Moog Videolarm Liberty SERIES Mode d'emploi

Marque: Moog Videolarm

Modèle: Liberty SERIES

Catégorie: Accessoires de caméra de sécurité

Taper: Mode d'emploi

Ce manuel convient également à

www.moogvideolarm.com

L i b e r t y ™ S e r i e s

Cellular & WiFi Enabled Camera Enclosure

Installation and Operation Instructions for the following models:

LDW75CLG  LibertySerieswirelessIPReadydome.Includecellularrouter,powersupply

  forthecompletesystem.Cellularbroadbandadaptersoldseparately.

  110/220VACinput.DesignedtoworkwithMoogVideolarmIPReadySeries 

  ofIPcamerahousings

Beforeattemptingtoconnectoroperatethisproduct,pleasereadtheseinstructionscompletely.

W81-IN5453

08-02-2012

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualified installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the

unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including amplifiers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specified by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the

integrity of the installation is intact. Failure to comply with the foregoing could result in the

unit separating from the support structure and falling, with resultant damages or injury to

anyone or anything struck by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make

future shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us

at the following number:

The lightning flash with an arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of non-insulated “dangerous voltage”

within the product’s enclosure that may be

of sufficient magnitude to constitute a risk

to persons.

Este símbolo se piensa para alertar al usuario a la

presencia del “voltaje peligroso no-aisIado” dentro del

recinto de los productos que puede ser un riesgo de

choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la

presence “de la tension dangereuse” non-isolée dans la

clôture de produits qui peut être un risque de choc

électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença

“di tensão perigosa non-isolada” dentro do cerco dos

produtos que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla

presenza “di tensione pericolosa” non-isolata all’interno

della recinzione dei prodotti che può essere un rischio di

scossa elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones

importantes en la literatura que acompaña la

aplicación.

Ce symbole de point d’exclamation est prévu pour

alerter l’utilisateur à la presence des instructions

importantes dans la littérature accompagnant

l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der

Literatur alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido

alertar o usuário à presença de instruções importantes

na literatura que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti

nella letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING TO

QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

LDW75CLG

120/240 VAC 50/60Hrz.

96 Watts

Accessories: Heater: 50 Watts, Blower: 2 Watt

Camera Power: (See Camera Specifications): 40 Watts Max

120/240VAC 50/60Hrz.

96 Vatios

De Accesorios: Calentador: 50 Watts, Blower: 2 Vatio

Energía De la Cámara fotográfica De : (Véase Las

Especificaciones De la Cámara fotográfica): 40 Vatios

De Herramientas Máximas

120/240VCA 50/60Hrz.

96 Watts

D'Accessoires : Réchauffeur : 50 Watts, Ventilateur : 2 watts.

Puissance D'Appareil-photo : (Voir Les Caractéristiques

D'Appareil-photo) : 40 Watts De Maximum

120/240VAC 50/60Hrz.

96 Watt

Zusatzgerät-: Heizung: 50 Watts, Blower: 2

Watt-Kamera-Energie: (Sehen Sie Kamera-Spezifikationen):

40 Watt Maximale

120/240VAC 50/60Hrz.

96 Watts

De Acessórios: Calefator: 50 Watts, Blower: 2 Watt

Poder Da Câmera De : (Veja Especificações Da Câmera):

40 Watts De Ferramentas Máximas

120/240VCA 50/60Hrz.

96 Watt

Di Accessori: Riscaldatore: 50 Watts, Blower: 2 Watt

Alimentazione Della Macchina fotografica Da :

(Veda Le Specifiche Della Macchina fotografica): 40 Watt

Di Attrezzi Massimi

Electrical Specifications

Français

Deutsch

Italiano

Portuguese

Español

English

Content of Box

LIQUID TIGHT PLUG FOR

3G ANTENNA BULKHEAD

CONNECTOR HOLE.

LIQUID TIGHT PLUG FOR

OPTIONAL MAIN

POWER HOLE.

LIQUID TIGHT PLUG FOR

OPTIONAL MAIN

POWER HOLE.

LIQUID TIGHT

STRAIN RELIEF

FOR MAIN POWER HOLE.

Power Feed Locations:

Use the steel straps to mount the unit to a pole.

• Utilice las correas de acero para montar la unidad al

poste.

• Employez les courroies en acier pour monter l'unité au

poteau.

• Benutzen Sie die Stahlbügel, um die Maßeinheit zum

Pfosten anzubringen.

• Use as cintas de aço para montar a unidade ao pólo.

• Usi le cinghie d'acciaio per montare l'unità al palo.

Place the housing onto the bracket, secure by

using the provided 2 (M10) bolts and washers.

• Coloque la cubierta sobre el soporte, seguro usando

los 2 pernos (M10) y arandelas proporcionados.

• Placez le logement sur la parenthèse, bloquée en

employant les 2 boulons (M10) et rondelles fournis.

• Setzen Sie das Gehäuse auf dem Haltewinkel, der indem

Sie die zur Verfügung gestellten 2 sicher ist, Schraubbolzen

(M10) und die Unterlegscheiben verwenden.

• Coloc a carcaça no suporte, seguro usando os 2

parafusos (M10) e arruelas fornecidos.

• Disponga l'alloggiamento sulla staffa, sicura usando i 2

bulloni (M10) e rondelle forniti.

LDW75CLG unit is ready to mount. Use marked

holes to attach steel straps.

• La unidad de LDW75CLG está lista para montar. Utilice

los agujeros marcados para atar las correas de acero.

• L'unité de LDW75CLG est prête à monter. Employez les

trous marqués pour attacher les courroies en acier.

• LDW75CLG Maßeinheit ist bereit anzubringen. Benutzen

Sie markierte Löcher, um Stahlbügel anzubringen.

• A unidade de LDW75CLG está pronta para montar.

Use furos marcados para unir as cintas de aço.

• L'unità di LDW75CLG è pronta a montare. Usi i profondi

fori per attaccare le cinghie d'acciaio.

Holes for

steel straps

Attach pole mount clips to bracket as shown, using

hardware provided.

• Ate los clips del montaje del poste para acorchetar como

se muestra, usando el hardware proporcionado.

• Attachez les agrafes de bâti de poteau à la parenthèse

comme montré, utilisant le matériel fourni.

• Bringen Sie Pfosteneinfassungsclips an, um wie gezeigt

einzuklammern, unter Verwendung der bereitgestellten Hardware.

• Una grampos da montagem do pólo ao suporte como mostrado,

usando a ferragem fornecida.

• Attacchi le clip del supporto del palo alla staffa come indicato,

per mezzo dei fissaggi forniti.

1 2

POLE MOUNTING

Tilt the unit to align the grooves (holes) to the

lips on the bracket.

• Incline la unidad para alinear los surcos (agujeros) con

los labios en el soporte.

• Inclinez l'unité pour aligner les cannelures (trous) sur les

lèvres sur la parenthèse.

• Kippen Sie die Maßeinheit, um die Nuten (Löcher) mit

den Lippen am Haltewinkel auszurichten.

• Incline a unidade para alinhar os sulcos (furos) aos

bordos no suporte.

• Inclini l'unità per allineare le scanalature (fori) alle

labbra sulla staffa.

Shows the wall mount option of hanging unit

and where to secure the bolt.

• Demuestra la opción del montaje de la pared de la

unidad colgante y donde asegurar el perno.

• Montre l'option de bâti de mur de l'unité accrochante

et où fixer le boulon.

• Zeigt die Wandeinfassungswahl der hängenden

Maßeinheit und wo man den Schraubbolzen sichert.

• Mostra a opção da montagem da parede da unidade

de suspensão e onde fixar o parafuso.

• Mostra l'opzione del supporto della parete dell'unità

d'attaccatura e dove assicurare il bullone.

Bolts/Washers

Affix the wall mount bracket to the surface

of the wall as shown.

• Ponga el soporte del montaje de la pared a la

superficie de la pared como se muestra.

• Apposez la parenthèse de bâti de mur sur la surface

du mur comme montrée.

• Fügen Sie den Wandeinfassungshaltewinkel zur

Oberfläche der Wand wie gezeigt hinzu.

• Afixe o suporte da montagem da parede à superfície

da parede como mostrada.

• Affiggi la staffa del supporto della parete alla superficie

della parete come indicata.

Slide the tilted unit over the lips to lock it into

place.

• Deslice la unidad inclinada sobre los labios para

trabarla en lugar.

• Glissez l'unité inclinée au-dessus des lèvres pour la

fermer à clef sur l'endroit.

• Schieben Sie die gekippte Maßeinheit über den Lippen,

um sie in Platz zu verriegeln.

• Deslize a unidade inclinada sobre os bordos para

travá-la no lugar.

• Faccia scorrere l'unità inclinata sopra le labbra per

chiuderlo a chiave nel posto.

WALL MOUNTING

To install a camera or for the maintenance of the

unit (if needed) you should flip so that the dome is

facing upwards.

• Para instalar una cámara o para el mantenimiento de la unidad (si es

necesario) que usted debe mover de un tirón de modo que la bóveda

esté haciendo frente hacia arriba.

• Pour installer un appareil-photo ou pour l'entretien de l'unité (si nécessaire)

que vous devriez renverser de sorte que le dôme fasse face vers le haut.

• Zu eine Kamera oder für die Wartung der Maßeinheit anbringen

(wenn erforderlich), das Sie leicht schlagen sollten, damit die

Haube aufwärts gegenüberstellt.

• Para instalar uma câmera ou para a manutenção da unidade

(se necessário) que você deve lanç de modo que a abóbada

esteja enfrentando para cima.

• Per per installare una macchina fotografica o per il mantenimento

dell'unità (se necessario) che dovreste lanciare in modo che la cupola

stia affrontando verso l'alto.

Bolts /washers

Complete the necessary electrical wiring. Use the provided

bolts and washers to secure the housing in place.

• Termine el cableado eléctrico necesario. Utilice los pernos y las

arandelas proporcionados para asegurar la cubierta en el lugar.

• Accomplissez le câblage électrique nécessaire. Employez les boulons

et les rondelles fournis pour fixer le logement en place.

• Schließen Sie die notwendige elektrische Verdrahtung ab. Benutzen Sie

die zur Verfügung gestellten Schraubbolzen und die Unterlegscheiben,

um das Gehäuse an der richtigen Stelle zu sichern.

• Termine a fiação elétrica necessária. Use os parafusos e as arruelas

fornecidos para fixar a carcaça no lugar.

• Completi i collegamenti elettrici necessari. Usi i bulloni e le rondelle

forniti per fissare l'alloggiamento sul posto.

Shows the unit mounted to the wall.

• Demuestra la unidad montada a la pared.

• Montre l'unité montée au mur.

• Zeigt die Maßeinheit, die zur Wand angebracht wird.

• Mostra a unidade montada à parede.

• Mostra l'unità montata alla parete.

Remove the dome and follow the specified

camera mounting options.

• Quite la bóveda y siga las opciones especificadas del

montaje de la cámara.

• Enlevez le dôme et suivez les options spécifiques de

support d'appareil-photo.

• Entfernen Sie die Haube und folgen Sie den spezifi-

zierten Kameramontagewahlen.

• Remova a abóbada e siga as opções especific da

montagem da câmera.

• Rimuova la cupola e segua le opzioni specificate del

montaggio della macchina fotografica.

1. Move the 115//240VAC selector switch (3) to the desired position

2. Insure that the ON/OFF switch (2) is in the off position

3. Attach the in coming “main” power to the 120/240 VAC input

4. Move the ON/OFF switch (2) to the ON position.

• 1. Mueva el interruptor de selector 115//240VAC (3) a la posición deseada 2. Asegure que el

interruptor CON./DESC. (2) está en la posición de reposo 3. Ate en energía “principal” que viene a

la entrada de 120/240 VAC 4. Mueva el interruptor CON./DESC. (2) a la posición de trabajo.

• 1. Déplacez le sélecteur 115//240VAC (3) à la position désirée 2. Assurez-vous que le commutateur

"MARCHE/ARRÊT" (2) est dans la position de repos 3. Attachez dans la prochaine puissance «

principale » à l'entrée de 120/240 VCA 4. Déplacez le commutateur "MARCHE/ARRÊT" (2) à la

position de fonctionnement.

• 1. Verschieben Sie den Schalter des Wähl 115//240VAC (3) auf die gewünschte Position 2.

Versichern Sie, dass der Ein/Aus-Schalter (2) in der Ausschaltstellung ist 3. Bringen Sie in kommender

„Haupt“ Energie zum 120/240 VAC-Eingang an 4. Verschieben Sie den Ein/Aus-Schalter (2) auf die

Arbeitsstellung.

• 1. Mova o interruptor de seletor 115//240VAC (3) para a posição desejada 2. Segure que o

interruptor DE LIGAR/DESLIGAR (2) está no posição de repouso 3. Una no poder “principal” de

vinda à entrada de 120/240 de VAC 4. Mova o interruptor DE LIGAR/DESLIGAR (2) para o posição

de functionamento.

• 1. Sposti l'interruttore di selettore 115//240VAC (3) alla posizione voluta 2. Assicuri che l'interruttore

acceso/spento (2) è nella posizione di riposo 3. Attacchi nel potere “principale„ venente all'input

da 120/240 di VCA 4. Sposti l'interruttore acceso/spento (2) alla posizione di funzionamento.

24VAC

Aux. output

120/240VAC

Aux. output

Remove barrier cover.

• Quite la cubierta de la barrera.

• Enlevez la couverture de barrière.

• Entfernen Sie Sperrenabdeckung.

• Remova a tampa da barreira.

• Rimuova la copertura della barriera.

Remove

barrier

cover

Top inside view of the unit.

• Tapa dentro de la vista de la unidad.

• Dessus à l'intérieur de la vue de l'unité.

• Oberseite innerhalb der Ansicht der Maßeinheit.

• Parte superior dentro da ideia da unidade.

• Parte superiore all'interno della vista dell'unità.

To open the top cover unlock the latches.

From here you can activate the unit

• Para abrir la cubierta superior abra los cierres. Aquí de

usted puede activar la unidad.

• Pour ouvrir la couverture supérieure ouvrez les verrous.

D'ici vous pouvez activer l'unité.

• Um die obere Abdeckung zu öffnen entriegeln Sie die

Verriegelungen. Von hier Ihnen kann die Maßeinheit

aktivieren.

• Para abrir a tampa superior destrave as travas. Aqui

de você pode ativar a unidade.

• Per aprire la copertura superiore sblocchi i fermi. Di

qui potete attivare l'unità.

Assign your camera the static TCP/IP address of

192.168.1.50 with a subnet mask of 255.255.255.0 and a

gateway of 192.168.1.1.

• Asigne a su cámara la dirección estática del TCP/IP de 192.168.1.50 con

un subnet mask de 255.255.255.0 y una entrada de 192.168.1.1.

• Assignez à votre appareil-photo l'adresse statique de TCP/IP de

192.168.1.50 avec un subnet mask de 255.255.255.0 et un passage de

192.168.1.1.

• Weisen Sie Ihrer Kamera die statische IP-Adresse von 192.168.1.50 mit

einem subnet mask von 255.255.255.0 und einem Zugang von

192.168.1.1 zu.

• Atribua a sua câmera o endereço de estática do TCP/IP de 192.168.1.50

com um subnet mask de 255.255.255.0 e uma passagem de 192.168.1.1.

• Assegni alla vostra macchina fotografica l'indirizzo statico del TCP/IP di

192.168.1.50 con un subnet mask di 255.255.255.0 e un ingresso di

192.168.1.1.

3G/4G Camera Prep

Connect to your camera with a laptop or pc

• Conecte con su cámara con un ordenador portátil o

una PC.

• Reliez à votre appareil-photo à un ordinateur portable

ou à un PC.

• Schließen Sie an Ihre Kamera an einen Laptop oder an

einen PC an.

• Conecte a sua câmera com um portátil ou um PC.

• Colleghi alla vostra macchina fotografica con un

computer portatile o un pc.

17 18

For use with the analog pan/tilt camera systems

POWER

1 Camera Power (24Vac) Red

2 Camera Power (24Vac) Orange

3 Accessory Power (24Vac) Yellow

4 Accessory Power (24Vac) Green

CONTROL

1 RS-485RXA Blue

2 RS-485RXB Violet

3 RS-485TXA Gray

4 RS-485TXB White

16B

Some users may require WiFi access to the unit as well. Connect to the WiFi

network by selecting the SSID that contains the word Videolarm and a

combination of three letters and numbers. An example is Videolarm2A0 as

shown above. The encryption key for the network is password.

• Algunos usuarios pueden requerir el acceso de WiFi a la unidad también. Conecte con la red de

WiFi seleccionando el SSID que contiene la palabra Videolarm y una combinación de tres letras y

números. Un ejemplo es Videolarm2A0 como se muestra arriba. La llave de encripción para la red

es contraseña.

• Quelques utilisateurs peuvent avoir besoin de l'accès de WiFi à l'unité aussi bien. Reliez au réseau de

WiFi en choisissant le SSID qui contient le mot Videolarm et une combinaison de trois lettres et

nombres. Un exemple est Videolarm2A0 comme montré ci-dessus. La clef de chiffrage pour le

réseau est mot de passe.

• Einige Benutzer können WiFi Zugang zur Maßeinheit außerdem fordern. Schließen Sie an das WiFi

Netz an, indem Sie das SSID vorwählen, das das Wort Videolarm und eine Kombination von drei

Buchstaben und von Zahlen enthält. Ein Beispiel ist Videolarm2A0 wie gezeigt oben. Der

Verschlüsselungschlüssel für das Netz ist Kennwort.

• Alguns usuários podem exigir o acesso de WiFi à unidade também. Conecte à rede de WiFi

selecionando o SSID que contem a palavra Videolarm e uma combinação de três letras e

números. Um exemplo é Videolarm2A0 como mostrado acima. A chave de cifragem para a rede

é senha.

• Alcuni utenti possono richiedere l'accesso di WiFi all'unità pure. Colleghi alla rete di WiFi

selezionando lo SSID che contiene la parola Videolarm e una combinazione di tre lettere e numeri.

Un esempio è Videolarm2A0 come indicato sopra. La chiave di crittografia per la rete è parola

d'accesso.

Change to HTTP port from the default port 80 to

the port 12345.

• Cambie al puerto del HTTP del puerto 80 del defecto al puerto 12345.

• Changez en le port de HTTP du port 80 de défaut en port 12345.

• Ändern Sie zum HTTP-Hafen vom Rückstellungshafen 80 zum Hafen

12345.

• Mude ao porto do HTTP do porto 80 do defeito ao porto 12345.

• Cambi all'orificio del HTTP dall'orificio 80 di difetto all'orificio 12345.

USB 3G/4G Card Prep

When ordering your service with your provider, have

them add a static ip address to the service <extra

charge may be involved>

• Al pedir su servicio con su abastecedor, haga que agreguen un IP

address estático al servicio (el recargo puede estar implicado).

• En commandant votre service avec votre fournisseur, faites-ajouter les

un IP address statique au service (le supplément peut être impliqué).

• Wenn Sie Ihren Service mit Ihrem Versorger bestellen, lassen Sie sie ein

statisches IP address dem Service hinzufügen (Extragebühr kann

beteiligt sein) .

• Ao requisitar seu serviço com seu fornecedor, mande-os adicionar um

IP address de estática ao serviço (a sobretaxa pode ser involvida.

• Nell'ordinare il vostro servizio con il vostro fornitore, facciali aggiungere

un IP address statico al servizio (la carica supplementare può essere

implicata).

19 20

Connecting to the WiFI network allows a connection to the admin interface

on the address http://192.168.1.1 as well as local access to the camera on

address http://192.168.1.50:12345. The username for the admin interace is

root with a password of admin.

• La conexión con la red de WiFI permite una conexión al interfaz del admin en la dirección

http://192.168.1.1 así como el acceso local a la cámara en la dirección http://192.168.1.50:12345.

El username para el interace del admin es raíz con una contraseña del admin.

• Se relier au réseau de WiFI permet un raccordement à l'interface d'admin sur l'adresse

http://192.168.1.1 aussi bien que l'accès local à l'appareil-photo sur l'adresse

http://192.168.1.50:12345. L'username pour l'interace d'admin est racine avec un mot de passe

d'admin.

• Die Verbindung an das WiFI Netz erlaubt einen Anschluss zur admin-Schnittstelle auf der Adresse

http://192.168.1.1 sowie lokalen Zugang zur Kamera auf Adresse http://192.168.1.50:12345. Das

username für das admin interace ist Wurzel mit einem Kennwort von admin.

• Conectar à rede de WiFI permite uma conexão à relação do admin no endereço

http://192.168.1.1 assim como o acesso local à câmera no endereço http://192.168.1.50:12345. O

username para o interace do admin é raiz com uma senha do admin.

• Collegandosi alla rete di WiFI permette un collegamento all'interfaccia di admin sull'indirizzo

http://192.168.1.1 così come accesso locale alla macchina fotografica sull'indirizzo

http://192.168.1.50:12345. Il username per il interace di admin è radice con una parola d'accesso

del admin.

Use the provided velcro to mount and secure

the USB modem. On applicable models only.

• Utilice el velcro proporcionado para montar y para asegurar el

módem del USB. En modelos aplicables solamente.

• Employez le Velcro fourni pour monter et fixer le modem d'USB.

Sur les modèles applicables seulement.

• Benutzen Sie den zur Verfügung gestellten Flausch, um das

USB-Modem anzubringen und zu sichern. Auf nur anwendbaren

Modellen.

• Use o velcro fornecido para montar e fixar o modem do USB. Em

modelos aplicáveis somente.

• Usi il velcro fornito per montare e fissare il modem del USB. Sui

modelli applicabili soltanto.

Advanced configuration options for changing the WiFI settings, etc. are

available through the admin interface.

• Las opciones de configuración avanzadas para cambiar los ajustes de WiFI, el etc. están

disponibles a través del interfaz del admin.

• Les options de configuration avancées pour changer les arrangements de WiFI, etc. sont

disponibles par l'interface d'admin.

• Vorgerückte Konfigurationswahlen für das Ändern der WiFI Einstellungen, des etc. sind durch die

admin-Schnittstelle vorhanden.

• As opções de configuração avançadas para mudar os ajustes de WiFI, etc. estão disponíveis

através da relação do admin.

• Le opzioni di configurazione avanzate per il cambiamento le regolazioni di WiFI, ecc. sono

disponibili attraverso l'interfaccia di admin.

23 24

Replacement Parts

Liberty Series

LDW75CLG

PART # DESCRIPTION

1 RP40VL3707 TOP COVER ASSEMBLY

RPLBHNG

TOP COVER HINGES, LEFT&RIGHT

RP30VL3708

HINGE PLATE

4 RP96GK3710 TOP COVER GASKET

5 RP70VL3727 BOARD SHIELD

6 RP76VL2007 4G POWER & CONNECTION BOARD ASSEMBLY

7 RP96SJ355012 1/2" BLACK DUAL LOCK FASTENER WITH VHB TAPE

8 RP70TRANS12 REPLACEMENT TRANSFORMER 96 VA

9 RP30VL3712 ANTENNA BRACKET

10 RP76RCNEX1 NEXTARA MOBLE ROUTING BOARD

RP30VL3701 WALL MOUNT BRACKET

RP30VL2742 POLE MOUNT CLIPS

RP954GLTCH LATCHE SIERRA 210-120SS

RP71VLBL03 FUSION DOME BLOWER 40X40X10MM, 1.0 WATT, ROHS

RP70LF3VR3 120/240V 50-60Hz LINE FILTER

RP70SPPA405 15A PARALLEL SURGE PROTECTOR

RP40BR3510 FD7 MAIN CAMERA BRACKET ASSEMBLY

RP25DCR73000 CLEAR DOME, WHITE TRIMRING, R7 STYLE

Product Registration/Warranty

Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest

quality products available and superior customer service.

Should a problem arise, rest assured that Moog Videolarm stands behind its products by offering impressive 3 Year and 5 Year warranties, depending on the product

purchased. See full warranty details at www.moogvideolarm.com/technical-support/warranty-plan/

Please take a few moments to register your purchase via the Online Product Registration Form at:

www.moogvideolarm.com/technical-support/product-registration

• Simple and Trouble-Free RMA process

• Receive product updates, and special promotion

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…