VTech DS6771-3 Manuel utilisateur

BC

DS6771-3

DECT 6.0 cordless telephone

with BLUETOOTH

®

wireless

technology

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

the latest VTech product news.

User’s manual

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature

operations and troubleshooting

necessary to install and operate your

new VTech telephone. Please review

this manual thoroughly to ensure

proper installation and operation of

this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com.

In Canada, please visit

www.vtechcanada.com.

Telephones identified with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of

the Telecommunications

Industry Association. Used

under license.

Important safety

instructions

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of fire,

electric shock and injury, including the

following:

Read and understand all instructions.

Follow all warnings and instructions

marked on the product.

Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a

damp cloth for cleaning.

Do not use this product near water

such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming

pool, or in a wet basement or shower.

Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

Avoid placing the telephone system

in places with extreme temperature,

direct sunlight, or other electrical

devices. Protect your phone from

moisture, dust, corrosive liquids and

fumes.

Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or

rug. This product should never be

placed near or over a radiator or heat

register. This product should not be

placed in any area where proper

ventilation is not provided.

This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of power

supply in your home or office, consult

your dealer or local power company.

1.

2.

3.

4.

5.

6.

7.

8.

The ENERGY STAR

®

program (www.energystar.

gov) recognizes and

encourages the use of

products that save energy

and help protect our

environment. We are proud

to mark this product with

the ENERGY STAR

®

label

indicating it meets the latest

energy efficiency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Do not allow anything to rest on

the power cord. Do not install this

product where the cord may be

walked on.

Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

To reduce the risk of electric shock,

do not disassemble this product,

but take it to an authorized service

facility. Opening or removing parts of

the telephone base or handset other

than specified access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling

can cause electric shock when the

product is subsequently used.

Do not overload wall outlets and

extension cords.

Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

When the power supply cord or

plug is damaged or frayed.

If liquid has been spilled onto the

product.

If the product has been exposed

to rain or water.

If the product does not operate

normally by following the

operating instructions. Adjust only

those controls that are covered

by the operation instructions.

Improper adjustment of other

controls may result in damage and

often requires extensive work by

an authorized technician to restore

the product to normal operation.

If the product has been dropped

and the telephone base and/or

handset has been damaged.

If the product exhibits a distinct

9.

10.

11.

12.

13.

•

change in performance.

14. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric

shock from lightning.

15. Do not use the telephone to report

a gas leak in the vicinity of the leak.

Under certain circumstances, a spark

may be created when the adapter

is plugged into the power outlet,

or when the handset is replaced in

its cradle. This is a common event

associated with the closing of any

electrical circuit. The user should not

plug the phone into a power outlet,

and should not put a charged handset

into the cradle, if the phone is

located in an environment containing

concentrations of flammable or

flame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

fire or explosion. Such environments

might include: medical use of

oxygen without adequate ventilation;

industrial gases (cleaning solvents;

gasoline vapors; etc.); a leak of

natural gas; etc.

16. Only put the handset of your

telephone next to your ear when it is

in normal talk mode.

17. The power adapters are intended to

be correctly oriented in a vertical or

floor mount position. The prongs are

not designed to hold the plug in place

if it is plugged into a ceiling,

under-the-table or cabinet outlet.

SAVE THESE INSTRUCTIONS

Battery

CAUTION: Use Only Supplied

Battery.

Do not dispose of the battery in a fire.

Check with local waste management

codes for special disposal instructions.

Do not open or mutilate the battery.

•

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

Charge the battery provided with this

product only in accordance with the

instructions and limitations specified

in this manual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to

digital cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at

least six inches from the pacemaker.

Should NOT place wireless telephones

directly over the pacemaker, such as

in a breast pocket, when it is turned

ON.

Should use the wireless telephone at

the ear opposite the pacemaker.

WTR’s evaluation did not identify any

risk to bystanders with pacemakers

from other persons using wireless

telephones.

About cordless telephones

Privacy: The same features

that make a cordless telephone

convenient create some limitations.

Telephone calls are transmitted

between the telephone base and the

cordless handset by radio waves,

so there is a possibility that the

•

cordless telephone conversations

could be intercepted by radio

receiving equipment within range

of the cordless handset. For this

reason, you should not think of

cordless telephone conversations as

being as private as those on corded

telephones.

Electrical power: The telephone

base of this cordless telephone must

be connected to a working electrical

outlet. The electrical outlet should not

be controlled by a wall switch. Calls

cannot be made from the cordless

handset if the telephone base is

unplugged, switched off or if the

electrical power is interrupted.

Potential TV interference: Some

cordless telephones operate

at frequencies that may cause

interference to televisions and

VCRs. To minimize or prevent

such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often

reduces or eliminates the interference.

Rechargeable batteries: Exercise

care in handling batteries in order

not to create a short circuit with

conducting material such as rings,

bracelets and keys. The battery or

conductor may overheat and cause

harm. Observe proper polarity

between the battery and the battery

charger.

Nickel-metal hydride rechargeable

batteries: Dispose of these batteries

in a safe manner. Do not burn or

puncture the battery. Like other

batteries of this type, if burned or

punctured, they could release caustic

material which could cause injury.

•

Table of contents

What’s in the box.........................1

Overview ......................................2

Telephone base overview ...................2

Handset overview ...............................3

Headset overview ...............................4

Charger overview ...............................5

Display icons overview .......................5

Telephone base lights overview .........6

Handset lights overview ......................6

Headset lights and alert tones

overview ..........................................6

Connect ........................................7

Connect the telephone base ...............7

Connect the charger ...........................7

Install the battery ................................8

Check the battery level .......................8

Charge the battery ..............................9

Position the headset .................10

Replace the pre-installed earbud

and earhook ..................................10

Adjust the headset to wear on the ear ...

11

Over the head band ..........................11

Before use ..................................12

Set date and time ............................12

Set answering system through

voice guide ....................................12

Check for dial tone ............................13

Operating range ................................13

Bluetooth ....................................13

Glossary of terms ............................14

Bluetooth setup .................................15

VTech Connect to Cell

TM

application ... 16

Add a Bluetooth enabled cell phone ... 16

Add a Bluetooth enabled headset ....17

Auto connection ................................18

Connect a paired cell phone or

headset .........................................18

Disconnect a paired cell phone or

headset .........................................18

Review the cell devices list ...............18

Download phonebook contacts ........18

Remote voice control ................20

Activate remote voice control on

handset .........................................21

Activate remote voice control on

headset .........................................21

Configure your telephone ........22

Using the handset menu ...................22

Set language ....................................22

Set date and time .............................23

Home area code ...............................23

Dial mode .........................................24

Temporary tone dialing .....................24

Telephone Operations ..............24

Make a home call .............................25

Predial a home call ...........................25

Answer a home call ..........................25

End a home call ................................25

Make a cell call .................................25

Predial a cell call ...............................25

Answer a cell call ..............................26

End a cell call ...................................26

Answer a cell call while on

a home call ....................................26

Answer a home call while on

a cell call .......................................26

Speakerphone ..................................26

Volume .............................................26

Mute ..................................................27

Join a call in progress .......................27

Call waiting on the home line ............27

Call waiting on the cell line ...............27

Chain dialing .....................................27

Find handset .....................................28

Redial list ..................................28

Review a redial list entry ...................28

Dial a redial list entry ........................28

Delete a redial list entry ....................28

Multiple handset use .................29

Intercom ............................................29

Answer an incoming call during

an intercom call .............................29

Call transfer using intercom ..............29

Phonebook .................................30

Add a phonebook entry ....................30

Review phonebook entries ...............31

Alphabetical search ..........................31

Delete a phonebook entry ................32

Delete all phonebook entries ............32

Edit a phonebook entry .....................32

Dial a phonebook entry .....................32

Caller ID ......................................33

Review the caller ID log ....................33

Memory match ..................................33

Missed call indicator .........................34

View dialing options ..........................34

Dial a caller ID log entry ...................35

Save a caller ID log entry to the

phonebook ....................................35

Delete a caller ID log entry ...............35

Delete all caller ID log entries ...........35

Call block ...................................36

Block unknown calls .........................36

Add a call block list entry ..................36

Review the call block list ...................36

Edit a call block list entry ..................37

Save a caller ID log entry to the

call block list ..................................37

Delete a call block list entry ..............37

Mute first ring ....................................37

Sound settings .........................38

Key tone ...........................................38

Ringer tone .......................................38

Handset ringer volume .....................38

Telephone base ringer volume .........38

Temporary ringer silencing ...............39

About the built-in answering

system and voicemail service ...

39

Set your built-in answering

system .....................................40

Turn the answering system on or off ....40

Default announcement .....................40

Record your own announcement ......41

Play the announcement ....................41

Delete the announcement ................41

Set number of rings .........................41

Turn the call screening on or off .......42

Message alert tone ...........................42

Voice guide .......................................42

Using your built-in answering

system .....................................43

New message indication ...................43

Message playback ............................43

Delete all old messages ...................44

Remote access .................................44

Set remote access code ...................45

Call screening ...................................45

Call intercept .....................................46

Record, play, and delete memos ......46

Using the built-in answering

system and voicemail service ...

46

Retrieve voicemail from

telephone service ...................47

Retrieve voicemail ............................47

Set your voicemail number ...............47

Turn off the new voicemail indicators...

47

Cell phone voicemail ........................47

Expand your telephone system ...

48

Screen messages ......................48

ECO mode ..................................50

General product care ................51

Frequently asked questions .....51

The RBRC

®

seal .........................57

FCC, ACTA and IC regulations ...57

California Energy Commission

battery charging testing

instructions .............................59

For C-UL compliance only ........60

Limited warranty........................63

Technical specifications ............ 65

1

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

To purchase replacement batteries or power

adapters, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial

1 (800) 267-7377.

Abridged user’s

manual

Important Safety

Instructions

2

Overview

Telephone base overview

1 –

Headset charging cradle

2 – /PLAY/STOP

• P

ress to play messages.

• P

ress to stop message playback.

/SKIP

• Press to skip to the next

message.

/REPEAT

• Press to repeat a message.

• Press twice to play the previous

message.

X/DELETE

• Press to delete the playing

message.

• When the handset is not in use,

press twice to delete all old

messages.

3 –

+

/VOL/

–

• Press to adjust the volume during

message playback.

• Press to adjust the telephone

base ringer volume when the

handset is not in use.

4 – /ANS ON light

• On when the answering system is

on.

5 – /ANS ON

• Press to turn the answering

system on or off.

6 – CELL 1 and CELL 2

• Press to connect the paired cell

Bluetooth device.

• Press and hold to add or replace

a Bluetooth device.

7 – CELL 1 and CELL 2 lights

• On when the telephone base

is paired and connected with a

Bluetooth device.

• Flashes when the telephone base

is in discoverable mode.

8 – Charging cradle

9 – IN USE light

• On when the handset or headset

is in use, or the answering system

is answering a call.

• Flashes when there is an

incoming call, or another

telephone sharing the same line

is in use.

10 – FIND HANDSET

• Press to page all system

handsets and headset.

h

e

g

b

f

d

c

j

a

i

3

Handset overview

1 – Handset earpiece

2 – LCD display

3 – MENU/SELECT

• Show the menu.

• While in a menu, press to select

an item, or save an entry or

setting.

4 – VOICE

Press to activate the

voice-controlled application on

your connected cell phone.

5 – OFF/CANCEL

Hang up a call.

Silence the ringer temporarily

while the handset is ringing.

Press and hold to erase the

missed call indicator while the

phone is not in use.

Press to return to the previous

menu; or press and hold to

return to idle mode, without

making changes.

•

6 –

Press to add a space when

entering names.

7 –

Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

8 – INT

Press to start an intercom

conversation or transfer a call.

9 – Microphone

10 – MUTE/DELETE

Mute the microphone during a

call.

Delete digits or characters while

using the dialing keys.

Silence the ringer temporarily

while the handset is ringing.

Delete the displayed entry while

reviewing the phonebook, caller

ID log, call block list or redial list.

11 –

• Make or answer a call using the

handset speakerphone.

• During a call, press to switch

between the speakerphone and

the handset.

12 –

• While you have set the dial mode

to pulse and on a call, press to

switch to tone dialing temporarily.

13 –

• Press repeatedly to add or

remove 1 in front of the caller ID

log entry before dialing or saving

it to the phonebook.

• Press and hold to set or dial your

voicemail number.

•

j

k

l

p

r

q

m

n

o

a

b

c

d

e

h

i

f

g

4

14 –

/HOME/FLASH

• Make or answer a home call.

• Answer an incoming home call

when you hear a call waiting

alert.

15 – /CELL

• Make or answer a cell call.

• Answer an incoming cell call

when you hear a call waiting

alert.

16 – REDIAL/PAUSE

• Press repeatedly to review the

redial list.

• Press and hold to insert a dialing

pause while entering a number.

17 –

• Review the phonebook when the

handset is not in use.

• Increase the listening volume

during a call.

• Scroll up while in a menu, or in

the phonebook, caller ID log, call

block list or redial list.

• Move the cursor to the right when

entering numbers or names.

Review the caller ID log when the

handset is not in use.

Decrease the listening volume

during a call.

Scroll down while in a menu, or

in the phonebook, caller ID log,

call block list or redial list.

Move the cursor to the left when

entering numbers or names.

18 – CHARGE light

• On when the handset is

charging.

•

Headset overview

1 – VOL+

• Increase the headset volume.

VOL-

• Decrease the headset volume.

Flash

• While on a call, press and hold

to answer an incoming call when

you receive a call waiting alert.

2 – ON / OFF light

• On when the headset is

charging.

ON / OFF key

• Press to answer or end a call.

3 – Microphone

4 – MUTE

Press to activate the voice-

controlled application on your

connected cell phone when idle.

Mute the microphone during a

call.

When there is an incoming call,

press to silence the ringer in the

earpiece temporarily.

5 – Earpiece

6 – Earhook

•

f

d

e

c

b

a

5

Charger overview

1 – Charging pole

Display icons overview

The battery icon flashes

when the battery is low and

needs charging.

The battery icon animates

when the battery is charging.

The battery icon becomes

solid when the battery is fully

charged.

ECO

The ECO mode activates

automatically to reduce

power consumption when

the handset is within range

from the telephone base.

There are new voicemail

received from your telephone

service provider.

On when the home line is in

use or there is an incoming

home call.

Flashes when there is an

incoming home waiting call.

1

2

There are Bluetooth devices

connected on the cell

devices list.

On when the cell line is in

use or there is an incoming

cell call.

Flashes when there is an

incoming cell waiting call.

NEW

There are new caller ID log

entries.

ANS ON

The answering system is

turned on.

The handset ringer is off.

1/25

The message number

currently playing and

total number of new/old

messages recorded.

a

6

Telephone base lights overview

IN USE

On when the

telephone line is in

use.

On when you

are registering a

handset.

Flashes quickly when

there is an incoming

call.

Flashes when

another telephone

sharing the same line

is in use.

Flashes when you

are deregistering all

handsets.

•

CELL 1/CELL 2

On when a Bluetooth

device is connected

to the base.

Flashes when the

telephone base is in

discoverable mode.

•

/ANS ON/OFF

On when the

answering system is

turned on.

•

Handset lights overview

On when the handset

speakerphone is in

use.

•

CHARGE

On when the handset

is charging in the

telephone base or

handset charger.

•

Headset lights and alert tones

overview

Light status

Alert tones

Red

On when the headset

battery is charging.

Flashes every 10 seconds

when the headset battery is

low and needs charging.

•

Blue

Flashes twice every three

seconds when the headset

is in use.

Flashes every four seconds

when there is an incoming

call.

Flashes every 10 seconds

when the headset is out of

the headset charger and

has enough charge.

•

Red and

blue

Flashes slowly when the

headset is not registered.

Flashes quickly when the

headset is registering to a

telephone base.

•

Off

No battery is installed, or

the headset has run out of

battery.

The headset is powered

off.

•

One short

beep every

30 seconds

The microphone is muted.•

Two low

beeps

Call waiting alert tone.•

Three rising

beeps

A conference call has

started.

•

7

Connect

You can connect the telephone base for

desktop usage.

NOTES

Use only the adapters provided.

Even if you do not subscribe to any

conventional telephone service, you can

pair a Bluetooth enabled cell phone to

your telephone base (see Bluetooth), and

use the cell line alone without plugging in

a telephone line cord.

Make sure the electrical outlets are not

controlled by wall switches.

The adapters are intended to be correctly

oriented in a vertical or floor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL filter (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider

for more information.

•

Connect the telephone base

Connect the charger

8

Install the battery

Install the handset battery

Install the handset battery as shown

below.

NOTES

Use only supplied battery.

If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

•

Install the headset battery

Install the headset battery as shown

below.

NOTE

Use only supplied battery.

Check the battery level

After you have installed the battery,

check the battery level on the handset

screen.

If the battery icon is

, or

, then go

to Before use section to set the date

and time, and set the answering

system through voice guide.

If the screen is blank, or

flashes,

then the battery needs to be

charged. Go to Charge the battery

section before you do any setting or

operation.

•

THIS SIDE UP

9

Charge the battery

Place the handset in the telephone base

or the charger to charge.

Place the headset on the telephone

base to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the table on next

page).

NOTES

Press CANCEL or place the handset in

the telephone base or charger will bypass

the set date and time, and voice guide.

For best performance, keep the handset in

the telephone base or charger when not in

use. Place the headset on the telephone

base when not in use.

The handset battery is fully charged after

12 hours of continuous charging. The

headset battery is fully charged after 3

hours of continuous charging.

If you place the handset in the telephone

base or the charger without plugging

in the battery, the screen displays No

battery.

•

Battery

indicators

Battery

status

Action

The screen

is blank, or

shows Put

in charger

and

flashes.

The battery

has no

charge or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(at least

30 minutes).

The screen

shows Low

battery and

flashes.

The battery

has enough

charge to be

used for a

short time.

Charge

without

interruption

(at least

30 minutes).

The screen

shows

HANDSET

X.

The battery

is charged.

To keep

the battery

charged,

place it in the

telephone

base or

charger when

not in use.

When it is fully charged, you can expect

the following performance:

Operation Operating time

While in handset

use (talking*)

Seven hours

While handset in

speakerphone mode

(talking*)

Three hours

While handset not in

use (standby**)

Five days

While in headset

use (talking*)

Four hours

While headset not in

use (standby**)

Two days

* Operating times vary depending on your actual

use and the age of the battery.

** Handset/headset is not charging or in use.

To manually set the date and time

and the answering system, refer to

Configure your telephone and Set

your built-in answering system

sections.

To manually initiate the voice guide,

refer to Voice guide under Set your

built-in answering system section.

10

Position the headset

There are four earbuds and four

earhooks provided. One earbud and

one earhook have been attached to the

headset.

You can choose a suitable size of

earbud, earhook and an appropriate

way to position your headset.

Replace the pre-installed earbud

and earhook

Hold both sides of the earbud. Twist and

pull the earbud until it separates from the

earpiece.

Rotate the earhook to vertical direction

and then pull the earhook until it

separates from the headset.

1.

2.

Attach a earhook, and then a suitable

earbud to the headset until they fit into

place.

To wear on the right ear:

To wear on the left ear:

4. Wrap the earhook with the sponge.

3.

11

Adjust the headset to wear on

the ear

Hook the headset on your ear. Adjust

the angle of the headset until the

microphone is pointing towards your

mouth. Firmly grip the headset with one

hand whenever adjusting the headset

microphone up or down.

Over the head band

To attach the head band to the

headset:

Refer to Steps 1 and 2 in Replace

the pre-installed earbud and

earhook section to remove the

earbud and earhook.

Attach the headset to the headband.

•

1.

2.

Rotate the headset to vertical direction

until it clicks into place.

Adjust the head band to fit your head.

Adjust and rotate the angle of the

headset until the microphone is pointing

towards your mouth.

3.

4.

12

To remove the head band from

the headset:

Hold the headset with one hand and

the head band with your other hand.

Rotate the headset to horizontal

direction and the pull the headset until

it separates form the head band.

1.

2.

Before use

After you install your telephone or

power returns following a power outage

and battery depletion, the handset will

prompt you to set the date and time,

and the answering system through

voice guide.

Set date and time

NOTE

Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press or to choose AM or PM.

3. Press SELECT to save.

After the setting for the date and time,

the handset will display Voice guide to...

and set up Ans sys? alternatively.

Set answering system through

voice guide

This feature assists you to do the basic

setup of the answering system. You can

follow the voice guide to record your

own announcement, set the number of

rings and the message alert tone.

Press SELECT to start the voice

guide for the answering

system setup. You hear the voice

prompt “Hello! This voice

guide will assist you with the basic

setup of your answering system.”

Setup your answering system by

inputting the designated numbers as

instructed in the voice guide.

•

1.

2.

13

Check for dial tone

Press /HOME. If you hear a dial tone,

the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures

described above are properly done.

It may be a wiring problem. If you

have changed your telephone

service to digital service from a

cable company or a VoIP service

provider, the telephone line may need

to be rewired to allow all existing

telephone jacks to work. Contact your

cable/VoIP service provider for more

information.

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can

vary with the locations of the telephone

base and handset, the weather, and the

layout of your home or office.

When the handset is out of range, the

handset displays Out of range or and

no pwr at base alternately.

If there is a call while the handset is out

of range, it may not ring, or if it does

ring, the call may not connect well when

you press /HOME or /CELL. Move

closer to the telephone base, and then

press /HOME or /CELL to answer

the call. If the handset moves out of

range during a telephone conversation,

there may be interference. To improve

reception, move closer to the telephone

base.

•

Bluetooth

Your new DS6771 telephone system

with Bluetooth wireless technology has

the following features:

Pair and connect up to a maximum

of two cell phones with the telephone

base to make and receive cell calls.

Only one cell phone can be active on

a call at a time.

Make and receive calls using your

cell phone plan while utilizing the

ease and comfort of your home

telephone system.

Receive phonebook entries from your

cell phone.

IMPORTANT INFORMATION

Refer to the user's manual of your

Bluetooth enabled cell phone for

more information about how that

device uses Bluetooth connectivity.

Bluetooth wireless technology

operates within a short range (a

maximum of approximately 15 feet)

from the telephone base. Keep

connected cell phones within this

range. For optimal performance,

place your cell phone next to the

telephone base while using the

DS6771 cell line.

•

The Bluetooth

®

word mark and logos are

owned by Bluetooth SIG, Inc. and any use

of such marks by VTech Holdings Limited

is under license. VTech Holdings Limited

is a member of Bluetooth SIG, Inc. Other

trademarks and trade names are those of

their respective owners.

Maximum of

approximately 15 feet

DS6771

Cellular

signal

14

If your cell phone has poor reception

in your home, the DS6771 cannot

improve the reception. However, if

there is a location in your house with

better reception, you can leave your

cell phone at that location while using

the DS6771 cell line.

If you experience poor sound quality,

place your cell phone closer to the

DS6771 to ensure strong Bluetooth

signal strength. Make sure there are

no physical obstacles between the

DS6771 and the cell phone, such as

large furniture or thick walls.

Charge your cell phone while it

is connected to the telephone

base. Your cell phone's battery will

discharge faster while it is connected

to the telephone base via Bluetooth

wireless technology.

Monitor your cell phone's usage

because minutes are deducted from

your cellular plan for the duration of

all cell calls.

Refer to Bluetooth setup to learn how

to set up and manage your Bluetooth

enabled devices. Refer to Telephone

operation on how to operate your

Bluetooth devices with your new

DS6771 telephone system with

Bluetooth wireless technology. Refer

to Frequently asked questions if you

experience difficulty using the telephone

system.

•

Glossary of terms

Below are some terms used in this

user’s manual to help you become

familiar with using your Bluetooth enabled

cell phone and your new DS6771

telephone system.

Bluetooth cell phone - refers to a

Bluetooth enabled cellular telephone.

Cell line - the telephone line associated

with your cell phone service. On your

DS6771 handset, press /CELL to use

the cell line.

Connected - when you pair a Bluetooth

cell phone to the DS6771, it is

automatically connected. When a cell

phone is connected, 1 and/or 2 displays

after on the handset and the

CELL 1 and/or CELL 2 light on the

telephone base is on. If a cell phone

loses its connection to the telephone

base, it must be reconnected before

you can use the cell phone with the

DS6771.

Disconnected - when a cell phone is

disconnected, the on the handset no

longer displays and the CELL 1 and/or

CELL 2 light on the telephone base is

off.

Discoverable mode - before a

Bluetooth enabled device can be paired,

it must be set to this mode. When

pairing your cell phone, the telephone

base will be set to this mode. Depending

on the manufacturer, this mode is

sometimes referred to as Find Me or

Visibility.

Home line - your conventional

telephone land line. On your DS6771

handset, press /HOME/FLASH to use

the home line.

La page est en cours de chargement...

VTech DS6771-3 Manuel utilisateur

VTech DS6771-3 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents