Cuisine-Cookware ZBD0700 Manuel utilisateur

Marque: Cuisine-Cookware

Modèle: ZBD0700

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Ce manuel convient également à

Owner’s

Manual

Dishwasher

ZBD6800

ZBD6880

ZBD6890

ZBD0700

ZBD0710

2
Consumer Information
Dishwasher
Your new Monogram dishwasher makes an eloquent statement of style, convenience and kitchen
planning flexibility. Whether you chose it for its purity of design, practical features or assiduous
attention to detail—or for all of these reasons—you’ll find that your Monogram dishwasher’s superior
blend of form and function will delight you for years to come.
The information on the following pages will help you operate and maintain your dishwasher properly.
If you have any other questions, visit our Website at: monogram.com
Introduction
Contents
Appliance Registration  . . . . . . . . . . . . . . . .3, 23, 24
Care and Cleaning  . . . . . . . . . . . . . . . . . . . . . . . . .15
Consumer Services  . . . . . . . . . . . . . . . . . . . . . .3, 20
Model and Serial Number Location  . . . . . . . . . . .3
Operating Instructions  . . . . . . . . . . . . . . . . . . .6–14
Control Panel and Operation  . . . . . . . . . . . .6–8
Lighting Features . . . . . . . . . . . . . . . . . . . . . . . . .9
Water Temperature  . . . . . . . . . . . . . . . . . . . . . .9
Rinse Agent  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Dish Preparation Prior to Loading . . . . . . . . .10
Detergents  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Dishwasher Racks  . . . . . . . . . . . . . . . . . . .11–14
Problem Solver  . . . . . . . . . . . . . . . . . . . . . . . . .16–19
Safety Instructions  . . . . . . . . . . . . . . . . . . . . . . . .4, 5
U.S.A. Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Canada Warranty  . . . . . . . . . . . . . . . . . . . . . . . . .22

Consumer Information

Dishwasher

Before

using

your

dishwasher

Read this manual carefully. It is intended to help

you operate and maintain your new dishwasher

properly.

Keep it handy for answers to your questions.

If you don’t understand something or need more

help, there is a list of toll-free consumer service

numbers included on the Consumer Services

page in the back section of this manual.

Visit our Website at: monogram.com

Write

down the

model &

serial

numbers

You can locate your model and serial numbers

on the tub wall just inside the door.

Before sending in the card, please write these

numbers here:

Model Number

Serial Number

Use these numbers in any correspondence or

service calls concerning your dishwasher.

If you received

a damaged

dishwasher

Immediately contact the dealer (or builder) that

sold you the dishwasher.

Save time

& money

Before you request service, check the Problem

Solver in the back of this manual.

It lists causes of minor operating problems that

you can correct yourself.

If you

need service

To obtain service, see the Consumer Services

page in the back of this manual.

We’re proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are steps to

follow for further help.

For customers in the USA:

FIRST, contact the people who serviced your

appliance. Explain why you are not pleased.

In most cases, this will solve the problem.

NEXT, if you are still not pleased, contact us on

our website, write all the details—including your

phone number—or write to:

Manager, Customer Relations

GE Appliances

Appliance Park

Louisville, KY 40225

For customers in Canada:

FIRST, contact the people who serviced your

appliance. Explain why you are not pleased.

In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the

details—including your phone number—to:

Manager, Consumer Relations

Mabe Canada Inc.

1 Factory Lane, Suite 310

Moncton, N.B. E1C 9M3

CAUTION: To prevent minor injury or property damage

• Contents washed in Anti-bacterial mode, if

available, may be hot to the touch. Use care

before handling.

• Using a detergent that is

not specifically designed

for dishwashers will

cause the dishwasher

to fill with suds.

• If your dishwasher is connected to a

wall switch, ensure that the switch is

on prior to use.

• On dishwashers with electronic controls,

if you choose to turn the wall switch off

between wash cycles, allow 5–10

seconds after turning the switch on

before touching START/RESET to allow

the control to initialize.

• Non-Dishware Items: Do not wash items such

as electronic air cleaner filters, furnace filters and

paint brushes in your dishwasher. Damage to

dishwasher and discoloration or staining of

dishwasher may result.

• Close supervision is necessary if this appliance

is used by or near children.

• Load light, plastic items so they will not

become dislodged and drop to the bottom

of the dishwasher—they might come into

contact with the heating element and be

damaged.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

SAVE THESE INSTRUCTIONS

WARNING! WATER HEATER SAFETY

Under certain conditions, hydrogen gas may be

produced in a water heater that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE.

If the hot water has not been used for two weeks or

more, prevent the possibility of damage or injury by

turning on all hot water faucets and allow them to

run for several minutes. Do this before using any

electrical appliance which is connected to the hot

water system. This simple procedure will allow any

built-up hydrogen gas to escape. Since the gas is

flammable, do not smoke or use an open flame or

appliance during this process.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire

or explosion, electric shock, and to prevent property damage, personal injury, or death.

This dishwasher must be properly installed and located in accordance with the Installation

Instructions before it is used. If you did not receive an Installation Instructions sheet with

your dishwasher, you can receive one by visiting our website at monogram.com.

• Connect to a grounded metal, permanent wiring

system; or run an equipment-grounding conductor

with the circuit conductors and connect to the

equipment-grounding terminal or lead of the

appliance.

• Improper connection of the equipment-grounding

conductor can result in a risk of electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded.

• Dispose of discarded appliances and shipping

or packing material properly.

• Do not attempt to repair or replace any part

of your dishwasher unless it is specifically

recommended in this manual. All other servicing

should be referred to a qualified technician.

• To minimize the possibility of electric shock,

disconnect this appliance from the power supply

before attempting any maintenance.

NOTE: Turning the dishwasher off does not

disconnect the appliance from the power supply.

We recommend having a qualified technician

service your appliance.

PROPER INSTALLATION AND MAINTENANCE

Junked or abandoned dishwashers are

dangerous…even if they will sit for “just a

few days.” If you are getting rid of your old

dishwasher, please follow the instructions below

to help prevent accidents.

Before You Throw Away Your Old Dishwasher:

• Take off the door of the washing compartment

or remove the door latch keeper (as shown).

PROPER DISPOSAL OF THE DISHWASHER

WARNING! RISK OF CHILD ENTRAPMENT

Door

latch

keeper

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

• Use this appliance only for its intended purpose

as described in this Owner's Manual.

• Use only powder, tabs, liquid detergents or rinse

agents recommended for use in a dishwasher and

keep them out of the reach of children. Cascade

Cascade

Complete and Electrasol

Automatic

Dishwashing Detergents, and Jet-Dry

and

Cascade Crystal Clear

rinse agents have been

approved for use in all GE dishwashers.

• Locate sharp items so that they are not likely

to damage the door seal.

• Load sharp knives with the handles up to reduce

the risk of cut-type injuries.

• Do not wash plastic items unless marked

dishwasher safe or the equivalent. For plastic

items not so marked, check the manufacturer's

recommendations.

• Do not touch the heating element during or

immediately after use.

• Do not operate your dishwasher unless all

enclosure panels are properly in place.

• Do not tamper with controls.

• Do not abuse, sit on or stand on the door or dish

rack of the dishwasher.

• Do not allow children to play around dishwasher

when opening or closing door due to the possibility

of small fingers being pinched in door.

• Do not discard a dishwasher without first removing

the door or the door latch keeper of the washing

compartment.

• Do not store or use combustible materials, gasoline

or other flammable vapors and liquids in the vicinity

of this or any other appliance.

• Do not allow children to play with, on or inside this

appliance or any discarded appliance.

WARNING!

When using your dishwasher, follow basic precautions,

including the following:

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

SAVE THESE INSTRUCTIONS

Dishwasher

Control

Settings

Wash Cycles Use the arrow pads to scroll through the wash cycles. The light above or next to the

selected pad will be ON to indicate which WASH CYCLE has been selected.

NOTE: This dishwasher is equipped with an ExtraClean

™

Sensor with automatic temperature

control; therefore, cycle time and total water consumption may vary depending on soil (heavy,

medium, light) and temperature conditions.

ANTI Heavy 9.1 gallons, 95 minutes

BACTERIAL Medium 7.8 gallons, 95 minutes

Light 6.5 gallons, 90 minutes

This cycle raises the water temperature in the final rinse to sanitize your dishware.

The cycle length will vary depending on the temperature of your inlet water.

NOTE: The Anti-Bacterial cycle is monitored for sanitization requirements. If the cycle is interrupted

during or after the main wash portion or if the incoming water temperature is so low that adequate

water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the

sanitized light will not illuminate at the end of the cycle.

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

COOKWARE Heavy 10.4 gallons, 80 minutes

Medium 9.1 gallons, 90 minutes

Light 7.8 gallons, 100 minutes

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle

may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.

NORMAL Heavy 8.75 gallons, 70 minutes

Medium 6.25 gallons, 60 minutes

Light 5 gallons, 55 minutes

This cycle is for medium/heavily soiled dishes and glassware.

SPEED CYCLE 7.8 gallons, 37 minutes

(on some models)

This cycle is for everyday dishes and glassware.

You can locate

your model

number on the

tub wall just

inside the door.

Throughout this

manual,

features and

appearance

may vary from

your model.

1 43

5 6

910

1 3

5 6

910

NSF INTERNATIONAL

Meets NSF Standard 184 Sanitization and Cleaning

performance of household spray-type dishwashers.

Control Panel

ZBD6890 and ZBD0700

ZBD6800 and ZBD6880

ZBD0710

1 43

5 6

910

CHINA 7.8 gallons, 50 minutes

CRYSTAL

This cycle is for lightly soiled china and crystal.

GLASSES Heavy 7.8 gallons, 50 minutes

(on some models)

This cycle is specifically designed for glasses.

PLASTICS Heavy 7.8 gallons, 70 minutes

CYCLE Medium 6.5 gallons, 60 minutes

(on some models) Light 5.2 gallons, 55 minutes

This cycle is specifically designed to reduce the risk of melting plastic items and

improve plastic drying for dishwasher safe plastic items.

RINSE ONLY Heavy 2.6 gallons, 10 minutes

Light 1.3 gallons, 5 minutes

For rinsing partial loads that will be washed later. Do not use detergent with

this cycle.

DELAY START— This option will allow you to delay the start time of any wash cycle for up to 8

or 24 hours (depending on model).

• Select the delay start time you want by pressing the DELAY START pad.

Multiple or continuous pressing will increment the delay hours. Select the

number of hours you want to delay the start of the cycle. Then press

START/RESET.

• After closing the door, the machine will count down and automatically start

at the correct time.

NOTE: To cancel the DELAY START selection before the cycle begins, press the

DELAY START pad until the display is blank. Pressing START/RESET will not cancel

delay hours.

ADDED HEAT— When selected, the cycle will run longer with the heating element on to improve

both wash and dry performance.

NOTE: Cannot be selected with RINSE ONLY cycle.

PRE WASH— For use with heavily soiled and/or dried-on, baked-on soils. This option

(on some models) MUST be selected PRIOR to starting the cycle. This option adds 16 minutes

to the cycle time.

NOTE: Cannot be selected with RINSE ONLY cycle.

HEATED— When selected, turns the drying heater and fan on for fast drying. This option

DRY will extend the cycle time by 30 minutes for the ANTI-BACTERIAL cycle,

38 minutes for the NORMAL cycle and COOKWARE cycle, 8 minutes for the

SPEED cycle, 15 minutes for the PLASTICS cycle and 30 minutes for all other

cycles. When this is NOT selected, the fan will turn on for 4 hours to dry your

dishes without added heat—and energy is saved.

NOTE: Cannot be selected with RINSE ONLY cycle.

LOCK — You can lock the controls to prevent any selections from being made. Or you

can lock the controls after you have started a cycle.

Children cannot accidentally start the dishwasher by touching pads with

this option selected.

To lock the dishwasher controls, press and hold the HEATED DRY pad for

3 seconds. The LOCK light will turn on. To unlock the dishwasher controls, press

and hold the HEATED DRY pad for 3 seconds. The LOCK light will turn off.

Dishwasher

Control Panel/Operation

Status Indicator Lights

(indicators vary by model)

The Status display tells you what is happening while the dishwasher is in operation.

The lights will come ON, indicating the sequence of the dishwasher operation.

SENSING Displayed while the ExtraClean

™

Sensor is measuring the amount of soil and

temperature of water. The dishwasher will adjust the selected cycle to achieve

optimal performance.

ADD-A-DISH Displayed during prewash, indicating that dishes added now will still be cleaned.

WASHING Displayed during prewash, main wash and rinse periods.

DRYING Displayed during HEATED DRY.

SANITIZED Displayed when cycle has met sanitization conditions.

CLEAN Displayed when a wash cycle and enhancements are complete.

Time Remaining Display (on some models)

During operation, the display shows the minutes remaining until the cycle is complete. The display

may adjust the remaining time while the Sensing light is on. The time displayed at the start of

each cycle may change from the factory setting as the unit customizes itself to actual home

usage. During a delay start, the display will show hours of time remaining until the cycle starts.

START/RESET

START— After selecting the cycle and desired enhancements, press the START/RESET pad

one time to ready the dishwasher to begin the cycle. Close the door to start the

cycle or begin the DELAY START countdown. When the cycle starts, the water fill

begins and approximately 60 seconds later the wash action begins.

The dishwasher will always display your last selection and enhancements. If you

don’t want to change the settings, simply press the START/RESET pad one time

to ready the dishwasher and close the door to begin the cycle.

NOTE: If the START/RESET light is flashing, the cycle has been interrupted.

Light will stop flashing after the dishwasher automatically pumps out the water.

Close the door to allow the water to pump out (this takes approximately

70 seconds). When the light stops flashing, the dishwasher can be

reprogrammed and restarted.

Also, if a power failure occurs, NORMAL and HEATED DRY will automatically be

programmed. Make any new selections and press the START/RESET pad to begin

the new cycle.

RESET— Open the door slowly to prevent splash-out. Press the START/RESET pad

to cancel the cycle. Close the door. The dishwasher will pump out and turn off

after 70 seconds.

Clean— The CLEAN light is illuminated and a double beep will sound when the selected

cycle and enhancements are complete. You may remove the dishes at any

time. Note the high-efficiency fan will run quietly for 30 minutes to 4 hours

(depending on selected cycle) after the CLEAN light is illuminated to continue

drying the dishes. This can be stopped by opening the door and pressing

any keypad.

NOTE: To turn off the double beep indicator (or re-activate it if it was previously

disengaged), press the HEATED DRY pad 5 times within 3 seconds. A triple beep

will sound to indicate the end-of-cycle beep option has been toggled.

Dishwasher

Control Panel/Operation

Using the dishwasher

Dishwasher

Water

Temperature

The entering water must be at least 120°F (49°C)

and

not more than 150°F (66°C), for effective

cleaning and to prevent dish damage.

Check the water temperature with a candy or

meat thermometer. Turn on the hot water faucet

nearest the dishwasher, place the thermometer in

a glass and let the water run continuously into the

glass until the temperature stops rising.

Use a

Rinse

Agent

A rinse agent improves dry performance,

reduces spots and prevents new film buildup

on your dishes, glasses, flatware, cookware

and plastic. Jet-Dry

and Cascade Crystal

Clear

are recommended rinse agents for

Monogram Dishwashers.

The rinse agent dispenser holds 3.5 oz. of rinse

agent. Under normal conditions, this will last

approximately one month. Try to keep it full,

but do not overfill.

To fill the rinse agent dispenser, make sure the

dishwasher door is fully open.

Rotate the dispenser cap counterclockwise and

lift it out. Add rinse agent until the indicator

window shows full.

Clean up any spilled rinse agent with a damp

cloth. Replace the dispenser cap.

The amount of rinse agent released into the final

wash can be adjusted. The factory setting is at

the midpoint. If there are rings of calcium (hard

water) spots on dishes, try a higher setting. If

there is foaming, use a lower setting.

To adjust the setting, remove the dispenser cap;

then turn the adjuster counterclockwise to

increase the amount of rinse agent or clockwise

to decrease the amount of rinse agent dispensed.

Rinse agent

adjuster

Indicator

window

Dispenser

cap

Lighting

Features

(on some

models)

Interior Lights (on some models)

The interior Xenon lights provide better visibility

for loading and unloading. They turn on when the

door is opened and turn off when the door is

latched. The lights will turn off after 15 minutes

if the door remains unlatched. To turn the lights

back on, latch and open the door.

Do not attempt to replace the bulbs. If light bulb

replacement is necessary, please contact the

GE Answer Center for service by calling

1.800.626.2000.

End-of-Cycle Indicator Light (on some models)

The end-of-cycle indicator light is located on the

right side of the dishwasher, above the handle.

This light comes on when the selected cycle is

complete. The light will stay on until the door is

opened. The dishes may be removed at any time.

Note that the high-efficiency fan will run quietly

for 30 minutes to 4 hours (depending on the

selected cycle) after the end-of-cycle indicator

light is illuminated to continue drying the dishes.

Opening the door and pressing any keypad will

stop the fan.

Use only detergent specifically made for use in

dishwashers. Cascade

, Cascade Complete

and

Electrasol

Automatic Dishwashing Detergents have

been approved for use in all Monogram Dishwashers.

Keep your powdered detergent fresh and dry. Don’t put

detergent into the dispenser until you’re ready to wash

dishes.

All wash cycles except RINSE ONLY require detergent.

The amount of detergent to use depends on whether

your water is hard or soft.

Protect your dishes and dishwasher by contacting your

water department and asking how hard your water is.

Twelve or more grains is extremely hard water. A water

softener is recommended. Without it, lime can build

up in the water valve, which could stick while open and

cause flooding. Too much detergent with soft water

can cause a permanent cloudiness of glassware,

called etching.

The detergent cup has indicator lines to help you.

Use the right amount of detergent. As a guide:

For Soft water (water hardness less than 4 Grains Per

Gallon [GPG]), fill cup to the first line.

For Medium soft water (4–8 GPG), fill cup to the second line.

For Medium hard water (8–12 GPG), fill cup.

For Extremely hard water (more than 12 GPG), fill both cups.

If the amount of food soil is high, use a bit more detergent.

If water temperature is greater than 140°F, use a bit less

detergent.

Close cover and be sure it is latched after filling dispenser

with detergent.

Do not use hand dish detergent.

NOTE: Using a detergent

that is not specifically designed

for dishwashers will cause the

dishwasher to fill with suds.

During operation, these suds will

spill out of the dishwasher vents,

covering the kitchen floor and making the floor wet.

Because so many detergent containers look alike,

store the dishwasher detergent in a separate space

from all other cleaners. Show anyone who may use the

dishwasher the correct detergent and where it is stored.

While there will be no lasting damage to the dishwasher,

your dishes will not get clean using a dishwashing

detergent that is not formulated to work with dishwashers.

Drying Fan

If the Heated Dry

option is selected,

the drying fan will run

during the drying

portion of the cycle

and up to 2 hours

after the CLEAN light

turns on, depending on the selected wash cycle. If the

Heated Dry option is not used, the CLEAN light will come

on at the end of the final rinse and the fan will run up to

4 hours, depending on the selected wash cycle.

If the Rinse Only wash cycle is selected, the Heated Dry

option is automatically turned off and the drying fan will

run for 4 hours.

If the drying fan is running and the CLEAN light is on, the

drying fan can be turned off by opening the door and

pressing any key on the keypad.

Detergents

Pre-wash

section

Cover

latch

Main wash

section

Using the dishwasher

Dishwasher

Dish

Preparation

Prior to

• No prerinsing of normal food soil is required.

• Scrape off hard soils, bones, toothpicks, skins and seeds.

• Remove large quantities of any remaining food.

• Remove leafy vegetables, meat trimmings and

excessive amounts of grease or oil.

Forget

to Add

a Dish?

A forgotten dish can be added any time before the

main wash.

1. Open the door slightly.

2. Wait until the water spray action stops. Steam may

rise out of the dishwasher.

3. Add forgotten dishes.

4. Close the door.

MAIN WASH

PRE

WASH

Extremely

hard

Soft Medium

hard

Medium

soft

Loading the Racks

Dishwasher

Upper Rack

Features and appearance of racks and

silverware basket may vary from your model.

Although the upper rack is for glasses, cups and

saucers, pots and pans can be placed in this

rack for effective cleaning. Cups and glasses fit

best along the sides and should be placed open-

end down. This is also a secure place for

dishwasher plastics.

The utility shelf (on some models) may be placed

in the up or down position to add flexibility.

A wine glass holder (on some models) secures

wine glasses for best washability. Because wine

glasses come in various sizes, after loading,

slowly push in the rack to make sure they will

clear the top of the dishwasher.

The upper rack is good for all kinds of

odd-shaped utensils. Saucepans, mixing bowls

and other items should be placed face down.

Fold-down tines (on some models) provide

flexibility for extra-large and hard-to-fit items.

Secure larger dishwasher-safe plastics over

2 tines when possible.

Make sure small plastic items are secure so they

can’t fall onto the heater.

Be sure that items do not protrude through the

bottom of the rack and block rotation of the

middle spray arm. This will result in poor wash

performance for items in the upper rack.

Check to make sure that no items in the lower

rack will block rotation of the wash arm mounted

under the upper rack.

Type A

To load flatware, simply push the adjustable

handle to either side (on some models).

Put flatware in the removable basket with fork

and knife handles up to protect your hands.

Place spoons in the basket with handles down.

Mix knives, forks and spoons so they don’t nest

together. Distribute evenly. Small plastic items,

such as measuring spoons and lids from small

containers should go in the bottom of the

silverware basket with the silverware on top.

This could block the wash arm and cause poor

washing results.

The one-piece silverware basket can be placed

in the front, right side or back of the lower rack.

Type B

A variety of options are available regarding the

three-piece silverware basket (on some models)

in your dishwasher. The complete basket is

designed to fit on the right side of the lower rack.

Additionally, each end of the basket is removable

to add loading flexibility to accommodate

flatware and lower rack capacity needs.

The lids of both end and middle baskets can be

opened and closed to contain small items. Long

items can be placed on the utility shelf in the

upper rack.

The standard position of your adjustable rack

is “up”, which allows for maximum clearance for

your taller items in the lower rack. If you have

taller wine glasses, tumblers or other items to

place in the upper rack, you may want to adjust

the rack to the lower position.

To lower the rack, support the weight of the rack

with your hands as shown, and press both finger

pads about 1/4″ toward the inside of the rack

as indicated, guiding the rack down to its lower

position.

To raise the rack to the “up” position, pull up on

the center of the rack side frame until the rack

locks into place.

Loading the Racks

Dishwasher

Adjustable

Upper Rack

(on some

models)

Silverware

Basket

Don’t let any

item extend

through bottom.

To remove end baskets, grasp the basket

at opposite corners and slide apart.

One-piece basket (on some models)

Three-piece basket (on some models)

Cutlery Tray

The cutlery tray holds up to 4 large knives such as

a carver, chef’s knives, bread knife, etc., that are too

tall to fit in the silverware basket.

Hook the tray onto the rear of the upper rack.

Lay the knives between the guides (as shown).

Bowl Tines

The special large-bowl tines in the lower rack add

flexibility to your loading pattern. They are useful

for serving bowls or other large bowls.

To use the bowl tines, fold down the 2 rows of flex

tines in front of the bowl tines and load bowls just

as you would in the upper rack.

You can remove the upper rack to allow space for

large items in the lower rack.

To remove the upper rack, push thumb tab out and

remove the front end caps on each side of the rail.

Pull the rack straight out and off the rails.

Replace the end caps, then push the rails all the

way back into the dishwasher. Slide the shower

nozzle attachment over the spout.

Then fill the lower rack and begin your cycle.

NOTE: Nozzle must be in place with upper rack

removed. If not installed properly, poor wash

performance and noise will result.

NOTE: Don’t forget to remove the shower nozzle

attachment before you replace the upper rack.

Lower Rack

The lower rack is best used for plates, saucers and

cookware. Large items such as broiler pans and

baking racks should go along the left-hand side.

Load platters, pots and bowls along the sides, in

corners or in the back. The soiled side of items

should face the center of the rack, or they can be

placed soil side down. If necessary, oversized

glasses and mugs can be placed in the lower rack

to maximize loading flexibility.

Also, be careful not to let a portion of an item such

as a pot or dish handle extend through the bottom

rack. This could block the wash arm and cause poor

washing results.

Fold-down tines (on some models) provide flexibility

for extra-large and hard-to-fit items. The tines may

be left in the up position or folded down to customize

the lower rack.

Be sure tall tines in the lower rack do not block the

spray arm above them. Check for this by spinning

the arm when both racks are pushed all the way in.

Shower nozzle

attachment

These tines fold down

Large-bowl tines

Remove the

Upper Rack

Extra Rack

Features

(on some

models)

Loading the Racks

Dishwasher

Remove end cap

Push thumb tab

these

guidelines

for loading

10 and

12 place

settings

Loading the Racks

Dishwasher

Features and appearance of racks and silverware baskets may vary from your model.

Upper Rack—10 place settings Lower Rack—10 place settings

Upper Rack—12 place settings Lower Rack—12 place settings

Care and Cleaning

Dishwasher

Exterior

To clean the control panel, use a lightly dampened cloth, then dry thoroughly. To clean the exterior

painted panels, use a good appliance polish wax. See the note below about wax on stainless steel

panels.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

The stainless steel panels can be cleaned with CERAMA BRYTE

Stainless Steel Appliance Cleaner

or a similar product using a clean, soft cloth. You can order CERAMA BRYTE

Stainless Steel Appliance

Cleaner

through GE Parts by calling 800.626.2002 (for U.S. only). In Canada, call 1.888.880.3030.

NOTE: Avoid streaks on stainless steel panels. Do not use wax on stainless steel panels.

Protect

Against

Freezing

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

1. Turn off electrical power to the dishwasher. Remove fuses or trip circuit breaker.

2. Turn off the water supply and disconnect the water inlet line from the water valve.

3. Drain water from the water inlet line and water valve (use a pan to catch the water).

4. Reconnect the water inlet line to the water valve.

The Air

Gap

An air gap protects your dishwasher against water

backing up into it if a drain clogs. The air gap is not

a part of the dishwasher. It is not covered by your

warranty. Not all plumbing codes require air gaps,

so you may not have one.

A plugged or dirty air gap will prevent the

dishwasher from draining properly. Clean it out

if the dishwasher is not draining properly.

The air gap is easy to clean.

1. Turn off the dishwasher and lift off the chrome

cover.

2. Unscrew or unsnap the plastic cap (depending

on model) and clean with a toothpick.

Interior

The stainless steel used to make the dishwasher tub and inner door provides the highest reliability

available in a GE dishwasher. If the dishwasher tub or inner door should be scratched or dented

during normal use, they will not rust or corrode. These surface blemishes will not affect their function

or durability.

Check the air gap any time your

dishwasher isn’t draining well.

PROBLEM POSSIBLE CAUSE WHAT TO DO

Control panel lights go Time too long between • Each pad must be touched within 30

off when you’re setting touching of selected pads seconds of the others. To relight, touch any

controls pad again, or unlatch and relatch door.

Noise Detergent cup opening • This is normal.

The motor stopping during

the drying period

Water draining out of the

tub immediately after you

touch the START/RESET pad

Drying fan running for 2–4

hours after CLEAN light is

illuminated (Top Control

Panel models only)

Utensils are not secure • Make sure everything is secured in

in the rack or something dishwasher.

small has dropped into

the rack

Motor hums • Dishwasher has not been used on a regular

basis. If you do not use your dishwasher

often, run a RINSE ONLY cycle once every

week. This will help keep the seal moist.

Detergent left in Dishes are blocking the • Reposition the dishes.

dispenser cups detergent cups

Water standing in the This is normal • A small amount of clean water around the

bottom of the tub outlet on the tub bottom at the back of the

tub keeps the water seal lubricated.

Water won’t pump out Drain is clogged • If you have an air gap, clean it.

of the tub

• Check to see if your kitchen sink is

draining well. If not, you may need a plumber.

• If the dishwasher drains into a disposer,

run disposer clear.

Suds Correct detergent • Use only automatic dishwasher detergents

wasn’t used to avoid sudsing. Cascade

, Cascade

Complete

and Electrasol

dishwasher

detergents have been approved for use

in all Monogram dishwashers.

• To remove suds from the tub, open the

dishwasher and let suds dissipate. Touch START.

Let run for 30 seconds. Touch START again.

Dishwasher will pump out in 70 seconds.

Repeat if necessary.

Rinse agent was spilled • Always wipe up rinse agent spills

immediately.

Stained dishwasher Some tomato-based foods • Use of the RINSE ONLY cycle after adding

parts can cause pink or orange the dish to the load can decrease the level

stains of staining.

• GE also recommends Cascade

Plastic

Booster

™

to help remove these types of stains.

Before You Call For Service

Dishwasher

Questions?

Use this

problem

solver

Questions?

Use this

problem

solver

PROBLEM POSSIBLE CAUSE WHAT TO DO

Dishes and flatware Low inlet water • Make sure inlet water temperature is at least

not clean temperature 120°F (49°C) (see Using the Dishwasher section).

• Run water at the nearest faucet prior to

starting the dishwasher to insure optimal water

temperature.

Water pressure is • Turn on a faucet. Is water coming out

temporarily low more slowly than usual? If so, wait until

pressure is normal before using your

dishwasher.

Air gap is clogged • Clean air gap.

Improper rack loading • Make sure large dishware does not block the

detergent dispenser or the wash arms.

• Glasses and dishes must face the spray arms.

Spots and filming on • Use Jet Dry

or Cascade Crystal Clear

rinse

glasses and flatware agents to remove spots and prevent new film

buildup.

• Make sure water temperature is at least 120°F.

• Load dishwasher as shown in the Loading

Place Settings section.

• Make sure detergent is fresh.

• If water is extremely hard, a softener may

be required.

Cloudiness on glassware Combination of soft water • This is called etching and is permanent.

and too much detergent To prevent this from happening, use less

detergent if you have soft water. Wash

glassware in the shortest cycle that will get

it clean. See page 10.

Water temperature • Lower the water heater temperature.

entering the dishwasher

exceeds 150°F (66°C)

Black or gray marks on Aluminum utensils have • Remove marks with a mild, abrasive

dishes rubbed against dishes cleaner.

Extremely hard water

Low inlet water temperature

Overloading the dishwasher

Improper loading

Old or damp powder

detergent

Rinse agent dispenser empty

Too little detergent

Before You Call For Service

Dishwasher

Questions?

Use this

problem

solver

PROBLEM POSSIBLE CAUSE WHAT TO DO

Yellow or brown film Tea or coffee stains • Remove the stain by hand, using a solution

on inside surfaces of 1/2 cup bleach and 3 cups warm water.

CAUTION:Before cleaning

interior, wait at least 20 minutes after a

cycle for the heating element to cool

down. Failure to do so can result in burns.

An overall yellow or brown • A special filter in the water supply line is

film can be caused by iron the only way to correct this problem.

deposits in water Contact your GE dealer or a water softener

company

White film on inside Hard water minerals • GE recommends Jet-Dry

or Cascade

surfaces Crystal Clear

to help prevent hard water

mineral deposits from forming.

• Run dishwasher with citric acid to remove

mineral deposits. Citric acid (Part number:

WD35X151) can be ordered through GE

Parts. See the Consumer Services page

for ordering information.

CAUTION:Before cleaning

interior, wait at least 20 minutes after a cycle

for the heating element to cool down. Failure

to do so can result in burns.

Dishes don’t dry Low inlet water • Select HEATED DRY.

temperature

• Make sure inlet water temperature is at least

120°F (49°C) (see Using the Dishwasher section).

• Select ADDED HEAT.

• Use a longer cycle, such as Antibacterial.

Rinse agent dispenser is • Check and refill the rinse agent dispenser.

empty

Dishwasher won’t run Door not latched • Make sure door is fully closed and latched.

Wall switch • Check for a wall switch that the dishwasher

(some installations) is in might be connected to. A wall switch is

the “off” position required by electrical codes in some

localities. Turn the switch “on” if it is “off.”

Fuse is blown, or the • Replace fuse or reset circuit breaker. Remove

circuit breaker tripped any other appliances from the circuit.

Dishwasher control • Turn off power at the circuit breaker

is inoperative for 30 seconds, then reset power.

Steam This is normal • Warm moisture comes through the vent

on the bottom of the door during drying

and when water is being pumped out.

Before You Call For Service

Dishwasher

Before You Call For Service

Dishwasher

Questions?

Use this

problem

solver

PROBLEM POSSIBLE CAUSE WHAT TO DO

Sanitized light does not The door was opened and • Do not interrupt the cycle any time during

illuminate at the end of the cycle was interrupted or after main wash.

the cycle (Anti-Bacteria during or after the main

cycle only) wash portion

Low inlet water • Raise the water heater temperature to

temperature at least 120°F (49°C).

Interior lights not Door was open for more • Latch the door and reopen.

working than 15 minutes

Bulbs are burned out • Call for service to replace bulbs.

End-of-cycle indicator Dishwasher has not • Open the door and check the status

light does not illuminate completed cycle indicator lights on control panel to

determine if cycle is complete.

Beeps every 30 seconds Door was opened • Close the door to complete the cycle.

during the cycle

START/RESET light blinks START/RESET pad was • Dishwasher will pump out for approximately

pressed during the cycle 70 seconds and blinking light will turn off.

Power failure during • Dishwasher will pump out for approximately

the cycle 70 seconds and blinking light will turn off.

Dishwasher will automatically restart using

NORMAL WASH and HEATED DRY.

Consumer Services

Dishwasher

With the purchase of your new Monogram appliance, receive

the assurance that if you ever need information or assistance

from GE, we’ll be there. All you have to do is call—toll- free!

GE Answer

Center

In the USA:

800.626.2000

Whatever your question about any Monogram major appliance, GE Answer Center

information

service is available to help. Your call—and your question—will be answered promptly and

courteously. And you can call any time.

Visit our Website at: monogram.com

In Canada, call 1.888.880.3030.

Monogram

Preferred Service

In the USA:

800.444.1845

In Canada:

1.888.880.3030

A GE consumer service professional will provide expert repair service, scheduled at a time that’s

convenient for you. Many GE Consumer Service company-operated locations offer you service

today or tomorrow, or at your convenience (8:00 a.m. to 8:00 p.m. weekdays, 9:00 a.m. to 4:00

p.m. Saturdays). Our factory-trained technicians know your appliance inside and out—so most

repairs can be handled in just one visit.

Service Contracts

In the USA:

800.626.2224

In Canada:

1.888.880.3030

You can have the secure feeling that GE Consumer Service will still be there after your warranty

expires. Purchase a GE contract while your warranty is still in effect and you’ll receive a substantial

discount. With a multiple-year contract, you’re assured of future service at today’s prices.

Parts and

Accessories

In the USA:

800.626.2002

In Canada:

1.888.880.3030

Individuals qualified to service their own appliances can have parts or accessories sent directly

to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine

Renewal Parts are fully warranted.

User maintenance instructions contained in this manual cover procedures intended to be

performed by any user. Other servicing generally should be referred to qualified service

personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

For Customers

With Special

Needs…

In the USA:

800.626.2000

GE offers Braille controls for a variety of GE appliances, and a brochure

to assist in planning a barrier-free kitchen for persons with limited mobility.

Consumers with impaired hearing or speech who have access to a

TDD or a conventional teletypewriter may call 800.TDD.GEAC

(800.833.4322) to request information or service.

monogram.com

La page charge ...

Cuisine-Cookware ZBD0700 Manuel utilisateur

Marque: Cuisine-Cookware

Modèle: ZBD0700

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Cuisine-Cookware ZBD0700 User manual

Documents connexes

Cuisine-Cookware ZBD6880 Manuel utilisateur

Cuisine-Cookware ZBD0700 Manuel utilisateur

Ce manuel convient également à

Cuisine-Cookware ZBD0700 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents