AT&T TL90077 Manuel utilisateur

User’s manual

TL90077

DECT 6.0 expansion handset

for use with AT&T models

TL96457/TL96477/TL96487/

TL96497/TL96547

with BLUETOOTH® wireless technology

Congratulations

on your purchase of this AT&T product. Before using this AT&T

product, please read the Important safety information section on

pages 25-27 of this manual. For complete instructions, please

refer to the manual provided with your TL96457/TL96477/TL96487/

TL96497/TL96547 telephone. You can also visit our website at

telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

This telephone meets the California Energy Commission regulations for

energy consumption. Your telephone is set up to comply with the energy-

conserving standards right out of the box. No further action is necessary.

Model number: TL90077

Type: DECT 6.0 expansion handset

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be

found on the bottom of the telephone base.

Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Telephones identied with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of the

Telecommunications Industry Association. Used under license.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such

marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under

license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade

names are those of their respective owners.

The ENERGY STAR® program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect

our environment. We are proud to supply this product with an

ENERGY STAR® qualied power adapter meeting the latest energy

eciency guidelines.

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in the event warranty service

is necessary.

Battery for

cordless handset

Cordless handset

Charger for cordless

handset with power

adapter installed

Battery

compartment

cover

User’s manual

TL90077

DECT 6.0 expansion handset

for use with AT&T models

TL96457/TL96477/TL96487/TL96497/

TL96547

with BLUETOOTH® wireless technology

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1349

User’s manual

TL90077

DECT 6.0 expansion handset

for use with AT&T models

TL96457/TL96477/TL96487/TL96497/

TL96547

with BLUETOOTH® wireless technology

Table of contents

Getting started

Installation ...............................................................................................................................................1

Quick reference guide .....................................................................................................................2

Charger installation ..........................................................................................................................6

Battery installation and charging ...........................................................................................7

Registration and deregistration

Add and register handsets ........................................................................................................10

Register a handset to your telephone base ..............................................................10

Deregister handsets .......................................................................................................................12

Deregister all handsets from your telephone base ............................................. 12

Appendix

Troubleshooting................................................................................................................................13

Maintenance ....................................................................................................................................... 24

Important safety information .................................................................................................25

Safety information .....................................................................................................................25

Especially about cordless telephones .......................................................................... 26

Precautions for users of implanted cardiac pacemakers ................................27

ECO mode .........................................................................................................................................27

Especially about telephone answering systems ....................................................27

For C-UL compliance .....................................................................................................................28

Mesures de sécurité importantes ................................................................................... 28

FCC Part 68 and ACTA ...................................................................................................................32

FCC Part 15 ........................................................................................................................................... 34

California Energy Commission battery charging testing instructions ........35

Limited warranty ............................................................................................................................. 36

Technical specications .............................................................................................................. 39

DECT 6.0 digital technology ................................................................................................ 39

Telephone operating range .................................................................................................39

Redening long range coverage and clarity ............................................................ 39

HD audio ........................................................................................................................................... 39

Simulated full-duplex handset and base speakerphones .............................. 39

1

See pages 7-9

for easy instructions.

You must install and

charge the battery before

using the telephone.

STOP!

Installation

Your product may be shipped with a protective sticker covering the

handset display - remove it before use.

For customer service or product information, visit our website at

telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Avoid placing the charger too close to:

f Communication devices such as television sets, VCRs, or other

cordless telephones.

f Excessive heat sources.

f Noise sources such as a window with trac outside, motors,

microwave ovens, refrigerators, or uorescent lighting.

f Excessive dust sources such as a workshop or garage.

f Excessive moisture.

f Extremely low temperature.

f Mechanical vibration or shock such as on top of a washing

machine or workbench.

Getting started

Quick reference guide

Getting started

2

CHARGE light

f On when the handset is charging

in the telephone base or charger.

VOICE

f Press to activate the voice-

controlled application of

connected cell phone.

PUSH TO TALK

f Press to initiate a one-to-one or

one-to-group broadcast.

f Press and hold to broadcast to a

group of system devices.

CELL 1/ CELL 2

f Press to make or answer a cell

call.

f During a call, press to answer

an incoming CELL 1/2 call when

you hear a call waiting alert.

DIR/VOLUME

f Press to show directory entries

when the telephone is not in

use.

f Press to scroll up while in a

menu.

f Press to increase the listening

volume when on a call, or

increase the message playback

volume.

f While entering names or

numbers, press to move the

cursor to the right.

Sokeys (2)

f Press to select the menu item

displayed above the key.

f While in a menu, press to select

an item, save an entry or setting,

cancel an operation, or back up to

the previous menu.

Quick reference guide

Getting started

3

CID/VOLUME

f Press to review the caller ID log

when the telephone is not in use.

f Press to scroll down while in a

menu.

f Press to decrease the listening

volume when on a call, or decrease

the message playback volume.

f While entering names or numbers,

press to move the cursor to the

le.

HOME/FLASH

f Press to make or answer a home

call.

f During a call, press to answer an

incoming home call when you

receive a call waiting alert.

f During message playback, press

to call back the caller if the caller’s

number is available.

OFF/CANCEL

f During a call, press to hang up.

f While in a menu, press to

cancel an operation, back up

to the previous menu, or exit

the menu display; or

press and hold this button to

exit to idle mode.

f When the handset is ringing,

press to mute the ringer

temporarily.

1

f While reviewing a caller ID

log entry, press repeatedly to

add or remove 1 in front of

the telephone number before

dialing or saving it in the

directory.

f Press and hold to set or to dial

your voicemail number.

Quick reference guide

Getting started

4

TONE /a>A

f Press to switch to tone dialing

temporarily during a call if you

have pulse service.

f While entering names, press

to change the next letter to

upper or lower case.

QUIET# (pound key)

f Press repeatedly to display

other dialing options when

reviewing a caller ID log entry.

f Press and hold to enter the

QUIET mode setting screen, or

to deactivate QUIET mode.

/SPEAKER

f Press to make or answer

a home call using the

speakerphone.

f Press to answer a cell call using

the speakerphone.

f Press to switch between

the speakerphone and the

handset.

MUTE/DELETE

f During a call, press to mute the

microphone.

f When the handset is ringing, press to

mute the ringer temporarily.

f While reviewing the redial list,

directory, caller ID log, allow list, block

list, or the star name list, press to

delete an individual entry.

f While predialing, press to delete digits.

f During message or announcement

playback, press to delete the

playing message or the recorded

announcement.

REDIAL/PAUSE

f Press repeatedly to view the last 10

numbers dialed.

f While entering numbers, press and

hold to insert a dialing pause.

CALL BLOCK

f Press to block the incoming call

when the telephone is ringing or

during the call.

f When the handset is not in use,

press to show the Smart call blocker

menu.

Quick reference guide

Getting started

5

For complete instructions, refer to the manual provided with your

TL96457/TL96477/TL96487/TL96497/TL96547 telephone system.

If you are unable to nd your manual, go to

telephones.att.com/manuals to read and/or download the

manual.

Main menu

The selected menu item is

highlighted.

Menu

Feature menu

f Play messages

f Answering sys

f Smart call blk

f Directory

f Caller ID log

f Intercom

f Ringers

f Set date/time

f Caller ID annc

f Settings

Using menus:

1. Press MENU in idle mode (when the telephone is not in use) to

enter the main menu.

2. Press CID or DIR to scroll through menu items.

3. Press SELECT to select or save the highlighted item.

-OR-

Press BACK or OFF/CANCEL to cancel an operation, back up

to the previous menu, or exit the menu display.

IMPORTANT INFORMATION

1. Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. The power adapter is intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

6

Charger installation

Install the charger, as shown below.

Getting started

Plug the power adapter into a power

outlet not controlled by a wall switch.

7

Battery installation and charging

Install the battery, as shown on page 8. Once you have installed

the battery, the screen indicates the battery status (see the

following table). If necessary, place the handset in the telephone

base or charger to charge the battery. For best performance, keep

the handset in the telephone base or charger when not in use. The

battery is fully charged aer 11 hours of continuous charging. See

the table on page 39 for battery operating times.

If the screen is blank or shows Place in charger and a ashing ,

you need to charge the handset without interruption for at least 30

minutes to give the handset enough charge to use the telephone

for a short time. When the battery is low, the handset shows Low

battery and a ashing . If you are on a call in low battery mode,

the handset beeps every minute.

The following table summarizes the battery charge indicators and

actions to take.

Battery indicators Battery status Action

The screen is blank or

shows Place in charger

and ashes.

The battery has no or

very little charge. The

handset cannot be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and

ashes.

Battery has enough

charge to be used for a

short time.

Charge without interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery charged,

place it in the telephone

base or charger when not

in use.

Getting started

Battery installation and charging

Getting started

8

1. Plug the battery connector securely into the socket inside the

handset battery compartment. Insert the supplied battery with

the label THIS SIDE UP facing up, as indicated.

THIS SI

DE

UP

/

C

E

CÔ

TÉ VE

RS LE

HAUT

2. Align the cover at against the battery compartment, then slide

it upwards until it clicks into place.

VERS LE

HAUT

IMPORTANT INFORMATION

1. Use only the supplied rechargeable battery or replacement battery

(model BT183342/BT283342). To order, visit our website at

telephones.att.com or call 1 (800) 222-3111. In Canada,

dial 1 (866) 288-4268.

2. If you do not use the handset for a long time, disconnect and remove

the battery to prevent possible leakage.

Battery installation and charging

Getting started

9

3. Charge the handset by placing it face forward in the telephone

base or charger. The CHARGE light on the top of the handset is

on during charging.

To replace the battery, press

the tab and slide the battery

compartment cover downwards.

Li out the old battery and

disconnect it from the handset.

Follow the instructions to install

and charge a new battery.

VERS LE

HAUT

Add and register handsets

Before using a new TL90077 handset, make sure it is registered

with an AT&T TL96457/TL96477/TL96487/TL96497/TL96547

telephone system (purchased separately). These telephone

systems can support up to 12 handsets.

The handset(s) provided with your telephone system are already

registered as HANDSET 1, and so forth. Additional handsets are

assigned numbers in the sequential order they are registered

(up to HANDSET 12). Each handset must be registered to the

telephone base before use.

Register a handset to your telephone base

Method 1:

1. Before you begin registration, make sure the handset is out of the

telephone base or charger and shows To register, see

user manual.

2. Put the handset you wish to register on the telephone base cradle.

Registration and deregistration

10

3. The handset shows Registering... Please wait. If the

registration is successful, both the handset and the telephone

base screens display HANDSET X Registered (HANDSET

represents the handset name, X represents the handset

number). Both the handset and the telephone base beep. The

handset is now registered with the telephone base.

For registration, put the handset on the

telephone base, not the handset charger.

Add and register handsets

If registration fails, the system will automatically try to register

again. If registration fails aer the third try, Registration failed

appears on both screens. The handset shows To register, see user

manual and the telephone base returns to idle mode. This may

take up to ve minutes to occur. Please start again from Step 1.

Method 2:

1. Press and hold /FIND HS on the telephone base for about four

seconds and it shows Registering... Please wait. Release

/FIND HS.

2. Press QUIET # on the handset. The handset shows Registering...

Please wait. If the registration is successful, both the handset

and the telephone base screens display HANDSET X Registered

(HANDSET represents the handset name, X represents the

handset number). Both the handset and the telephone base

beep. The handset is now registered with the telephone base.

If registration fails, Registration failed appears on both screens.

The handset shows To register, see user manual and the telephone

base returns to idle mode. Please start again from Step 1.

Notes:

f You cannot register a handset if any other system handset is in use.

f If you try to register more than 12 handsets to the telephone base, the telephone base shows

Registration slots are full and sounds two beeps.

Registration and deregistration

11

If it is the rst time you install your AT&T

TL96457/TL96477/TL96487/TL96497/TL96547

telephone system, or power returns following a

power outage, the handset will prompt you to set

the date and time when registration is successful.

Aer that, it will prompt if you want to set up

Smart call blocker* and the answering system via

voice guides. Press YES on the handset to start.

For details, see the corresponding sections in the

telephone system’s user’s manual. To skip these

settings, press OFF/CANCEL on the handset.

Start voice

guide to set

up Answering

system now?

NO

YES

Start voice

guide to set

up Smart call

blocker now?

NO

YES

* Includes licenced Qaltel

TM

technology.

Qaltel

TM

is a trademark of Truecall Group Limited.

Deregister handsets

You may need to deregister your handsets if:

f You have 12 registered handsets and need to replace a handset.

-OR-

f You wish to change the designated handset number of your

registered handsets.

You must rst deregister ALL handsets, and then register each

handset you wish to use again, one at a time.

Please read carefully through all the instructions on this page

before beginning the deregistration process.

Deregister all handsets from your telephone base

In addition to the cordless handsets, this operation will also

deregister all cordless headsets and speakerphones registered to

your telephone base.

1. Make sure that all handsets are out of the telephone base and

chargers before you begin deregistration.

2. Press and hold /FIND HS on the telephone base for about

10 seconds. The telephone base screen shows Registering...

Please wait for ve seconds, then it shows Deregister all

devices?. Release /FIND HS.

3. Immediately press /FIND HS again or press YES. You must press

/FIND HS or YES within ve seconds. If the telephone base

returns to idle screen, start again with Step 1.

4. The telephone base shows Deregistered all devices when the

registration completes. It takes up to 10 seconds to complete the

deregistration process. Before registering the handset again, wait for

the cordless handset screen to display To register, see user manual.

5. To register the handset(s) to the telephone base again, follow

the registration instructions on the pages 10-11.

Notes:

f If the deregistration fails, you may need to reset the system and try again. To reset, unplug the power

from the telephone base and plug it back in.

f You cannot deregister the handset(s) if any other system handset is in use.

f Even if the battery is depleted, you can still deregister the handset by following the steps mentioned

above. After the handset is charged for at least 10 minutes, the screen shows To register, see user

manual.

Registration and deregistration

12

Troubleshooting

If you have diculty with your phone, please try the following

suggestions. For Customer Service, visit our website at

telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

The handset registration is unsuccessful.

f Follow the handset registration instructions to register the handset

again (see Add and register handsets on pages 10-11).

My telephone doesn’t work at all.

f Make sure the power cord is securely plugged in.

f Make sure you plug the battery connector securely into the

cordless handset.

f Make sure you plug the telephone line cord securely and rmly

into the telephone base and the telephone wall jack.

f Charge the battery in the cordless handset for at least 11 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

f If the battery is depleted, it might take approximately 30 minutes

to charge the handset before it shows Low battery. See page

7 for details.

f Reset the telephone base. Unplug the electrical power. Wait for

approximately 15 seconds, then plug it back in. Allow up to one

minute for the cordless handset and telephone base to reset.

f You may need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages

7-9.

Appendix

13

The remote voice control feature does not work.

f Make sure the operating system of your cell phone is iOS 8 or

later, or Android® 4 or later.

f Make sure your cell phone is paired and connected to your

TL96457/TL96477/TL96487/TL96497/TL96547 telephone

system via Bluetooth.

f Make sure no Bluetooth applications are running in the

background of your cell phone.

f Keep your cell phone within 15 feet of the telephone base.

f Do not lock up your cell phone’s screen or set passcode for

activating the voice-controlled application (voice app), such as

Siri®, Google Now

TM

and S Voice®.

f Make sure you have turned on or logged in to the applications

on your cell phone that you will be sending your voice

commands, such as GPS, e-mail and social networking accounts.

f Make sure your cell phone’s data or Wi-Fi signal is in full strength

and your cell phone can connect to the Internet.

f Try to activate the voice app on your cell phone to ensure it is in

place.

f Once you have activated the remote voice control feature, you

are using your cell phone’s voice app to operate your cell phone.

If the voice commands do not work, please check the cell phone

user’s manual and the voice app’s help topics to nd out what

commands you can use and any limitations of the voice app.

Troubleshooting

Appendix

14

Android® is a registered trademark of Google Inc.

Google Now

TM

is a trademark of Google Inc.

Siri®

is a registered trademark of Apple Inc.

S Voice® is a registered mark of Samsung Electronics Co., Ltd.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries

and is used under license.

Troubleshooting

Appendix

15

f Some cell phone manufacturers or network carriers may

customize the phone’s operating system and implement

their own voice app. If you want to use Google Now, you need

to manually set it as your default voice app. For detailed

instructions, refer to your cell phone user’s manual, or contact

your cell phone’s manufacturer or network carrier. You may also

go to “Google Product Forums” on the Internet and check the

corresponding help topics.

f Due to the settings of certain cell phones and voice apps, your

cell phone may not support the remote voice control feature.

Contact your cell phone’s manufacturer or network carrier, or

check the voice app’s help topics if you encounter any problems.

The remote voice control feature ends unexpectedly while it is

in use.

f The Bluetooth function of your cell phone may be o, or you

may have moved your cell phone out of Bluetooth range of the

telephone base. Make sure the Bluetooth function of your cell

phone is turned on and keep your cell phone within 15 feet of

the telephone base.

f The data or Wi-Fi connection of your cell phone may be lost. Make

sure your cell phone’s data or Wi-Fi signal is in full strength.

f The feature may be ended automatically by your cell phone. For

example, a cell call has been established via the remote voice

control feature and the call has just ended.

f If you receive a landline or cell line incoming call when you have

activated remote voice control on a connected cell phone, the

remote voice control operation will be ended.

f The voice-controlled application of your cell phone may be

aected by other cell phone operations in the background. If the

problem persists, contact your cell phone’s network carrier.

Troubleshooting

Appendix

16

I cannot dial out.

f Try all the suggestions mentioned above.

f Make sure you have a dial tone before dialing. The handset may

take a second or two to nd the telephone base and produce a

dial tone. This is normal. Wait an extra second before dialing.

f Eliminate any background noise. Noise from a television, radio or

other appliances may cause the phone to not dial out properly.

If you cannot eliminate the background noise, rst try muting

the handset before dialing, or dialing from another room in your

home with less background noise.

f Disconnect the telephone base from the telephone wall jack and

plug in a working telephone. If the other phones in your home

are having the same problem, the problem is in your wiring or

telephone service. Contact your telephone service provider

(charges may apply).

The display shows No home line. I cannot get a dial tone.

f Try all the suggestions mentioned above.

f If the previous suggestions do not work, disconnect the

telephone line cord from your telephone and connect the

telephone line cord to another telephone.

f If there is no dial tone on that other telephone either, your

telephone line cord may be defective. Install a new telephone

line cord.

f If changing the telephone line cord does not help, the wall

jack (or the wiring to this wall jack) may be defective. Try using

a dierent wall jack in your home to connect your TL96457/

TL96477/TL96487/TL96497/TL96547 telephone, or contact

your telephone service provider (charges may apply).

La page charge ...

AT&T TL90077 Manuel utilisateur

AT&T TL90077 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents