AT&T TL86103 Guide de démarrage rapide

Marque: AT&T

Modèle: TL86103

Catégorie: Téléphones

Taper: Guide de démarrage rapide

Quick start guide

TL86103

DECT 6.0 2-line

corded/cordless telephone/

answering system with

BLUETOOTH® wireless technology

Congratulations

on your purchase of this AT&T product. Before using this AT&T product, please read

the Important safety information section on pages 1-3 of this manual.

Both the model and serial numbers of your AT&T product can be found on the

bottom of the telephone base. Save your sales receipt and original packaging in

case it is necessary to return your telephone for warranty service.

For customer service, please visit our website at https://telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Parts checklist

Your telephone package contains the following items.

Power adapter for

telephone base

Telephone baseQuick start guide

Cordless handset

Please refer to the online TL86103 DECT 6.0 2-line corded/cordless

telephone/answering system with BLUETOOTH® wireless technology

Complete user’s manual for a full set of installation and operation

instructions at https://telephones.att.com/manuals.

Corded handset with

coiled handset cord

attached

Charger for cordless

handset

Power adapter for

handset charger

Battery for cordless

handset

Battery compartment

cover

Belt clip for

cordless handset

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1349

Telephone line cords

(one black and one clear)

Quick start guide

TL86103

DECT 6.0 2-line

corded/cordless telephone/

answering system with

BLUETOOTH® wireless technology

Important safety information

This symbol is to alert you to important operating or servicing instructions

that may appear in this user’s manual. Always follow basic safety precautions

when using this product to reduce the risk of injury, re, or electric shock.

Safety information

f Read and understand all instructions in the user’s manual. Observe all markings on

the product.

f Avoid using a telephone during a thunderstorm. There may be a slight chance of

electric shock from lightning.

f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or

when the handset is replaced in its cradle. This is a common event associated with

the closing of any electrical circuit. In an inadequately ventilated environment,

the user should not plug the phone into a power outlet, nor put a charged

handset into the cradle where there are concentrations of ammable or ame-

supporting gases. A spark in such an environment could create a re or explosion.

Such environments might include: medical use of oxygen without adequate

ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural

gas; etc.

f Do not use this product near water or when you are wet. For example, do not use

it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink

and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product

comes in contact with any liquid, unplug any line or power cord immediately. Do not

plug the product back in until it has dried thoroughly.

f Install this product in a protected location where no one can trip over any line or

power cords. Protect cords from damage or abrasion.

f If this product does not operate normally, see the Troubleshooting section of the

online Complete user’s manual. If you cannot solve the problem, or if the product

is damaged, refer to the Limited warranty section (pages 36 - 38). Do not

open this product except as directed in your user’s manual. Opening the product or

reassembling it incorrectly may expose you to hazardous voltages or other risks.

f Replace batteries, only as described in your user’s manual (Page 6). Do not burn

or puncture batteries — they contain caustic chemicals.

f This power adapter is intended to be correctly oriented in a vertical or oor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling or an under-the-table/cabinet outlet.

f For pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

Important safety information

CAUTIONS:

f Use only the power adapter provided with this product. To obtain a replacement,

visit our website at https://telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

f U

se only the supplied rechargeable battery or replacement battery (model

BT183342/

BT283342).

To order, visit our website at

https://telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

CAUTION: To prevent risk of re or battery explosion, replace with

the correct battery type. Dispose of used batteries according to the

instructions.

Especially about cordless telephones

f Privacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment within

range of the cordless handset. For this reason, you should not think of cordless

telephone conversations as being as private as those on corded telephones.

f Electrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged,

switched o or if the electrical power is interrupted.

f Potential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will oen reduce or eliminate the

interference.

f Rechargeable batteries: This product contains nickel-metal hydride rechargeable

batteries. Exercise care in handling batteries in order not to create a short

circuit with conductive material such as rings, bracelets, and keys. The battery or

conductor may overheat and cause harm. Observe proper polarity between the

battery and the battery charger.

f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture. Like other batteries of this type, if burned or

punctured, they could release caustic material which could cause injury.

The RBRC Seal means that the manufacturer is voluntarily

participating in an industry program to collect and recycle nickel-

metal hydride rechargeable batteries when taken out of service

within the United States. These batteries may be taken to a

participating local retailer of replacement batteries or recycling

center. You may call 1-800-8-BATTERY® for locations accepting

spent Ni-MH batteries.

The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of

Call2recycle, Inc.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food and

Drug Administration, WTR recommends to physicians that:

Pacemaker patients:

f Should keep wireless telephones at least six inches from the pacemaker.

f Should NOT place wireless telephones directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

f Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from

other persons using wireless telephones.

ECO mode

This power conserving technology reduces power consumption for optimal battery

performance. The ECO mode activates automatically whenever the handset is

synchronized with the telephone base.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to inform the other

party that the call is being recorded. To ensure that you are in compliance with any

federal or state regulations regarding recording a telephone call, you should start

the recording process and then inform the other party that you are recording the

conversation.

SAVE THESE INSTRUCTIONS

Important safety information

Install

Telephone base

Notes:

f Plug one end of the telephone line cord into a telephone jack or a DSL lter.

f If you have DSL high-speed Internet service, a DSL lter (not included) is required.

Option 1: If you have separate wall jacks for each line, plug the telephone lines, as

shown below.

Install

Telephone base

Charger

Caution: Use only the power adapter(s)

provided with this product. To obtain a

replacement, visit our website at

https://telephones.att.com

or call 1 (800) 222-3111. In Canada,

dial 1 (866) 288-4268.

Option 2: If you have a 2-line wall jack, plug the 4-conductor black telephone line,

as shown below.

Battery

Install the battery, as shown below.

Caution: Use only the supplied rechargeable battery or replacement battery

(model BT183342/BT283342).

Install

Charge the cordless handset by placing it face forward in the charger. The

CHARGE light on the top of the handset is on during charging. Charge your

handset(s) before initial use. The battery is fully charged aer 11 hours of

continuous charging.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BA

TTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

CR1349

THIS SIDE UP

THIS SIDE UP / CE CÔTÉ VERS LE HA

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING /

AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERI

ES.

NE PA

S INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

CR1349

Install

Belt clip & optional cordless handset

To attach the belt clip:

Snap the belt clip into the

slots on both sides of the

cordless handset.

To remove the belt clip:

Gently li either of the

belt clip tabs outwards to

remove the belt clip from

the handset.

For handsfree telephone conversations, you can use any industry standard 2.5 mm

headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To

purchase a headset, visit our website at https://telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Li the plastic

cover here.

Plug a 2.5 mm headset

(not included) into the jack

on the side of handset

(beneath the small plastic

cover).

Handset overview

Handset

Headset jack Ì Plug a 2.5 mm headset (not included) into the jack for

handsfree telephone conversations.

CHARGE light Ì Steadily on when the handset is charging in the

charger.

Sokeys (2) Ì Press to select the menu item displayed above the

key).

Ì While in a menu, press to select an item or save an

entry or setting.

A CELL/

B CELL

Ì Press to make or answer a cell call.

Ì During a cell call, press to answer an incoming cell A or

cell B line call when you receive a call waiting alert.

HOLD

Ì During a call, press to put the current call on hold.

Handset

DIR/

VOLUME

Ì Press to show directory entries when the telephone is

not in use.

Ì Press to scroll up while in menus.

Ì While entering names or numbers in the directory,

press to move the cursor to the right.

Ì Press to increase the listening volume when on a call,

or to increase the message playback volume.

CID/

VOLUME

Ì Press to show the caller ID log when the telephone is

not in use.

Ì Press to scroll down while in menus.

Ì While entering names or numbers in the directory,

press to move the cursor to the le.

Ì Press to decrease the listening volume when on a call,

or to decrease the message playback volume.

OFF/CANCEL Ì During a call, press to hang up.

Ì While in a menu, press to cancel an operation, return to

the previous menu, or exit the menu display. You can

also press and hold this button to return to idle mode.

Ì When the handset is ringing, press to mute the ringer

temporarily.

Ì Press and hold while the telephone is not in use to

erase the missed call indicator.

LINE 1/

FLASH/LINE

2/FLASH

Ì Press LINE 1/FLASH to make or answer a call on line 1.

During a call, press to answer an incoming call on line 1

when you receive a call waiting alert.

Ì Press LINE 2/FLASH to make or answer a call on line 2.

During a call, press to answer an incoming call on line 2

when you receive a call waiting alert.

Ì While reviewing a caller ID log entry, press repeatedly

to add or remove 1 in front of the telephone number

before dialing or saving it in the directory.

Ì Press and hold to set or dial your voicemail number.

Handset overview

Handset

TONE /a>A

Ì Press to switch to tone dialing temporarily during a call

if you have pulse service.

Ì Press to switch between upper case and lower case

while entering characters.

QUIET #

(pound key)

Ì Press repeatedly to display other dialing options when

reviewing a caller ID log entry.

Ì Press and hold to enter the QUIET mode setting

screen, or to deactivate QUIET mode.

Ì Press to toggle the name order when saving a caller ID

log entry into directory.

/SPEAKER

Ì Press to make a call on line 1 or line 2 using the

handset speakerphone.

Ì Press to answer a call on line 1 or line 2, cell A, or cell B

line using the handset speakerphone.

Ì Press to switch between the handset speakerphone

and the normal cordless handset use during a call.

MUTE/

DELETE

Ì During a call, press to mute the microphone.

Ì While the telephone base is ringing, press to mute the

ringer temporarily.

Ì While reviewing the redial list, directory, or caller ID log,

press to delete an individual entry.

Ì While predialing, press to delete digits.

Ì While entering or editing a directory entry, press to

erase a digit or character; or press and hold to erase all

digits or characters.

REDIAL/

PAUSE

Ì Press repeatedly to view the last 10 numbers dialed.

Ì While entering numbers, press and hold to insert a

dialing pause.

PUSH TO

TALK

Ì Press to initiate a one-to-one or one-to-group

broadcast.

Ì Press and hold to broadcast to a group of system

devices.

Handset overview

Telephone base

CANCEL

Ì While in a menu, press to exit without making

changes; or press and hold to return to idle

mode.

Ì Press and hold while the telephone is not in

use to erase the missed call indicator.

Sokeys (2)

Ì Press to select the menu item displayed above

the key.

CID

Ì Press to scroll down while in a menu.

Ì Press to review the caller ID log when the

telephone is not in use.

DIR

Ì Press to scroll up while in a menu.

Ì Press to show directory entries when the

telephone is not in use.

Telephone base overview

Telephone base

REDIAL/PAUSE

Ì Press repeatedly to view the last 10 numbers

dialed.

Ì While entering numbers, press and hold to

insert a dialing pause.

CELL A light

Ì Steadily on when the telephone base is paired

and connected with a Bluetooth device on Cell

A line.

Ì Flash alternately while pairing a Bluetooth

device.

CELL B/

HEADSET light

Ì Steadily on when the telephone base is paired

and connected with a Bluetooth device on Cell

B line.

Ì Flash alternately while pairing a Bluetooth

device.

/REPEAT

Ì Press to repeat a message.

Ì Press twice to play the previous message.

Ì While editing names or numbers, press to

move the cursor to the le.

/DELETE

Ì Press to delete the message currently playing.

Ì When the phone is not in use, press to access

the DELETE OLD MSGS menu.

Ì While entering names or numbers, press to

delete a digit or a character.

Ì While predialing, press to delete a digit.

Ì Press to scroll up while in a menu.

/SKIP

Ì During message playback, press to skip to the

next message.

Ì While editing names or numbers, press to

move the cursor to the right.

/RECORD

Ì Press to record an announcement or a memo.

Ì Press to scroll down while in a menu.

/LINE 1

ANS ON/OFF

/LINE 2

ANS ON/OFF

Ì Press to turn the answering systems of line 1

or line 2 on or o.

Telephone base overview

Telephone base

/LINE 1

MAILBOX

/LINE 2

MAILBOX

Ì Press to play line 1 or line 2 messages.

Ì Press to stop playing line 1 or line 2 messages.

1 LINE/2 LINE

Ì Press to make or answer a call on line 1 or line 2.

Ì Flashes slowly when a call on line 1 or line 2 is

on hold.

Microphone

Ì While reviewing a caller ID log entry, press

repeatedly to add or remove 1 in front of the

telephone number before dialing or saving it in

the directory.

Ì Press and hold to set or dial your voicemail

number.

TONE /a>A

Ì Press to switch to tone dialing temporarily

during a call if you have pulse service.

Ì Switch between upper case and lower case

while entering characters.

QUIET #

(pound key)

Ì Press repeatedly to display other dialing

options when reviewing a caller ID log entry.

Ì Press and hold to enter the QUIET mode

setting screen, or to deactivate QUIET mode.

SPEAKER

Ì Press to make a call on line 1 or line 2 using the

speakerphone.

Ì Press to answer a call on line 1, line 2, cell A, or

cell B line using the speakerphone.

Ì Press to switch between the corded handset

and speakerphone.

CELL A /CELL

Ì Press to make or answer a cell call.

Ì During a cell call, press to answer an incoming

call when you receive a call waiting alert.

Ì Flashes quickly when there is an incoming cell

call.

Ì Flashes slowly when a cell call is on hold.

Telephone base overview

Telephone base

HOLD

Ì During a call, press to put the current call on

hold.

/VOLUME/

Ì Press to adjust the volume during message

playback.

Ì Press to adjust the listening volume during a

call.

Ì When the phone is not in use, press to adjust

the telephone base ringer volume for all lines.

FLASH Ì During a call on line 1 or line 2, press to answer

an incoming call on the other line when you

receive a call waiting alert.

PTT Ì Press to initiate a one-to-one or one-to-group

broadcast.

Ì Press and hold to broadcast to a group of

system devices.

USB charging

ports

Ì Two standard size USB ports in the telephone

base for charging your cell phones.

Initial basic settings

Line power mode (no AC power)

This telephone provides minimal functionality during a power failure. When AC

power is not available, the screen is blank and many telephone features do not

function. Only touch-tone dialing and corded handset volume adjustment are

supported. The telephone uses power from the telephone line to enable you to

make and answer calls on Line 1 only using the corded handset and dialing keys.

Aer you install your telephone or the power returns following a power outage, the

telephone base or cordless handset will prompt you to set the date and time. To

skip setting the date and time, press CANCEL or BACK on the telephone base, or

press OFF/CANCEL or BACK on the corded handset.

We recommend you program your telephone system before use. The following

are a few examples of common features to set before using the telephone. Refer to

the Handset and telephone base settings and Answering system settings in the

Complete user’s manual for detailed instructions on setting all telephone features.

Date and time

Note: Set the date/time before using the answering system.

Using a cordless handset or the telephone base:

1. Press MENU -> Press q/p to Set date/time -> Press SELECT.

2. Enter the month (MM), day (DD) and year (YY) -> Press NEXT.

3. Enter the hour (HH) and minute (MM).

4. Press q/p to choose AM or PM -> Press SAVE.

Add a Bluetooth

cell phone/headset

Note: Your TL86103 is compatible with Bluetooth version 2.0 or above devices.

To use a Bluetooth enabled cellular phone or headset with your telephone, you

must rst pair and connect your Bluetooth cellular phone or headset with the

telephone base.

Bluetooth wireless technology operates within a short range (up to 30 feet). Keep

the connected device within 15 feet of the telephone base for optimal performance.

To pair and connect a cell phone using the telephone base:

1. Press MENU -> Press q/p to Bluetooth -> Press SELECT.

2. Press SELECT to select Add device.

3. Press SELECT to select Add cellular.

4. Disconnect the cell phone from any Bluetooth device -> Press NEXT.

5. Place the cell phone next to the telephone base.

6. Press NEXT to turn on the telephone base discoverable mode.

7. Turn on the Bluetooth feature of your cell phone and search for or

add new devices. Once your cell phone nds your AT&T phone

(AT&T DECT 6.0), press the appropriate key on your cell phone to

continue the pairing process.

f Enter the cell phone passcode (typically 0000), if required -> SET.

f Enter the PIN (default PIN: 0000) of the telephone base into your

cell phone, if required.

To pair and connect a headset using the telephone base:

1. Press MENU -> Press q/p to Bluetooth -> Press SELECT.

2. Press SELECT to select Add device.

3. Press q/p to Add headset -> Press SELECT.

4. Disconnect your headset from any Bluetooth device -> Press NEXT.

5. Set your headset to discoverable mode -> Press NEXT.

6. Press q/p to choose your headset, if required -> Press SELECT.

f Enter the PIN (typically 0000) of your headset, if required, and

press NEXT.

Initial basic settings

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering

system. You can use the preset announcement to answer calls, or replace it with

your own recorded announcement.

Using the telephone base:

1. Press MENU -> Press SELECT to select Answering system.

2. Press q/p to highlight Mailbox 1 or Mailbox 2 -> Press SELECT.

3. Press SELECT to select Announcement.

4. Press SELECT to select Record annc.

5. Speak towards the microphone of the telephone base to record your

announcement and press STOP to end recording.

Number of rings

You can set the answering system to answer an incoming call aer a number of

rings. You can also select toll saver to answer a call aer two rings when you have

new messages, or four rings when you have no new messages. This feature allows

you to check for new messages and avoid paying long distance charges when

calling from out of your local area. By default, the answering system answers an

incoming call aer four rings.

Using the telephone base:

1. Press MENU -> Press SELECT to select Answering system.

2. Press q/p to highlight Mailbox 1 or Mailbox 2 -> Press SELECT.

3. Press q/p to Ans system setup -> Press SELECT.

4. Press q/p to # of rings -> Press SELECT.

5. Press q/p to

choose among 6, 5, 4, 3, 2, or Toll saver -> Press SELECT.

To use voicemail (requires service subscription)

You can save the voicemail number to 1 for easy access. Contact your telephone

service provider for more information and assistance about using your voicemail

service.

To set voicemail number:

Using a cordless handset or the telephone base:

1. Press MENU -> Press SELECT to select Settings.

2. Press q/p to highlight Voicemail # -> Press SELECT.

Initial basic settings

3. Press q/p to highlight Line 1 or Line 2 -> Press SELECT.

4. Enter the voicemail number -> Press SAVE.

To retrieve voicemail messages:

1. Press and hold 1.

2. Press q/p to highlight Line 1 or Line 2 -> Press SELECT.

Ringer volume

You can set the ringer volume level to one of the six levels or turn the ringer o.

Using a cordless handset or the telephone base:

1. Press MENU -> Press q/p to Ringers -> Press SELECT.

2. Press SELECT to select Ringer volume.

3. Press q/p to highlight All lines, Line 1, Line 2, Cell A, Cell B,

or PC call, and then press SELECT .

4. Press q/p to choose the desired level -> Press SET.

LCD language

Using a cordless handset or the telephone base:

1. Press MENU -> Press q/p to Settings -> Press SELECT .

2. Press SELECT to choose LCD language.

3. Press q/p to highlight English, Français or Español -> Press SELECT . The

screen prompts Set English/Français/Español as LCD language?.

4. Press YES

to conrm, or press NO to cancel the operation.

Note: If you accidentally changed the LCD language to French or Spanish, you can reset it back

to English without going through the French or Spanish menus.

f Press MENU on the cordless handset or telephone base in idle mode, and then enter

364#.

f To reset the LCD language back to English during a call, press OPTION on the cordless

handset or telephone base, and then enter 364#.

Initial basic settings

La page charge ...

AT&T TL86103 Guide de démarrage rapide

Marque: AT&T

Modèle: TL86103

Catégorie: Téléphones

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

AT&T TL86103 Guide de démarrage rapide

AT&T TL86103 Guide de démarrage rapide

Documents connexes

Autres documents