Hamilton Beach 58870 Mode d'emploi

Marque: Hamilton Beach

Modèle: 58870

Catégorie: Mélangeurs

Taper: Mode d'emploi

READ BEFORE USE

LIRE AVANT UTILISATION

LEA ANTES DE USAR

Visit www.hamiltonbeach.com for our

complete line of products and Use and

Care Guides – as well as delicious recipes,

tips, and to register your product online!

Rendez-vous sur www.hamiltonbeach.ca

pour notre liste complète de produits et de

nos manuels utilisateur – ainsi que nos

délicieuses recettes et nos conseils

Visite www.hamiltonbeach.com (

EE. UU.)

www.hamiltonbeach.com.mx (México)

para ver otros productos de Hamilton Beach

o para contactarnos

Questions

Please call us – our friendly

associates are ready to help.

USA: 1.800.851.8900

Preguntas

Por favor llámenos – nuestros

amables representantes están

listos para ayudar.

EE. UU.: 1.800.851.8900

MEX: 800 71 16 100

Le invitamos a leer cuidadosamente este

instructivo antes de usar su aparato.

Questions

N’hésitez pas à nous appeler –

nos associés s’empresseront

de vous aider.

CAN : 1.800.267.2826

English ....................... 2

Français .................... 21

Español .................... 40

Blender

Mélangeur

Licuadora

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or

injury to persons, including the following:

1. Read all instructions.

2. This appliance is not intended for use by persons with reduced

physical, sensory, or mental capabilities, or lack of experience

and knowledge, unless they are closely supervised and instructed

concerning use of the appliance by a person responsible for their

safety.

3. This appliance shall not be used by children. Keep the appliance

and its cord out of reach of children.

4. Close supervision is necessary when any appliance is used near

children. Children should be supervised to ensure that they do not

play with the appliance.

5. To protect against risk of electrical shock, do not put cord, plug,

base, or motor in water or other liquid.

6. Turn the appliance OFF( ), then unplug from outlet when not in

use, before putting on or taking off parts, and before cleaning. To

unplug, grasp the plug and pull from the outlet. Never pull from

the power cord.

7. Avoid contact with moving parts.

8. Do not operate any appliance with a damaged supply cord or

plug, or after the appliance malfunctions or has been dropped

or damaged in any manner. Supply cord replacement and

repairs must be conducted by the manufacturer, its service

agent, or similarly qualified persons in order to avoid a hazard.

Call the provided customer service number for information on

examination, repair, or adjustment.

9. The use of attachments, including canning jars, not recommended

or sold by the appliance manufacturer may cause a risk of injury to

persons.

10. Do not use outdoors.

11. Do not let cord hang over edge of table or counter or touch hot

surfaces, including stove.

12. Do not place on or near a hot gas or electric burner, or in a heated

oven.

13. Keep hands and utensils, other than the tamper provided, out

of container while blending to reduce the risk of severe injury to

persons or damage to the blender. The cover must remain in place

when using the tamper through the cover opening. A scraper may

be used but must be used only when the blender is not running.

14. Blades are sharp; handle carefully—especially when assembling,

disassembling, or cleaning inside blender jar.

15. To reduce the risk of injury, never place cutting blade assembly on

base without jar properly attached.

16. Do not use a broken, chipped, or cracked blender jar.

17. Do not use broken, cracked, or loose cutting blade assembly.

18. Always operate blender with lid and filler-cap in place. Remove

filler-cap only for adding ingredients or to insert the tamper.

19. When blending hot liquids, remove filler-cap of two-piece lid or

open vent opening of lid with mess-free spout, and close any lid

openings along the edge intended for pouring. Hot liquids may

push lid off jar during blending. To prevent possible burns: Do not

fill blender jar beyond the 3-cup (710-ml) level. With the protection

of an oven mitt or thick towel, place one hand on top of lid. Keep

exposed skin away from lid. Start blending at lowest speed.

20. Ensure cutter assembly is tight and secure to jar. Injury can result

if moving blades accidentally become exposed.

21. If the jar should twist or rotate when the motor is switched ON,

switch OFF ( ) immediately and tighten jar in collar or on blender

base.

22. Do not leave blender unattended while it is operating.

SAVE THESE INSTRUCTIONS

Other Consumer Safety Information

This appliance is intended for household use only. Use for food or

liquids only.

w WARNING

Electrical Shock Hazard: This appliance is provided

with a grounded (3-prong) plug to reduce the risk of electric shock.

The plug fits only one way into a grounded outlet. Do not defeat

the safety purpose of the plug by modifying the plug in any way or

by using an adapter. If the plug does not fit into the outlet, have an

electrician replace the outlet.

The length of the cord used on this appliance was selected to reduce

the hazards of becoming tangled in or tripping over a longer cord.

If a longer cord is necessary, an approved extension cord may be

used. The electrical rating of the extension cord must be equal to

or greater than the rating of the appliance. The extension cord must

be a grounding-type, 3-wire cord. Care must be taken to arrange

the extension cord so that it will not drape over the countertop or

tabletop where it can be pulled on by children or accidentally tripped

over.

If the cutting blade assembly locks and will not move, it will damage

the motor. Do not use. Call the customer care center for information.

Do not place blender jar in the freezer filled with food or liquid. This

can result in damage to the cutting blade assembly, jar, blender, and

possibly result in personal injury.

NOTE: This machine is equipped with motor overload protection.

If the motor stops during operation due to overheating, unplug and

allow it to cool down for approximately 15 minutes. Plug machine

back in to resume normal operation.

The wattage/ampere rating of the blender is determined by an

Underwriters Laboratory test and is based on available cutting

blade assembly, jar combinations, and attachments that may not be

provided with your unit, but are available as replacement parts. This

is a measure of input wattage/amperes after 30 seconds of operation.

The blender as provided may draw significantly less power.

Peak power is the measure of the motor wattage during the first

seconds of operation. This is when a blender requires the most

power to crush ice, frozen fruit, etc. This is a better measure of what

a blender motor can consume when power is needed most.

Wattage/Peak Power Information

23. Check that the appliance is OFF ( ) before plugging cord into wall

outlet. To disconnect, turn the control to OFF ( ); then remove

plug from wall outlet. To unplug, grasp the plug and pull from the

outlet. Never pull from the power cord.

24. Do not use appliance for other than intended purpose.

25. CAUTION! In order to avoid a hazard due to inadvertent resetting

of the thermal cut-out, this appliance must not be supplied

through an external switching device, such as a timer, or

connected to a circuit that is regularly switched on and off by the

utility.

26. Ensure collar on base of blender jar and travel jar is tight and secure.

Injury can result if moving blades accidentally become exposed.

27. Do not blend hot liquids in the travel jar.

28. Be careful if hot liquid is poured into the blender container as it can

be ejected out of the appliance due to a sudden steaming.

Blender Jar

Parts and Features

BEFORE FIRST USE: After unpacking the blender, follow the instructions

in “Cleaning Your Blender.”

Base

Lid

Filler-Cap

Tamper

To order parts:

US: 1.800.851.8900

www.hamiltonbeach.com

Canada: 1.800.267.2826

Mexico: 800 71 16 100

Control Panel

OFF ( )

Quiet Shield*

Cutting

Blade

Assembly

Jar Pad

PULSE Button

START/STOP Button

Control Knob

Variable Speeds

Personal

Blender Jar

Removable

Collar

Removable

Cutting

Blade

Assembly

Twist-

On Lid

Personal Blender Jar

(optional accessory

on select models)

Parts and Features (cont.)

Quiet Shield: The quiet shield reduces the amount of noise from your

blender. When placed over the blender jar or the personal blender jar, it

muffles the sound that your blender produces.

Filler-Cap: The filler-cap has markings for easy measuring, to make fine

dressings and marinades. When filler-cap is removed, ingredients can

be added or the tamper may be inserted into the lid.

Lid: The lid is easy to put on, take off, and clean. Always use the lid and

the filler cap when the machine is in operation.

Tamper: The tamper mixes thick or frozen mixtures that cannot be

processed with regular blending. It prevents air pockets from forming

and is a handy tool when making nut butters.

Blender Jar: The durable jar is clearly marked with ounces, cups, and

milliliters.

Personal Blender Jar: The personal blender jar makes it easier to make

beverages on the go.

Twist-On Lid: When done blending in your personal blender jar,

remove the collar and cutting blade assembly and add the twist-on lid.

Cutting Blade Assembly: The cutting blade assembly is permanently

installed in the blender jar.

Jar Pad: Simply lift to remove the rubber pad for easy cleaning.

Control Buttons: Two buttons are located on top of the base. Use

START/STOP with any setting. Use PULSE with any variable speed.

Control Knob: Rotate knob to turn blender OFF ( ) and to select

desired blending mode: VARIABLE SPEEDS, SMOOTHIE, CRUSH,

PUREE, and CLEAN.

Variable Speeds: Select any speed for blending and pulsing by rotating

the control knob from 1 to 10.

Base: Contains the motor. DO NOT IMMERSE BASE IN WATER.

Motor Protection Device: The Hamilton Beach Professional Blender is

equipped with a motor overheating device. If the motor stops during

operation due to overheating, unplug and allow it to cool down for

about 15 minutes. Plug blender back in to resume normal operation.

Preparing the Blender: After unpacking the blender, wash everything

except blender base in hot, soapy water. Dry thoroughly. Wipe blender

base with a damp cloth or sponge. DO NOT IMMERSE BASE IN

WATER. Care should be taken when handling cutting blade assembly

since it is very sharp. Refer to care recommendations on page 17.

IMPORTANT: Blender jar and cutting blade assembly are subject to

wear during normal use. Always inspect jar for nicks, chips, or cracks.

Always inspect cutting blade assembly for broken, cracked, or loose

blades. If jar or cutting blade assembly is damaged, do not use. Call our

customer care center to obtain replacement parts.

Selecting Blender Settings: Select from four program settings or use

the variable speeds precise speed control.

w WARNING

PULSE

START

STOP

Burn Hazard. Metal parts under

blending jar get hot after use.

Do not touch.

Using Program Settings

Programs are optimized for recipe categories and vary in blending speed and duration. The blender automatically stops at the end of the

program. Some recipes may require more or less blending time.

Turn the control knob from

(OFF) to one of the following

programs: SMOOTHIE, CRUSH,

PUREE, or CLEAN.

Programs:

• SMOOTHIE – Blends frozen or fresh smoothies.

Blender pulses five times at the beginning to

chop ice or frozen ingredients and then ramps

up to run on high speed 10 for 60 seconds.

• CRUSH – Breaks ice into pieces small

enough for slushies or fine cocktails. Blender

continuously pulses from speed 1 to 5 for

1 minute.

• PUREE – Gives a smooth, creamy consistency

to pureed fruit or vegetables and a fine texture

when making powdered sugar. Blender slowly

ramps up from speed 1 to 10 for 1 minute

15 seconds.

• CLEAN – Add 2 cups (473 ml) warm water and

2 drops dish detergent to blender jar before

starting the program for easy cleaning. Filler-

cap should be kept in lid. Blender runs for

1 minute. Rinse and dry.

Fill by opening lid. Add

ingredients.

Place lid on jar.Place blender jar on base.

Place quiet shield over blender

jar assembly.

Using Program Settings (cont.)

FOR HOT LIQUIDS

w WARNING

Burn Hazard:

When blending hot liquids, do

not use quiet shield and remove

filler-cap of two-piece lid. To

prevent possible burns: Do

not exceed the 2-cup (473-ml)

level. Hot liquids may push off

two-piece lid during blending;

therefore, with the protection

of an oven mitt or thick towel,

place one hand on top of the lid,

keep exposed skin away from

the lid, and start blending at

lowest speed.

Press START/STOP.

Rotate control knob to (OFF).

Unplug.

Blender will automatically stop

at the end of the program. To

stop the blender at any time

during the program, press

START/STOP. If reactivated by

pressing START/STOP again,

the program will start at the

beginning.

8 10

Remove quiet shield from

blender jar assembly.

w WARNING

Burn Hazard:

Metal parts under blending jar get

hot after use. Do not touch.

Remove lid.

Using Variable Speed

Rotate control knob clockwise.

Always start at speed 1 and

adjust to a higher speed after

starting blender.

Fill by opening lid. Add

ingredients.

Place quiet shield over blender

jar assembly.

Press START/STOP.

Plug in blender. Place blender jar on base.

Place lid on jar.

Using Variable Speed (cont.)

Press START/STOP at any time

to stop the blender.

FOR HOT LIQUIDS

w WARNING

Burn Hazard:

When blending hot liquids, do

not use quiet shield and remove

filler-cap of two-piece lid. To

prevent possible burns: Do

not exceed the 2-cup (473-ml)

level. Hot liquids may push off

two-piece lid during blending;

therefore, with the protection

of an oven mitt or thick towel,

place one hand on top of the lid,

keep exposed skin away from

the lid, and start blending at

lowest speed.

Rotate control knob to (OFF).

Unplug.

12 1311

w WARNING

Burn Hazard:

Metal parts under blending jar get

hot after use. Do not touch.

Remove lid.

Remove quiet shield from

blender jar assembly.

Using Pulse Setting

PULSE can be used with variable speeds to control chopping action or to encourage mixing of ingredients.

Rotate control knob clockwise to

select pulse speed. Always start

at speed 1 and adjust to a higher

speed after starting to pulse.

Fill by opening lid. Add

ingredients.

Place lid on jar.

Press PULSE button. Increase PULSE speed by rotating the control

knob clockwise. To increase speed at the same time as pulsing,

press and hold PULSE button.

Place blender jar on base.

Plug in blender.

Place quiet shield over blender

jar assembly.

FOR HOT LIQUIDS

w WARNING

Burn Hazard:

When blending hot liquids, do

not use quiet shield and remove

filler-cap of two-piece lid. To

prevent possible burns: Do

not exceed the 2-cup (473-ml)

level. Hot liquids may push off

two-piece lid during blending;

therefore, with the protection

of an oven mitt or thick towel,

place one hand on top of the lid,

keep exposed skin away from

the lid, and start blending at

lowest speed.

Using Pulse Setting (cont.)

Hold down the PULSE button for

the desired time.

12 14

Rotate control knob to (OFF).

Unplug.

w WARNING

Burn Hazard:

Metal parts under blending jar get

hot after use. Do not touch.

Remove lid.

Remove quiet shield from

blender jar assembly.

Tamper Tips:

• Blender jar should not be more than two-thirds full when the tamper is

used during blending.

• Do not use tamper with hot liquids.

Tips to Prevent Overheating:

• Do not process recipes at lower speeds or higher speeds than

recommended.

• Do not process recipes longer than recommended.

• Use tamper to process thicker mixtures and keep ingredients moving

around and through the blades.

Blender Tips:

• To add foods when blender is operating, remove filler-cap and add

ingredients through the hole in lid.

• For best performance, the minimum amount of liquid needed per recipe

is one cup (8 ounces/237 ml). Add more liquid if food is not blending

satisfactorily.

• If blending action stops during blending or ingredients stick to sides of the

jar, insert tamper to help move the mixture around or add more liquid to

the blender jar.

• Do not store food or liquids in the blender jar.

• Avoid bumping or dropping the blender when in operation or at any time.

• Cutting large whole fruits and vegetables may blend more quickly.

• Do not fill blender jar past highest graduation marking.

Using the Tamper

Remove quiet shield from

blender jar assembly. Remove

filler-cap.

3 4

Insert tamper into hole in lid. Place one hand on top of the lid and

use the tamper to move thick mixtures around in blender jar. Point

the tamper toward the sides or corners of the container. Do not

try to force the tamper deeper into the container and closer to the

blades.

Rotate control knob to (OFF)

before using tamper.

The tamper is a optional tool to help blend very thick and/or frozen mixtures. Use the tamper to remove trapped air bubbles if mixture

stops circulating, or to move ingredients from jar corners into the blade. ONLY use the tamper with the jar lid in place.

Using the Personal Blender Jar

(Optional Accessory on Select Models)

Add ingredients to personal

blender jar.

w WARNING

Burn Hazard.

Do not blend hot ingredients. Pressure may build,

causing jar to pop off and hot ingredients to erupt.

w CAUTION

Cut Hazard.

Handle blades carefully; they are very sharp. Make

sure unit is turned OFF ( ) and is unplugged.

Press START and slowly

rotate the VARIABLE SPEED

DIAL to the right or left during

blending to increase or decrease

blending speed, or press the

PULSE button to blend 15 to 30

seconds or until smooth. Always

operate on a countertop or other

supporting surface.

2 3

Turn personal blender jar upside

down. Place onto base.

Carefully place the removable

collar with cutting blade

assembly onto jar.

Use a program setting.

Place quiet shield over jar

assembly. If not using the quiet

shield, hold jar in place while

blending. Plug in blender.

Using the Personal Blender Jar (cont.)

(Optional Accessory on Select Models)

6 7

Turn bottom up; remove collar

and cutting blade assembly from

jar.

Hand-tighten drinking lid onto

personal blender jar.

Blending Tips for the 20-oz. Personal Blender Jar

• For best performance in the 20-oz. personal blender jar, the

minimum amount of liquid needed per recipe is 3/4 cup

(6 ounces/177 ml).

• Do not chop or process hard foods such as cheese, crackers, or

meat.

• If blending action stops during blending or ingredients stick to sides

of the jar, turn blender OFF ( ). Remove jar, collar, and blade and

use a narrow rubber spatula to stir.

• Do not process hot foods or liquids in personal blender jar.

• Avoid bumping or dropping the blender jar.

• If blender stops working, unplug and allow 15 minutes before

using. Plug into outlet to start blending.

• For blending protein powder drinks, blend less than 16 oz. (473 ml)

since protein powders expand during blending.

Rotate control knob to (OFF).

Unplug. Remove quiet shield

from personal blender jar

assembly.

Recipes

Tomatillo Salsa

Ingredients:

4 medium tomatillos, husked and quartered

1 small onion, quartered

1 small jalapeno, halved

1 clove garlic

1/2 teaspoon (2.5 ml) salt

3 sprigs cilantro

Directions:

1. Place ingredients into the blender jar in the order listed.

2. Process on Speed 10 until blended.

3. Garnish with additional cilantro and serve as a sauce or with tortilla

chips.

Serves: 6 to 8

Strawberry Margarita

Ingredients:

3/4 cup (177 ml) chopped strawberries

1 tablespoon (15 ml) sugar

2 tablespoons (30 ml) lime juice

5 tablespoons (74 ml) tequila

2 tablespoons (30 ml) triple sec

1 cup (237 ml) ice cubes

Directions:

1. Place ingredients into the blender jar in the order listed.

2. Blend on CRUSH until blended.

3. Rub the rims of glasses with a wedge of lime. Dip in a dish of

kosher salt or sugar. Pour in margarita.

Serves: 2 to 3

Traditional Basil Pesto

Ingredients:

2 cups (473 ml) fresh basil leaves

1/2 cup (118 ml) pine nuts

2 garlic cloves

1/2 cup (118 ml) olive oil

1/2 cup (118 ml) grated Parmesan cheese

1/4 teaspoon (1.3 ml) salt

Directions:

1. Place ingredients into the blender jar in the order listed.

2. Select SPEED 5 and PULSE 2–3 times.

3. Press START and gradually increase the speed to SPEED 10,

blending until smooth, 30–45 seconds.

Makes: 1 1/4 cups

Test Kitchen Tip: Divide Traditional Basil Pesto sauce between

two ice cube trays; cover with plastic wrap and freeze. When the

pesto sauce is frozen solid, pop the pesto cubes out and place in

a resealable plastic freezer bag. Remove pesto cubes from bag as

needed. For an individual serving, defrost one pesto cube and toss

with hot cooked pasta or spread on your favorite sandwich or wrap.

For more great tips on using basil, visit our Everyday Good Thinking

Blog, Food Focus: Basil.

Recipes (cont.)

Creamy Caesar Dressing

Ingredients:

3 anchovies

1 clove garlic

2 tablespoons (30 ml) lemon juice

1 teaspoon (5 ml) Dijon mustard

1 teaspoon (5 ml) Worcestershire sauce

1/2 teaspoon (2.5 ml) cracked black pepper

1/2 cup (118 ml) mayonnaise

1/2 cup (118 ml) grated Parmesan cheese

1/3 cup (79 ml) olive oil

Directions:

1. Place anchovies, garlic, lemon juice, mustard, Worcestershire

sauce and black pepper in blender jar.

2. Select SPEED 5 and PULSE 2–3 times until mixture is creamy.

3. Add mayonnaise, Parmesan cheese and oil to blender. Select

SPEED 3 and PULSE 2–3 times until smooth.

4. Refrigerate.

Makes: 1 1/4 cups

Test Kitchen Tip: For thinner dressing add water, 1 tablespoon

(15 ml) at a time, until desired consistency is reached.

Triple Berry Smoothie

Ingredients:

1/2 cup (118 ml) cranberry-raspberry juice

4 ounces (113 g) fresh strawberries, hulled and quartered

(3/4 cup [177 ml])

3 ounces (85 g) fresh raspberries (2/3 cup [158 ml])

2 ounces (57 g) fresh blueberries (1/3 cup [79 ml])

1 small ripe banana, cut into large chunks

1/2 cup (118 ml) vanilla yogurt

6 ice cubes

Directions:

1. Place ingredients into the blender jar in the order listed.

2. Select SPEED 5 and PULSE 2–3 times.

3. Press START and gradually increase the speed to SPEED 10,

blending until smooth, 30–45 seconds.

Serves: 1 to 2

Test Kitchen Tip: Try different combinations of fresh berries and juice

to make new flavors of smoothies.

Cleaning Your Blender

w WARNING

Electrical Shock Hazard.

Disconnect power before cleaning. Do not immerse cord, plug,

base, or motor in water or other liquid.

321

After blending, add 1 cup

(237 ml) warm water and 1 drop

dishwasher liquid to jar. Blend

on CLEAN program. Rinse and

dry immediately. For a more

thorough cleaning, sprinkle

2 tablespoons (30 ml) baking

soda in blender. Add 1/2 cup

(118 ml) white vinegar. Mixture

will bubble. When bubbling

subsides, add 1 cup (237 ml)

water and blend on the CLEAN

cycle. Wash any remaining

residue with dish soap and water.

Rinse and dry.

Unplug cord. Remove quiet shield from

blender jar assembly.

Remove lid.

Lift blender jar assembly off the

base.

Remove quiet shield from

personal blender jar assembly.

5 3

DISHWASHER-SAFE

DO NOT use the “SANI” setting

when washing in the dishwasher.

“SANI” cycle temperatures could

damage your product.

Wipe blender base, control panel,

and cord with a damp cloth or

sponge. To remove stubborn

spots, use a mild, nonabrasive

cleanser.

Wash all removable parts in

hot, soapy water. Rinse and dry

to maintain appearance. Care

should be taken when handling

the cutting blade assembly since

it is very sharp.

Cleaning Your Blender (cont.)

PROBLEM PROBABLE CAUSE/SOLUTION

Blender fails to start. • Make sure control knob is not in the (OFF) position.

• Check to see if the unit is securely plugged into an electrical outlet of proper voltage and frequency.

• Check to see if fuse for electrical outlet has blown or if circuit breaker has tripped.

Unit does not respond to

button commands.

• Turn power off and back on using control knob to reset controls.

• If unit does not respond, call our customer care center at 1.800.851.8900 in the U.S. or 1.800.267.2826 in

Canada.

Blender smells like it is

burning.

• Turn unit to (OFF) and allow to cool.

• Although motors are tested during the manufacturing process, heavy use may cause curing of motor

windings. The smell may quickly dissipate after a few heavy uses.

• If smell continues after additional heavy uses, call our customer care center at 1.800.851.8900 in the U.S.

or 1.800.267.2826 in Canada.

There is grease around the

bottom of the blender jar or

on the counter top.

• Monitor the problem and source. This may indicate an issue with the jar bearings.

• Call our customer care center at 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada if the condition

persists.

Blender jar is cloudy or

stained. How can I clean it?

• Some cloudiness may be natural after use. The minerals from fruits, produce, and leafy greens, in addition

to the oils of various nut butters, can sometimes cause a film on the blender jar.

• Sprinkle 2 tablespoons (30 ml) baking soda in blender. Add 1/2 cup (118 ml) white vinegar. Mixture will

bubble. When bubbling subsides, add 1 cup (237 ml) water and blend on the CLEAN cycle. Wash any

remaining residue with dish soap and water. Rinse and dry thoroughly.

Troubleshooting

Hamilton Beach 5-Year Limited Warranty

This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and

is in lieu of any other warranty or condition.

This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of original

purchase. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective,

at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or

component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal

or greater value.

This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to

the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or

gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the

product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the

rating label (e.g., 120V ~ 60 Hz).

We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All

liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition

of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such

warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have

other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or

special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

To make a warranty claim, do not return this appliance to the store. Please call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada

or visit hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster service, locate the model, type, and series numbers

on your appliance.

Hamilton Beach Brands, Inc.

4421 Waterfront Drive

Glen Allen

Virginia 23060

USA

La page charge ...

Hamilton Beach 58870 Mode d'emploi

Marque: Hamilton Beach

Modèle: 58870

Catégorie: Mélangeurs

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

español: Hamilton Beach 58870 Guía del usuario
português: Hamilton Beach 58870 Guia de usuario

Hamilton Beach 58870 Mode d'emploi

Hamilton Beach 58870 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents