AEG FFB63806PM Manuel utilisateur

Marque: AEG

Modèle: FFB63806PM

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Ce manuel convient également à

USER

MANUAL

EN User Manual 2

Dishwasher

FR Notice d'utilisation 29

Lave-vaisselle

FFB63806PW

FFB63806PM

FFE63806PW

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 4

3. PRODUCT DESCRIPTION...................................................................................6

4. CONTROL PANEL................................................................................................7

5. PROGRAMMES....................................................................................................7

6. SETTINGS.......................................................................................................... 10

7. OPTIONS............................................................................................................14

8. BEFORE FIRST USE..........................................................................................15

9. DAILY USE......................................................................................................... 17

10. HINTS AND TIPS..............................................................................................19

11. CARE AND CLEANING.................................................................................... 21

12. TROUBLESHOOTING......................................................................................23

13. TECHNICAL INFORMATION............................................................................27

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

www.aeg.com2

responsible for any injuries or damage that are the result

of incorrect installation or usage. Always keep the

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

• Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

• Do not let children play with the appliance.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(MPa)

• Follow the maximum number of 13 place settings.

ENGLISH 3

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• Put the cutlery in the cutlery basket with the sharp

ends pointing down or put them in the cutlery drawer

in a horizontal position with the sharp edges down.

• Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• If the appliance has ventilation openings in the base,

they must not be covered e.g. by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use the appliance

where the temperature is less than

0 °C.

• Install the appliance in a safe and

suitable place that meets installation

requirements.

2.2 Electrical connection

WARNING!

Risk of fire and electric

shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need to

be replaced, this must be carried out

by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

www.aeg.com4

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance is fitted with a 13 A

mains plug. If it is necessary to

change the mains plug fuse, use only

a 13 A ASTA (BS 1362) fuse (UK and

Ireland only).

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes, pipes

not used for a long time, where repair

work has been carried out or new

devices fitted (water meters, etc.), let

the water flow until it is clean and

clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• The water inlet hose has a safety

valve and a sheath with an inner

mains cable.

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately close the water tap and

disconnect the mains plug from the

mains socket. Contact the Authorised

Service Centre to replace the water

inlet hose.

2.4 Use

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Dishwasher detergents are

dangerous. Follow the safety

instructions on the detergent

packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the programme is

complete. Some detergent may

remain on the dishes.

• Do not store items or apply pressure

on the open door of the appliance.

• The appliance can release hot steam

if you open the door while a

programme operates.

2.5 Internal lighting

WARNING!

Risk of injury.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

• To replace the internal lighting,

contact the Authorised Service

Centre.

2.6 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Please note that self-repair or non-

professional repair can have safety

consequences and might void the

guarantee.

• The following spare parts will be

available for 7 years after the model

has been discontinued: motor,

circulation and drain pump, heaters

and heating elements, including heat

pumps, piping and related equipment

including hoses, valves, filters and

aquastops, structural and interior

parts related to door assemblies,

printed circuit boards, electronic

displays, pressure switches,

thermostats and sensors, software

and firmware including reset software.

Please note that some of these spare

parts are only available to

professional repairers, and that not all

ENGLISH 5

spare parts are relevant for all

models.

• The following spare parts will be

available for 10 years after the model

has been discontinued: door hinge

and seals, other seals, spray arms,

drain filters, interior racks and plastic

peripherals such as baskets and lids.

2.7 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

3. PRODUCT DESCRIPTION

Worktop

Ceiling spray arm

Upper spray arm

Lower spray arm

Filters

Rating plate

Salt container

Air vent

Rinse aid dispenser

Detergent dispenser

Comfort Lift basket

Trigger handle

Lower basket handle

Upper basket

Cutlery drawer

www.aeg.com6

3.1 Beam-on-Floor

The Beam-on-Floor is a light that is

displayed on the floor below the

appliance door.

• When the programme starts, a red

light comes on and stays on for the

duration of the programme.

• When the programme is completed, a

green light comes on.

• When the appliance has a

malfunction, the red light flashes.

The Beam-on-Floor is off

when the appliance is

deactivated.

When AirDry is activated

during the drying phase, the

projection on the floor may

not be completely visible. To

see if the cycle has ended,

check the control panel.

4. CONTROL PANEL

On/off button

Display

Program button

Delay button

MyFavourite button

TimeSaver button

XtraDry button

ExtraHygiene button

Indicators

4.1 Indicators

Indicator Description

Salt indicator. It is on when the salt container needs refilling.

Rinse aid indicator. It is on when the rinse aid dispenser needs refilling.

5. PROGRAMMES

The numbering of the programmes in the

table (P1, P2, etc.) reflects their

sequence on the control panel.

The order of the programmes in the table

may not reflect their sequence on the

control panel.

ENGLISH 7

Programme Degree of soil

Type of load

Programme phases Options

• Normal soil

• Crockery and cut‐

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• ExtraHygiene

• XtraDry

• All

• Crockery, cutlery,

pots and pans

• Prewash

• Wash from 45 °C

to 70 °C

• Rinses

• Dry

• ExtraHygiene

• XtraDry

• Mixed soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 50 °C and

65 °C

• Rinses

• Dry

• TimeSaver

• XtraDry

• Heavy soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

• TimeSaver

• ExtraHygiene

• XtraDry

• Normal soil

• Crockery and cut‐

lery

• Wash 60 °C

• Rinses

• Dry

• ExtraHygiene

• XtraDry

• Light soil

• Crockery and cut‐

lery

• Wash 60 °C

• Rinses

• ExtraHygiene

• XtraDry

• Normal or light

soil

• Delicate crockery

and glassware

• Wash 45 °C

• Rinses

• Dry

• XtraDry

• Normal soil

• Crockery and cut‐

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• XtraDry

• All • Prewash

www.aeg.com8

Programme Degree of soil

Type of load

Programme phases Options

10)

• No load • Self-cleaning

This programme offers the most efficient use of water and energy consumption for crockery and cut‐

lery with normal soil. This is the standard programme for test institutes. This programme is used to as‐

sess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.

The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad‐

justs the temperature and the quantity of water, the energy consumption and the programme duration.

This programme is suitable for washing a load with mixed soil. Place items with heavy soil in the lower

basket and with normal soil in the upper basket. The pressure and temperature of the water in the lower

basket are higher than in the upper basket.

This programme is designed to wash heavily soiled items with high water pressure and at a high tem‐

perature.

This programme is suitable for washing a load with normal soil.

This programme is suitable for washing a load or a half load with fresh soil. It gives good washing re‐

sults in a short time.

This programme controls the temperature of the water to provide special care for delicate items, glass‐

ware in particular.

This is the most silent programme. The wash pump works at a very low speed to reduce the noise

generated by the appliance. Due to the low speed, the programme duration is long.

With this programme, you can quickly rinse off food remains from dishes and prevent odours forming

in the appliance. Do not use detergent with this programme.

10)

This programme is designed to clean the inside of the appliance effectively and efficiently. It removes

limescale and grease buildup. The programme should be run at least once every 2 months with a desca‐

ler or a cleaning product designed for dishwashers and without any load.

5.1 Consumption values

Programme

Water

(l)

Energy

(kWh)

Duration

(min)

/ 11

0.821

/ 0.835

235

/ 235

P2 8 - 15 0.7 - 1.7 46 - 170

P6 14 - 16 1.2 - 1.5 160 - 180

P3 12.5 - 14.5 1.4 - 1.7 170 - 190

P4 12.9 1.15 89

ENGLISH 9

Programme

Water

(l)

Energy

(kWh)

Duration

(min)

P5 10 0.9 30

P7 12 - 14 0.8 - 1.0 82 - 92

P8 12 - 13 1.1 - 1.3 230 - 250

P9 4 0.1 14

P0 10 0.86 60 - 70

The pressure and the temperature of the water, the variations of the mains supply, the options, the

quantity of dishes and the degree of soil can change the values.

The values for programmes other than ECO are indicative only.

In accordance with the 1016/2010 regulation.

In accordance with the 2019/2022 regulation.

5.2 Information for test

institutes

To receive the necessary information for

conducting performance tests (e.g.

according to EN60436 ), send an email

to:

[email protected]

In your request, please include the

product number code (PNC) found on

the rating plate.

For any other questions regarding your

dishwasher, please refer to the service

book provided with your appliance.

6. SETTINGS

6.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter user mode.

Settings available in the user mode:

• The level of water softener according

to the water hardness.

• Activation or deactivation of the rinse

aid empty notification.

• The level of rinse aid according to the

required dosage.

• Activation or deactivation of the

acoustic signal for the end of a

programme.

• Activation or deactivation of the

AirDry.

As the appliance stores the saved

settings, there is no need to configure

it before every cycle.

How to set the programme

selection mode

The appliance is in programme selection

mode when the display shows the

programme number P1.

After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

www.aeg.com10

Press and hold simultaneously and

until the appliance is in programme

selection mode.

How to enter user mode

Make sure the appliance is in

programme selection mode.

To enter user mode, press and hold

simultaneously and until the

indicators , , , and flash

and the display is blank.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l Clarke de‐

grees

Water softener lev‐

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

Factory setting.

Do not use salt at this level.

Regardless of the type of detergent

used, set the proper water hardness

level to keep the salt refill indicator

active.

Multi-tabs containing salt are

not effective enough to

soften hard water.

Regeneration process

For the correct water softener operation,

the resin of the softener device needs to

be regenerated regularly. This process is

automatic and is the part of the normal

dishwasher operation.

When the prescribed quantity of water

(see values in the table) has been used

since the previous regeneration process,

a new regeneration process will be

initiated between the final rinse and the

programme end.

ENGLISH 11

Water softener lev‐

Amount of water

(l)

1 250

2 100

3 62

4 47

5 25

6 17

7 10

8 5

9 3

10 3

In case of the high water softener setting,

it may occur also in the middle of the

programme, before the rinse (twice

during a programme). Regeneration

initiation has no impact on the cycle

duration, unless it occurs in the middle of

a programme or at the end of a

programme with a short drying phase. In

that cases, the regeneration prolongs the

total duration of a programme by

additional 5 minutes.

Subsequently, the rinsing of the water

softener that lasts 5 minutes may begin

in the same cycle or at the beginning of

the next programme. This activity

increases the total water consumption of

a programme by additional 4 litres and

the total energy consumption of a

programme by additional 2 Wh. The

rinsing of the softener ends with a

complete drain.

Each performed softener rinse (possible

more than one in the same cycle) may

prolong the programme duration by

another 5 minutes when it occurs at any

point at the beginning or in the middle of

a programme.

All the consumption values

mentioned in this section are

determined in accordance

with the currently applicable

standard in laboratory

conditions with water

hardness 2.5mmol/L

according to the 2019/2022

regulation (water softener:

level 3).

The pressure and the

temperature of water as well

as the variations of the

mains supply can change

the values.

How to set the water softener

level

Make sure the appliance is un user

mode.

1. Press .

• The indicators , , and

are off.

• The indicator still flashes.

• The display shows the current

setting: e.g.

= level 5.

2. Press repeatedly to change the

setting.

3. Press the on/off button to confirm the

setting.

6.3 The rinse aid empty

notification

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase.

When the rinse aid chamber is empty,

the rinse aid indicator is turned on

notifying to refill rinse aid. If the drying

results are satisfactory while using multi-

tablets only, it is possible to deactivate

the notification for refilling rinse aid.

However, for best drying performance,

always use rinse aid.

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

www.aeg.com12

How to deactivate the rinse

aid empty notification

Make sure the appliance is in user mode.

1. Press

• The indicators , , and

are off.

• The indicator

still flashes.

• The display shows the current

setting.

– = the rinse aid empty

notification is deactivated.

–

= the rinse aid empty

notification is activated.

2. Press

to change the setting.

3. Press on/off to confirm the setting.

6.4 The rinse aid level

It is possible to set the released quantity

of rinse aid between level 1 (minimum

quantity) and level 6 (maximum quantity).

Level 0 deactivates the rinse aid

dispenser and no rinse aid is released.

Factory setting: level 4.

How to set the rinse aid level

Make sure the appliance is in user mode.

1. Press .

• The indicators

, , and

are off.

• The indicator

still flashes.

• The display shows the current

setting: e.g. = level 4.

– The levels of rinse aid range

from 0A to 6A where 0A

means no rinse aid is used.

2. Press repeatedly to change the

setting.

3. Press on/off to confirm the setting.

6.5 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic signal

is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

Make sure the appliance is in user mode.

1. Press .

• The indicators

, , and

are off.

• The indicator still flashes.

• The display shows the current

setting.

– = the acoustic signal is

deactivated.

– = the acoustic signal is

activated.

2. Press to change the setting.

3. Press on/off to confirm the setting.

6.6 AirDry

AirDry improves the drying results with

less energy consumption. The appliance

door opens automatically during the

drying phase and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

If, afterwards, the door is

closed for at least 3 minutes,

the running programme

ends.

ENGLISH 13

AirDry is automatically activated with all

programmes excluding (if

applicable).

The duration of the drying phase and the

door opening time vary depending on the

selected programme and options.

When AirDry opens the door, the display

shows the remaining time of the running

programme.

To improve the drying performance, refer

to the XtraDry option or activate AirDry.

CAUTION!

If children have access to

the appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press .

• The indicators , , and

are off.

• The indicator still flashes.

• The display shows the current

setting.

– = AirDry is deactivated.

–

= AirDry is activated.

2. Press to change the setting.

3. Press on/off to confirm the setting.

6.7 MyFavourite

This option allows to set and save the

most frequently used programme.

It is possible to save only 1 programme.

A new setting cancels the previous one.

How to save the MyFavourite

programme

1. Set the chosen programme.

It is also possible to set applicable

options together with the programme.

2. Press and hold

until the related

indicator is on.

How to set the MyFavourite

programme

Press .

• The MyFavourite indicator is on.

• The display shows the number

and the duration of the

programme.

• If options are saved together with

the programme, the indicators

related to the options are on.

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you select non compatible

options, the appliance

automatically deactivates

one or more of them. Only

the indicators of the still

active options are on.

If an option is not applicable

to a programme, the related

indicator is off or it flashes

quickly for a few seconds

and then goes out.

Activating options can affect

the water and energy

consumption as well as the

programme duration.

7.1 XtraDry

Activate this option to boost the drying

performance.

XtraDry is a permanent option for all

programmes other than . It is

automatically activated in next cycles.

www.aeg.com14

This configuration can be changed at any

time.

Every time is

activated, XtraDry is off and

needs to be chosen

manually.

Activating XtraDry deactivates

TimeSaver and vice versa.

How to activate XtraDry

Press .

The related indicator is on.

The display shows the updated

programme duration.

7.2 TimeSaver

The TimeSaver allows to reduce the

duration of a selected programme by

approximately 50%.

The washing results are the same as

with the normal programme duration. The

drying results can decrease.

This option increases the pressure and

the temperature of the water. The

washing and the drying phases are

shorter.

By default, TimeSaver is off, but it is

possible to activate it manually. This

option cannot be combined with XtraDry.

How to activate TimeSaver

Press .

The related indicator is on.

The display shows the updated

programme duration.

7.3 ExtraHygiene

This option provides better hygiene

results by keeping the temperature at

70 °C for at least 10 minutes during the

last rinsing phase.

How to activate ExtraHygiene

Press .

The related indicator is on.

The display shows the updated

programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not put dishes in

the baskets.

After starting the programme, the

appliance recharges the resin in the

water softener for up to 5 minutes. The

washing phase starts only after this

procedure is complete. The procedure is

repeated periodically.

8.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

Make sure that the Comfort

Lift basket is empty and

locked in the raised position.

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with dishwasher

salt (until it is full).

ENGLISH 15

4. Carefully shake the funnel by its

handle to get the last granules inside.

5. Remove the salt around the opening

of the salt container.

6. Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out

of the salt container when

you fill it. After you fill the

salt container, immediately

start the shortest programme

to prevent corrosion. Do not

put dishes in the baskets.

8.2 How to fill the rinse aid

dispenser

CAUTION!

The compartment (B) is for

rinse aid only. Do not fill it

with detergent.

CAUTION!

Only use rinse aid designed

specifically for dishwashers.

1. Open the lid (C).

2. Fill the dispenser (B) until the rinse

aid reaches the marking ''MAX''.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent excessive

foam formation.

4. Close the lid. Make sure that the lid

locks into position.

Fill the rinse aid dispenser

when the indicator (A) is

clear.

www.aeg.com16

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start a programme suitable

for the type of load and the degree of

soil.

9.1 Comfort Lift

CAUTION!

Do not sit on the rack or put

excessive pressure on the

locked basket.

CAUTION!

Do not exceed the max load

capacity of 18 kg.

CAUTION!

Make sure that items do not

stick out of the basket frame

as it can cause damage to

the items and the Comfort

Lift mechanism.

The Comfort Lift mechanism allows to lift

the lower rack up (to the second rack

level) and put it down to load and unload

dishes easily.

To load or unload the lower basket:

1. Lift the basket by pulling the rack out

of the dishwasher by the basket

handle. The trigger handle should not

be used.

The basket is automatically locked on the

upper level.

2. Carefully place items in the basket or

remove them (refer to Basket

loading leaflet).

3. Lower the basket by connecting the

trigger handle with the basket frame

as shown below. Lift the trigger

handle completely and the basket

handle slightly until the basket is

disengaged on both sides.

Once the basket is unlocked, push

the rack down. The mechanism

returns to its default position on the

lower level.

There are two ways of lowering the

basket depending on the loading:

• If there is a full load of plates,

slightly push the basket down.

• If the basket is empty or half-

loaded, press the basket down.

9.2 Using the detergent

CAUTION!

Only use detergent

specifically designed for

dishwashers.

ENGLISH 17

1. Press the release button (A) to open

the lid (C).

2. Put the detergent (gel, powder or

tablets) in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

For information about the

detergent dosage, refer to

the manufacturer's

instructions on the

packaging of the product.

Usually, 20 - 25 ml of gel

detergent is adequate for

washing a load with normal

soil.

The upper ends of the two

vertical ribs inside the

compartment (B) indicate

the maximum level for filling

the dispenser with gel (max.

30ml).

9.3 Setting and starting a

programme

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press repeatedly until the display

shows the number of the chosen

programme. The display shows the

programme number for

approximately 3 seconds and then

shows the programme duration.

• To select the MyFavourite

programme, press

• The indicators of the options

related to the MyFavourite

programme are on.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with

delay start

1. Set a programme.

2. Press

repeatedly until the display

shows the desired delay time (from 1

to 24 hours).

The indicator is on.

3. Close the appliance door to start the

countdown.

During the countdown, it is possible to

increase the delay time but not to change

the programme and options.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry function.

Cancelling the delay start

while the countdown

operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold simultaneously and

until the appliance is in programme

selection mode.

Cancelling the programme

Press and hold simultaneously and

until the appliance is in programme

selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

www.aeg.com18

End of the programme

When the programme is complete, the

display shows 0:00.

All buttons are inactive except for the

on/off button.

1. Press the on/off button or wait for the

Auto Off function to automatically

deactivate the appliance.

If you open or close the door before

the activation of Auto Off, the

appliance is automatically

deactivated.

2. Close the water tap.

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the programme is

complete.

• After 5 minutes if a programme was

not started.

10. HINTS AND TIPS

10.1 General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to protect the environment.

• Washing dishes in the dishwasher as

instructed in the user manual usually

consumes less water and energy than

washing dishes by hand.

• Load the dishwasher to its full

capacity to save water and energy.

For best cleaning results, arrange

items in the baskets as instructed in

the user manual and do not overload

the baskets.

• Do not pre-rinse dishes by hand. It

increases the water and energy

consumption. When needed, select a

programme with a prewash phase.

• Remove larger residues of food from

the dishes and empty cups and

glasses before putting them inside the

appliance.

• Soak or slightly scour cookware with

firmly cooked-on or baked-on food

before washing it in the appliance.

• Make sure that items in the baskets

do not touch or cover each other.

Only then can the water completely

reach and wash the dishes.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''All in

1''). Follow the instructions on the

packaging.

• Select a programme according to the

type of load and the degree of soil.

offers the most efficient use of

water and energy consumption.

• To prevent limescale buildup inside

the appliance:

– Refill the salt container whenever

necessary.

– Use the recommended dosage of

the detergent and rinse aid.

– Make sure that the current level of

the water softener agrees with the

hardness of the water supply.

– Follow the instructions in the

chapter "Care and cleaning".

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

designed for dishwasher. Other

products can cause damage to the

appliance.

• In areas with hard and very hard

water, we recommend to use basic

dishwasher detergent (powder, gel,

tablets containing no additional

agents), rinse aid and salt separately

for optimal cleaning and drying

results.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use tablets

with long programmes.

• Always use the correct quantity of

detergent. Insufficient dosage of

detergent can result in poor cleaning

results and hard-water filming or

spotting on the items. Using too much

detergent with soft or softened water

ENGLISH 19

results in detergent residues on the

dishes. Adjust the amount of

detergent based on the water

hardness. Refer to the instructions on

the detergent packaging.

• Always use the correct quantity of

rinse aid. Insufficient dosage of rinse

aid decreases the drying results.

Using too much rinse aid results in

bluish layers on the items.

• Make sure that the water softener

level is correct. If the level is too high,

the increased quantity of salt in the

water might result in rust on cutlery.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid, complete

the following steps:

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do put dishes in the baskets.

4. When the programme is complete,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

6. Activate the rinse aid empty

notification.

10.4 Loading the baskets

• Always use the whole space of the

baskets.

• Use the appliance to wash

dishwasher-safe items only.

• Do not wash in the appliance items

made of wood, horn, aluminium,

pewter and copper as they could

crack, warp, get discoloured or pitted.

• Do not wash in the appliance items

that can absorb water (sponges,

household cloths).

• Put hollow items (cups, glasses and

pans) with the opening facing

downwards.

• Make sure that glasses do not touch

each other.

• Put light items in the upper basket.

Make sure that the items do not move

freely.

• Put cutlery and small items in the

cutlery drawer.

• Make sure that the spray arms can

move freely before you start a

programme.

10.5 Before starting a

programme

Before you start the selected

programme, make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid

(unless you use multi-tablets).

• The arrangement of the items in the

baskets is correct.

• The programme is suitable to the type

of load and the degree of soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

After the programme is

completed, water can still

remain on the inside

surfaces of the appliance.

www.aeg.com20

La page charge ...

AEG FFB63806PM Manuel utilisateur

Marque: AEG

Modèle: FFB63806PM

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: AEG FFB63806PM User manual

AEG FFB63806PM Manuel utilisateur

Ce manuel convient également à

AEG FFB63806PM Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents