SIMPLE MANUAL
Wireless
Sound Bar
ENGLISH
Please read this manual carefully before operating your set and retain it for future
reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
SJ4R
MODEL
MFL70205120
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
www.lg.com
SJ4R.DCANLLK_ENG_SIM_5120.indd 1 2017-12-19 9:49:02
Front Panel
··································Standby / On
·······························Selects Function
·························Adjusts Volume
Subwoofer Connection1
Rear Panel
DC IN ···················Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
PORTABLE IN ········ Connect to a Portable device
USB
·················· Connect to a USB device
HDMI OUT (TV ARC)·············· Connect to a TV
HDMI IN ········· Connect to HDMI out on a device
The buttons are located on the rear. Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of wireless
subwoofer and sound bar to the outlet.
b Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to con-
nect manually.
a Press Pairing button on the rear of the wireless
subwoofer.
y
The green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the main unit.
c Pairing is completed.
y
The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
>1m
> 1 m
SJ4R.DCANLLK_ENG_SIM_5120.indd 2 2017-12-19 9:49:03
ASC/BASS BLAST/CINEMA: Selects the sound effect.
REAR LEVEL +/-: Adjusts the volume level of rear
speakers. (For rear speakers)
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Remote control
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
TV
TV Connection 2
Optical Connection
HDMI(ARC) Connection
a Connect the sound bar to the TV using
HDMI cable.
b Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
Connect with the Sound Bar and TV using
Optical (
) or HDMI ARC ( ).
Additional Device Connection
a Connect to the external device as follows.
TV
OR
(Set-top Box,
Player etc.)
b Set the input source by pressing F on the remote
control or unit repeatedly.
OR
y
HDMI connection is unavailable if your TV
does not support HDMI ARC.
y
If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
SJ4R.DCANLLK_ENG_SIM_5120.indd 3 2017-12-19 9:49:03
Specifi ation
Power
consumption
Refer to the main label.
AC adapter
y
Model :
DA-38A25
y
Manufacturer : Asian Power
Devices Inc.
y
Input :
100 - 240 V ~ 50 - 60 Hz
1.2 A
y
Output : 25 V
0
1.52 A
Dimensions
(W x H x D)
Approx.
890 mm x 55 mm x 85 mm
(35 inches x 2.17 inches x 3.35
inches)
With foot
Bus Power
Supply (USB)
5 V 0 500 mA
Amplifie
(Total RMS
Output power)
420 W RMS
Design and specifi ations are subject to change without
notice.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and
handling) upon email request to opensour[email protected]om.
This offer is valid for a period of three years after our last
shipment of this product. This offer is valid to anyone in
receipt of this information.
Additional Information
SJ4R.DCANLLK_ENG_SIM_5120.indd 4 2017-12-19 9:49:03
Rear Surround sound
Wireless Rear Speakers Kit included for real
surround sound.(SPJ4-S)
Industry Canada Statement
This device complies with Industry Canada’s applicable
licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
(i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii) for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band
5725-5850 MHz shall be such that the equipment
still complies with the e.i.r.p. limits specified for
point-to-point and non-point-to-point operation as
appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(devices operating in the band 5250-5350 MHz
with a maximum e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
SJ4R.DCANLLK_ENG_SIM_5120.indd 5 2017-12-19 9:49:03
SJ4R.DCANLLK_ENG_SIM_5120.indd 6 2017-12-19 9:49:04
SJ4R.DCANLLK_ENG_SIM_5120.indd 7 2017-12-19 9:49:04
LG Customer Information Center
1 888 542-2623 CANADA
Register your product Online!
www.lg.com
SJ4R.DCANLLK_ENG_SIM_5120.indd 8 2017-12-19 9:49:04
MODEL
SPJ4-S
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
Wireless
Rear Speakers
Kit
SIMPLE MANUAL
ENGLISH
a Connect the power cord of wireless receiver to
the outlet.
b Turn on the unit: The unit and wireless receiver
will be automatically connected. The receiver's
yellow - green LED turns on.
Wireless Receiver Connection Manually
If the rear speakers do not make sound, try to
connect manually.
a Press PAIRING button on the rear of the
wireless receiver.
y
The yellow - green LED on the wireless receiver
blinks quickly.
b Turn on the main unit.
c Pairing is completed.
y
The yellow - green LED on the wireless receiver
turns on.
Rear Speakers Connection1 Wireless Receiver Connection2
a Connect the speaker cables to rear speakers
correctly.
b Connect the Wireless Receiver and the rear
speakers (Grey: right, Blue: left) with the speaker
cables.
c Turn on the Surrond function to enjoy surround
sound.
Speaker design and connection method may be
different according to models.
Rear speaker
(Left)
Wireless
Receiver
Rear speaker
(Right)
Transparent
Black stripe
Transparent
Black stripe
Additional Information
Specication of Wireless reciever
Power
requirement
Refer to the main label on the
wireless receiver.
Power
consumption
Refer to the main label on the
wireless receiver.
Dimensions
(W x H x D)
Approx.
60 mm x 220 mm x 175 mm
(2.36 inches x 8.66 inches x
6.88 inches)
Design and specications are subject to change
without notice.
About Ferrite Core (Optional)
twice
Surround Sound On/Off
When you turn on surround function, you can enjoy
magnificent surround sound for all the input sound
source with rear speakers.
The initial setting for the surround function is
OFF, turn the surround function ON to use it.
SJ4R/SJ4Y
Surround On: Press and hold REAR LEVEL
o button
on the remote control about 2 seconds.
Surround Off: Press and hold REAR LEVEL
p button
on the remote control about 2 seconds.
SJ5Y
Surround On: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select ON - SURROUND in
the display window.
Surround Off: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select OFF - SURROUND in
the display window.
LG Customer Information Center
1 888 542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
This device complies with Industry Canada’s applicable
licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
(i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall be such
that the equipment still complies with the e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band 5725-
5850 MHz shall be such that the equipment still
complies with the e.i.r.p. limits specied for point-to-
point and non-point-to-point operation as appropriate;
and
(iv) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(devices operating in the band 5250-5350 MHz with
a maximum e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
MFL70205121
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
www.lg.com
SPJ4-S.DCANLLK_SIM_ENG_FRE_5121.indd 1-4 2017-12-19 9:50:42
MANUEL SIMPLIFIÉ
Ensemble de
haut-parleurs
arrière sans l
FRANÇAIS
Veuillez lire attentivement ce manuel avant d’utiliser votre appareil
et conservez-le pour le consulter ultérieurement.
Pour voir les instructions des fonctionnalités avancées, visitez le site
http://www.lg.com et téléchargez le manuel d’utilisation.
Certains éléments de ce manuel pourraient ne pas correspondre à votre appareil,
selon son modèle.
MODÈLE
SPJ4-S
a Branchez le cordon d’alimentation du récepteur
sans l sur la prise.
b Mettez l’appareil principal en marche : l’appareil
et le récepteur sans l seront automatiquement
connectés. Le voyant à DEL vert-jaune du
récepteur s’allume.
Connectez manuellement le récepteur
sans fil
Si les haut-parleurs arrière ne produisent pas de son,
essayez de les connecter manuellement.
a Appuyez sur la touche PAIRING (Jumelage) à
l’arrière du récepteur sans l.
y
Le voyant à DEL jaune-vert du récepteur sans
l clignote rapidement.
b Mettez l’appareil principal en marche.
c Le jumelage est terminé.
y
Le voyant à DEL jaune-vert du récepteur sans
l s’allume.
Connexion des haut-parleurs arrière
1
Connexion du récepteur sans l
2
a Connectez correctement les câbles des haut-
parleurs aux haut-parleurs arrière.
b Connectez le récepteur sans l et les haut-
parleurs arrière (gris : droite, bleu : gauche) aux
câbles des haut-parleurs.
c Activez la fonction Ambiophonie pour proter du
son avec effet ambiophonique.
La conception et la méthode de connexion des
haut-parleurs peuvent être différentes selon
les modèles.
Haut-parleur
(Gauche)
Récepteur
sans l
Haut-parleur
(Droite)
Transparent
Bande noire
Transparent
Bande noire
Informations supplémentaires
Caractéristiques du récepteur sans l
Exigences
électriques
Consultez l’étiquette principale
du récepteur sans l.
Consommation
d’énergie
Consultez l’étiquette principale
du récepteur sans l.
Dimensions
(L x H x P)
Environ
60 mm x 220 mm x 175 mm
(2,36 po x 8,66 po x 6,88 po)
La conception et les caractéristiques peuvent faire
l’objet de modications sans notication préalable.
À propos du noyau de ferrite (En option)
deux fois
Activation et désactivation du son ambiophonique
Lorsque vous activez la fonction Ambiophonie, vous
pouvez profiter d’un magnifique son ambiophonique
de toutes les sources d’entrée audio avec des haut-
parleurs arrière.
Par défaut, la fonction Ambiophonie est
désactivée; activez-la pour pouvoir l’utiliser.
SJ4R/SJ4Y
Activation de la fonction Ambiophonie : Appuyez sur
la touche REAR LEVEL
o de la télécommande et
maintenez-la enfoncée environ deux secondes.
Désactivation de la fonction Ambiophonie : Appuyez
sur la touche REAR LEVEL
p de la télécommande et
maintenez-la enfoncée environ deux secondes.
SJ5Y
Activation de la fonction Ambiophonie : Appuyez
sur la touche AUTO VOL de la télécommande et
maintenez-la enfoncée environ deux secondes. Puis
appuyez à plusieurs reprises sur la touche AUTO VOL
pour sélectionner Activation - AMBIOPHONIE dans la
fenêtre d’afchage.
Désactivation de la fonction Ambiophonie : Appuyez
sur la touche AUTO VOL de la télécommande et
maintenez-la enfoncée environ deux secondes. Puis
appuyez à plusieurs reprises sur la touche AUTO VOL
pour sélectionner Désactivation - AMBIOPHONIE dans
la fenêtre d’afchage.
Avis d’Industrie Canada
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’utilisation
est autorisée aux deux conditions suivantes :
1) Cet appareil ne doit pas provoquer d’interférences;
2) Cet appareil doit accepter toutes les interférences, y
compris celles pouvant entraîner son dysfonctionnement.
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada sur l’exposition aux
rayonnements
Cet appareil est conforme aux limites d’exposition aux
rayonnements d’Industrie Canada pour un environnement non
contrôlé.
Cet appareil doit être installé de façon à garder une distance
minimale de 20 cm (7,8 po) entre l’antenne et votre corps.
REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE
DES INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR
DES MODIFICATIONS NON AUTORISÉES APPORTÉES À
CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT
ANNULER L’AUTORISATION D’UTILISATION ACCORDÉE À
L’UTILISATEUR DE L’APPAREIL.
AVERTISSEMENTS
[Pour un produit doté de la fonction sans l utilisant la
bande de fréquence 5 GHz]
i) L’appareil destiné à la bande de fréquence de 5 150 à
5 250 MHz doit être utilisé à l’intérieur seulement an
de réduire tout risque d’interférences pouvant nuire au
fonctionnement des systèmes satellites mobiles sur un
canal commun;
ii) Pour les appareils avec une ou des antennes amovibles, le
gain d’antenne maximum autorisé pour les appareils dans
les bandes de fréquence de 5 250 à 5 350 MHz et de 5
470 à 5 725 MHz doit être tel que l’équipement demeure
conforme à la limite p.i.r.e.
iii) Pour les dispositifs munis d’antennes amovibles, le gain
maximal d’antenne permis (pour les dispositifs utilisant
la bande de 5 725 à 5 850 MHz) doit être conforme à la
limite de la p.i.r.e. précisée pour l’exploitation point à point
et l’exploitation non point à point, selon le cas;
iv) Les pires angles d’inclinaison nécessaires pour rester
conforme à l’exigence de la p.i.r.e. applicable au masque
d’élévation, et énoncée à la section 6.2.2 (3), doivent être
clairement indiqués. (Les dispositifs fonctionnant dans la
bande de 5 250 à 5 350 MHz et dont la p.i.r.e. maximale
dépasse 200 mW.)
v) Les radars à haute puissance sont attribués comme
utilisateurs principaux (utilisateurs prioritaires) des bandes
de fréquences 5250 à 5350 MHz et 5650 à 5850 MHz,
et ces radars peuvent causer des interférences ou des
dommages aux appareils LE-LAN.
Centre d’information à la clientèle de LG
1 888 542-2623 CANADA
Enregistrez votre produit en ligne!
www.lg.com
MFL70205121
Copyright © 2017 LG Electronics Inc. Tous droits réservés.
www.lg.com
SPJ4-S.DCANLLK_SIM_ENG_FRE_5121.indd 5-8 2017-12-19 9:50:43
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
