Gerber Florin 5-Function Handshower, 1.75gpm Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Need Help?
In
USA
Please callour toll-free Customer servicelineat
1-888-328-2383
or
WWW.GERBERONLINE.COM
for additionalassistance or service.
In
CA
Please call our toll-free Customerservicelineat
1-800-487-8372
or
WWW.GERBERONLINE.CA
foradditionalassistanceorservice.
Besoin d'aide pour?
Aux
États-Unis
, veuillez appeler notre ligne de Service à la clientèle sans frais au
1-888-328-2383
ou de visiter
WWW.GERBERONLINE.COM
pour obtenir de l'aide ou un service
supplémentaire. Au
Canada
, veuillez appeler notre ligne de Service à la clientèle sans frais au
1-800-487-8372
ou de visiter
WWW.GERBERONLINE.CA
pour obtenir de l'aide ou un service supplémentaire.
¿Necesita ayuda?
En
Estados Unidos
, favor de llamar a nuestra línea de servicio al cliente gratuita al
1-888-328-2383
o visitenos en
WWW.GERBERONLINE.COM
para obtener asistencia o servicio
adicional. En
Canada
, favor de llamar a nuestra línea de servicio al cliente gratuita al
1-800-487-8372
o visitenos en
WWW.GERBERONLINE.CA
para obtener asistencia o servicio adicional.
Handshower
Douche à main
Ducha de mano
D462024/D462029
D462033/D462034
D462035
D462039 D462126
D465006 G0049003
For D462024/D462029/D462033/D462034/D462035/D462039/D462126/
D465006
This product is engineered to meet the EPA WaterSense flow requirement.
The flow rate is governed by the flow rate controller. If replacement is ever
required, be sure to request appropriate flow rate controller to return the
product to its intended maximum flow rate and other EPA requirements.
Este producto está diseñado para cumplir con los requisitos de flujo de
agua del Programa EPA WaterSense. La tasa de flujo está regulada por el
controlador de flujo. Si es necesario reemplazarlo, asegúrese de solicitar un
controlador de flujo apropiado para devolver el producto a su caudal máximo
previsto y a otros requisitos de la EPA.
Ce produit est conçu pour respecter les exigences de débit d’eau du
programme WaterSense de l’EPA. Le débit est réglé par le régulateur de débit.
Si un remplacement est nécessaire, assurez-vous de demander un régulateur
de débit approprié pour retourner le produit à son débit maximal prévu et aux
autres exigences de l'EPA.
Tools You Will Need
Outils dont vous aurez besoin
Herramientas Necesarias
(2) Adjustable wrenches Needle-nose Pliers Pipe tape
(2) Clés à molette Pince à bec effilé Ruban pour tuyau
(2) Llave ajustables Alicates de extremos finos Cinta selladora para rosca
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically
with a soft cloth.Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Warranty Registration:
Please log on to gerberonline.com to register your product today.
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
Adjustable
Wrench
Llave ajustable
Pince à bec effilé
Clé à molette
Needle-nose Pliers
Alicates de extremos finos
Shown/Mostrado/Illustré
D462036/D462047
D462046/D461046
1. Remove the existing showerhead from the showerarm. Clean the debris from
the inside of the showerarm and the showerarm threads. Run water to flush
the residual debris from the inside arm (Fig 1).
2. Wrap the threads of the showerarm with the plumber's tape (Fig 2).
3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).
4. Connect the shower hose to bottom outlet of the showerarm mount and handshower
(Fig 4).
5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).
Douche à main multifonction
Ducha de mano con multifunción
D462030
D462025
Multi-Function Handshower
Adjustable
Wrench
Llave ajustable
Pince à bec effilé
Clé à molette
Needle-nose Pliers
Alicates de extremos finos
Shown/Mostrado/Illustré
D462036/D462047
D462046/D461046
1. Remove the existing showerhead from the showerarm. Clean the debris from
the inside of the showerarm and the showerarm threads. Run water to flush
the residual debris from the inside arm (Fig 1).
2. Wrap the threads of the showerarm with the plumber's tape (Fig 2).
3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).
4. Connect the shower hose to bottom outlet of the showerarm mount and handshower
(Fig 4).
5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).
Douche à main multifonction
Ducha de mano con multifunción
D462030
D462025
Multi-Function Handshower
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
Adjustable
Wrench
Llave ajustable
Pince à bec effilé
Clé à molette
Needle-nose Pliers
Alicates de extremos finos
Shown/Mostrado/Illustré
D462036/D462047
D462046/D461046
1. Remove the existing showerhead from the showerarm. Clean the debris from
the inside of the showerarm and the showerarm threads. Run water to flush
the residual debris from the inside arm (Fig 1).
2. Wrap the threads of the showerarm with the plumber's tape (Fig 2).
3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).
4. Connect the shower hose to bottom outlet of the showerarm mount and handshower
(Fig 4).
5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).
Douche à main multifonction
Ducha de mano con multifunción
D462030
D462025
Multi-Function Handshower
Adjustable
Wrench
Llave ajustable
Pince à bec effilé
Clé à molette
Needle-nose Pliers
Alicates de extremos finos
Shown/Mostrado/Illustré
D462036/D462047
D462046/D461046
1. Remove the existing showerhead from the showerarm. Clean the debris from
the inside of the showerarm and the showerarm threads. Run water to flush
the residual debris from the inside arm (Fig 1).
2. Wrap the threads of the showerarm with the plumber's tape (Fig 2).
3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).
4. Connect the shower hose to bottom outlet of the showerarm mount and handshower
(Fig 4).
5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).
Douche à main multifonction
Ducha de mano con multifunción
D462030
D462025
Multi-Function Handshower
Entretien
Votre nouveau robinet est conçu pour fonctionner sans problème, des années durant. Nettoyez-le périodiquement avec un chiffon doux pour qu’il conserve la même apparence qu’à l’état neuf. Évitez
les nettoyants abrasifs, la laine d’acier et les produits chimiques forts puisqu’ils endommageront le fini et rendront votre garantie nulle.
Enregistrement de la garantie:
veuillez vous connecter sur
gerberonline.com pour enregistrer votre produit aujourd'hui.
Mantenimiento
Su grifo nuevo está diseñado para brindar años de servicio sin problemas. Mantenga su apariencia nueva limpiándolo periódicamente con un paño suave. Evite limpiadores abrasivos, estropajo
de acero y químicos cáusticos porque deslustrarán el acabado y anularán la garantía.
Registro de la garantía:
por favor ingrese para gerberonline.com para registrar su producto en la actualidad.
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically
with a soft cloth.Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Warranty Registration:
Please log on to gerberonline.com to register your product today.
1.
Remove the showerhead from the hose by unscrewing the hose
conical counter-clockwise (Fig 1).
3. Remove any debris from the flow controller/check valve. Reinstall
the flow controller/check valve by pressing into opening of the
handshower handle. Then reattach the hose conical to the handshower
threads.
2.
The flow controller/check valve is located at the opening of the
handshower handle and has a different color plastic housing than
the handshower conical threads (Fig 2). Use the needle-nose pliers
to grasp the flow controller/check valve and pull the flow
controller/check valve out. Take care not to use excessive force
when grasping perimeter edge of the flow controller/check valve
so as to avoid damage (Fig 2 & 3).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gerber Florin 5-Function Handshower, 1.75gpm Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à