Kenwood DNX210EX Manuel utilisateur

DNX210EX

GPS NAVIGATION SYSTEM

AUDIO INSTRUCTION MANUAL

SYSTÈME DE NAVIGATION GPS

MODE D’EMPLOI

SISTEMA DE NAVEGACIÓN GPS

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best

performance from your new GPS Navigation System.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the

warranty card, and in the space provided below. Refer to the model and serial numbers

whenever you call upon your Kenwood dealer for information or service on the product.

Model DNX210EX Serial number

US Residence Only

Register Online

Register your Kenwood product at

www.Kenwoodusa.com

2

|

DNX210EX

Contents

Safety precautions 3

Notes 4

General fegatures 6

Power

Selecting the Source

Volume

Attenuator

Audio Control

Audio Setup

Bass Boost

Speaker Setting

Switching Display

Subwoofer Output

TEL Mute

Tuner features 10

Tuning

Tuning Mode

Station Preset Memory

Auto Memory Entry

Preset Tuning

CD/Audio file/External disc control

features 12

Playing CD & Audio file

Playing External Disc

Fast Forwarding and Reversing

Track/File Search

Disc Search/Folder Search

Track/File/Disc/Folder Repeat

Scan Play

Random Play

Magazine Random Play

Text/Title Scroll

Folder Select

HD Radio control features 15

About HD Radio

Tuning

Menu system 16

Menu System

Touch Sensor Tone

Manual Clock Adjustment

SI (System Indicator)

Display Illumination Control

Dimmer

Switching preout

Supreme Setting

CRSC (Clean Reception System Circuit)

Receive mode Setting

Electronic Serial Number (ESN) display

Auxiliary Input Display Setting

Text Scroll

CD Read Setting

Demonstration mode Setting

Troubleshooting Guide 21

Specifications 23

English

|

3

2WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting

and wiring work to professionals.

2CAUTION

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• When replacing a fuse, only use a new fuse with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

Do Not Load 3-in. CDs in the CD slot

If you try to load a 3 in. CD with its adapter into the

unit, the adapter might separate from the CD and

damage the unit.

About CD players/disc changers connected

to this unit

Kenwood disc changers/ CD players released in 1998

or later can be connected to this unit.

Refer to the catalog or consult your Kenwood dealer

for connectable models of disc changers/ CD players.

Note that any Kenwood disc changers/ CD players

released in 1997 or earlier and disc changers made by

other makers cannot be connected to this unit.

Connecting unsupported disc changers/CD players to

this unit may result in damage.

Set the "O-N" Switch to the "N" position for the

applicable Kenwood disc changers/ CD players.

The functions you can use and the information that

can be displayed may differ depending on the models

being connected.

¤

• You can damage both your unit and the CD changer if you

connect them incorrectly.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condensation on the lens may not allow CDs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

The "AAC" logo is trademark of Dolby

Laboratories.

Safety precautions

4

|

DNX210EX

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check with

your Kenwood dealer to make sure that they work

with your model and in your area.

• The characters which can be displayed by this unit

are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |

~ .

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

How to reset your unit

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when the

Reset button is pressed.

• Press the Reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with

a cloth moistened with neutral cleaner, then wipe it

again with a clean soft dry cloth.

¤

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth or

using a volatile liquid such as thinner or alcohol may scratch

the surface or erases characters.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode Setting> (page 20).

About Audio file

• Playable Audio file

AAC (.m4a), MP3 (.mp3), WMA (.wma)

• Playable disc media

CD-R/RW/ROM

• Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

Although the audio files are complied with the

standards listed above, the play maybe impossible

depending on the types or conditions of media or

device.

• Playing order of the Audio file

In the example of folder/file tree shown below, the

files are played in the order from to .

CD

v



()

<: Folder

v: Audio 



v



v

v

v.



v

Folder

Audio file

An online manual about audio files is put on the

site, www.kenwood.com/audiofile/. On this online

manual, detailed information and notes which are not

written in this manual are provided. Make sure to read

through the online manual as well.

English

|

5

Handling CDs

• Do not touch the recording surface of the CD.

• Do not stick tape etc. on the CD, or use a CD with

tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

• When removing CDs from this unit, pull them out

horizontally.

• If the CD center hole or outside rim has burrs,

use the CD only after removing the burrs with a

ballpoint pen etc.

CDs that cannot be used

• CDs that are not round cannot be used.

• CDs with coloring on the recording surface or CDs

that are dirty cannot be used.

• This unit can only play the CDs with

.

This unit may not correctly play discs which do not

have the mark.

• You cannot play a CD-R or CD-RW that has not been

finalized. (For the finalization process refer to your

CD-R/CD-RW writing software, and your CD-R/CD-

RW recorder instruction manual.)

About Satellite Radio tuner

This unit supports Satellite Radio tuners which are

released by SIRIUS and XM.

Refer to the instruction manual of Satellite radio tuner.

2CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

In compliance with Federal Regulations, following

are reproductions of labels on, or inside the product

relating to laser product safety.

Kenwood Corporation

2967-3, ISHIKAWA-MACHI,

HACHIOJI-SHI

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS N0.21 CFR

1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

FCC WARNING

This equipment may generate or use radio

frequency energy. Changes or modifications to this

equipment may cause harmful interference unless

the modifications are expressly approved in the

instruction manual. The user could lose the authority

to operate this equipment if an unauthorized change

or modification is made.

NOTE

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment may cause harmful interference to radio

communications, if it is not installed and used in

accordance with the instructions. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

6

|

DNX210EX

General features

Power

Turning ON the Power

Press the [POWER] button.

Turning OFF the Power

Press the [POWER] button for at least 1 second.

Selecting the Source

Press the [POWER] button.

Source required Display

Satellite radio (Optional accessory) "SAT"

Tuner or HD Radio (Optional accessory) "TUNER" or "HD RADIO"

CD "CD"

External disc (Optional accessory) "CD CH"

Auxiliary input "AUX"

Auxiliary input (Optional accessory) "AUX EXT"

Standby (Illumination only mode) "STANDBY"

⁄

• An equipment such as a portable audio player can

be connected to the auxiliary input terminal using a

commercially available mini-plug (3.5ø).

Volume

Increasing Volume

Turn the [VOL] knob clockwise.

Decreasing Volume

Turn the [VOL] knob counterclockwise.

Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time you press the button, the Attenuator

turns ON and OFF.

When the Attenuator is ON, the "ATT" indicator

blinks.

FM

AM

POWER

B.BOOST

ATT

VOL

Auxiliary input

Control knob

ATT indicator

BOOST indicator

• Use the mini-plug which is stereo type and does not

have any resistance.

• The navigation unit outputs audio guidance together

with the sound of the audio source. The volume of the

audio guidance can be adjusted with the navigation

unit. For more details, refer to the Instruction Manual for

the navigation unit.

Clock display

English

|

7

Audio Control

1

Select the source to adjust

Press the [POWER] button.

2 Enter Audio Control mode

Press the [VOL] knob.

3 Select the Audio item to adjust

Press the [VOL] knob.

Each time you press the knob, the item to be

adjusted alternates between the items shown in

the table below.

4 Adjust the Audio item

Turn the [VOL] knob.

Adjustment Item Display Range

Subwoofer level "SW L" –15 — +15

System Q "NATURAL"/"ROCK"/

"POPS"/"EASY"/"TOP40"/

"JAZZ"

Natural/Rock/

Pops/Easy/Top 40/

Jazz

Bass level "BAS L" –8 — +8

Middle level "MID L" –8 — +8

Treble level "TRE L" –8 — +8

Balance "BAL" Left 15 — Right 15

Fader "FAD" Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

⁄ About System Q

• You can recall the best sound setting preset for different

types of music.

• Change each setting value with the <Speaker Setting>

(page 8). First, select the speaker type with the Speaker

setting.

• "USER": The ranges selected lastly for Bass level, Middle

level, and Treble level are recalled automatically.

5 Exit Audio Control mode

Press any button.

Press a button other than the [VOL] knob and [ATT]

button.

Audio Setup

Setting the Sound system, such as Volume offset.

1 Select the source to adjust

Press the [POWER] button.

2 Enter Audio Setup mode

Press the [VOL] knob for at least 1 second.

3 Select the Audio Setup item to adjust

Press the [VOL] knob.

Each time you press the knob, the item to be

adjusted alternates between the items shown in

the table below.

4 Adjust the Audio setup item

Turn the [VOL] knob.

Adjustment Item Display Range

Low Pass Filter "LPF" 80/120/160/Through Hz

Volume offset "V-OFF" –8 — ±0 (AUX : –8 — +8)

⁄

• Volume offset: Sets each source’s volume as a difference

from the basic volume.

5 Exit Audio Setup mode

Press the [VOL] knob for at least 1 second.

Bass Boost

Bass sound can be enhanced by one-touch

operation.

Press the [B.BOOST] button.

When you press the button once, the current Bass

Boost setting is displayed.

Each time you press the button, the Bass Boost

setting alternates.

Setting Display

Bass Boost 1 "BB-L L1"

Bass Boost 2 "BB-L L2"

Bass Boost off "BB-L OFF"

8

|

DNX210EX

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal

when setting the speaker type.

1 Enter Standby

Press the [POWER] button.

Select the "STANDBY" display.

2 Enter Speaker Setting mode

Press the [VOL] knob.

3 Select the Speaker type

Turn the [VOL] knob.

Each time you turn the knob, the setting alternates

between the settings shown in the table below.

Speaker type Display

OFF "SP OFF"

For 5 & 4 in. speaker "SP 5/4"

For 6 & 6x9 in. speaker "SP 6*9/6"

For the OEM speaker "SP OEM"

4 Exit Speaker Setting mode

Press the [VOL] knob.

Switching Display

Changing the information displayed.

1 Enter Switching Display mode

Press the Control knob for at least 1 second.

"DISP SEL" is displayed.

2 Select the Display item

Push the Control knob towards [4] or [¢].

In Tuner source

Information Display

Frequency "FREQ"

Clock "CLOCK"

In CD & External disc source

Information Display

Disc title "D-TITLE"

Track title "T-TITLE"

Track number & Play time "P-TIME"

Clock "CLOCK"

In Audio file source

Information Display

Song title & Artist name "TITLE"

Album name & Artist name "ALBUM"

Folder name "FOLDER"

File name "FILE"

Track number & Play time "P-TIME"

Clock "CLOCK"

In HD Radio source

Information Display

Station name "ST NAME"

Song title/ Artist name/

Album name/ Genre

"TITLE"

Frequency "FREQ"

Clock "CLOCK"

In Satellite radio source

Information Display

Channel name "CH NAME"

Song title "SONG"

Artist name "ARTIST"

Composer name "COMPOSER"

Category name "CATEGORY"

Label name "LABEL"

Comment "COMMENT"

Band & Channel number "CH NUM"

Clock "CLOCK"

In Standby/ Auxiliary input source

Information Display

Source name "SRC NAME"

Clock "CLOCK"

3 Exit Switching Display mode

Press the Control knob.

⁄

• If the selected display item does not have any

information, alternative information is displayed.

• When you select the clock display, the display setting of

each source will be changed to the clock display.

• Album name cannot be displayed in WMA file.

English

|

9

TEL Mute

The audio system automatically mutes when a call

comes in.

When a call comes in

"CALL" is displayed.

The audio system pauses.

Listening to the audio during a call

Press the [POWER] button.

The "CALL" display disappears and the audio system

comes back ON.

When the call ends

Hang up the phone.

The "CALL" display disappears and the audio system

comes back ON.

⁄

• To use the TEL Mute feature, you need to hook up

the MUTE wire to your telephone using a commercial

telephone accessory.

Subwoofer Output

Turning the Subwoofer output ON or OFF.

Push the Control knob toward [AM] for at least

2 seconds.

Each time you push the knob, Subwoofer output

switches ON and OFF.

When it is ON, "SW ON" is displayed.

10

|

DNX210EX

Tuner features

Tuning

Selecting the station.

1 Select tuner source

Press the [POWER] button.

Select the "TUNER" display.

2 Select the band

Push the Control knob towards [FM] or [AM].

Each time you push the knob toward [FM], it

switches between the FM1, FM2, and FM3 bands.

3 Tune up or down band

Push the Control knob towards [4] or [¢].

⁄

• During reception of stereo stations the "ST" indicator is

ON.

Tuning Mode

Choose the tuning mode.

Press the [AUTO] button.

Each time you press the button, the Tuning mode

alternates between the modes shown in the table

below.

Tuning mode Display Operation

Auto seek "AUTO 1" Automatic search for a station.

Preset station seek "AUTO 2" Search in order of the stations in

the Preset memory.

Manual "MANUAL" Normal manual tuning control.

English

|

11

Station Preset Memory

Putting a station in the memory.

1 Select the band

Push the Control knob towards [FM] or [AM].

2 Select the frequency to put in the memory

Push the Control knob towards [4] or [¢].

3 Put the frequency in the memory

Press the desired [1] — [6] button for at least 2

seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory

on each [1] — [6] button.

Auto Memory Entry

Putting stations with good reception in the memory

automatically.

1 Select the band for Auto Memory Entry

Push the Control knob towards [FM] or [AM].

2 Open Auto Memory Entry

Press the [AME] button for at least 2 seconds.

"A-MEMORY" is displayed.

When 6 stations that can be received are put in the

memory Auto Memory Entry closes.

Preset Tuning

Recalling the stations in the memory.

1 Select the band

Push the Control knob towards [FM] or [AM].

2 Recall the station

Press the desired [1] — [6] button.

12

|

DNX210EX

CD/Audio file/External disc control features

English

|

13

Fast Forwarding and Reversing

Fast Forwarding

Hold down toward [¢] with the Control knob.

Release to resume the playback.

Reversing

Hold down toward [4] with the Control knob.

Release to resume the playback.

⁄

• There is no sound while the Audio file is being searched.

• The accurate track time is not displayed during fast

forwarding or reversing of the Audio file.

Track/File Search

Searching for a song on the disc or in the Audio file

folder.

Push the Control knob towards [4] or [¢].

Function of disc changer/ Audio file

Disc Search/Folder Search

Selecting the disc set in the Disc changer or the

folder recorded on the Audio file media.

Push the Control knob towards [FM] or [AM].

Track/File/Disc/Folder Repeat

Replaying the song, disc in the Disc changer or

Audio file folder you are listening to.

Press the [REP] button.

Each time you press the button, the Repeat Play

alternates between the modes shown in the tables

below.

In CD & External disc source

Repeat play Display

Track Repeat "TRAC REP"

Disc Repeat (In Disc Changer) "DISC REP"

OFF "REP OFF"

In Audio file source

Repeat play Display

File Repeat "FILE REP"

Folder Repeat "FOLD REP"

OFF "REP OFF"

Scan Play

Playing the first part of each song on the disc or

Audio file folder you are listening to and searching

for the song you want to hear.

1 Start Scan Play

Press the [SCAN] button.

"TRAC SCN"/"FILE SCN"/"SCAN ON" is displayed.

2 Release it when the song you want to listen to

is played

Press the [SCAN] button.

14

|

DNX210EX

CD/Audio file/External disc control features

Random Play

Play all the songs on the disc or Audio file folder in

random order.

Press the [RDM] button.

Each time you press the button, Random Play turns

ON or OFF.

When the Random mode is ON, "DISC RDM"/"FOLD

RDM"/"RDM ON" is displayed.

⁄

• When you push the Control knob toward [¢], the next

random song starts.

Function of disc changer

Magazine Random Play

Play the songs on all the discs in the disc changer in

random order.

Press the [M.RDM] button.

Each time you press the button, the Magazine

Random Play turns ON or OFF.

When the Magazine Random mode is ON, "MGZN

RDM" is displayed.

⁄

• When you push the Control knob toward [¢], the next

random song starts.

Function of Audio file

Folder Select

Quickly selecting the folder you want to hear.

1 Enter Folder Select mode

Press the [F.SEL] button.

"FLD SEL" is displayed.

During Select mode the folder information is

displayed as shown below.

Folder name display

Displays the current folder name.

2 Select the folder level

Push the Control knob towards [FM] or [AM].

With the [FM] of the Control knob, you move 1

level down and with the [AM] of the Control knob,

1 level up.

Selecting a folder in the same level

Push the Control knob towards [4] or [¢].

With the [4] of the Control knob, you move

to the previous folder, and with the [¢] of the

Control knob, to the next folder.

Returning to the top level

Press the [3] button.

Scrolling the folder name display

Push the Control knob toward [FM] for at least

2 seconds.

3 Decide the folder to play

Press the Control knob.

The Folder Select mode releases, and the Audio file

in the folder being displayed plays.

Cancelling the Folder Select mode

Press the [F.SEL] button.

Text/Title Scroll

Scrolling the displayed CD text, Audio file text, or

MD title.

Push the Control knob toward [FM] for at least

2 seconds.

⁄

• When the <Display Illumination Control> (page 17) is set

to OFF, the display may black out while scrolling.

English

|

15

HD Radio control features

About HD Radio

• When you connect an HD Radio, Tuner features

of the unit are disabled and changed to HD Radio

tuner features. A portion of the setting methods

including the Tuning Mode will change.

• With the HD Radio tuner, you can use the similar

functions to <Station Preset Memory>, <Auto

Memory Entry>, <Tuning Mode>, and <Preset

Tuning> of Tuner features. Refer to Tuner features

for how to use the functions.

Tuning

Selecting the station.

1 Select HD Radio source

Press the [POWER] button.

Select the "HD RADIO" display.

2 Select the HD FM band

Push the Control knob toward [FM].

Each time you push the knob to [FM], the band

alternates between the HF1, HF2, and HF3 bands.

Select the HD AM band

Push the Control knob toward [AM].

3 Tune up or down band

Push the Control knob towards [4] or [¢].

16

|

DNX210EX

Menu system

Menu System

Setting beep sound during operation, etc.

functions.

The Menu system basic operation method is

explained here. The reference for the Menu items

and their setting content is after this operation

explanation.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select the menu item

Push the Control knob towards [FM] or [AM].

Example: When you want to set the beep sound

select the "BEEP" display.

3 Set the menu item

Push the Control knob towards [4] or [¢].

Example: When you select "BEEP", each time you

push the knob it alternates between

"BEEP ON" or "BEEP OFF". Select 1 of them

as the setting.

You can continue by returning to step 2 and

setting other items.

4 Exit Menu mode

Press the [MENU] button.

⁄

• When other items those applicable to the basic

operation method above are displayed, their setting

content chart is entered. (Normally the setting listed at

the top of the chart is the original setting.)

Also, the explanation for items that are not applicable

(<Manual Clock Adjustment> etc.) are entered step by

step.

English

|

17

In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound)

ON/OFF.

Display Setting

"BEEP ON" Beep is heard.

"BEEP OFF" Beep is canceled.

In Standby mode

Manual Clock Adjustment

1 Select Clock Adjustment mode

Push the Control knob towards [FM] or [AM].

Select the "CLK ADJ" display.

2 Enter Clock Adjust mode

Press the Control knob for at least 1 second.

The clock display blinks.

3 Adjust the hours

Push the Control knob towards [FM] or [AM].

Adjust the minutes

Push the Control knob towards [4] or [¢].

4 Exit Clock adjustment mode

Press the [MENU] button.

In Standby mode

SI (System Indicator)

The red indicator blinks when the ignition key of

the vehicle is at the OFF position.

Display Setting

"SI ON" LED flashes.

"SI OFF" LED OFF.

Display Illumination Control

This function turns off the display when you

perform no operation for 5 seconds. This function is

effective when you are driving at night.

Display Setting

"DISP ON" Keeps the display on.

"DISP OFF"

Turns off the display when you perform no

operation for 5 seconds.

⁄

• Set the Display Illumination Control when the

<Demonstration mode Setting> (page 20) is set to OFF.

• When the display is off, pressing any key will turn on the

display.

• When the display is off, you cannot perform any

operation except for the following:

• Volume

• Attenuator

• Selecting the source

• Turning off the power

• During function control, such as the Menu System, the

display stays on.

Dimmer

You can lower the brightness of the display by using

the dimmer function.

Display Setting

"DIM ON" The display dims.

"DIM OFF" The display doesn’t dim.

18

|

DNX210EX

Menu system

In Audio file source

Supreme Setting

When AAC, MP3 or WMA files encoded at a low bit

rate (less than 96kbps (fs=32k, 44.1k, 48kHz)) are

played, this function restores their high frequency

region to approach the sound quality of equivalents

of these files encoded at a high bit rate. Processing

is optimized for the compression format used (AAC,

MP3, or WMA), and adjustment is made for the bit

rate used.

Display Setting

"SPRM ON" Plays sound using the Supreme function.

"SPRM OFF" Plays the original sound stored in the audio file.

⁄

• The sound effect may be imperceptible depending

on the relationship between the audio file format and

setting.

In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to

mono to reduce multi-path noise when listening to

the FM station.

Display Setting

"CRSC ON" The CRSC is ON.

"CRSC OFF" The CRSC is OFF.

⁄

• Strong electrical fields (such as from power lines) may

cause unstable sound quality when CRSC is turned ON.

In such a situation, turn it OFF.

In HD Radio mode

Receive mode Setting

Sets the receive mode.

1 Select the Receive mode

Push the Control knob towards [FM] or [AM].

Select the "HDR MODE" display.

2 Enter Receive mode

Press the Control knob for at least 1 second.

3 Set the Receive mode

Push the Control knob towards [FM] or [AM].

Each time you push the knob, the Receive mode

alternates between the modes shown in the table

below.

Receive mode Display Operation

Auto mode "AUTO"

Analog broadcasts and digital

broadcasts will be switched

automatically.

When both are being transmitted,

the digital broadcast will have

priority.

Digital "DIGITAL" Digital broadcasts only.

Analog "ANALOG" Analog broadcasts only.

4 Exit Receive mode

Press the [MENU] button.

⁄

• Even if the Receive mode is set to "AUTO", when the Ball

game mode program (non-delayed broadcast program)

is received, the Receive mode will automatically switch

to Analog broadcast only.

In Standby mode

Switching preout

Alternating the preout between the rear and

subwoofer. (With the subwoofer the sound outputs

without being effected by fader control.)

Display Setting

"SWPRE R" Rear preout.

"SWPRE SW" Subwoofer preout.

English

|

19

In Satellite radio source

Electronic Serial Number (ESN)

display

Displaying the Electronic Serial Number.

Display

"ESN ************"

⁄

• Electronic Serial Number (ESN)

It is important to retain the unit serial number and the

electronic Satellite radio Identification number for service

activation and potential service changes.

Auxiliary Input Display Setting

Selecting the display when alternating to Auxiliary

input source.

1 Select Auxiliary input source

Press the [POWER] button.

Select the "AUX"/"AUX EXT" display.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

3 Select Auxiliary input display setting mode

Push the Control knob towards [FM] or [AM].

Select the "NAME SET" display.

4 Enter Auxiliary input display setting mode

Press the Control knob for at least 1 second.

The selected Auxiliary input display is displayed.

5 Select the Auxiliary input display

Push the Control knob towards [4] or [¢].

Each time you push the knob, the display alternates

as listed below.

• "AUX"/"AUX EXT"

• "DVD"

• "PORTABLE"

• "GAME"

• "VIDEO"

• "TV"

6 Exit Auxiliary input display setting mode

Press the [MENU] button.

⁄

• When operation stops for 10 seconds, the name at that

time is registered, and the Auxiliary input display setting

mode closes.

• You can only set the Auxiliary input display when the

built-in auxiliary input or the auxiliary input of optional

KCA-S220A is used.

Text Scroll

Setting the displayed text scroll.

Display Setting

"SCL AUTO" Repeats scroll.

"SCL MANU" Scrolls when the display changes.

⁄

• The text scrolled is listed below.

- CD text

- Folder name/ File name/ Song title/ Artist name/

Album name

- MD title

- Text for the Satellite radio source, HD Radio source,

including Channel name, etc.

In Standby mode

CD Read Setting

When there is a problem with playing a CD with

special format, this setting plays the CD by force.

Display Setting

"CD READ1" Play CD and Audio file.

"CD READ2" Play CD by force.

⁄

• Some music CDs may not play even in the "CD READ2"

mode.

20

|

DNX210EX

Menu system

In Standby mode

Demonstration mode Setting

Sets the demonstration mode.

1 Select the Demonstration mode

Push the Control knob towards [FM] or [AM].

Select the "DEMO" display.

2 Set the Demonstration mode

Press the Control knob for at least 2 seconds.

Each time you press the knob at least 2 seconds,

the Demonstration mode alternates between the

settings shown in the table below.

Display Setting

"DEMO ON" The Demonstration mode function is ON.

"DEMO OFF" Exit Demonstration mode (Normal mode).

La page charge ...

Kenwood DNX210EX Manuel utilisateur

Ce manuel convient également à

Kenwood DNX210EX Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents