MicroTouch M1-156IC Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Rev 1061723.1
TOUCH COMPUTER
M1-156IC-AA2
M1-215IC-AA2
USER MANUAL
2
Table of Contents
About This Document ................................................................................. 4
Compliance Information .............................................................................. 5
Important Safety Instructions ...................................................................... 7
Usage Notice ............................................................................................................ 7
Precautions............................................................................................................... 7
Warnings .................................................................................................................. 9
Installation Tips ......................................................................................... 10
Product Overview ..................................................................................... 11
Key Features ...........................................................................................................11
Unpacking ...............................................................................................................11
Package Contents .................................................................................................. 12
Product Setup and Use ............................................................................. 13
Input and Output Connectors.................................................................................. 13
Configuration and Cable Connections .................................................................... 13
Turning the Touch Computer On and Off ................................................................ 14
Mounting options ...................................................................................... 15
VESA Mount ........................................................................................................... 15
Specifications and Dimensions ................................................................. 16
Specifications ......................................................................................................... 16
Dimensions ............................................................................................................. 18
M1-156IC-AA2, without stand ................................................................................ 18
M1-215IC-AA2, without stand ................................................................................ 20
M1-156IC-AA2, with stand ..................................................................................... 22
M1-215IC-AA2, with stand ..................................................................................... 23
3
Optional Accessory Installation ............................................................ 23
Installing the Optional Stand ................................................................................... 24
Removing the Optional Stand ................................................................................. 26
Installing the MSR .................................................................................................. 27
Removing the MSR................................................................................................. 27
Installing Other Optional Accessories ..................................................................... 27
Appendix ................................................................................................... 28
Cleaning ................................................................................................................. 28
Solutions to Common Problems ............................................................................. 28
Warranty Information .............................................................................................. 29
RoHS Declaration ................................................................................................... 30
4
About This Document
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission
of MicroTouchTM a TES Company.
5
Compliance Information
For FCC (USA)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For IC (Canada)
CAN ICES-3(B)/NMB-3(B)
For CE (EU)
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that, under the European Directive 2012/19/EU governing waste
from electrical and electronic equipment, this product must not be disposed of with other municipal
waste. Please dispose of your waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
For more information about recycling of this product, please contact your local city office or your
municipal waste disposal service.
6
Renseighements relatifs à la conformité
Pour la FCC (États-Unis)
Ce matériel a fait l’objet d’essais qui ont déterminé qu’il respectait les limites d’un appareil de classe
B selon la partie 15 des règlements de la FCC. Ces limites sont établies pour assurer une protection
raisonnable contre les parasites nuisant à une installation résidentielle. Ce matériel génère, utilise et
peut émettre des ondes radio électriques, et lorsqu’il n’est pas installé et utilisé selon les instructions,
peut causer des parasites nuisant aux communications radio. Il n’y a toutefois aucune garantie qu’il
n’y aura pas de parasites dans une installation en particulier. Si ce matériel cause des parasites à la
réception d’ondes radio ou de télévision, ce qui peut être déterminé en l’éteignant et en l’allumant,
l’utilisateur est invité à essayer de corriger le problème des parasites par l’une ou l’autre des mesures
suivantes :
• Réorienter ou déplacer l’antenne de réception.
Augmenter la distance entre le matériel et la réception.
Brancher le matériel dans une prise sur un autre circuit que celui où le récepteur est
branché.
Consulter le distributeur ou un technicien radio ou TV expérimenté pour des conseils.
L’appareil respecte la partie 15 des règlements de la FCC. Le fonctionnement doit respecter les deux
conditions suivantes : 1) cet appareil ne doit pas causer de parasites et (2) cet appareil doit accepter
tous les parasites reçus, notamment ceux pouvant causer un fonctionnement non voulu.
Pour Industrie Canada
Norme canadienne NMB-3(B)
Pour la CE (UE)
L’appareil respecte la directive 2014/30/UE relative à la compatibilité électromagnétique et la
directive 2014/35/EU sur les limites de basse tension
Informations sur l'élimination
Déchets d'équipements électriques et électroniques
Ce symbole sur le produit indique que, conformément à la directive européenne 2012/19/UE régissant
les déchets d'équipements électriques et électroniques, ce produit ne doit pas être jeté avec les autres
déchets municipaux. Veuillez éliminer vos déchets d'équipement en les remettant à un point de
collecte désigné pour le recyclage des déchets d'équipements électriques et électroniques. Pour éviter
d'éventuels dommages à l'environnement ou à la santé humaine dus à une élimination incontrôlée
des déchets, veuillez séparer ces articles des autres types de déchets et les recycler de manière
responsable afin de promouvoir la réutilisation durable des ressources matérielles. Pour plus
d'informations sur le recyclage de ce produit, veuillez contacter votre mairie ou votre service municipal
d'élimination des déchets.
7
Important Safety Instructions
Before using this product, please read the user manual thoroughly to help protect against property
damage and to ensure your personal safety and the safety of others.
Be sure to observe the following instructions.
For installation or adjustment, please follow the instructions in this manual and refer all servicing to
qualified service personnel.
Usage Notice
Precautions
Please follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do
Disconnect the power plug from AC outlet if the product is not going to be used for an extended
period of time.
Don’t
Do not operate the product under the following conditions:
Extremely hot, cold or humid environment.
Areas susceptible to excessive dust and dirt.
Near any appliance generating a strong magnetic field.
! Warning
To prevent the risk of fire or shock hazards, do not expose the product to moisture.
! Warning
Please do not open or disassemble the product, as this may cause electric shock.
! Warning
The AC power cord must be connected to an outlet with ground connection.
8
Avis d’utilization
Précautions
Veuillez suivre toutes les mises en garde, précautions et entretiens recommandés dans ce manuel
d’utilisation pour maximiser la durée de vie de votre unité.
À faire :
Utiliser uniquement l’adaptateur d’alimentation prescrit pour votre appareil.
Débrancher l’appareil lorsqu’il n’est pas utilisé pendant une période prolongée.
À éviter :
Ne jamais utiliser l’appareil dans les conditions suivantes :
des conditions environnementales extrêmes (chaud, froid ou humidité)
des endroits remplis de poussières et de saletés.
à proximité d’appareils produisant un fort champ magnétique
! Mise en garde
Pour prévenir les risques d’incendie ou d’électrocution, ne pas exposer le produit à
l’humidité.
! Mise en garde
Prière de ne pas ouvrir ou démonter le produit, car cela pourrait entraîner l’électrocution.
! Mise en garde
Le cordon d’alimentation doit être branché à une prise pourvue d’une mise à la terre.
9
Warnings
To turn off touch computer power, press the “Powerbutton on the right side on the back of the touch
computer.
When the Power button is pressed, the main power of the touch computer is not turned off completely.
To disconnect power completely, remove the power plug from the outlet.
! Si l’un des événements suivants se produit, débranchez immédiatement la fiche
d’alimentation de la prise: le moniteur est tombé; le boîtier est endommagé; de l’eau est
renversée ou des objets tombent à l’intérieur du moniteur.
Si vou ne débranchez pas immédiatement la fiche d’alimentation, vous risquez de
provoquer un incendie ou un choc életrique. Contacter le personnel de service qualifé
pou inspection.
! Si le cordon d’alimentation ou la fiche est endommagé, ou deviant chaud, éteignez le
moniteur, assurez-vous que la fiche d’alimentation a refroidi et débranchez la fiche
d’alimentation de la prise.
Si le moniteur est toujours utilizé dans cet état, il peut provoquer un incendie ou un choq
électrique. Contactez votre revendeur pour le remplacement.
! If any of the following occur, remove the power plug from the outlet immediately:
the touch computer is dropped; the housing is damaged; water is spilled onto or objects
dropped inside the touch computer.
Failure to immediately remove the power plug may result in fire or electrical shock.
Contact qualified service personnel for inspection.
! If the power cord or plug is damaged or becomes hot, turn the touch computer off,
make sure the power plug has cooled down and remove the power plug from the
outlet.
If the touch computer is still used in this condition, it may cause fire or electrical shock.
Contact your dealer for replacement.
!
Warning This product can expose the user to chemicals,
including lead, which are known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
10
Installation Tips
Things to avoid
Don't install in a high-temperature environment. Operating temperature: 0˚C to 40˚C (0˚F to 104˚F),
storage temperature -20C - 60C (-4˚F to 140˚F). If the touch computer is used in a high temperature
environment or near any heat sources, the case and other parts may become distorted or damaged,
resulting in overheating or electrical shock.
Don't install in a high-humidity environment.
Operating humidity: 20-90%
Don't insert the power plug into anything other than a grounded 100-240V AC outlet.
Don’t use a damaged power plug or worn outlet.
The use of extension cords is not recommended.
The use of the power supply that comes with the MicroTouch product is strongly recommended.
Don't place the touch computer on an unstable shelf or surface.
Dont place objects on the touch computer.
If the touch computer is covered or the vents are blocked, the touch computer could overheat and
cause a fire.
Please keep a 10 cm minimum distance between the touch computer and the surrounding structures
to allow sufficient ventilation.
Don't move the touch computer when it is connected to the power cord When moving the touch
computer, make sure to remove the power plug and cables.
If you encounter a problem during installation, please contact your dealer for assistance. Do
not attempt to repair or open the touch computer.
11
Product Overview
This desktop touch computer with Android operating system is designed and developed to provide a
flexible desktop touch computer solution with easily installed optional MSR, Camera, Light Bar and
Barcode Scanner accessories. Its versatility makes it an exceptional choice for applications in all
business sectors, especially in the retail market.
Key Features
Processor: MediaTek MT8390
RAM & Storage: 8GB LPDDR4X + 64GB eMMC
Size: 15.6" / 21.5" TFT LCD
Resolution: 1920 x 1080
Contrast Ratio: 700:1 / 3000:1
Aspect Ratio: 16:9
Brightness: 382 cd/m2 / 298 cd/m2
View Angle: H:178˚, V:178˚
Network: Wi-Fi 6 2T2R, Bluetooth 5.2 1T1R
Video Output Port: 1 HDMI and 1 USB-C DP (Cannot display at the same time,
the computer must be restarted after switching)
Camera: 5MP fixed-focus
100 mm x 100 mm VESA mount
P-cap touch with up to 10 simultaneous touches
Plug and Play: no touch driver installation required
Warranty: 3 years
Unpacking
When unpacking please ensure that all the items in the following Accessories section are included. If
any are missing or damaged, please contact the place of purchase for a replacement.
12
Package Contents
No.
Part
Qty
1
LCD Touch computer
M1-156IC-AA2 or
M1-215IC-AA2
1
2
AC Power
Cord
(1.8 m)
1
3
AC-DC converter
1
4
Cable Cover
2
13
Product Setup and Use
Input and Output Connectors
Power Connector
Power Input: DC - in (Center pin: + 12 VDC; Barrel: ground).
Communications Ports
USB 3.0 is a Type-A USB communications port
USB Type-C are Type-C USB communications ports.
Video Output
HDMI: Digital video output.
Removable Storage Media
TF Card and SIM Card are slots for removable storage
Network Connection
LAN is an Ethernet network connector
Peripheral Connection Points
There are four peripheral connection points, one on each side and the top and bottom sides.
Connection is by provided USB Type-C connectors. These peripheral points/potrs are for MicroTouch-
supplied accessories only.
Configuration and Cable Connections
Power is supplied by the included AC-to-DC power supply’s fixed 12 volt DC cable connector. Plug
the power adapter’s DC barrel connector into the DC jack on the touch computer. Plug the AC power
cable female connector into the receptacle on the power converter, then plug the male connector of
the AC cable into a wall outlet.
Connect your network cable to the LAN connector or WI FI. All other ports are optional I/O or outputs.
14
Turning the Touch Computer On and Off
Function
Description
Power On
Press and hold the Power button for 2 seconds to power on
Sleep
Press and release the power button to enter sleep mode.
Press and release again to resume from sleep mode.
Power Off
Press and hold the Power button for 2 seconds to power off
15
Mounting options
The touch computer may be mounted to a stand, arm, or other device that has a 100mm x 100mm
standard VESA mount hole pattern.
VESA Mount
The touch computer has an integral VESA standard mount pattern that conforms to the “VESA Flat
Display Mounting Interface Standard” which defines a physical mounting interface and corresponds to
the standards for touch computer mounting devices.
! Warning
Please use the correct screws! The distance between the back cover surface and the bottom of the
screw hole is 8 mm. Please use four M4 diameter screws with 8 mm length to mount the touch
computer.
! Mise en garde
Veuillez utilizer les vis correcte! La distance entre la surface du capot arrière et le fond du trou de vis
est de 8 mm. Veuillez utilizer quatre vis de diamètre M4 d’une longueur de 8 mm pour mounter le
moniteur.
16
Specifications and Dimensions
Specifications
Item
Category
Specifications
Operating System
Android 13 with MS(EDLA)
Processor
MediaTek MT8390
Dual-core Cortex-A78 up to 2.2GHz
Six-core Cortex-A55 up to 2.0GHz
GPU
Mali-G57 MC3
Memory
8GB
LPDDR4X
Storage
64GB
eMMC
W-Fi
802.11
a/b/g/n/ac/ax
Bluetooth
5.2
Supports BLE
LAN
1 x RJ45
Giga LAN, Support 802.3bt
Camera
Built-in 5MP
Fixed-focus
Communications
Ports
2 x USB
One 3.0 Type-C
One 3.0 Type-A
TF Slot
SDHC3.0
LCD Panel
Size
M1-156IC-AA2:15.6” TFT LCD
M1-215IC-AA2: 21.5” TFT LCD
Resolution
1920 x 1080
Brightness (typical)
M1-156IC-AA2: 382 cd/m2
M1-215IC-AA2: 298 cd/m2
Contrast Ratio (typical)
M1-156IC-AA2: 700:1
M1-215IC-AA2: 3000:1
Viewing Angle (typical)
Horizontal: 178 degrees; Vertical: 178 degrees
Number of Colors
16.7 million
Removeable
Storage Slots
TF
SDHC3.0
SD
Accessory Ports
4 x USB Type-C
with mounting points
For MicroTouch optional accessories only
Audio
Speakers
2 x 2W
17
Item
Category
Specifications
Earphone
Line out & MIC IN
Touch Screen
Touch Type
P-CAP
Simultaneous touch points
Up to 10
Video Output
Type
HDMI Type-A, 4K@60Hz
USB-C DP, 4K@60Hz
Power
Power Adapter Input
AC 100V - 240V (50/60Hz), 50W max
Power Adapter Output
12VDC, 4.16A max
Size and Weight
Dimensions (W x H x D)
Without stand
M1-156IC-AA2:
378.03 mm x 227.34 mm x 32 mm
14.88 in x 8.95 in x 1.26 in
M1-215IC-AA2:
515.44 mm x 306.91 mm x 41 mm
20.30 in x 12.08 in x 1.61 in
Dimensions (W x H x D)
With stand
M1-156IC-AA2:
378.03 mm x 303 mm x 255 mm
14.88 in x 11.9 in x 10.04 in
M1-215P-A-A1/M1-215P-X-XX:
515.44 mm x 342.78 mm x 255 mm
20.30 in x 13.50 in x 10.04 in
Net Weight
M1-156IC-AA2:
2.04 kg without stand, 5.12 kg with stand
4.50 lb without stand, 11.29 lb with stand
M1-215IC-AA2:
3.87 kg without stand, 6.92 kg with stand
8.5 lb without stand, 15.26 lb with stand
Mounting
VESA Mount
100 mm x 100 mm
Environment
Compliance
CE, FCC, LVD, UL/cUL, CB, RoHS, UKCA, RCM
Operating Temperature
0°C - 40°C
Storage Temperature
-20°C - 60°C
18
Dimensions
M1-156IC-AA2, without stand
Front view
Side View
19
Rear View
20
M1-215IC-AA2, without stand
Front view
Side View
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

MicroTouch M1-156IC Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues