Parkside PAPK 12 A3 Manuel utilisateur

12-V-AKKU 2 Ah

Bedienungsanleitung

2Ah 12V BATTERY

Operating instructions

BATTERIE 12 V, 2 Ah

Mode d’emploi 12 V-ACCU 2 Ah

Gebruiksaanwijzing

AKUMULATOR 12V,

2 Ah

Instrukcja obsługi

12V AKUMULÁTOR,

2 Ah

Návod k obsluze

12 V AKUMULÁTOR,

2 Ah

Návod na obsluhu

2Ah 12V BATTERY

12-V-AKKU 2 Ah

BATTERIE 12 V, 2 Ah

PAPK 12 A3

IAN 351899_2007

BATERÍA DE 12 V, 2 Ah

Instrucciones de uso

GENOPLADELIGT 12 V

BATTERI, 2 Ah

Betjeningsvejledning

GB Operating instructions Page 1

DE Bedienungsanleitung Seite 21

FR Mode d’emploi Page 41

NL Gebruiksaanwijzing Pagina 67

CZ Návod k obsluze Strana 87

PL Instrukcja obsługi Strona 107

SK Návod na obsluhu Strana 127

ES Instrucciones de uso Página 147

DK Betjeningsvejledning Side 167

A

Ladezeiten

Charging times

Temps de charge

Ladeströme

Charging currents

Courants

de charge

2 Ah

Batterie

Battery pack

Batterie

PAPK 12 A1

2 Ah

Batterie

Battery pack

Batterie

PAPK 12 A2/A3

4 Ah

Batterie

Battery pack

Batterie

PAPK 12 B1

max. 2,4 A

Ladegerät

Charger

Chargeur

PLGK 12 A1/A2

60 min

2,4 A

60 min

2,4 A

120 min

2,4 A

max. 4,5 A

Ladegerät

Charger

Chargeur

PLGK 12 B2

60 min

2,4 A

45 min

3,5 A

60 min

4,5 A

max. 4,5 A

Ladegerät

Charger

Chargeur

PDSLG 12 A1

60 min

2,4 A

45 min

3,5 A

60 min

4,5 A

Leistungsstarker Lithium-Ionen-Akku

Cell Balancing – längere Akku-Laufzeit, erhöhte Akku-Lebensdauer

Höhere Akku-Ressource durch gleichmäßig beanspruchte Zellen

Schöpft das Ladungspotenzial maximal aus

High-performance Li-Ion battery

Cell Balancing – longer battery life, increased battery lifespan.

Higher battery resources due to evenly used cells. · Maximises

the charge potential.

Batterie lithium-ions

Cell Balancing – plus grande autonomie et plus grande longévité

de la batterie · Meilleure capacité de la batterie grâce à un

équilibrage entre elles des cellules sollicitées · Exploite au

maximum le potentiel de charge

Alle Parkside Geräte und die Ladegeräte PLGK12A1/

A2/B2/PDSLG 12 A1 der X12V Team Serie sind mit dem

Akku-Pack PAPK12A1/A2/A3/B1 kompatibel.

All Parkside tools and the chargers PLGK12A1/A2/B2/

PDSLG 12 A1 of the X12V Team series are compatible

with the PAPK12A1/A2/A3/B1 battery pack.

Tous les outils Parkside et les chargeurs PLGK12A1/A2/

B2/PDSLG 12 A1 de la série X12V Team sont compatibles

avec la batterie PAPK12A1/A2/A3/B1.

12V max.

10,8V

PAPK 12 A3 GB│IE │ 1 ■

Contents

Introduction ........................2

Intended use ............................. 2

Features ................................ 3

Package contents ......................... 3

Technical speciﬁcations .................... 3

General Power Tool Safety Warnings ..5

Extended safety guidelines .................. 7

Charging the battery pack (seeﬁg. A) ..8

Maintenance and storage ............9

Kompernass Handels GmbH warranty 10

Service ...........................15

Importer .........................15

Disposal ..........................16

Notes on the EC Declaration

ofConformity .....................18

Ordering a replacement battery ......19

Telephone ordering ......................20

PAPK 12 A3■ 2 │ GB│IE

Introduction

Congratulations on the purchase of your new appli-

ance. You have chosen a high-quality product. The

operating instructions are part of this product. They

contain important information about safety, usage and

disposal. Before using the product, please familiarise

yourself with all of the operating and safety instruc-

tions. Use the product only as described and for the

range of applications speciﬁed. Please also pass these

operating instructions on to any future owner.

Intended use

This rechargeable battery is suitable for:

This rechargeable battery is not intended for commer-

cial use. Any other usage of or modiﬁcation to the

appliance is deemed to be improper and carries a

signiﬁcant risk of accidents. The manufacturer accepts

no responsibility for damage attributable to misuse.

PAPK 12 A3 GB│IE │ 3 ■

Features

Battery pack

Release buttons

Red charge control LED

Green charge control LED

High-speed charger (not supplied)

Package contents

1 2Ah 12V battery

1 set of operating instructions

Technical speciﬁcations

PAPK 12 A3

Type LITHIUM ION

Rated voltage 12 V (DC)

Capacity 2000 mAh/24 Wh

Cells 3

PAPK 12 A3■ 4 │ GB│IE

Use only X12V Team Series high-speed battery

chargers to charge the battery pack:

(not supplied).

High-speed battery charger PLGK 12 A1

INPUT

Rated current 220–240 V ∼,

50–60 Hz (AC)

Rated power consumption 50 W

OUTPUT

Rated voltage 12 V (DC)

Rated current 2400 mA

Charging time approx. 60 min

Fuse (internal) 2 A

T2A

Protection class II / (double insulation)

ATTENTION!

► This charger can only charge the following

batteries: PAPK 12 A1/PAPK 12 A2/

PAPK12A3/PAPK 12 B1.

► A current list of battery compatibility can be

found at www.lidl.de/akku.

PAPK 12 A3 GB│IE │ 5 ■

General Power Tool

Safety Warnings

WARNING!

■Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁre and/or serious

injury. Save all warnings and instructions for

future reference.

a) Charge a rechargeable battery unit using only

the charger recommended by the manufacturer.

Chargers are often designed for a particular type

of rechargeable battery unit. There is the danger

of ﬁre if other types of rechargeable battery units

are used.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

PAPK 12 A3■ 6 │ GB│IE

c) When they are not being used, store recharge-

able battery units away from paperclips, coins,

keys, nails, screws or other small metal objects

that could cause the contacts to be bridged.

Short-circuiting the contacts of a rechargeable

battery unit may result in heat damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens, avoid

contact with the ﬂuid. If contact occurs, ﬂush

the aﬀected area with water. Seek additional

medical help if any of the ﬂuid gets into your

eyes. Escaping battery ﬂuid may cause skin

irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

Protect the rechargeable

battery from heat, for example from continuous

exposure to sunlight, ﬁre, water and moisture.

There is a risk of explosion.

PAPK 12 A3 GB│IE │ 7 ■

Extended safety guidelines

■Do not use a damaged or modiﬁed battery.

Damaged or modiﬁed batteries may behave

unexpectedly and cause ﬁres, explosions or pose

a risk of injury.

■Do not expose a battery to ﬁre or excessively

high temperatures. Fire or temperatures in excess

of 130°C (265°F) can cause an explosion.

■Follow all instructions regarding charging and

never charge the battery or the cordless tool

outside the temperature range given in the

operating instructions.

Incorrect charging or charging outside of the

permissible temperature range can destroy the

battery and increase the risk of ﬁre.

PAPK 12 A3■ 8 │ GB│IE

Charging the battery pack

(seeﬁg. A)

CAUTION!

► Always unplug the appliance before you

remove the battery pack from or connect the

battery pack to the charger.

NOTE

► Never charge the battery pack if the ambient

temperature is below 10°C or above 40°C.

If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The storage climate

should be cool and dry and the ambient

temperature should be between 0°C and

50°C.

♦ Insert the battery pack into the high-speed

charger .

♦ Insert the power plug into the socket. The charge

control LED lights up red.

PAPK 12 A3 GB│IE │ 9 ■

♦ The green charge control LED indicates that

charging is complete and the battery pack is

ready for use.

♦ Push the battery pack into the appliance.

♦ You should always switch the high-speed

charger oﬀ for at least 15 minutes between

successive charging processes. Also disconnect

the power plug from the mains power socket.

Maintenance and storage

■ If you do not intend to use the battery for an

extended period, remove it from the appliance

and store it in a clean, dry place out of direct

sunlight.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The optimum storage

environment is cool and dry.

■Never try to repair damaged batteries.

Maintenance of batteries should only be carried

out by the manufacturer or an approved customer

service centre.

PAPK 12 A3■ 10 │ GB│IE

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from the

date of purchase. If this product has any faults, you,

the buyer, have certain statutory rights. Your statutory

rights are not restricted in any way by the warranty

described below.

Warranty conditions

The warranty period starts on the date of purchase.

Please keep your receipt in a safe place. This will be

required as proof of purchase.

If any material or manufacturing fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

or refund the purchase price (at our discretion). This

warranty service requires that you present the defec-

tive appliance and the proof of purchase (receipt)

within the three-year warranty period, along with a

brief written description of the fault and of when it

occurred.

PAPK 12 A3 GB│IE │ 11 ■

If the defect is covered by the warranty, your product

will either be repaired or replaced by us. The repair

or replacement of a product does not signify the

beginning of a new warranty period.

X 12 V and X 20 V Team Series battery packs

come with a 3-year warranty valid from the date of

purchase.

Warranty period and statutory claims for

defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must

be reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

PAPK 12 A3■ 12 │ GB│IE

Scope of the warranty

This appliance has been manufactured in accord-

ance with strict quality guidelines and inspected

meticulously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product parts

subject to normal wear and tear or to fragile parts

which could be considered as consumable parts

such as switches or parts made of glass.

The warranty does not apply if the product has been

damaged, improperly used or improperly main-

tained. The directions in the operating instructions

for the product regarding proper use of the product

are to be strictly followed. Uses and actions that are

discouraged in the operating instructions or which

are warned against must be avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall

be deemed void in cases of misuse or improper

handling, use of force and modiﬁcations / repairs

which have not been carried out by one of our

authorised Service centres.

PAPK 12 A3 GB│IE │ 13 ■

The warranty period does not apply to

■ Normal reduction of the battery capacity

over time

■ Commercial use of the product

■ Damage to or alteration of the product by the

customer

■ Non-compliance with safety and maintenance

instructions, operating errors

■ Damage caused by natural hazards

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(e.g. IAN 12345) available as proof of purchase.

■ You will ﬁnd the item number on the type plate on

the product, an engraving on the product, on the

front page of the operating instructions (below

left) or on the sticker on the rear or bottom of the

product.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

PAPK 12 A3■ 14 │ GB│IE

■ You can return a defective product to us free

of charge to the service address that will be

provided to you. Ensure that you enclose the

proof of purchase (till receipt) and information

about what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and installation soft-

ware at www.lidl-service.com.

This QR code will take you directly to the Lidl service

page (www.lidl-service.com) where you can open

your operating instructions by entering the item

number (IAN) 351899_2007.

PAPK 12 A3 GB│IE │ 15 ■

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: kom[email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: kom[email protected]

IAN 351899_2007

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

La page est en cours de chargement...

Parkside PAPK 12 A3 Manuel utilisateur

Parkside PAPK 12 A3 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents