VTech DS6251-4 Manuel utilisateur

DS6251

DS6251-2

DS6251-3

DS6251-4

2-Line Cordless Answering System

with Smart Call Blocker

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

the latest VTech product news.

User’s manual

BC

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identiﬁed with

this logo have reduced noise

and interference when used

with most T-coil equipped

hearing aids and cochlear

implants. The TIA-1083

Compliant Logo is a trademark

of the Telecommunications

Industry Association. Used

under license.

Important safety instructions

When using your telephone equipment,

basic safety precautions should always be

followed to reduce the risk of ﬁre, electric

shock and injury, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a damp

cloth for cleaning.

4. Do not use this product near water

such as near a bath tub, wash

bowl, kitchen sink, laundry tub or a

swimming pool, or in a wet basement

or shower.

5. Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

6. Avoid placing the telephone system

in places with extreme temperature,

direct sunlight, or other electrical

devices. Protect your phone from

moisture, dust, corrosive liquids and

fumes.

7. Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or rug. This

product should never be placed near

or over a radiator or heat register. This

product should not be placed in any

area where proper ventilation is not

provided.

8. This product should be operated

only from the type of power source

indicated on the marking label. If you

are not sure of the type of power

supply in your home or ofﬁce, consult

your dealer or local power company.

The ENERGY STAR

®

program

(www.energystar.gov)

recognizes and encourages

the use of products that save

energy and help protect our

environment. We are proud

to mark this product with the

ENERGY STAR

®

label indicating

it meets the latest energy

efﬁciency guidelines.

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature operations

and troubleshooting necessary to install

and operate your new VTech telephone.

Please review this manual thoroughly to

ensure proper installation and operation

of this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com. In Canada, please

visit www.vtechcanada.com.

9. Do not allow anything to rest on the

power cord. Do not install this product

where the cord may be walked on.

10. Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

11. To reduce the risk of electric shock,

do not disassemble this product, but

take it to an authorized service facility.

Opening or removing parts of the

telephone base or handset other than

speciﬁed access doors may expose

you to dangerous voltages or other

risks. Incorrect reassembling can cause

electric shock when the product is

subsequently used.

12. Do not overload wall outlets and

extension cords.

13. Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

• When the power supply cord or

plug is damaged or frayed.

• If liquid has been spilled onto the

product.

• If the product has been exposed to

rain or water.

• If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operation instructions. Improper

adjustment of other controls may

result in damage and often requires

extensive work by an authorized

technician to restore the product to

normal operation.

• If the product has been dropped

and the telephone base and/or

handset has been damaged.

• If the product exhibits a distinct

change in performance.

14. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric shock

from lightning.

15. Do not use the telephone to report

a gas leak in the vicinity of the leak.

Under certain circumstances, a spark

may be created when the adapter

is plugged into the power outlet,

or when the handset is replaced in

its cradle. This is a common event

associated with the closing of any

electrical circuit. The user should

not plug the phone into a power

outlet, and should not put a charged

handset into the cradle, if the phone is

located in an environment containing

concentrations of ﬂammable or

ﬂame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

ﬁre or explosion. Such environments

might include: medical use of oxygen

without adequate ventilation; industrial

gases (cleaning solvents; gasoline

vapors; etc.); a leak of natural gas; etc.

16. Only put the handset of your

telephone next to your ear when it is in

normal talk mode.

17. The power adapter is intended to be

correctly oriented in a vertical or ﬂoor

mount position. The prongs are not

designed to hold the plug in place if

it is plugged into a ceiling, under-the-

table or cabinet outlet.

18. For pluggable equipment, the

socket-outlet shall be installed near

the equipment and shall be easily

accessible.

19. CAUTION: Use only the batteries

indicated in this manual. There may

be a risk of explosion if a wrong type

of battery is used for the handset.

Use only the supplied rechargeable

batteries or replacement batteries

(BT183342/BT283342) for the handset.

Do not dispose of batteries in a ﬁre.

They may explode.

20. Use only the adapter included with

this product. Incorrect adapter polarity

or voltage can seriously damage the

product.

Base unit power adapter:

Output: 6V DC @ 600mA.

Charger unit power adapter:

Output: 6V DC @ 400mA.

SAVE THESE INSTRUCTIONS

Battery

• Use only the battery provided or

equivalent. To order a replacement, visit

our website at www.vtechphones.com

or call 1 (800) 595-9511. In Canada,

go to www.vtechcanada.com or

call 1 (800) 267-7377.

• Do not dispose of the battery in a ﬁre.

Check with local waste management

codes for special disposal instructions.

• Do not open or mutilate the battery.

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

• Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations speciﬁed in

this manual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to digital

cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at least

six inches from the pacemaker.

• Should NOT place wireless telephones

directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

• Should use the wireless telephone at the

ear opposite the pacemaker.

WTR’s evaluation did not identify any risk

to bystanders with pacemakers from other

persons using wireless telephones.

About cordless telephones

• Privacy: The same features that make a

cordless telephone convenient create

some limitations. Telephone calls are

transmitted between the telephone

base and the cordless handset by radio

waves, so there is a possibility that

the cordless telephone conversations

could be intercepted by radio receiving

equipment within range of the

cordless handset. For this reason, you

should not think of cordless telephone

conversations as being as private as

those on corded telephones.

• Electrical power: The telephone base

of this cordless telephone must be

connected to a working electrical outlet.

The electrical outlet should not be

controlled by a wall switch. Calls cannot

be made from the cordless handset

if the telephone base is unplugged,

switched off or if the electrical power is

interrupted.

• Potential TV interference: Some cordless

telephones operate at frequencies that

may cause interference to televisions

and VCRs. To minimize or prevent such

interference, do not place the telephone

base of the cordless telephone near or

on top of a TV or VCR. If interference

is experienced, moving the cordless

telephone farther away from the TV or

VCR often reduces or eliminates the

interference.

• Rechargeable batteries: Exercise care in

handling batteries in order not to create

a short circuit with conducting material

such as rings, bracelets and keys. The

battery or conductor may overheat and

cause harm. Observe proper polarity

between the battery and the battery

charger.

• Nickel-metal hydride rechargeable

batteries: Dispose of these batteries in

a safe manner. Do not burn or puncture

the battery. Like other batteries of this

type, if burned or punctured, they could

release caustic material which could

cause injury.

i

Table of contents

What’s in the box ............................................ 1

Overview ........................................................ 2

Handset overview ................................................. 2

Telephone base overview .................................. 4

Charger overview .................................................5

Display icons overview........................................ 6

Handset lights overview ......................................7

Telephone base lights overview ........................7

Connect ........................................................... 8

Connect the telephone base ............................. 8

Connect the charger ............................................ 8

Mount the telephone base ................................ 8

Install the battery .................................................. 9

Charge the battery ............................................... 9

Before use .....................................................10

Set date and time ............................................... 10

Set Smart call blocker through

voice guide .................................................... 10

Set answering system through

voice guide .................................................... 10

Operating range .................................................11

Conﬁgure your telephone ............................ 11

Set language ........................................................11

Set date and time ................................................11

Use caller ID to automatically set

date and time .................................................12

Home area code .................................................12

Dial mode ............................................................. 12

Temporary tone dialing .....................................12

Headset usage .............................................. 12

Telephone operations ................................... 13

Make a call ............................................................ 13

Predial a call .........................................................13

Answer a call ........................................................13

End a call ............................................................... 13

Speakerphone .....................................................13

Volume control ....................................................13

Mute ..................................................................... 14

Equalizer .............................................................. 14

Hold ..................................................................... 14

Call waiting .......................................................... 14

Conference call ................................................... 14

Answer an incoming call during

a conference call ............................................15

Chain dialing ........................................................15

Find handset ....................................................... 16

Redial list ....................................................... 16

Review the redial list .......................................... 16

Dial a redial list entry.......................................... 16

Save a redial list entry ........................................ 16

Delete a redial list entry .....................................17

Multiple handset use .....................................17

Join a call in progress .........................................17

Intercom ...............................................................17

Answer an incoming call during

an intercom call ............................................. 18

Call transfer using intercom .............................. 18

Push-to-talk (PTT) ............................................... 19

Turn PTT on or off ............................................... 19

PTT call to a single device ................................. 20

PTT call to multiple devices .............................. 20

Answer a PTT call .................................................21

Phonebook ................................................... 21

Add a phonebook entry ....................................21

Review a phonebook entry ...............................21

Alphabetical search ............................................22

Edit a phonebook entry ..................................... 22

Dial a phonebook entry .....................................22

Delete the phonebook entries .........................22

Speed dial ............................................................22

Assign a speed dial entry ...................................23

Review the speed dial list ..................................23

Reassign a speed dial entry...............................23

Dial a speed dial number ..................................23

Delete a speed dial entry ..................................23

Caller ID .........................................................24

Review a caller ID log entry.............................. 24

Memory match ................................................... 24

Missed call indicator .......................................... 24

View dialing options...........................................25

Dial a caller ID log entry .....................................25

Save a caller ID log entry to

the phonebook ..............................................25

Delete a caller ID log entry ................................25

Smart call blocker .......................................... 26

Call categories .....................................................27

ii

Call controls ..........................................................27

Set Smart call blocker on/off ............................ 28

Control calls without numbers ......................... 28

Control uncategorized calls .............................. 29

Block list ............................................................... 30

Add a block entry .............................................. 30

Review block list ................................................. 30

Edit a block entry ............................................... 30

Save a caller ID log entry to the block list .......31

Delete a block entry ...........................................31

Delete all block entries ......................................31

Allow list ................................................................ 31

Add an allow entry ..............................................31

Review allow list ..................................................32

Edit an allow entry...............................................32

Save a caller ID log entry to the allow list ........32

Delete an allow entry .........................................32

Delete all allow entries .......................................32

Star name list ........................................................33

Add a star name entry ........................................33

Review star name list ..........................................33

Edit a star name entry .........................................33

Save a caller ID log entry to

the star name list ............................................33

Delete a star name entry ................................... 34

Delete all star name entries .............................. 34

Screening announcement ................................ 34

Play your current announcement of

screening with caller name ......................... 34

Play your current announcement of

screening without caller name ....................35

Record your name for all screening

announcements .............................................35

Reset all your screening announcements .......35

Voice guide to set Smart call blocker ............. 36

Allowed calls ....................................................... 36

Allow calls without numbers ............................ 36

Allow uncategorized calls ................................. 36

Blocked calls.........................................................37

Block calls without numbers ..............................37

Block uncategorized calls ..................................37

Screen calls without numbers ...........................37

Screen uncategorized calls ............................... 39

Option while on a call ....................................... 42

Sound settings ..............................................42

Key tone ............................................................... 42

Ringer tone ......................................................... 42

Ringer volume .................................................... 43

Temporary ringer silencing .............................. 43

Quiet mode......................................................... 43

About the built-in answering system and

voicemail service ...................................... 44

Set your built-in answering system ..............44

Turn the answering system on or off ..............44

Default announcement ..................................... 45

Record your own announcement ................... 45

Play the announcement ................................... 45

Delete or reset the announcement ................. 45

Set number of rings ...........................................46

Turn the call screening on or off ......................46

Turn the message alert tone on or off ............ 46

Set message recording time .............................47

Voice guide ..........................................................47

Use your built-in answering system ............. 47

New message indication ...................................47

Message playback ..............................................47

Delete all messages ........................................... 49

Remote access .................................................... 50

Set your remote access code ........................... 50

Record, play, and delete memos ....................50

Call screening ......................................................51

Call intercept ........................................................51

Use the built-in answering system and

voicemail service ...................................... 51

Retrieve voicemail from

telephone service .................................... 52

Retrieve voicemail ...............................................52

Set your voicemail number ................................ 52

Turn off the new voicemail indicators ..............52

Expand your telephone system .................... 52

Screen messages ........................................... 53

Frequently asked questions .......................... 55

ECO mode ..................................................... 59

General product care ....................................59

The RBRC

®

seal ..............................................59

iii

FCC, ACTA and IC regulations .......................60

California Energy Commission battery

charging testing instructions ...................62

For C-UL compliance only ............................. 62

Mesures de sécurité importantes .................... 62

Limited warranty ........................................... 66

Technical speciﬁcations ................................68

1

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in the event

warranty service is necessary.

• To purchase a replacement battery or power

adapter, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call

1 (800) 267-7377.

1 set for DS6251

2 sets for DS6251-2

3 sets for DS6251-3

4 sets for DS6251-4

1 set for DS6251

DS6251-2

DS6251-3

DS6251-4

1 set for DS6251

DS6251-2

DS6251-3

DS6251-4

1 set for DS6251-2

2 sets for DS6251-3

3 sets for DS6251-4

Quick

start

guide

Introducing

Smart call

blocker

Important

safety

instructions

2

Overview

Handset overview

1 – Handset earpiece

2 – LCD display

3 – Softkeys (2)

• Press to select the menu item

displayed above the key.

• While in a menu, press to select an

item, save an entry or setting, cancel

an operation, or back up to the

previous menu.

4 – OFF

• During a call, press to hang up a call.

• While in a menu, press to cancel an

operation, back up to the previous

menu, or exit the menu display.

• When the handset is ringing, press

to mute the ringer temporarily.

• Press and hold to erase the missed

call indicator while the phone is not

in use.

5 – /

• Press to show phonebook entries

when the telephone is not in use.

• Press to increase the listening

volume when on a call, or increase

the message playback volume.

• Press to scroll up while in a menu.

• While entering names or numbers,

press to move the cursor to the right.

/

• Press to show the caller ID log when

the telephone is not in use.

• Press to decrease the listening

volume when on a call, or decrease

the message playback volume.

• Press to scroll down while in a

menu.

• While entering names or numbers,

press to move the cursor to the left.

6 – LINE 1 / LINE 2 / FLASH

• Press to make or answer a call on the

corresponding line.

• During a call, press to answer an

incoming call on the corresponding

line when you receive a call waiting

alert.

• During message playback, press

to call back the caller if the caller’s

number is available.

7 –

• Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

• While editing the name of a caller

ID log entry, press repeatedly to

re-arrange the order of the name.

• Press and hold to enter the

quiet mode setting screen, or to

deactivate quiet mode.

8 – OPER

• Press and hold to add a space when

entering names.

1

2

3

4

5

7

8

6

15

10

18

16

17

13

12

11

14

19

20

21

9

3

9 – CALL BLOCK

• Press to block the incoming call

when the telephone is ringing or

during the call.

• When the handset is not in use,

press to show the Smart call blocker

menu.

10 –

• During a call, press to mute the

microphone.

• When the headset is ringing, press

to mute the ringer temporarily.

• While reviewing the redial list,

phonebook, caller ID log, allow list,

block list, or the star name list, press

to delete an individual entry.

• During message or announce

playback, press to delete the

playing message or the recorded

announcement.

• While entering names or numbers,

press to delete a digit or character.

• While entering names or numbers,

press and hold to delete all digits or

characters.

11 – Microphone

12 –

• Review the redial list.

• Press and hold to insert a dialing

pause while dialing or entering

numbers into the phonebook.

13 – PTT / HOLD

• Press to display the PTT menu to

begin a PTT call.

• Press and hold to begin a one-to-

group broadcast when the handset

is not in use.

• Press to put a call on hold.

14 – TONE

• Press to switch to tone dialing

temporarily during a call if you have

pulse service.

• While entering names, press to

change the next letter to upper or

lower case.

15 –

• Press and hold to set or dial your

voicemail number.

• Press repeatedly to add or remove

1 in front of the caller ID log entry

before dialing or saving it to the

phonebook.

16 – Headset jack

• Plug in a wired headset for

handsfree telephone conversation.

17 –

• Make or answer a call using the

handset speakerphone via the ﬁrst

available line.

• Switch between the handset

speakerphone and the handset

earpiece during a call.

18 – CHARGE light

• On when the handset is charging in

the telephone base or charger.

4

Telephone base overview

1 – LCD display

2 – Softkeys (2)

• Press to select the menu item

displayed above the key.

• While in a menu, press to select an

item, save an entry or setting, cancel

an operation, or back up to the

previous menu.

/

• Press to scroll down while in a

menu.

• Press to review the caller ID log

when the telephone is not in use.

• While entering names or numbers,

press to move the cursor to the left.

• During a call, press to access the

caller ID log.

• While in a menu, press to cancel an

operation, back up to the previous

menu, or exit the menu display.

• When the telephone base is

ringing, press to mute the ringer

temporarily.

• Press and hold to erase the missed

call indicator while the phone is not

in use.

/

• Press to scroll up while in a menu.

• Press to review the phonebook

when the telephone is not in use.

• During a call, press to access the

phonebook.

3 – CALL BLOCK

• Press to block the incoming call

when the telephone is ringing or

during the call.

• When the phone is not in use,

press to show the Smart call blocker

menu.

4 – / DELETE

• Press to delete the message

currently playing.

• When the phone is not in use,

press twice to delete all previously

reviewed messages.

• While reviewing the redial list,

phonebook, caller ID log, allow list,

block list, or star name list, press to

delete an individual entry.

• While entering names or numbers,

press to delete a digit or character.

• While entering names or numbers,

press and hold to delete all digits or

characters.

/ REPEAT

• During message playback, press to

repeat a message or press twice to

play the previous message.

/ SKIP

• During message playback, press to

skip to the next message.

/ REC

• Press to record a memo or an

outgoing announcement.

5 – Speed dial keys

• Press a dialing key to dial the

phonebook entry stored in the

corresponding speed dial location.

1

2

3

4

5

6

7

8

9

12

13

10

14

11

5

• Press an unassigned speed dial key

to assign a speed dial entry.

6 – LINE 1, LINE 2

• Press to make, answer or end a call

on the corresponding line.

• During message playback, press

to call back the caller if the caller’s

number is available.

/ ON/OFF LINE 1,

/ ON/OFF LINE 2

• Press to turn the answering machine

of the corresponding line on or off.

/ MAILBOX LINE 1,

/ MAILBOX LINE 2

• Start or stop message playback of

the mailbox of line 1 or line 2.

7 –

• Press and hold to set or dial your

voicemail number.

• While saving a caller ID log entry to

the phonebook, allow list, or block

list, press repeatedly to add 1 in

front of the number.

TONE

• Press to switch to tone dialing

temporarily during a call if you have

pulse service.

• While entering names, press to

change the next letter to upper or

lower case.

OPER

• Press and hold to add a space when

entering names.

• While editing the name of a caller

ID log entry, press repeatedly to

re-arrange the order of the name.

• Press and hold to enter the

quiet mode setting screen, or to

deactivate quiet mode.

8 – MIC

• Microphone.

9 – PAGE

• Press to page all system handset.

10 – Charging pole

11 – PTT / HOLD

• Press to display the PTT menu to

begin a PTT call.

• Press and hold to begin a one-

to-group broadcast when the

telephone base is not in use.

• Press to put a call on hold.

12 – / /

• When the telephone is not in use,

press to adjust the telephone base

ringer volume for all lines.

• Press to adjust the listening volume

during a call or message playback.

13 – FLASH

• During a call, press to answer an

incoming call when you receive a

call waiting alert.

14 – Speaker

Charger overview

1 – Charging pole

1

6

Display icons overview

Handset screen icons

The battery icon ﬂashes when

the battery is low and needs

charging.

The battery icon animates when

the battery is charging.

The battery icon becomes solid

when the battery is fully charged.

1

• On when line 1 is in use.

• On when there is an incoming

call on line 1.

• Flashes when line 1 is on hold.

• Flashes when you are

conﬁguring the Smart call

blocker setup for line 1.

• Indication of a caller ID log

entry received from line 1.

1

2

• On when line 2 is in use.

• On when there is an incoming

call on line 2.

• Flashes when line 2 is on hold.

• Flashes when you are

conﬁguring the Smart call

blocker setup for line 2.

• Indication of a caller ID log

entry received from line 2.

1

The handset ringer for line 1 is

turned off.

1

2

The handset ringer for line 2 is

turned off.

1

2

The handset ringers for line 1 and

line 2 are turned off.

1

There are new voicemail

received on line 1 from your

telephone service provider.

1

2

There are new voicemail

received on line 2 from your

telephone service provider.

1

2

There are new voicemail

received on line 1 and line 2 from

your telephone service provider.

1

• There are new answering

system message(s) on line 1.

• Flashes when you have

accessed the answering

system menu of line 1.

2

• There are new answering

system message(s) on line 2.

• Flashes when you have

accessed the answering

system menu of line 2.

1

2

There are new answering system

message(s) on line 1 and line 2.

AnS1

ON

The answering system of line 1 is

turned on.

AnS

ON

2

The answering system of line 2 is

turned on.

AnS1

ON

2

The answering system of line 1

and line 2 is turned on.

The speakerphone is in use.

A wired headset is being used.

NEW

Indication of new missed call.

MUTE

The microphone is muted.

You can perform 3-character

alphabetical search to ﬁnd

entries quickly.

Telephone base screen icons

1

• On when line 1 is in use.

• On when there is an

incoming call on line 1.

• Flashes when line 1 is on

hold.

• Flashes when you are

conﬁguring the Smart call

blocker setup for line 1.

• Indication of a caller ID log

entry received from line 1.

1

2

• On when line 2 is in use.

• On when there is an

incoming call on line 2.

• Flashes when line 2 is on

hold.

• Flashes when you are

conﬁguring the Smart call

blocker setup for line 2.

• Indication of a caller ID log

entry received from line 2.

7

1

The telephone base ringer for

line 1 is turned off.

1

2

The telephone base ringer for

line 2 is turned off.

1

2

The telephone base ringers for

line 1 and line 2 are turned off.

1

There are new voicemail

received on line 1 from your

telephone service provider.

1

2

There are new voicemail

received on line 2 from your

telephone service provider.

1

2

There are new voicemail

received on line 1 and line 2

from your telephone service

provider.

1

• There are new answering

system message(s) on line 1.

• Flashes when you have

accessed the answering

system menu of line 1.

2

• There are new answering

system message(s) on line 2.

• Flashes when you have

accessed the answering

system menu of line 2.

1

2

There are new answering

system message(s) on line 1

and line 2.

AnS1

ON

The answering system of line 1

is turned on.

AnS

ON

2

The answering system of line 2

is turned on.

AnS1

ON

2

The answering system of line 1

and line 2 is turned on.

NEW

Indication of new missed call.

MUTE

The microphone is muted.

You can perform 3-character

alphabetical search to ﬁnd

entries quickly.

Handset lights overview

On when the handset

speakerphone is in use.

• On when line 1 is in use.

• On when there is an

incoming call on line 1.

• Flashes when line 1 is on

hold.

• On when line 2 is in use.

• On when there is an

incoming call on line 2.

• Flashes when line 2 is on

hold.

On when the handset is

charging in the telephone

base or charger.

Telephone base lights overview

LINE 1 • On when line 1 is in use.

• On when there is an

incoming call on line 1.

• Flashes when line 1 is on

hold.

LINE 2 • On when line 2 is in use.

• On when there is an

incoming call on line 2.

• Flashes when line 2 is on

hold.

ON/OFF

LINE 1

On when the answering

system of line 1 is turned on.

ON/OFF

LINE 2

On when the answering

system of line 2 is turned on.

MAILBOX

LINE 1

• On during message

playback.

• Flashes when there are

new answering system

message(s) on line 1.

MAILBOX

LINE 2

• On during message

playback.

• Flashes when there are

new answering system

message(s) on line 1.

8

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

• Use only the adapters provided.

• Make sure the electrical outlets are not

controlled by wall switches.

• The adapters are intended to be correctly

oriented in a vertical or ﬂoor mount position.

The prongs are not designed to hold the

plug in place if it is plugged into a ceiling,

under-the-table or cabinet outlet.

• If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL ﬁlter (not included) between the

telephone line cord and telephone wall jack.

Contact your DSL service provider for more

information.

Connect the telephone base

Connect the charger

Mount the telephone base

2

1

4

2

9

Install the battery

Install the battery as shown below.

• Use only supplied battery.

• Charge the battery provided with this

product only in accordance with the

instructions and limitations speciﬁed in this

manual.

• If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

Charge the battery

Place the handset in the telephone base or

the charger to charge.

Once you have installed the battery, the

handset LCD display indicates the battery

status (see the table below).

• For best performance, keep the handset in

the telephone base or charger when not in

use.

• The battery is fully charged after 12 hours of

continuous charging.

• If you place the handset in the telephone

base or the charger without plugging in the

battery, the screen displays No battery.

Battery

indicators

Battery

status

Action

The screen

is blank, or

displays Place

in charger and

ﬂashes.

The battery

has no or very

little charge.

The handset

cannot be

used.

Charge without

interruption

(at least 30

minutes).

The screen

displays

Low battery

and ﬂashes.

The battery

has enough

charge to be

used for a

short time.

Charge without

interruption

(about 30

minutes).

The screen

displays

HANDSET X.

The battery is

charged.

To keep

the battery

charged,

place it in the

telephone

base or charger

when not in

use.

When the battery is fully charged, you can

expect the following performance:

Operation

Operating

time

While in use (talking*) Seven hours

While in speakerphone

mode (talking*)

Three and a

half hours

While not in use (standby**) Five days

* Operating times vary depending on your

actual use and the age of the battery.

** Handset is not charging nor in use.

THIS SIDE UP

10

Before use

After you install your telephone or power

returns following a power outage, the

handset and telephone base will prompt

you to set the date and time, and to

conﬁgure the Smart call blocker and the

answering system through voice guide.

Set date and time

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

• To skip setting the date and time, press OFF

on the handset or CANCEL on the base.

1. Use the dialing keys (0-9) to enter the

month (MM), date (DD) and year (YY).

Then press NEXT.

2. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press q or p to choose AM or PM.

3. Press SAVE to conﬁrm.

After the date and time setting is done or

skipped, the handset and telephone base

will prompt if you want to set Smart call

blocker via voice guide.

Set Smart call blocker through

voice guide

This feature is an easy and alternative way

for you to do the basic setup of Smart call

blocker. You can follow the voice guide

to set your telephone system to allow or

screen all incoming calls, or to screen calls

that do not display a phone number.

1. Press YES to start the voice guide for

the Smart call blocker.

2. Press q or p to choose All lines, Line

1 or Line 2, then press SELECT. You

hear the voice prompt “Hello! This

voice guide will assist you with the

basic setup of Smart call blocker...”

3. Set up your Smart call blocker by

inputting the designated numbers, as

instructed in the voice guide.

• Press 1 if you want to screen calls

with telephone numbers that are

not saved in your phonebook, allow

list or star name list;

• Press 2 if you only want to screen

calls that do not display a phone

number; or

• Press 3 if you do not want to screen

calls, and want to allow all incoming

calls to get through.

• You can press OFF on the handset or

CANCEL on the telephone base to quit the

voice guide at any time.

After the Smart call blocker setting is done

or skipped, the handset and telephone

base will then prompt if you want to set up

the answering system via voice guide.

Set answering system through

voice guide

This feature assists you to do the basic

setup of the answering system. You can

follow the voice guide to record your own

announcement, set the number of rings

and the message alert tone.

1. Press YES to start the voice guide for

the answering system setup.

2. Press q or p to choose Line 1 or Line

2, then press SELECT. You hear the

voice prompt “Hello! This voice guide

will assist you with the basic setup of

your answering system.”

3. Set up your answering system by

inputting the designated numbers, as

instructed in the voice guide.

• You can press OFF on the handset or

CANCEL on the telephone base to quit the

voice guide at any time.

11

Conﬁgure your telephone

1. Press MENU when the phone is not in

use.

2. Press q or p until the screen displays

the desired feature menu.

3. Press SELECT to enter that menu.

• To return to the previous menu, press

OFF on the handset or CANCEL on the

telephone base.

Set language

The LCD language is preset to English. You

can select English, French or Spanish to be

used in all screen displays.

1. Press MENU when the phone is not in

use.

2. Press q or p to choose Settings and

then press SELECT twice.

3. Press q or p to choose English,

Français or Español, then press SELECT.

4. Press YES to conﬁrm. You hear a

conﬁrmation tone.

Set date and time

• Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Press MENU when the phone is not in

use.

2. Press q or p to choose Set date/time

and then press SELECT.

3. Use the dialing keys (0-9) to enter the

month (MM), date (DD) and year (YY).

Then press NEXT.

4. Use the dialing keys (0-9) to enter the

hour (HH) and minute (MM). Then

press q or p to choose AM or PM.

5. Press SAVE to save your setting. You

hear a conﬁrmation tone.

Check for dial tone

Press LINE 1 and/or LINE 2. If you hear a

dial tone, the installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you have

changed your telephone service to

digital service from a cable company or

a VoIP service provider, the telephone

line may need to be rewired to allow

all existing telephone jacks to work.

Contact your cable/VoIP service

provider for more information.

Operating range

This cordless telephone operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance

- which can vary with the locations of the

telephone base and handset, the weather,

and the layout of your home or ofﬁce.

When the handset is out of range, the

handset displays Out of range or no pwr

at base.

If there is a call while the handset is out of

range, it may not ring, or if it does ring, the

call may not connect well when you press

LINE 1 and/or LINE 2. Move closer to the

telephone base, then press LINE 1 and/or

LINE 2 to answer the call.

If the handset moves out of range during

a telephone conversation, there may be

interference. To improve reception, move

closer to the telephone base.

12

Use caller ID to automatically set

date and time

If you subscribe to caller ID service, you can

choose to set the date and time for each

incoming call by the caller ID information

automatically. The default setting is On.

1. Press MENU when the phone is not in use.

2. Press q or p to choose Settings, and

then press SELECT.

3. Press q or p to choose CID time sync,

then press SELECT.

4. Press q or p to choose On or

Off, then press SELECT. You hear a

conﬁrmation tone.

Home area code

If you dial local calls using only seven digits

(area code not required), you can program

your home area code so that when you

receive a call within your local area, the

telephone number is automatically stored

in the caller ID log without the area code.

1. Press MENU when the handset is not

in use.

2. Press q or p to choose Phonebook

and then press SELECT.

3. Press q or p to choose Home area

code, and then press SELECT. The

screen displays Only for 7 digits

dialing from Caller ID log brieﬂy.

4. Use the dialing keys (0-9) to enter the

desired home area code.

• Press BACKSP or DELETE to delete

a digit.

• Press and hold DELETE to delete all

digits.

5. Press SAVE to conﬁrm. You hear a

conﬁrmation tone and the screen

displays Area code will not show in

Caller ID log brieﬂy.

• If, in the future, your telephone service

provider requires you to dial the area code

when making a local call, or, if you move to

a location that requires it, delete the home

area code you have already programmed

following the steps above. After you have

deleted the home area code, ___ appears.

Dial mode

The dial mode is preset to touch-tone

dialing. If you have pulse (rotary) service,

you need to change the dial mode to

pulse dialing before using the telephone.

1. Press MENU when the handset is not

in use.

2. Press q or p to choose Settings, and

then press SELECT.

3. Press q or p to choose Dial mode,

then press SELECT.

4. Press q or p to choose Touch-tone or

Pulse, then press SELECT. You hear a

conﬁrmation tone.

Temporary tone dialing

If you have pulse (rotary) service only,

you can switch from pulse to touch-tone

dialing temporarily during a call. This is

useful if you need to send touch-tone

signals to access your telephone banking

or long distance services.

1. During a call, press TONE .

2. Use the dialing keys to enter the

number you wish to dial. The

telephone sends touch-tone signals. It

automatically returns to pulse dialing

mode after you end the call.

Headset usage

For handsfree telephone conversation,

you can use any industry standard 2.5mm

headset (purchased separately). For best

results, use a VTech 2.5mm headset.

• Lift up the plastic cover on the side of

the handset and plug a 2.5mm headset

into the jack.

La page charge ...

VTech DS6251-4 Manuel utilisateur

Ce manuel convient également à

VTech DS6251-4 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents