Ubiquiti UniFi UAP-FlexHD Guide de démarrage rapide

Marque: Ubiquiti

Modèle: UniFi UAP-FlexHD

Taper: Guide de démarrage rapide

UniFi AP FlexHD Base Mount Outdoor Mount

Wall/Pole Mount PoE Adapter* (48V, 0.32A) Power Cord

Zip Ties (Qty. 2) Screws (Qty. 2) Screw Anchors (Qty. 2)

Package Contents

* Included only in the single-pack of the UAP-FlexHD

Installation Requirements

Phillips screwdriver

Cat5/6 UTP cable for indoor installations

Shielded Category 5 (or above) cabling should be used for all outdoor wired

Ethernet connections and should be grounded through the AC ground of the

PoE.

System Requirements

UAP-FlexHD Quick Start Guide

LED

UniFi Cloud Key or Dream Machine, or machine running Linux, Mac OS X, or

Windows 7/8/10

Java Runtime Environment 1.8 or above recommended

Web Browser: Google Chrome (Other browsers may have limited functionality.)

UniFi Controller software v5.11.31 or newer (available at: ui.com/download/unifi)

Hardware Overview

White Factory default, waiting to be integrated.

Flashing White Initializing.

Alternating White/Blue

Device is busy; do not touch or unplug it. This

usually indicates that a process such as a

firmware upgrade is taking place.

Blue Indicates the device has been successfully

integrated into a network and is working properly.

UAP-FlexHD Quick Start Guide

Ethernet Port

Reset Button

Quickly Flashing Blue

This is used to locate an AP.

When you click Locate in the UniFi Controller

software, the AP will flash. It will also display the

location of the AP on the map.

Steady Blue with

Occasional Flashing

Indicates the device is in an isolated state (all

WLANs are brought down until an uplink is found).

This Gigabit Ethernet port is used to connect 802.3af PoE power and should be

connected to the LAN and DHCPserver.

The Reset button serves two functions for the UniFi AP:

Restart Press and release the Reset button quickly.

Restore to Factory Default Settings Press and hold the Reset button for

more than five seconds.

Installation

Determine the installation location of the UAP FlexHD:

Desktop The UAP FlexHD stands freely on a horizontal surface such as a

desktop or table/shelf. Good for temporary installations.

Wall The UAP FlexHD is attached to a wall in a secure location.

Ceiling The UAP FlexHD is mounted in a ceiling tile (requires optional recessed

ceiling mount assembly, sold separately).

Pole The UAP FlexHD is attached to a pole (indoor or outdoor).

Note: When installing Ethernet cabling on a pole or up the outer surface of

a wall, use RJ45 connectors without strain-relief boots on them. This will

prevent unnecessary tension on the cable ends.

Cable without a strain-relief boot Cable with a strain-relief boot

Proceed to the appropriate section for your installation.

Desktop

UAP-FlexHD Quick Start Guide

Wall

UAP-FlexHD Quick Start Guide

Ceiling (Optional Accessory)

Use the optional Ceiling Mount, Mount Cover, and Back Plate

Assembly to install the UAP FlexHD on a drop tile ceiling or

horizontal surface where the interior side of the Ceiling Mount

is accessible.

UAP-FlexHD Quick Start Guide

Pole

Note: If you are mounting the UAP-FlexHD outdoors, it must be installed in

the upright position to prevent water from getting into the base of the

device.

UAP-FlexHD Quick Start Guide

Connecting Power

UAP-FlexHD Quick Start Guide

Optional

Software Installation

UAP-FlexHD Quick Start Guide

Download and install the latest version of the UniFi Controller software. Launch it

and follow the on-screen instructions. The software and step-by-step instructions

in the User Guide are available at: ui.com/download/unifi

After you have installed the software and run the UniFi Installation Wizard, a login

screen will appear for the UniFi Controller management interface. Enter the

username and password that you created and click Sign In.

You can manage your wireless network and view network statistics using the

UniFi Controller management interface. For information on configuring and using

the UniFi Controller software, refer to the User Guide.

Mobile App Installation

Ubiquiti also offers the UniFi app, which is available from the App Store® (iOS) or

Google Play™ Store (Android). You can use it to provision a UniFi AP for basic

functionality without configuring a UniFi Controller. It also allows seamless

provisioning of APs for remote controllers (controllers not on the same Layer 2

network) and easy access to local controllers and those monitored on unifi.ui.com

Specifications

UAP-FlexHD

Dimensions Ø 48.50 x 159.49 mm (1.90 x 6.28")

Weight 315 g (0.69 lb)

Networking Interface (1) 10/100/1000 Ethernet Port

Button Reset

LED System

Power Method 802.3af PoE

UAP-FlexHD Quick Start Guide

UAP-FlexHD

Power Supply 802.3af PoE

48V, 0.32A Gigabit PoE Adapter

Max. Power Consumption 10.5W

Supported Voltage Range 44 - 57VDC

Operating Frequency 2.4 GHz

5 GHz

Max. TX Power

2.4 GHz 23 dBm

5 GHz 26 dBm

Throughput

2.4 GHz 300 Mbps

5 GHz 1733 Mbps

Antenna Gain

2.4 GHz 1.6 dBi

5 GHz 4 dBi

Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2

Wireless Security WEP, WPA-PSK,

WPA-Enterprise (WPA/WPA2, TKIP/AES)

Mounting Desktop/Wall/Ceiling/Pole

Operating Temperature -30 to 70° C (-22 to 158° F)

Operating Humidity 5 to 95% Noncondensing

Certifications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can be submerged by water.

WARNING: Avoid using this product during an electrical storm. There may be a

remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements

indicated on the manufacturer’s label. Connection to a different power source than those

specified may result in improper operation, damage to the equipment or pose a fire hazard if

the limitations are not followed.

UAP-FlexHD Quick Start Guide

2. There are no operator serviceable parts inside this equipment. Service should be provided

only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has an integral safety

ground wire intended for connection to a grounded safety outlet.

a. Do not substitute the power cord with one that is not the provided approved type. Never

use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the

grounding wire.

b. The equipment requires the use of the ground wire as a part of the safety certification,

modification or misuse can provide a shock hazard that can result in serious injury or

death.

c. Contact a qualified electrician or the manufacturer if there are questions about the

installation prior to connecting the equipment.

d. Protective earthing is provided by Listed AC adapter. Building installation shall provide

appropriate short-circuit backup protection.

e. Protective bonding must be installed in accordance with local national wiring rules and

regulations.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis,

and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions.

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operations of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

This radio transmitter has been approved by FCC.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions:

UAP-FlexHD Quick Start Guide

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired

operation of the device.

This radio transmitter has been approved by ISED Canada.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-3(A)/NMB-3(A)

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Le présent émetteur radio a été approuvé par ISDE Canada.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une

utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de

satellites mobiles utilisant les mêmes canaux.

IMPORTANT NOTE

Radiation Exposure Statement

This equipment complies with radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with minimum distance 21 cm between the

radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

AVIS IMPORTANT

Déclaration sur l’exposition aux rayonnements

Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans

un environnement non contrôlé.

Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y

ait une distance minimale de 21 cm entre l’élément rayonnant et vous.

Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre

émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.

Australia and New Zealand

Warning: This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

Brazil

Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e

não pode causar interferência em sistemas devidamente autorizados.

UAP-FlexHD Quick Start Guide

La page charge ...

Ubiquiti UniFi UAP-FlexHD Guide de démarrage rapide

Marque: Ubiquiti

Modèle: UniFi UAP-FlexHD

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Ubiquiti UniFi UAP-FlexHD Quick start guide

Ubiquiti UniFi UAP-FlexHD Guide de démarrage rapide

Ubiquiti UniFi UAP-FlexHD Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents