RUGGED BLUETOOTH KEYBOARD

WITH TRACKPAD

USER’S MANUAL

FOR APPLE IPAD 10.9” (10TH GEN)

INTRODUCTION

The UAG Rugged Bluetooth Keyboard with Trackpad offers 360° unstoppable protection. Utilizing

a rugged, non-slip exterior, the rugged keyboard represent’s UAG’s commitment to protection. With

Bluetooth connectivity, the keyboard offers superior laptop-style typing experience and tracking,

back-lit keys, and spill resistance. Low power Bluetooth connectivity keeps your keyboard running

• Spill-resistant keyboard

• Detachable device case

• Adjustable magnetic stand with four viewing angles

• Secure multi-device paring (up to 2 devices)

• USB-C charging

• Sleep/wake function

• Dedicated multi-media keys

COMPATIBILITY

• iPad 10.9” (10th Gen)

Please visit www.urbanarmorgear.com for the latest information and compatibility information.

PACKAGE CONTENTS

• Rugged Bluetooth Keyboard

• Rugged Case

• USB-C charge cable

• User’s Manual

CASE INSTALLATION

1. Place your case on a flat surface.

2. Align your device’s camera with the camera opening on the case.

3. Insert your device at an angle starting at the top (camera side).

6. Unfold the keyboard cover and place it on a flat surface.

7. Take your device in the case and rest it in the center groove above the keyboard as shown below.

Ensure the case is oriented with the Pencil holder on top. You should feel the magnets engage.

VIEWING ANGLE ADJUSTMENT

The Rugged Bluetooth Keyboard features built-in magnets that work together with the cover-stand

to create 4 viewing angles.

the desired position is found. You should feel the magnets engage as you adjust the cover-stand.

TO POWER ON:

Locate the Power key on the top right corner of your keyboard. Press and hold the Power key

for 1 second until the power LED lights up solid, then release.

TO POWER OFF:

Press and hold the Power key for 3 seconds. The power LED will flash 3 times, indicating the

keyboard has been powered off.

STANDBY MODE:

Your keyboard will go into Standby mode after 40 seconds of inactivity. Press any key to wake

it.

1. Ensure your device’s Bluetooth connection is enabled.

2. Press and hold the 1 or 2 key for 3 seconds. Release the key after the LED on the Power key

begins flashing rapidly. Your keyboard is now in pairing mode.

3. Go to your device Bluetooth settings and search for “UAG Keyboard 0XXXX”. The last four digits

should coincide with the digits listed on the white label located to the left of the track pad.

4. Select the appropriate keyboard on your Bluetooth device list.

Press fn + “B” key. This will cause the LED indicator on the Power key to flash one of the following

ways:

1. Four flashes = ~ 80% - 100% battery life.

2. Three flashes = ~60% - 79% battery.

3. Two flashes = ~35% - 59% battery.

4. One flash = low battery <34%

To help preserve battery life, your Bluetooth Keyboard will enter sleep mode if left on and not used

for several minutes; press any key to wake it.

NOTE: The backlights will automatically turn off after 40 seconds if not used. Begin typing again to

activate them.

MICROPHONE: Activates Siri

LANGUAGE SYMBOL: Toggles between keyboard languages (if active on your device).

KEYBOARD HIDE/SHOW: Hides or shows your device’s on-screen keyboard.

PREVIOUS TRACK: Skips to the previous track on your selected playlist.

PLAY/PAUSE: Starts or pauses your current playlist.

NEXT TRACK: Skips to the next track on your selected playlist.

MUTE: Mutes your device’s audio.

VOLUME DOWN: Decreases your device’s volume.

VOLUME UP: Increases your device’s volume.

POWER: Turns your keyboard on/off. Hold for 1 second to power ON, 3 seconds to power Off.

CAPS LOCK: Activates the Caps Lock feature. When Caps Lock is on, an indicator light will

remain lit until it is turned off. To turn Caps Lock off, press Caps again.

TRACKPAD

The Trackpad supports most common Multi-Touch gestures including:

• Swipe

• Tap

• Pinch

• Scroll

1 YEAR LIMITED WARRANTY

For warranty terms and conditions visit urbanarmorgear.com/warranty or call (833)984-2UAG

For latest install guide and addtional help, scan QR code

or visit urbanarmorgear.com/install

the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) L’ appareil ne doit pas produire de brouillage; (2) L’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’ en compromettre le fonctionnement.

Ingredients (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

Cable X O O O O O

PWAs X O O O O O

Plastic Parts O O O O O O

Membrane O O O O O O

Meter Parts X O O O O O

*iPad and Apple Pencil not included • Apple®, Apple Pencil®, and iPad® are registered trademarks of Apple Inc. The Bluetooth® word

mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Urban Armor Gear is under license.

PATENTS PENDING ©2022 URBAN ARMOR GEAR. All rights reserved. URBAN ARMOR GEAR® and UAG® logo are registered trademarks

of URBAN ARMOR GEAR. LLC., Laguna Niguel, CA. All other trademarks and registered trademarks are the property of their respective

owners.

DECLARATION OF CONFORMITY

Hereby, Urban Armor Gear, LLC declares that the wireless device is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of

the EU declaration of conformity is available at the following internet address: https://www.urbanarmorgear.com/EU-DOC

PATENTS PENDING ©2023 URBAN ARMOR GEAR. All rights reserved. URBAN ARMOR GEAR® and UAG® logo are registered trademarks

of URBAN ARMOR GEAR. LLC., Laguna Niguel, CA. All other trademarks and registered trademarks are the property of their respective