn VOL.

Press NxPLAY/STOP.

15

GB

Basic Operations

Playing back a message repeatedly — Repeat

Play

During playback, press NxPLAY/STOP for more than one second.

“ “ will be displayed and the selected message will be played back

repeatedly until you stop playback by pressing STOP.

Playing the beginning of each message —

Scanning Play

During stop mode, press NxPLAY/STOP for more than one second.

“SCAN” will be displayed in the display window and the first 5 seconds of

each message in the selected file will be played back.

When you find the desired message, press NxPLAY/STOP. The message

will be played back until the end.

For private listening

Connect an earphone (not supplied) to the EAR jack.

The built-in speaker will be automatically disconnected.

To stop playback

To Do this

stop at the beginning of Press STOP.

the current message

stop at the current position Press NxPLAY/STOP.

(Playback Pause function) To resume playback from that point,

press NxPLAY/STOP again.

Other operations

To Do this

skip to the next message Press >+.

skip to the previous Press –..

message

search forward during Keep >+ pressed.

playback

search backward during Keep –. pressed.

playback

16

GB

Erasing Messages

You can erase the recorded messages one by one or all messages in a file at

a time.

Note that once a recording has been erased, you cannot retrieve it.

Erasing messages one by one

When a message is erased, the remaining messages will advance and

renumbered so that there will be no space between messages.

To cancel erasing

Press STOP before step 2.

To erase other messages

Repeat steps 1 and 2.

1 Press ERASE while playing back the message you

want to erase or press ERASE for more than 1

second during stop mode.

A beep will sound and the message number and

“ERASE” will flash while the first and last 5 seconds

of the message is played back 10 times.

2 Press ERASE while the message is being played

back.

The message is erased and the remaining messages

will be renumbered.

Erase Message 3

Message 1 Message 2 Message 3 Message 4

Before erasing

After erasing

Remaining messages are renumbered.

Message 1 Message 3 Message 4 Message 5Message 2

17

GB

Basic Operations

Erasing all messages in a file

e.g.

File A

File B

1 Press FILE to select

the file you want to

erase.

To cancel erasing

Press STOP before step 3.

3 Press ERASE.

Message 1

Message 2 Message 3

Blank space

Message 1 Message 2 Message 3

2 Press ERASE and STOP

at the same time for

more than 1 second.

The file, the message

number and “ALL

ERASE” will flash.

18

GB

BAdvanced Operations

Moving Messages to a Different File —

Move Function

You can move recorded messages to a different file.

e.g. To move the seventh message in the file A to the file C

1 Play back the message you want to

move.

2 Press FILE during playback to select the

file you want to move the message to.

The file and “MOVE” will flash and the first

and last 5 seconds of the message will be

played back 10 times.

3 Press NxPLAY/STOP.

To cancel moving the message(s)

Press STOP before Step 3.

FILE

NxPLAY/STOP

19

GB

Advanced Operations

NORMAL FASTSLOW

PLAY SPEED

PLAY SPEED selector

Notes

• The move function does not duplicate a message in another file. When you

move a message to another file, the one in the previous file will be deleted.

• If you do not press NxPLAY/STOP while the first and last 5 seconds of the

message are played back, the display will return to the REMAIN display. In

this case, start the procedure from the beginning.

Adjusting the Playback Speed

You can adjust the speed of the playback with the use of the PLAY SPEED

selector on the bottom.

To play back rapidly

Set PLAY SPEED to FAST.

“FAST” will flash three times in the display

window and the playback speed will

increase about 50%.

To play back slowly

Set PLAY SPEED to SLOW.

“SLOW” will flash three times in the display

window and the playback speed will

decrease about 25%.

To play messages with normal speed

Set PLAY SPEED to NORMAL.

20

GB

Adding a Recording to a Previously

Recorded Message

You can add a recording to the message being played back.

The added recording will be placed after the current message and counted

as a part of the message.

1 During playback, press REC

START/STOP for more than 1 second.

The OPR indicator lights in red and

“R-PLUS” flashes three times.

Speak into the built-in microphone.

The display will then change to the

remaining recording time.

2 Press REC START/STOP again to stop

the recording.

To stop recording

You can also stop recording by pressing STOP instead of REC START/

STOP.

STOP

REC

START/STOP

Built-in microphone

During playback

of Message 3

After adding

a recording

Message 3 Message 4

Meeting at 2 o’clock

on December 1.

at Conference

room A

Added recording

La page charge ...

Sony ICD-57 Le manuel du propriétaire

Ce manuel convient également à

Sony ICD-57 Le manuel du propriétaire

dans d''autres langues

Documents connexes