VTech CS6948-3 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur

Ce manuel convient également à

BC
Go to
www.vtechphones.com
to register your product for
enhanced warranty support
and latest VTech product
news.
User’s manual
CS6948-3
CS6949
CS6949-2
CS6949-3
DECT 6.0 cordless telephone
Congratulations
on purchasing your new VTech product.
Before using this telephone, please read
Important safety instructions.
This manual has all the feature
operations and troubleshooting
necessary to install and operate your
new VTech telephone. Please review
this manual thoroughly to ensure
proper installation and operation of
this innovative and feature rich VTech
product.
For support, shopping, and everything
new at VTech, visit our website at
www.vtechphones.com.
In Canada, please visit
www.vtechcanada.com.
Telephones identified with
this logo have reduced
noise and interference
when used with most T-coil
equipped hearing aids
and cochlear implants.
The TIA-1083 Compliant
Logo is a trademark of
the Telecommunications
Industry Association. Used
under license.
The ENERGY STAR
®
program (www.energystar.
gov) recognizes and
encourages the use of
products that save energy
and help protect our
environment. We are proud
to mark this product with
the ENERGY STAR
®
label
indicating it meets the
latest energy efficiency
guidelines.
Important safety
instructions
When using your telephone equipment,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury, including the
following:
Read and understand all instructions.
Follow all warnings and instructions
marked on the product.
Unplug this product from the wall
outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a
damp cloth for cleaning.
Do not use this product near water
such as near a bath tub, wash bowl,
kitchen sink, laundry tub or swimming
pool, or in a wet basement or shower.
Do not place this product on an
unstable table, shelf, stand or other
unstable surfaces.
Avoid placing the telephone system
in places with extreme temperature,
direct sunlight, or other electrical
devices. Protect your phone from
moisture, dust, corrosive liquids and
fumes.
Slots and openings in the back or
bottom of the telephone base and
handset are provided for ventilation.
To protect them from overheating,
these openings must not be blocked
by placing the product on a soft
surface such as a bed, sofa or
rug. This product should never be
placed near or over a radiator or heat
register. This product should not be
placed in any area where proper
ventilation is not provided.
This product should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the type of power
1.
2.
3.
4.
5.
6.
7.
8.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
supply in your home or office, consult
your dealer or local power company.
Do not allow anything to rest on
the power cord. Do not install this
product where the cord may be
walked on.
Never push objects of any kind into
this product through the slots in the
telephone base or handset because
they may touch dangerous voltage
points or create a short circuit. Never
spill liquid of any kind on the product.
To reduce the risk of electric shock,
do not disassemble this product,
but take it to an authorized service
facility. Opening or removing parts of
the telephone base or handset other
than specified access doors may
expose you to dangerous voltages or
other risks. Incorrect reassembling
can cause electric shock when the
product is subsequently used.
Do not overload wall outlets and
extension cords.
Unplug this product from the wall
outlet and refer servicing to an
authorized service facility under the
following conditions:
When the power supply cord or
plug is damaged or frayed.
If liquid has been spilled onto the
product.
If the product has been exposed
to rain or water.
If the product does not operate
normally by following the
operating instructions. Adjust only
those controls that are covered
by the operation instructions.
Improper adjustment of other
controls may result in damage and
often requires extensive work by
an authorized technician to restore
the product to normal operation.
9.
10.
11.
12.
13.
If the product has been dropped
and the telephone base and/or
handset has been damaged.
If the product exhibits a distinct
change in performance.
14. Avoid using a telephone (othe
r than
cordless) during an electrical storm.
There is a remote risk of electric
shock from lightning.
15. Do not use the telephone to report
a gas leak in the vicinity of the
leak. Under certain circumstances,
a spark may be created when the
adapter is plugged into the power
outlet, or when the handset is
replaced in its cradle. This is a
common event associated with the
closing of any electrical circuit. The
user should not plug the phone
into a power outlet, and should
not put a charged handset into
the cradle, if the phone is located
in an environment containing
concentrations of flammable or
flame-supporting gases, unless there
is adequate ventilation. A spark in
such an environment could create a
fire or explosion. Such environments
might include: medical use of
oxygen without adequate ventilation;
industrial gases (cleaning solvents;
gasoline vapors; etc.); a leak of
natural gas; etc.
16. Only put the handset of your
telephone next to your ear when it is
in normal talk mode.
17. The power adapters are intended to
be correctly oriented in a vertical or
floor mount position. The prongs are
not designed to hold the plug in place
if it is plugged into a ceiling,
under-the-table or cabinet outlet.
SAVE THESE INSTRUCTIONS
Battery
CAUTION: Use Only Supplied
Battery.
Do not dispose of the battery in a fire.
Check with local waste management
codes for special disposal instructions.
Do not open or mutilate the battery.
Released electrolyte is corrosive and
may cause burns or injury to the eyes
or skin. The electrolyte may be toxic if
swallowed.
Exercise care in handling batteries in
order not to create a short circuit with
conductive materials.
Charge the battery provided with this
product only in accordance with the
instructions and limitations specified
in this manual.
Precautions for users of
implanted cardiac pacemakers
Cardiac pacemakers (applies only to
digital cordless telephones):
Wireless Technology Research, LLC
(WTR), an independent research entity,
led a multidisciplinary evaluation of the
interference between portable wireless
telephones and implanted cardiac
pacemakers. Supported by the U.S.
Food and Drug Administration, WTR
recommends to physicians that:
Pacemaker patients
Should keep wireless telephones at
least six inches from the pacemaker.
Should NOT place wireless telephones
directly over the pacemaker, such as
in a breast pocket, when it is turned
ON.
Should use the wireless telephone at
the ear opposite the pacemaker.
WTR’s evaluation did not identify any
risk to bystanders with pacemakers
from other persons using wireless
telephones.
About cordless telephones
Privacy: The same features
that make a cordless telephone
convenient create some limitations.
Telephone calls are transmitted
between the telephone base and the
cordless handset by radio waves,
so there is a possibility that the
cordless telephone conversations
could be intercepted by radio
receiving equipment within range
of the cordless handset. For this
reason, you should not think of
cordless telephone conversations as
being as private as those on corded
telephones.
Electrical power: The telephone
base of this cordless telephone must
be connected to a working electrical
outlet. The electrical outlet should not
be controlled by a wall switch. Calls
cannot be made from the cordless
handset if the telephone base is
unplugged, switched off or if the
electrical power is interrupted.
Potential TV interference: Some
cordless telephones operate
at frequencies that may cause
interference to televisions and
VCRs. To minimize or prevent
such interference, do not place
the telephone base of the cordless
telephone near or on top of a TV or
VCR. If interference is experienced,
moving the cordless telephone farther
away from the TV or VCR often
reduces or eliminates the interference.
Rechargeable batteries: Exercise
care in handling batteries in order
not to create a short circuit with
conducting material such as rings,
bracelets and keys. The battery or
conductor may overheat and cause
harm. Observe proper polarity
between the battery and the battery
charger.
Nickel-metal hydride rechargeable
batteries: Dispose of these batteries
in a safe manner. Do not burn or
puncture the battery. Like other
batteries of this type, if burned or
punctured, they could release caustic
material which could cause injury.
Table of contents
What’s in the box.........................1
Overview ......................................2
Handset overview ...............................2
Telephone base overview ...................3
Charger overview ...............................5
Display icons overview .......................5
Handset and Telephone base lights
overview ..........................................6
Connect ........................................7
Connect the telephone base ...............7
Connect the charger ...........................7
Mount the telephone base ..................7
Install the battery ................................8
Check the battery level .......................8
Charge the battery ..............................8
Before use ....................................9
Set date and time ...............................9
Set answering system through
voice guide ......................................9
Check for dial tone ............................10
Operating range ................................10
Configure your telephone ........10
Using the phone menu .....................10
Set language ....................................10
Set date and time .............................11
Home area code ...............................11
Dial mode .........................................12
Temporary tone dialing .....................12
Telephone Operations ..............12
Make a call .......................................13
Predial a call .....................................13
Answer a call ....................................13
End a call ..........................................13
Speakerphone ..................................13
Volume .............................................14
Mute ..................................................14
Join a call in progress .......................14
Call waiting .......................................14
Chain dialing .....................................15
Find handset .....................................15
Redial list ..................................16
Review a redial list entry ...................16
Dial a redial list entry ........................16
Delete a redial list entry ....................16
Multiple handset use .................17
Intercom ...........................................17
Answer an incoming call during an
intercom call ..................................18
Call transfer using intercom ..............18
Phonebook .................................20
Add a phonebook entry ....................20
Review the phonebook entries .........20
Alphabetical search ..........................21
Edit a phonebook entry .....................21
Delete a phonebook entry ................21
Dial a phonebook entry .....................21
Caller ID ......................................22
Review the caller ID log ....................22
Memory match ..................................22
Missed call indicator .........................23
View dialing options ..........................23
Dial a caller ID log entry ...................24
Save a caller ID log entry to the
phonebook ....................................24
Delete the caller ID log entries .........24
Call block ...................................25
Block unknown calls .........................25
Add a call block entry .......................25
Review call block list .........................26
Edit a call block list entry ..................26
Save a caller ID log entry to call
block list ........................................26
Delete a call block list entry ..............26
Sound settings .........................27
Key tone ...........................................27
Ringer tone .......................................27
Handset ringer volume .....................27
Telephone base ringer volume .........27
Temporary ringer silencing ...............28
Quiet mode .......................................28
About the built-in answering
system and voicemail service ...
29
Set your built-in answering
system .....................................29
Turn the answering system on
or off ..............................................29
Default announcement .....................30
Record your own announcement ......30
Play your announcement ..................30
Options during playback: ..................30
Delete your announcement ..............30
Set number of rings .........................31
Turn the call screening on or off .......31
Turn the message alert tone on
or off ..............................................31
Voice guide .......................................32
Using your built-in answering
system .....................................32
New message indication ...................32
Message playback ............................33
Delete all messages .........................33
Remote access .................................34
Set remote access code ...................34
Call screening ...................................35
Call intercept .....................................35
Record, play, and delete memos ......35
Using your built-in answering
system and voicemail service ...
36
Retrieve voicemail from
telephone service ...................36
Retrieve voicemail ............................36
Set your voicemail number ...............36
Turn off the new voicemail
indicators .......................................37
Expand your telephone system ...
37
Screen messages ......................38
Frequently asked questions .....40
ECO mode ..................................43
General product care ................43
The RBRC
®
seal .........................44
FCC, ACTA and IC regulations ....
44
California Energy Commission
battery charging testing
instructions .............................46
For C-UL compliance only ........47
Limited Warranty .......................50
Technical Specifications ........... 52
1
What’s in the box
Your telephone package contains the
following items. Save your sales receipt
and original packaging in case it is
necessary to ship your telephone for
warranty service.
NOTE
To purchase replacement batteries or power
adapters, visit our website at
www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial
1 (800) 267-7377.
Abridged user’s
manual
Important Safety
Instructions
1 set for CS6949
2 sets for CS6949-2
3 sets for CS6948-3/CS6949-3
1 set for CS6949
2 sets for CS6949-2
3 sets for CS6948-3/CS6949-3
1 set for CS6949
2 sets for CS6949-2
3 sets for CS6948-3/CS6949-3
1 set for CS6949
2 sets for CS6949-2
3 sets for CS6948-3/CS6949-3
2
Overview
Handset overview
1 Handset earpiece
2 LCD display
3
Show the menu.
While in a menu, press to select
an item, or save an entry or
setting.
4
Hang up a call.
Silence the ringer temporarily
while the handset is ringing.
Press and hold to erase the
missed call indicator while the
phone is not in use.
Press to return to the previous
menu; or press and hold to return
to idle mode, without making
changes.
5
Press and hold to set and turn on
the quiet mode, or turn it off.
Press repeatedly to show other
dialing options when reviewing a
caller ID log entry.
6
Press to start an intercom
conversation or transfer a call (for
multi-handset models only).
7 Microphone
8
Mute the microphone during a
call.
Delete digits or characters while
using the dialing keys.
Silence the ringer temporarily
while the handset is ringing.
9
Make or answer a call using the
handset speakerphone.
During a call, press
to switch
between the speakerphone and
the handset earpiece.
10
While you have set the dial mode
to pulse and on a call, press to
switch to tone dialing temporarily.
11
Press to add a space when
entering names.
12
Press repeatedly to add or
remove 1 in front of the caller ID
log entry before dialing or saving
it to the phonebook.
Press and hold to set or dial your
voicemail number.
h
i
j
n
p
o
k
l
m
a
b
c
d
e
f
g
3
13
Make or answer a call.
Answer
an incoming call when
you hear a call waiting alert.
14
Press repeatedly to review the
redial list.
Press and hold to insert a dialing
pause while entering a number.
15
Review the phonebook when the
phone is not in use.
Increase the listening volume
during a call.
S
croll up while in a menu,
phonebook, caller ID log, or
redial list.
M
ove the cursor to the right when
entering numbers or names.
Review the caller ID log when the
phone is not in use.
Decrease the listening volume
during a call.
Scroll down while in a menu,
phonebook, caller ID log, or
redial list.
Move the cursor to the left when
entering numbers or names.
16 light
On when the handset is
charging.
Telephone base overview
1 LCD display
2
Answer an incoming call when
you receive a call waiting alert.
Review the phonebook when the
phone is not in use.
Scroll up while in a menu, or in
the phonebook, caller ID log or
redial list.
Move the cursor to the right when
entering numbers or names.
Show a menu.
While in a menu, press to select
an item, or save an entry or
setting.
Review the caller ID log when the
telephone is not in use.
Scroll down while in a menu, or
in the phonebook, caller ID log or
redial list.
Move the cursor to the left when
entering numbers or names.
k
l
m
j
b
c
d
e
f
a
ghi
4
Press to return to the previous
menu or idle mode without
making changes.
Press and hold to erase the
missed call indicator when the
phone is not in use.
While the phone is ringing,
press to silence the base ringer
temporarily.
3 light
On when the phone is in use, or
when the answering system is
answering a call.
On when a handset is being
registered.
Flashes when there is an
incoming call.
Flashes when handsets are being
deregistered.
Flashes when another telephone
on the same line is in use.
4
Press to start or stop message
playback.
Flashes when there are new
messages or memos in the
answering system.
X/
Press to delete the playing
message or playing
announcement.
While reviewing the redial list,
phonebook or caller ID log, press
to delete an individual entry.
While entering names or
numbers, press to delete a
character or digit.
Press once to repeat the playing
message.
Press twice to play the previous
message.
Press to skip to the next
message.
5
Mute the microphone during a
call.
Silence the base ringer
temporarily while the phone is
ringing.
Press to page all handsets when
the phone is not in use.
Press to turn the built-in
answering system on or off.
/
Press to make, answer or end a
call.
During a call, press to switch
between the corded handset and
the base speakerphone.
6
Press and hold to set and turn on
the quiet mode, or turn it off.
Press repeatedly to display other
dialing options when reviewing a
caller ID log entry.
7
Press to enter space during text
editing.
8
Switch to tone dialing temporarily
during a call.
9
While reviewing a caller ID log
entry, press repeatedly to add or
remove 1 in front of the telephone
number before dialing or saving it
in the phonebook.
Press and hold to set or dial your
voicemail number.
5
10 Microphone
11
Press to initiate or answer an
intercom call, or to transfer a
call.
VOL
Adjust the listening volume.
Adjust the telephone base ringer
volume.
Review the redial list.
Press repeatedly to view the
last 10 numbers dialed.
Press and hold to insert a
dialing pause while dialing or
entering numbers.
12 Speakerphone
13 Corded handset
Charger overview
1 Charging pole
Display icons overview
Handset display icons
The battery icon flashes
when the battery is low
and needs charging.
The battery icon animates
when the battery is
charging.
The battery icon becomes
solid when the battery is
fully charged.
The handset ringer is off.
There are new voicemail
received from your
telephone service
provider.
1/13
The message number
currently playing and total
number of new/old
messages recorded.
ANS ON
The answering system is
turned on.
ECO
The ECO mode activates
automatically to reduce
power consumption when
the handset is within range
from the telephone base.
NEW
There are new caller ID
log entries.
a
6
Telephone base display icons
The telephone base
ringer is off.
There are new
voicemail received
from your telephone
service provider.
NEW
The entry you are
reviewing is new in
the caller ID log.
13
MSG#
The total number
of messages
recorded when the
telephone base is
not in use.
The number of the
playing message.
Handset and Telephone base
lights overview
Handset lights
On when the handset
speakerphone is in
use.
On when the handset
is charging in the
telephone base or
handset charger.
Telephone base lights
On when the
telephone line is
in use.
On when you
are registering a
handset.
Flashes quickly
when there is an
incoming call.
Flashes when
another telephone
sharing the same
line is in use.
Flashes when you
are deregistering
all handsets.
On when the
answering system is
turned on.
On when the base
speakerphone is on.
Flashes when there
are new memos or
messages in the
answering system.
On when mute
function is on.
7
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
NOTES
Use only the adapters provided.
Make sure the electrical outlets are not
controlled by wall switches.
The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
TIP
If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.
Connect the telephone base
Connect the charger
Mount the telephone base
4
5
2
4
5
2
4
5
2
8
Install the battery
Install the battery as shown below.
NOTES
Use only the battery provided.
Charge the battery provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
Check the battery level
After you have installed the battery,
check the battery level on the handset
screen.
If the battery icon is
, or
, then go
to Before use section to set the date
and time, and set the answering
system through voice guide.
If the screen is blank, or
flashes,
then the battery needs to be
charged. Go to Charge the battery
section before you do any setting or
operation.
Charge the battery
Place the handset in the handset
charger to charge.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
Battery
indicators
Battery
status
Action
The screen
is blank, or
shows Put
in charger
and
flashes.
The battery
has no
charge or
very little
charge. The
handset
cannot be
used.
Charge
without
interruption
(at least 30
minutes).
The screen
shows Low
battery and
flashes.
The battery
has enough
charge to be
used for a
short time.
Charge
without
interruption
(at least 30
minutes).
THIS SIDE UP
9
The screen
shows
HANDSET X.
The battery is
charged.
To keep
the battery
charged,
place it in
the handset
charger when
not in use.
When it is fully charged, you can expect
the following performance:
Operation Operating time
While in handset
use (talking*)
Seven hours
While in
speakerphone mode
(talking*)
Three and a half
hours
While not in use
(standby**)
Five days
* Operating times vary depending on your actual
use and the age of the battery.
** Handset is not charging or in use.
NOTES
Place the handset in the charger will
bypass the set date and time, and voice
guide.
For best performance, keep the handset in
the charger when not in use.
The battery is fully charged after 11 hours
of continuous charging.
If you place the handset in the charger
without plugging in the battery, the screen
displays NO BATTERY.
To manually set the date and time
and the answering system, refer to
Congure your telephone and Set
your built-in answering system
sections.
To manually initiate the voice guide,
refer to Voice guide under Set your
built-in answering system section.
Before use
After you install your telephone or
power returns following a power outage
and battery depletion, the handset will
prompt you to set the date and time,
and the answering system through
voice guide.
Set date and time
NOTE
Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
Use the dialing keys (0-9) to enter
the month (MM), date (DD) and year
(YY). Then press SELECT.
2. Use the dialing keys (
0-9) to enter the
hour (HH) and minute (MM). Then
press or to choose AM or PM.
3. Press
SELECT to save.
After the setting for the date and time, the
screen will display Voice guide to... and
set up Ans sys? alternatively.
Set answering system through
voice guide
This feature assists you to do the basic
setup of the answering system. You can
follow the voice guide to record your own
announcement, set the number of rings
and the message alert tone.
Press SELECT to start the voice
guide for the answering system
setup. You hear the voice prompt
Hello! This voice guide will assist
you with the basic setup of your
answering system.
Setup your answering system by
inputting the designated numbers as
instructed in the voice guide.
1.
1.
2.
10
Check for dial tone
Press . If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures
described above are properly done.
It may be a wiring problem. If you
have changed your telephone
service to digital service from a
cable company or a VoIP service
provider, the telephone line may need
to be rewired to allow all existing
telephone jacks to work. Contact your
cable/VoIP service provider for more
information.
Operating range
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and
telephone base can communicate over
only a certain distance - which can
vary with the locations of the telephone
base and handset, the weather, and the
layout of your home or office.
When the handset is out of range, the
handset displays Out of range or no pwr
at base.
If there is a call while the handset is
out of range, it may not ring, or if it
does ring, the call may not connect well
when you press . Move closer to the
telephone base, and then press
to answer the call. If the handset
moves out of range during a telephone
conversation, there may be interference.
To improve reception, move closer to the
telephone base.
Configure your telephone
Using the phone menu
Press MENU when the phone is not
in use.
Press or until the screen displays
the desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press
CANCEL on the phone.
To return to idle mode, press and hold
CANCEL on the phone.
Set language
The LCD language is preset to English.
You can select English, French or
Spanish to be used in all screen displays.
Press MENU when the phone is not
in use.
Press or to choose Settings,
and then press SELECT.
Press SELECT to choose LCD
language.
Press or to choose English,
Français or Español, and then press
SELECT. Then the screen returns
to the previous menu. You hear a
confirmation tone.
NOTE
If you accidentally change the LCD language
to French or Spanish, you can reset it to
English easily by pressing MENU then
entering 364
#
.
1.
2.
3.
1.
2.
3.
4.
11
Set date and time
NOTE
Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
Press MENU when the phone is not
in use.
Press or to choose Set date/time,
and then press SELECT.
Use the dialing keys (0-9) to enter
the month (MM), date (DD) and year
(YY). Then press SELECT.
4. Use the dialing keys (
0-9) to enter the
hour (HH) and minute (MM). Then
press or to choose AM or PM.
5. Press
SELECT to save. Then the
screen returns to the previous menu.
You hear a confirmation tone.
1.
2.
3.
Home area code
If you dial your local calls using only
seven digits (area code not required),
you can program your home area code
so that when you receive a call within
your local area, the telephone number
is automatically stored without the area
code in the caller ID log.
Press MENU when the phone is not
in use.
Press or to choose Settings, and
then press SELECT.
Press or to choose Home area
code, and then press SELECT.
Use the dialing keys to enter a
three-digit home area code.
Press DELETE on the handset or
X/DELETE on the telephone to
delete a digit.
Press and hold DELETE on the
handset to delete all digits.
Press SELECT to save your
selection. Then the screen returns
to the previous menu. You hear a
confirmation tone.
NOTE
If, in the future, your telephone service
provider requires you to dial the area
code when making a local call, or, if you
move to a location that requires it, delete
the home area code you have already
programmed, following the steps above.
After you have deleted the home area
code, _ _ _ will appear on the display.
1.
2.
3.
4.
5.
12
Dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary)
service, you need to change the dial
mode to pulse dialing before using the
telephone to make a call.
Press MENU when the phone is not
in use.
Press or to choose Settings,
and then press SELECT.
Press or to choose Dial mode,
and then press SELECT.
Press or to choose Touch-tone
or Pulse.
Press SELECT to save your
selection. Then the screen returns
to the previous menu. You hear a
confirmation tone.
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-tone
dialing temporarily during a call. This
is useful if you need to send touch-
tone signals to access your telephone
banking or long distance services.
During a call, press .
Use the dialing keys to enter the
number. The telephone sends
touch-tone signals. The telephone
automatically returns to pulse dialing
mode after you end the call.
1.
2.
3.
4.
5.
1.
2.
Telephone Operations
Telephone base control key panel:
Handset control key panel:
13
Make a call
Using a cordless handset:
Press or on the handset.
When you hear a dial tone, dial the
number.
Using the telephone base:
Lift the corded handset, or press
/SPEAKER.
When you hear a dial tone, dial the
number.
NOTES
The screen shows the elapsed time as
you talk (in hours, minutes and seconds).
While entering numbers, press and hold
PAUSE to insert a dialing pause
(a p appears).
Predial a call
Using a cordless handset:
Enter the telephone number.
Press DELETE or CANCEL to
make corrections.
Press or to dial.
NOTES
The handset displays Unable to call if
the telephone line is in use.
The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
Press and hold PAUSE to insert a dialing
pause (a p appears).
Using the telephone base:
Enter the telephone number using the
dialing keys (0-9).
Press X/DELETE to make
corrections.
1.
2.
1.
2.
1.
2.
1.
Lift the corded handset, or press
/SPEAKER to dial.
NOTES
If you make a predial call while the
telephone line is in use, the screen
displays Unable to call.
Press and hold PAUSE to insert a dialing
pause (a p appears).
Answer a call
Using a cordless handset:
Press , , or any dialing key (0-9,
,
or ) to answer.
Using the telephone base:
Lift the corded handset, or press
/SPEAKER or any of the dialing
keys.
End a call
Using a cordless handset:
Press OFF or place the handset in
the handset charger.
Using the telephone base:
When you are using the corded
handset, place it on the telephone
base.
When you are using the base
speakerphone, press /SPEAKER.
Speakerphone
Handset speakerphone:
When the cordless handset is on a
call, press
to switch between the
handset speakerphone and the handset
earpiece.
When the speakerphone is active, the
handset displays Speaker and the
light turns on.
2.
1.
2.
14
Telephone base speakerphone:
When the corded handset is on a call,
press
/SPEAKER to switch between
the telephone base speakerphone and
the corded handset.
When the speakerphone is active, the
telephone base displays Speaker and
the /SPEAKER light turns on.
Volume
To adjust the listening volume on
a cordless handset:
During a call, press /VOLUME or
/VOLUME.
To adjust the listening volume at
the telephone base:
During a call, press VOL or VOL .
NOTES
The handset and speakerphone volume
settings are independent.
When the volume reaches the minimum
or maximum setting, you hear two beeps.
Mute
The mute function allows you to hear
the other party but the other party
cannot hear you.
During a call, press MUTE. The
screen displays Muted until the mute
function is turned off.
Press MUTE again to resume the
conversation. The screen displays
Microphone on briefly.
Join a call in progress
You can use the telephone base and
a cordless handset, or two cordless
handsets at a time on an outside call.
To join a call with a cordless
handset:
When a handset or the telephone
base is already on a call, press or
on another handset to join the call.
Press OFF or place the handset in
the handset charger to exit the call.
The call continues until both devices
hang up.
To join a call with the telephone
base:
Lift the corded handset or press
/SPEAKER.
Place the corded handset back to the
telephone base or press
/SPEAKER to exit the call. The call
continues until both devices hang up.
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there
is an incoming call while you are on
another call.
Press FLASH to put the current call
on hold and take the new call.
Press FLASH at any time to switch
back and forth between calls.
If you also subscribe to caller ID
service, it will let you see the name and
telephone number of the caller during
call waiting.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59

VTech CS6948-3 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues