OWNER’S USE AND CARE GUIDE
GUIDE D’UTILISATION ET SOIN DE D'ENTRETIEN
MODEL • MODÈLE
CAUTION
PRÉCAUTION
Read and follow all safety rules and operating
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation avant
l’utilisation initiale de ce produit.
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
SYDNEY - SSWC056D1B
PRAGUE - SSBC056D1B / SSBC056D2B
2015.08.19
Silhouette 08212014
1-844-455-609 7
DO NOT RETURN THIS UNIT TO
THE RETAILER WITHOUT FURTHER
INSTRUCTIONS
Dear Valued Customer: We hope your Silhouette appliance fullls all of your entertaining
needs. Your satisfaction is our priority. Please contact our Customer Care Center toll-free
via 1.844.455.6097 for any inquiries you may have about your new purchase.
NE PAS RETOURNER CET APPAREIL
AU DÉTAILLANT JUSQU’À NOUVEL
ORDRE
Cher client : nous espérons que votre appareil Silhouette répond adéquatement à tous vos
besoins de divertissement. Notre priorité étant de vous satisfaire, si vous avez des questions
ou des préoccupations relativement à votre nouvelle acquisition, veuillez communiquer avec
notre Centre de service à la clientèle au numéro sans frais 1.844.455.6097.
NO DEVUELVA ESTA UNIDAD AL
VENDEDOR SIN ANTES RECIBIR
INSTRUCCIONES ADICIONALES
Estimado cliente: Esperamos que su aparato “Silhouette” pueda satisfacer todas sus
necesidades. Su satisfacción es nuestra prioridad. Por favor, póngase en contacto con
nuestro Centro de Atención al Cliente al número gratuito 1.844.455.6097, para cualquier
consulta o pregunta que usted pueda tener acerca de su nueva compra.
CONTENTS
CAUTION:
Read and follow all safety rules and operating
instructions before fi rst use of this product.
AVERTISSEMENT :
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation avant
l’utilisation initiale de ce produit.
TABLE DES MATIÈRES
Owner’s Use and Care Guide...........................................................1-12
• Safety Instructions
• Before Use
• Installation Instructions
• Features
• Operating Instructions
• Care and Maintenance
• Troubleshooting
• Warranty
Guide d’utiliser et soin propriètaire..............................................13-24
• Consignes de sécurité
• Avant l’utilisation
• Notice d’installation
• Caractéristiques
• Consinges d’utilisation
• Soins et entretien
• Dépannage
• Garantie
Model • Modèle
SSWC056D1B / SSBC056D1B / SSBC056D2B
8.8.
1
Thank you for choosing Silhouette
We know you’re excited. We are too! However, the more familiar you are with your new appliance, the better experience you will
have. We therefore strongly suggest that you read this Owner’s Manual before plugging in your new appliance. It contains
important operational information that will help you make full use of the technical features available in your appliance. The
manual also contains information designed to enhance operating reliability and safety, as well as tips to maintaining your new
appliance so that it brings you happiness for years to come.
Please visit www.silhouetteappliances.com to access self-service tools, FAQs and more. Should you need additional assistance,
please call 1-844-455-6097.
Note: You will need the below information to obtain service under warranty.
To receive service, you must provide the original receipt.
Model Number:
Serial Number:
Date of Purchase:
NEED HELP?
Before you call for service, here are a few things you can do to help us serve you
better:
Read this Owner’s Manual:
It contains instructions to help you use and maintain your appliance properly.
If you received a damaged appliance:
Immediately contact the retailer (or builder) that sold you the appliance.
Save time and money:
Check the Troubleshooting section at the end of the guide before calling. This section
helps you solve common problems that may occur.
If you do need service, you can relax, knowing help is only a phone call away.
Tel: 1-844-455-6097
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the electrical current.
ELECTRICAL REQUIREMENTS
WARNING
ELECTRICAL RATING: The serial rating plate indicates the
voltage and frequency the appliance is designed for.
To avoid installation / operation diffi culties, read these instructions thoroughly.
• This appliance must be grounded. Connect only to a properly grounded outlet. See “Grounding Instructions” section.
• Do not operate this appliance if it has a damaged power cord or plug, if it is not working properly, or if the appliance
has been damaged or dropped.
• Never allow children to operate, play with, or crawl inside the appliance.
• Never clean appliance parts with fl ammable fl uids. The fumes can create a fi re hazard or explosion.
• Do not store or use gasoline or any other fl ammable vapors or liquids in the vicinity of this or any other appliance.
The fumes can create a fi re hazard or explosion.
• Do not splice the power cord that is equipped with this appliance.
• Keep power cord away from heated surfaces.
• Do not immerse power cord, plug or the appliance itself in water.
• Do not use this product near water for example, in a wet basement, near a swimming pool or near a sink.
• Do not use corrosive chemicals or vapors in this appliance.
• Use this appliance only for its intended use, as described in this manual.
• Store beverages in sealed containers only.
• See door surface cleaning instructions in the Care and Maintenance section of this manual.
• Do not cover or block any openings on the appliance.
• Do not store perishable food items such as (but not limited to) meats and dairy products in your cooler.
• This appliance is intended for household use only. Do not attempt to operate or store this appliance outdoors.
• This appliance should be serviced only by qualifi ed service personnel. Contact the nearest authorized service facility
for examination, repair or adjustment.
• This unit is not designed for outside installation, including installation anywhere that is not temperature controlled
(garages, porches, carports, etc.).
IMPORTANT WARNING
An empty unit is a very dangerous attraction to children. Remove either the gasket or lid
from unused appliances, or take some other action that will guarantee it harmless.
DANGER: Risk of child entrapment. Before you throw away your old unit:
• Take off doors.
• Leave the shelves in place so that children may not easily climb in.
DON’T WAIT! DO IT NOW!
Please ensure that component parts shall be replaced with like components and that servicing shall be done by
factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or
improper service.
2
GROUNDING INSTRUCTIONS
This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock
by providing an escape wire for the electric current.
WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualifi ed electrician or
service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is
properly grounded.
If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
For best operation, plug this appliance into its own electrical outlet to prevent fl ickering of lights, blowing of fuse or trip-
ping of circuit breaker
DO NOT USE AN EXTENSION CORD
Use an exclusive 115V wall outlet. Do not connect your appliance to extension cords or together with another appliance
in the same wall outlet. Do not splice the cord. Do not under any circumstances cut or remove the third (ground) prong
from the power cord. Do not use and adapter plug with this appliance.
SAVE THESE INSTRUCTIONS!
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Installation Instructions
FOR YOUR SAFETY
• While performing installations described in this section, gloves and goggles or safety glasses should be worn. Two
people should be used when moving the cooler.
• Remove interior and exterior packaging prior to installation.
• Before connecting the appliance to a power source, let it stand upright for approximately 6 hours; this will reduce the
possibility of a malfunction in the cooling system from handling during transportation.
• Place your cooler on a fl oor that is strong enough to support it when it is fully loaded. To level your cooler, adjust the
front leveling leg at the bottom of the unit.
• Locate the cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight and heat
sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit to perform
improperly.
• Avoid locating the unit in moist areas.
• Plug the cooler into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be
directed toward a certifi ed electrician or an authorized service centre.
• Do not cover shelves with aluminum foil or any other material which may prevent air circulation.
• In order for the cabinet to remain effi cient do not over load it.
• Do not open the door unless necessary.
• Should the cooler be stored without use for long periods, it is suggested, after careful cleaning, to leave the door
ajar. This will allow air to circulate inside the cabinet in order to avoid possible formations of condensation, mold and
odors.
3
LOCATION
Selecting the proper location will ensure peak performance levels for your appliance. Choose a location where the unit
will not be exposed to heat emitting sources (e.g. a fi replace or a barbeque). The cooler should not be exposed to direct
sunlight. Do not use product near water, for example in a wet basement, near a swimming pool or sink.
To achieve operating effi ciency, the recommended (room ambient) operating temperatures should be between 16°C
(61°F) to 32°C (90°F).
NOTE: This unit is front breathing. Do not
block the front air vent. Blockage of the vent
will result in high operating temperatures and
system failure.
4
Installation Instructions
PREPARING THE ENCLOSURE
Tools you will need:
While performing installations described in this section, gloves and safety glasses or goggles should be worn.
Electrical Requirements:
The appliance must be connected to an individual, properly grounded electrical outlet, protected by a 15 or 20 ampere
circuit breaker or time delay fuse.
• It is recommended that you do not install the unit into a corner (i.e. directly beside a wall). This is to allow the door to
have a greater than 90° opening swing. A limited door swing may lead to damaging the door gasket, however, if it is
necessary to install the unit in a corner, be sure to allow 2-4 inches of clearance at each side.
• The rough cabinet opening must be on a level fl oor area and at least 24” (60.96 cm) deep by 24” (60.96 cm)wide
(min). The opening should also have a height of at least 34 3/4” (88.26 cm).
• The electrical outlet may be positioned from within either side of the adjacent cabinetry, or the rear of the shaded area
(as shown in Fig. 2).
• If the electrical outlet is located inside the adjacent cabinetry, cut a 1-1/2” (3.81 cm) diameter hole to admit the power
cord. If the cabinet wall is metal, the hole edge must be covered with a bushing or grommet.
Tape measure
Carpenter square
Electric drill with hole bit
Gloves
Level
Safety goggles
Flashlight
Fig.G
Operating Instructions
FEATURES
5
Installation Instructions
PREPARING THE ENCLOSURE (continued)
Important: The listed depth requirement for the installation is assuming that the electrical outlet is located in the adjacent
cabinetry or is fl ush mounted in the rear wall, not surface mounted in the enclosure.
1. Tempered Glass Door: Low-E glass, used to
refl ect and absorb heat.
2. Electronic Display and Controls: For view-
ing and regulating the temperature of the wine
cooler.
3. Magnetic Door Gaskets: Tight fi tting seals
retain all the cooling power and humidity levels.
4. Shelves
5. Handle
6. Front Mounted Exhaust: Allows for integrated
(built-in) applications.
7. Leveling Legs
8. Interior Light (not shown): LED lighting illumi-
nates the interior without the heat of an incan-
descent bulb.
Electrical Access
Fig F
Cabinets
Square
and
Plumb
34-3/4” From
Underside of
Countertop to
Floor
24” min
6”
2”
24”
Min*
1-1/2” dia. hole
*if electrical outlet
is in adjacent
cabinetry
8.8.
2
4
5
1
3
7
6
SSWC056D1B
CONTROL PANEL
6
Operating Instructions
Indicator light illuminates to signify the cooling mode is currently
in operation.
Control the interior light ON/OFF. (If you press this button, the
inner light is not controlled by the Mechanical Switch, it is
continuously lit).
To turn appliance on/off (press and hold this button for approxi-
mately 3 seconds).
Used to raise (warm) the temperature by 1° increments.
Used to lower (cool) the temperature by 1° increments.
Adjacent indicator light denotes which scale of temperature is
being displayed.
°C / °F
Setting the Temperature Controls
When you plug in your beverage centre for the fi rst
time the temperature will automatically be set to
12°C (54°F). The default setting is °F.
• Each depression of the
▲
▲ or
▼
▼ button will
allow you to adjust the temperature in 1° incre-
ments.
• To switch the display between °F and °C, de-
press the
▲
▲ and
▼
▼simultaneously for approxi-
mately 3-5 seconds.
FEATURES
2
4
5
1
3
7
6
SSBC056D1B
SSBC056D2B
1. Tempered Glass Door: Low-E glass, used to
refl ect and absorb heat.
2. Electronic Display and Controls: For viewing
and regulating the temperature of the Beverage
Centre.
3. Magnetic Door Gaskets: Tight fi tting seals
retain all the cooling power and humidity levels.
4. Shelves
5. Handle
6. Front Mounted Exhaust: Allows for integrated
(built-in) applications.
7. Leveling Legs
8. Interior Light (not shown): LED lighting illumi-
nates the interior without the heat of an incan-
descent bulb.
Operating Instructions
7
SSWC056D1B STORAGE
In order to achieve the maximum storage capacity of forty-eight (48) bottles, it will be necessary to position 7 bottles each
on the 6 shelves and 6 bottles on the bottom of the unit.
IMPORTANT
• The maximum* capacity of the unit is 48 (750ml) wine
bottles.
• Store wine in sealed bottles only.
*When stocked as per instructions
SSBC056D1B / SSBC056D2B STORAGE
In order to achieve the maximum storage capacity of six (6) bottles and 138 beverage cans, it will be necessary to put 46
cans on each of the 3 shelves and 6 bottles on the bottom of the unit.
IMPORTANT
• The maximum* capacity of the unit is 6 (750ml) wine
bottles and 138 (355ml) beverage cans.
*When stocked as per instructions
FUNCTION INSTRUCTION
Door Ajar Alarm Function
• If the door is not closed completely the alarm will sound after 5 minutes. Please close the door completely to avoid the
loss of cold energy. The alarm will stop once the door is closed.
Temperature Memory Function
• If power is lost the set temperature will be saved by the unit. Once the power is back on the unit will return to the
same set temperature.
Temperature Alarm Function
• If the inner temperature is higher than 23°C (73°F), “HI” is shown on the display panel and the alarm will sound after
one hour. It is to inform you that the inner temperature is too high, please check the reason.
• If the inner temperature is lower than 0°C (32°F), “LO” is shown on the display panel and the alarm will sound and the
malfunction indicator light will appear at the same time.
If too many bottles/cans are put in at once or the door has not been closed tightly, the unit will display the “HI” signal in the
display panel. This is normal, please wait 5 minutes after you close the door and “HI” will disappear.
It is normal that the cabinet shows “HI” or “LO” from time to time. If it occurs frequently or lasts for a long time, you can
restart the unit by unplugging it. If the problem occurs once again after restart, please contact customer service.
SSWC056D1B SHELVES
To remove wine shelves:
1. Fully extend the shelf you wish to remove .
2. Lift the front of the shelf up.
3. Holding the shelf track, push the shelf in, then up to release from the rear dampers.
Important: Do not cover the gap on the racks with aluminum foil or any other materi-
al that will prevent adequate air circulation within the cabinet.
Operating Instructions
SSBC056D1B / SSBC056D2B SHELVES
To remove shelves:
1. Lift the back of the shelf up so the shelf pegs are above the lower rail.
2. Slide the shelf out of the unit with the pegs on the upper rail.
Important: Do not cover the gap on the shelves with aluminum foil or any other
material that will prevent adequate air circulation within the cabinet.
8
Operating Instructions
9
DOOR REVERSAL
1. Bottom Hinge (Right)
2. Screws
3. Door Axis
4. Screws
5. Mechanical Switch
6. Top Hinge (Right)
7. Screws
8. Top Hinge (Left)
9. Plug
10. Bottom Hinge (Left)
1. Open the door to a 90° angle, take out 2 screws from the lower door axis (3), remove the door (refer to Fig. 1A), then
pull out the door and door axis (Fig. 1A).
2. Put the door safely down, unscrew 2 screws (4) at the bottom and remove the machanical switch (5), then install (5)
at the top of the door frame (Fig 1A and 1B).
3. Take out 3 screws (7) from the top hinge (right) (6) and remove the right top hinge (Fig. 1C).
4. Remove the plug (9) from the top left of the cabinet and install the spare top hinge (left) (8) at the top left of the cabi-
net with 3 screws (Fig. 1D).
5. According to the above procedure, install the spare lower hinge (left) (10) onto the lower left cabinet (Fig. 1E).
6. Once the door has been moved, install the door the same way that it was removed and ensure the door is properly
aligned.
7. Block the hole at the top right of the cabinet with the spare plug.
Please note: Do not lay the unit on its back.
Fig 1A
Fig 1B
Fig 1C
Fig 1E
Fig 1D
Fig 1F
Care and Maintenance
CLEANING YOUR APPLIANCE
POWER FAILURE
• Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you
minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need
to take the proper steps to protect your contents.
VACATION TIME
• Short vacations: Leave the cooler operating during vacations of less than three (3) weeks.
• Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance.
Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open
if necessary.
ENERGY SAVING TIP
• The unit should be located in the coolest area of the room, away from heat producing appliances, and out of direct
sunlight.
MOVING YOUR APPLIANCE
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation. Also protect the outside of the appli-
ance with a blanket or similar item.
10
Cleaning the Inside:
• Walls, fl oor, inside window and shelves - Some water deposits and dust can be removed with a dry paper towel,
others may require a damp cloth.
Cleaning the Outside:
• Outer Case - It is important to keep the area clean where the door seals against the cabinet. Clean this area with a
soapy cloth. Rinse with a damp cloth and let dry.
• Control Panel and Door - Wipe with a damp cloth and dry thoroughly. Do not use cleaning sprays, large amounts of
soap and water, abrasive or sharp objects on the panel, they can damage it. Some paper towels may also scratch the
control panel and glass on the door.
• Door Surface - Use only mild, non-abrasive detergents applied with a clean sponge or soft cloth. Rinse well with
damp cloth.
NOTE: Do not use cleaners containing ammonia or alcohol on the cooler. Ammonia or alcohol can damage the appear-
ance of the appliance.
NOTE: Never use any commercial / abrasive cleaners or sharp objects on any part of the cooler.
Troubleshooting
Occasionally, a problem is minor and a service call may not be necessary- use this troubleshooting guide for a possible
solution. If the unit continues to operate improperly, call an authorized service depot or our Toll Free Number 1-844-455-
6097 for assistance.
PROBLEM POSSIBLE CAUSE SOLUTIONS
No power • A fuse in your home may be
blown or the circuit breaker
tripped
• Power surge
• Plug not fully inserted into wall
outlet
• Replace fuse or reset circuit
breaker
• Unplug the cooler, wait a few sec-
onds and then plug it back in
• Make sure the 3-prong plug is
fully inserted into the outlet
Cabinet temperature is too
high
• Temperature is set too high
• Door is not shut properly or
opened excessively
• Exhaust vent is obstructed
• Recently added a large quantity of
warm beverages to the cabinet
• Verify the temperature control
setting, adjust if necessary
• Ensure that the door is fully
closed and that the gasket is
sealing against the cabinet. Open
the doors only as needed and for
short periods of time
• Verify there is nothing blocking
the front mounted exhausting vent
• Limit the quantity of warm bev-
erages being introduced to the
cabinet at the same time. Attempt
to stagger the load introduction if
possible
Alarm beeping and “HI” is
displayed on the control
panel
• Recently added a large quantity
of warm bottles or cans to the
cabinet
• The door is not closed tightly
• System leak, evaporator fan fail-
ure or compressor fan failure
• Limit the quantity of warm items
being introduced to the cabinet
• Be sure the door is closed tightly
• Contact a service centre, to stop
the beeping, unplug the unit
Alarm beeping and “LO”
is displayed in the control
panel
• Sensor failure, evaporator tem-
perature is too low
• Contact a service centre, to stop
the beeping, unplug the unit
Condensation on the cabi-
net and/or doors
• High humidity conditions in the
home
• Door not shut properly or opened
excessively
• The condensation will subside
once humidity conditions return to
normal
• Ensure that the door is fully
closed and that the gasket is seal-
ing against the cabinet. Open the
door only as needed and for short
periods of time
11
LIMITED IN-HOME APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating
conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter
“Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First Year
During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s
option, at no charge to the ORIGINAL purchaser.
To obtain
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance
Service
requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at
their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service
must be performed by a qualied service technician.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all
obligations of Danby under this warranty shall be void.
Boundaries of
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be
In Home Service
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for
warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he
responsibility of the purchaser.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due
to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its
authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees
under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages
to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of
the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions
(extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our
AUTHORIZED SERVICE DEPOT.
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
04/09
1-800-263-2629
Warranty Service
In-home
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest
service center your unit must be delivered to the nearest authorized Danby Service Depot, as service
must only be performed by a technician qualified and certified for warranty service by Danby. Transpor-
tation charges to and from the service location are not protected by this warranty and are the responsi-
bility of the purchaser.
During the first twenty four (24) months, any functional parts of this product found to be defective, will be
repaired or replaced, at warrantor’s option, at no charge to the ORIGINAL purchaser.
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized
Service Depot. Any appliance requiring service outside the limited boundaries of “In Home Service” ,it
will be the consumer’s responsibility to transport the appliance (at their own expense) to the original
retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Service” below.
Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby
service depot, where service must be performed by a qualified service technician. If service is performed
on the units by anyone other than an authorized service depot, or the unit is used for commercial
application, all obligations of Danby under this warranty shall be void.
First 24 Months
To obtain
Service
Boundaries of
In Home Service
LIMITED IN-HOME APPLIANCE WARRANTY
This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is
used under the normal operating conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or
Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other
contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied,
made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees,
including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is
hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property,
including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the
purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to
persons or property caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
1) Power failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating
conditions (extremely high or low room temperature).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for
outdoor application). Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event
warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.
Warranty Service
In-home
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N1H 6Z9
Telephone: (519) 837-0920 FAX: (519) 837-0449
Danby Products Inc.
PO Box 669, Findlay, Ohio, U.S.A. 45840
Telephone: (419) 425-8627 FAX: (419) 425-8629
1-800-263-2629
07/13
13
Merci d’avoir choisi Silhouette
Nous savons que vous êtes excité. Nous sommes aussi! Cependant, le plus que vous vous familiarisez avec votre
nouvel appareil, le mieux va être votre expérience. Nous suggérons donc de lire ces instructions avant connecter votre
nouvel appareil. Ce manuel contient des informations opérationnel important qui vous aidera à faire un usage pleine de les
caractéristiques techniques disponibles dans votre appareil. Le manuel contient également des informations conçu
pour améliorer la fiabilité et la sécurité de votre appareil ainsi que des conseils pour le maintien, pour vous assurez des annees
de bonheur.
Se il vous plaît visitez www.silhouetteappliance.com pour accéder les outils libre-service, FAQ et plus encore. Si jamais vous
avez besoin d'aide supplémentaire, s’il vous plaît appelez 1-844-455-6097. S’il vous plaît ayez votre facture d’achat, le
numéro de modèle, et le numéro de série près durant l'appel.
Remarque : Ces renseignements seront nécessaires si votre appareil a besoin d’entretien ou pour les demandes de
renseignements généraux. Pour bénéficier d’une opération de maintenance ou de dépannage, le reçu
original sera exigé.
Numéro de modèle :
Numéro de serie :
Date d’achat :
BESOIN D’ASSISTANCE ?
Veuillez trouver quelques conseils avant de faire appel à nos services, cela
nous aidera à mieux vous servir :
Lisez ce guide :
Il comprend des instructions pour l’utilisation et l’entretien adapté de votre
appareil.
Si votre nouvel appareil est endommagé :
Contactez immédiatement le revendeur (ou le fabricant).
Gagnez du temps et de l’argent :
Avant de faire appel à nos services, consultez à nouveau la section
« Dépannage ». Cette section vous aidera à résoudre des problèmes courants.
Si une réparation est nécessaire, ne vous inquiétez pas, la solution est au
bout du fil.
Tel: 1-844-455-6097
CONDITIONS ÉLECTRIQUES
Pour éviter les diffi cultés d’installation / du fonctionnement, veuillez lire ces instructions soigneusement.
• Cet appareil doit être mis à la terre. Branchez le seulement dans une prise correctement mise à la terre. Référez-
vous au chapitre “Instructions de mise à la terre” ci-dessus.
• Ne faites pas fonctionner cet appareil s’il a un cordon ou fi che électrique endommagé, s’il ne fonctionne pas correcte-
ment, ou si l’appareil a été endommagé ou échappé.
• N’épissez pas le cordon électrique.
• Ne permettez jamais à un enfant de faire fonctionner l’appareil, de jouer avec ou de ramper à l’intérieur.
• Ne nettoyez jamais de pièces de l’appareil avec un liquide infl ammable. Les vapeurs peuvent constituer un risque
d’incendie ou provoquer une explosion.
• N’entreposez et n’utilisez pas d’essence ou d’autres liquides ou vapeurs infl ammables à proximité de cet appareil ou
de tout autre appareil. Les vapeurs peuvent constituer un risque d’incendie ou provoquer une explosion. Gardez le
cordon électrique éloigné des sources de chaleur.
• N’immersez pas le cordon ou sa fi che dans aucun liquide.
• N’utilisez pas cet appareil près de bassins d’eau, par exemple dans un sous-sol détrempé, près d’une piscine ou
d’un évier.
• N’utilisez pas de produits chimiques ou vapeurs corrosives dans/près de cet appareil.
• N’utilisez cet appareil que pour les fi ns aux quelles il est conçu comme indiqué dans ce guide.
• Entreposez le vin dans des bouteilles scellées seulement.
• Référez-vous aux instructions de nettoyage du fi ni de la porte se trouvant au chapitre de Soins et nettoyage de ce
guide.
• Ne recouvrez pas ou n’obstruez aucune ouverture de l’appareil.
• Ne placez pas les articles périssables de nourriture dans votre appareil. (Par exemple, les viandes et les produits
laitiers).
• Cet appareil est conçu pour un usage domestique à l’intérieur seulement. N’entreposez ni n’utilisez pas cet appareil
à l’extérieur.
• Cet appareil ne devrait être réparé que par du personnel qualifi é. Pour tout examen, réparation ou réglage, contactez
votre centre de service le plus rapproché.
• Cet appareil n’a pas été conçu pour une installation extérieur, incluant l’installation dans un endroit qui n’a pas une
température contrôlée (y compris les garages, les vérandas, les abris de voitures, etc.).
Consignes de sécurité importantes
PRENDRE CONNAISSANCE DE TOUTES LES INFORMATIONS
RELATIVES À LA SÉCURITÉ AVANT D’UTILISER LE PRODUIT
AVERTISSEMENT IMPORTANT!
Un refroidisseur vide peut représenter un attrait dangereux aux enfants. Retirer le joint d’étanchéité, les
loquets, les couvercles ou portes des appareils ménagers inutilisés, ou prenez d’autres mesures qui assureront
que l’appareil ne posera aucun danger.
DANGER : Risque de piéger un enfant. Avant de mettre votre vieux refroidisseur au rebut :
• Enlever les portes.
• Laisser les tablettes en place afi n que les enfants ne puissent pas facilement y entrer.
N’ATTENDEZ PAS! FAITES-LE IMMÉDIATEMENT!
Cet appareil doit être mis à la terre. En cas de courtcircuit, la mise à la terre réduit les risques de décharge
électrique en fournissant un échappatoire au courant électrique. L’appareil est muni d’un cordon électrique
comprenant un fi l de mise à la terre et une fi che de terre.
Veuillez vous assurer que les pièces de rechange sont remplacées par des pièces similaires, et que l’entretien
soit effectué par un technicien agréé par l’usine, afi n réduire le risque d’incendie à cause de mauvaises pièces
ou d’entretien mal fait.
ATTENTION
ÉNERGIÉ ÉLECTRIQUE : Le voltage et la fréquence requis pour
ce l’appareil sont indiqués sur la plaque d’identifi cation.
14
MISE À LA TERRE
Cet appareil doit être mis à la terre. Dans l’éventualité d’un court-circuit, la mise à la terre procure un chemin direct con-
tournement du courant pour prévenir l’électrocution des manipulateurs de l’appareil.
L’appareil est muni d’un cordon électrique comprenant un fi l de mise à la terre et une fi che de terre. Branchez la fi che
dans une prise de courant correctement installée et mise à la terre.
AVERTISSEMENT - Une fi che de mise à la terre mal branchée peut entraîner un risque d’incendie, de choc électrique
ou de blessures aux personnes qui utilisent l’appareil. Si vous n’êtes pas certain que l’appareil est correctement mis à la
terre, consultez un préposé du service qualifi é.
Si la prise murale est un prise à 2 branches, c’est votre obligation, et la responsabilité vous en incombe, de la faire rem-
placer par une prise à trois branches adéquatement mise à la terre.
Pour un meilleur rendement et pour éviter que les ampoules d’éclairage de la résidence soient affectées d’un affaisse-
ment de tension, ou que le fusible ou disjoncteur du circuit ne grille ou ne se déclenche, dédiez un circuit individuel d’ali-
mentation à la machine à glaçons.
N’UTILISEZ JAMAIS DE FIL DE RALLONGE
Brancher l’appareil à son propre curcuit de 115V. N’utilisez pas de rallonge électrique pour brancher votre appareil. Ne
branchez pas l’appareil à une prise femelle multiple qui sera également utilisée pour d’autres appareils électriques.
N’épissez pas le cordon électrique. N’utilisez pas d’adaptateur de fi che avec cet appareil. N’utilisez pas de cordon de
rallonge avec cet appareil.
SAUVEGARDE CES INSTRUCTIONS!
Consignes d’installation
POUR VOTRE SÉCURITÉ
• En faire les installations décrites dans cette section, des gants, les lunette de sécurité devraient être portés. Il faut
deux personnes ou plus pour déplacer le refroidisseur.
• Retirez les emballages intérieur et extérieur avant l’installation.
• Avant de brancher l’appareil à une prise électrique, laissez-le debout pendant approximativement 6 heures; cela
permet de réduire les risque d’un mauvais fonctionnement éventuel du circuit de refroidissement en raison de sa
manutention pendant le transport.
• Placez votre l’appareil sur un sol suffi samment solide pour le supporter lorsqu’il est plein. Pour mettre votre l’appareil
de niveau, ajustez la patte de mise à niveau avant située au bas du l’appareil de qualité supérieure.
• Éloignez le refroidisseur des rayons directs du soleil et de toute source de chaleur (four, appareil de chauffage, radia-
teur, etc.). Les rayons directs du soleil et les sources de chaleur peuvent augmenter la consommation électrique. Les
températures extrêmement basses peuvent provoquer un mauvais fonctionnement de l’appareil.
• Évitez d’installer l’appareil dans une zone humide.
• Branchez le refroidisseur à une prise murale correctement mise à la terre. Sous aucun prétexte, vous ne devez
couper ou enlever la troisième branche (mise à la terre) de la fi che du cordon électrique. Pour toute question relative
à l’alimentation ou à la mise à la terre, faites appel à un électricien qualifi é ou à un centre de service autorisé.
• Ne recouvrez pas les tablettes d’une feuille d’aluminium ou de tout autre matériau pour tablette qui pourrait empêch-
er la circulation de l’air.
• N’ouvrez la porte qu’en cas de besoin.
• Lorsque la tout refroidisseur est entreposée pour une longue période sans être utilisée, on recommande, après un
nettoyage minutieux, de laisser la porte ouverte afi n de faire circuler l’air à l’intérieur, de façon à éviter l’apparition de
condensation, de moisissure ou d’odeurs.
• Ne pas couvrir les tablettes avec un papier d’alluminium ou tout autre matériel qui pourrait prévenir la circulation de
l’air.
• Pour fonction maximale de l’appareil il est préférable de ne pas surcharger les tablettes.
Consignes de sécurité importantes
PRENDRE CONNAISSANCE DE TOUTES LES INFORMATIONS
RELATIVES À LA SÉCURITÉ AVANT D’UTILISER LE PRODUIT
15
Consignes d’installation
ENDROIT
Le choix du bon emplacement permettra à votre appareil d’avoir un rendement maximal. Choisissez un endroit où l’appa-
reil ne sera pas exposé à des sources de chaleur (p.ex., une cheminée ou un barbecue). N’utilisez pas ce produit près
de l’eau, par exemple dans un sous-sol humide, près d’une piscine ou d’un évier.
Afi n d’obtenir un opérationnel optimal, les températures (ambiantes de la pièce) de fonctionnement recommandées
devraient s’élever à entre 16°C (61°F) - 32°C (90°F).
REMARQUE : Cette unité est la respiration
avant. Ne bloquez pas la bouche d’aération
sur la face avant de l’appareil. Le blocage de la
bouche d’aération se traduira par des
températures de fonctionnement élevées et de
défaillance du système.
PRÉPARATION DU LA OUVERTURE
Outils nécessaires
En faire les installations décrites dans cette section, des gants, les lunette de sécurité devraient être portés.
Conditons électriques :
L’appareil doit être raccordé à une prise individuelle correctement installée et mise à la terre, protégée par un disjoncteur
ou un fusible temporisé de 15 ou 20 ampères.
• Nous vous recommandons de ne pas installer le refroidisseur dans un coin (c.-à-d. directement contre un mur). Cela
afi n que l’angle d’ouverture de porte limitée empêchera les étagères de sortir comme
• prévu, et peut endommager le ou les joints de la porte. Toutefois, s’il est nécessaire d’installer l’appareil dans un
coin, assurez-vous de laisser 2-4 pouces d’espace de chaque côté.
• L’ouverture brute de l’enceinte doit être sur une surface de plancher plane et avoir au 63,5 cm (25 po) de profondeur
par 60,96 cm (24 po) min. de largeur. L’ouverture doit également avoir une hauteur d’au moins 86,8 cm (34 9/16 po).
• La prise électrique peut être placée de l’intérieur sur l’un des côtés des armoires adjacentes ou à l’arrière dans la
zone en gris (tel qu’illustré sur la fi gure 2).
• Si la prise électrique se trouve dans l’armoire adjacente, percez un trou de 3,8 cm (1 1/2 po) de diamètre pour faire
passer le cordon d’alimentation. Si la paroi de l’enceinte est métallique, le contour du trou doit être recouvert à l’aide
d’un coussinet ou d’un passe câble.
16
Ruban à
mesurer
Equerre de
charpentier
Perceuse et jeu de
scie cylindrique
Gants
Niveau
Lunette de sécurité
Lampe de poche
Fig.G
Consignes d’utilisation
CARACTÉRISTIQUES
Consignes d’installation
17
Important : Le requirement de profondeur pour l’installation suppose que la prise murale est localisée dans une autre
armoire ou est monté dans le mur, pas monté sur la surface dedans l’ouverture.
1. Portes en verre trempé : Verre à faible émissivité,
utilisé à réfl échir et absorber la chaleur.
2. Controls électroniques : Contrôle de la température
de l’unité.
3. Joint étanche magnétique : Le joint étanche permet
de conserver le niveau de température et d’humidité
à l’intérieur du cabinet.
4. Étagères
5. Poignée
6. Échappement sur le devant : Pour des applications
intégrées cabinet.
7. Pieds de nivellement
8. Lumière intérieures (non illustré) : S’allume lor-
squ’on ouvre la porte du cabinet.
Accès Électrique
Fig E
Équerre
Armoire
et
plomberie
34-3/4 po
Comptoir
au
plancher
24
po min
6po
2po
24po
Min.
Trou de 1 1/2 po
*si la prise murale
n'est pas
dans l'ouverture
d'installation
8.8.
2
4
5
1
3
7
6
SSWC056D1B
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Danby SSWC056D1B Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Danby SSWC056D1B User manual
Documents connexes
-
Danby DBC056D4BSSPR Mode d'emploi
-
-
-
-
-
-
-
Danby DWC140D1BSSPR Le manuel du propriétaire
-
-