TOA BDA012AYMJ Chentech LLC Pendant Speaker 2AYM Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

!
1. Make sure all items listed in the BOX CONTENTS are included in the box.!
2. READ ASFETY INSTRUCTIONS BEFORE USING THE PRODUCT.!
3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE
BATTERY PROR TO FIRST USE FOR MAXIMUM BATTERY LIFE.!
!
Go to www.playwithyourproxy.com for product registration.!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
1
BOX CONTENTS!
!
Proxy!
Wristband!
Micro USB Cable!
Power Adapter
!GETTING STARTED
!BUTTON FUNCTIONS
Power On:!!!Press and hold button for 4 seconds to power on!
Power Off:!!!Press and hold button for 2 seconds to power off!
Launch Siri/S-Voice:! ! Press button to activate Siri/S-Voice!
Cancel Siri/S-Voice:! ! Press button to cancel Siri/S-Voice!
!
!
Lower Volume:! ! Press and hold button to lower volume!
Previous Song/Video:!! Press button to play previous song/video!
!
!
Answer:!!!Press button to answer incoming call!
Hang-up Call:!!!Press button to hang-up call!
Ignore Incoming Call:! ! Press and hold button for 1 second!
Play Song/Video:! ! Press button to play song/video!
Pause Song/Video:! ! Press button to pause song/video!
Connect Proxy:! ! Press button (Must already be paired)!
Disconnect Proxy:! ! Press and hold button for 3 seconds!
!
Increase Volume:! ! Press and hold to increase volume!
Next Song/Video:! ! Press button to play next song/video!
!
1. Press and hold the power button for 4 seconds. The Proxy’s
Red and Blue LEDs will blink rapidly. !
2. Navigate to your Bluetooth device’s setup screen, find!
“The Proxy” and connect.!
3. If your device asks for a password or pin, skip or cancel!
the password or pin input screen.!
Note: The next time you approach The Proxy with your
dddBluetooth device, it will automatically re-pair.!
4. To pair a new device, press and hold the phone button for 3
dddseconds to break the current connection. The red and blue
dddLEDs will flash repeatedly. Repeat Step 2.!
5. If your Bluetooth device is not able to pair to The Proxy, hold !
phone button for 3 seconds to break previous Bluetooth c
dddconnections and power the Proxy off, then back !
aaaNote: If you experience trouble pairing or playing music!
sssupdate your devices’s OS.!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
2
!PAIRING A BLUETOOTH DEVICE
PROXY LED ACTIVITY!
!
Blinking Red and Blue LEDs
Not Paired/No Connection!
Blinking Blue LED!
Paired and Connected!
Solid Red LED!
Charging!
Blinking Red and Blue LEDs!
In Broadcast Pairing Mode!
No LED activity !
No Powered on/Sleep Mode!
Safety Information
IC
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec
une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device!
must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable
exposure conditions without restriction.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AYMJ-BDA01
  • Page 1 1
  • Page 2 2
  • Page 3 3

TOA BDA012AYMJ Chentech LLC Pendant Speaker 2AYM Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à