AT&T DLP70110 Manuel utilisateur

User’s manual

DLP70110

DECT 6.0 expansion handset

for use with AT&T models

DLP73210/DLP73410/DLP73440/

DLP73540

with BLUETOOTH® wireless technology

Congratulations

on your purchase of this AT&T product. Before using this AT&T

product, please read the Important safety information section on

pages 1-3 of this manual. For complete instructions, please

refer to the manual provided with your DLP73210/DLP73410/

DLP73440/DLP73540 telephone. You can also visit our website at

https://telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

This telephone meets the California Energy Commission regulations for

energy consumption. Your telephone is set up to comply with the energy-

conserving standards right out of the box. No further action is necessary.

Model number: DLP70110

Type: DECT 6.0 expansion handset

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be

found on the bottom of the telephone base.

Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Telephones identied with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of the

Telecommunications Industry Association. Used under license.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such

marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under

license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade

names are those of their respective owners.

The ENERGY STAR® program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect

our environment. We are proud to supply this product with an

ENERGY STAR® qualied power adapter meeting the latest energy

eciency guidelines.

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in the event warranty service

is necessary.

Battery for

cordless handset

Cordless handset

Charger for cordless

handset with power

adapter installed

Battery

compartment

cover

User’s manual

DLP70110

DECT 6.0 expansion handset

for use with AT&T models

DLP73210/DLP73410/DLP73440/

DLP73540

with BLUETOOTH® wireless technology

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine GP1621

User’s manual

DLP70110

DECT 6.0 expansion handset

for use with AT&T models

DLP73210/DLP73410/DLP73440/DLP73540

with BLUETOOTH® wireless technology

Table of contents

Getting started

Important safety information ....................................................................................................1

Safety information ........................................................................................................................1

Especially about cordless telephones ............................................................................. 2

Precautions for users of implanted cardiac pacemakers .................................. 3

ECO mode ...........................................................................................................................................3

Especially about telephone answering systems ...................................................... 3

Installation ..............................................................................................................................................4

Quick reference guide .....................................................................................................................5

Charger installation ..........................................................................................................................9

Battery installation and charging .........................................................................................10

Registration and deregistration

Add and register handsets ........................................................................................................13

Register a handset to your telephone base ..............................................................13

Deregister handsets .......................................................................................................................15

Deregister all handsets from your telephone base ............................................. 15

Appendix

Troubleshooting................................................................................................................................16

Maintenance ........................................................................................................................................27

For C-UL compliance .....................................................................................................................28

Mesures de sécurité importantes ................................................................................... 28

FCC Part 68 and ACTA ...................................................................................................................32

FCC Part 15 ........................................................................................................................................... 34

California Energy Commission battery charging testing instructions ........35

Limited warranty ............................................................................................................................. 36

Technical specications .............................................................................................................. 39

DECT 6.0 digital technology ................................................................................................ 39

Telephone operating range .................................................................................................39

Redening long range coverage and clarity ............................................................ 39

Simulated full-duplex handset and base speakerphones .............................. 39

Important safety information

This symbol is to alert you to important operating or servicing instructions

that may appear in this user’s manual. Always follow basic safety precautions

when using this product to reduce the risk of injury, re, or electric shock.

Safety information

f Read and understand all instructions in the user’s manual. Observe all markings on

the product.

f Avoid using a telephone during a thunderstorm. There may be a slight chance of

electric shock from lightning.

f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or

when the handset is replaced in its cradle. This is a common event associated with

the closing of any electrical circuit. In an inadequately ventilated environment,

the user should not plug the phone into a power outlet, nor put a charged

handset into the cradle where there are concentrations of ammable or ame-

supporting gases. A spark in such an environment could create a re or explosion.

Such environments might include: medical use of oxygen without adequate

ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural

gas; etc.

f Do not use this product near water or when you are wet. For example, do not use

it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink

and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product

comes in contact with any liquid, unplug any line or power cord immediately. Do not

plug the product back in until it has dried thoroughly.

f Install this product in a protected location where no one can trip over any line or

power cords. Protect cords from damage or abrasion.

f If this product does not operate normally, see the Troubleshooting section on

pages 16-26 of this user’s manual. If you cannot solve the problem, or if the

product is damaged, refer to the Limited warranty section pages 36-38. Do

not open this product except as directed in your user’s manual. Opening the product

or reassembling it incorrectly may expose you to hazardous voltages or other risks.

f Replace batteries, only as described in your user’s manual (pages 10-12). Do

not burn or puncture batteries — they contain caustic chemicals.

f This power adapter is intended to be correctly oriented in a vertical or oor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling or an under-the-table/cabinet outlet.

f For pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

1

Getting started

Important safety information

CAUTIONS:

f Use only the power adapter provided with this product. To obtain a replacement,

visit our website at https://telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

f U

se only the supplied rechargeable battery or replacement battery (model

BT162342/

BT262342).

To order, visit our website at

https://telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

CAUTION: To prevent risk of re or battery explosion, replace with

the correct battery type. Dispose of used batteries according to the

instructions.

Especially about cordless telephones

f Privacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment within

range of the cordless handset. For this reason, you should not think of cordless

telephone conversations as being as private as those on corded telephones.

f Electrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged,

switched o or if the electrical power is interrupted.

f Potential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will oen reduce or eliminate the

interference.

f Rechargeable batteries: This product contains nickel-metal hydride rechargeable

batteries. Exercise care in handling batteries in order not to create a short

circuit with conductive material such as rings, bracelets, and keys. The battery or

conductor may overheat and cause harm. Observe proper polarity between the

battery and the battery charger.

f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture. Like other batteries of this type, if burned or

punctured, they could release caustic material which could cause injury.

2

i

Getting started

3

The RBRC® Seal means that the manufacturer is voluntarily

participating in an industry program to collect and recycle nickel-

metal hydride rechargeable batteries when taken out of service

within the United States. These batteries may be taken to a

participating local retailer of replacement batteries or recycling

center. You may call 1-800-8-BATTERY® for locations accepting

spent Ni-MH batteries.

RBRC® and 1-800-8-BATTERY® are registered trademarks of the

Rechargeable Battery Recycling Corporation.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food and

Drug Administration, WTR recommends to physicians that:

Pacemaker patients:

f Should keep wireless telephones at least six inches from the pacemaker.

f Should NOT place wireless telephones directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

f Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from

other persons using wireless telephones.

ECO mode

This power conserving technology reduces power consumption for optimal battery

performance. The ECO mode activates automatically whenever the handset is

synchronized with the telephone base.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to inform the other

party that the call is being recorded. To ensure that you are in compliance with any

federal or state regulations regarding recording a telephone call, you should start

the recording process and then inform the other party that you are recording the

conversation.

SAVE THESE INSTRUCTIONS

Important safety information

Getting started

4

See pages 10-12

for easy instructions.

You must install and

charge the battery before

using the telephone.

STOP!

Installation

Your product may be shipped with a protective sticker covering the

handset display - remove it before use.

For customer service or product information, visit our website at

https://telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Avoid placing the charger too close to:

f Communication devices such as television sets, VCRs, or other

cordless telephones.

f Excessive heat sources.

f Noise sources such as a window with trac outside, motors,

microwave ovens, refrigerators, or uorescent lighting.

f Excessive dust sources such as a workshop or garage.

f Excessive moisture.

f Extremely low temperature.

f Mechanical vibration or shock such as on top of a washing

machine or workbench.

Getting started

Quick reference guide

Getting started

5

CHARGE light

f On when the handset is charging

in the telephone base or charger.

VOL p DIR

f Press p DIR to show directory

entries when the handset is not

in use.

f Press to scroll up while in menus.

f While entering names or numbers,

press to move the cursor to the

right.

f Press to increase the listening

volume when on a call, or to

increase the message playback

volume.

VOL q CID

f Press q CID to show caller ID log

when the handset is not in use.

f Press to scroll down while in

menus.

f While entering names or numbers,

press to move the cursor to the

le.

f Press to decrease the listening

volume when on a call, or

to decrease the message

playback volume.

CELL

f Press to make or answer a

cell call.

f During a cell call, press to

answer an incoming cell call

when you hear a call waiting

alert.

f During message playback,

press to call back the caller

if the caller’s number is

available.

HOME/FLASH

f Press to make or answer a

home call.

f During a call, press to answer

an incoming home call when

you receive a call waiting alert.

f During message playback,

press to call back the caller

if the caller’s number is

available.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

4

3

2

1

Quick reference guide

Getting started

6

1

f While reviewing a caller ID log

entry, press repeatedly to add or

remove 1 in front of the telephone

number before dialing or saving it

in the directory.

f Press and hold to set or to dial

your voicemail number.

TONE /a>A

f Press to switch to tone dialing

temporarily during a call if you

have pulse service.

f While entering names, press to

change the next letter to upper or

lower case.

/SPEAKER

f Press to make or answer a

home or cell call using the

speakerphone.

f Press to switch between the

speakerphone and the handset.

MUTE/DELETE/VOICE

f During a call, press to mute the

microphone.

f When the handset is ringing,

press to mute the ringer

temporarily.

f While reviewing the caller ID

log, the directory or the redial

memory, press to delete an

individual entry.

f While predialing, press to delete

digits.

f During message or

announcement playback, press

to delete the playing message

or the recorded announcement.

f When the handset is not in

use, press to activate the

voice-controlled application of

connected cell phone.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

6

8

7

5

Quick reference guide

Getting started

7

MENU/SELECT

f When the handset is not in use,

press to show the menu.

f While in the menu, press to

select an item or save an entry

or setting.

CALL BLOCK

f Press to block the incoming call

when the telephone is ringing.

f When on a call, press to block the

call.

f When the handset is not in use,

press to show the call block

menu.

OFF/CANCEL

f During a call, press to hang up.

f While in a menu, press to cancel

an operation, back up to the

previous menu, or exit the menu

display; or press and hold this

button to exit to idle mode.

f When the handset is ringing,

press to mute the ringer

temporarily.

9

f Press and hold while the

telephone is not in use to erase

the missed call indicator.

QUIET# (pound key)

f Press repeatedly to display other

dialing options when reviewing a

caller ID log entry.

f Press and hold to enter the

QUIET mode setting screen, or

to deactivate QUIET mode.

PTT (PUSH TO TALK)

f Press to initiate a one-to-one or

one-to-group broadcast.

f Press and hold to broadcast to a

group of system devices.

REDIAL/PAUSE

f Press repeatedly to view the last

10 numbers dialed.

f While entering numbers, press

and hold to insert a dialing

pause.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

10

11

13

12

14

Quick reference guide

Getting started

8

For complete instructions, refer to the manual provided with your

DLP73210/DLP73410/DLP73440/DLP73540 telephone system. If

you are unable to nd your manual, go to

https://telephones.att.com/manuals to read and/or

download the manual.

Main menu

The selected menu item is

highlighted.

Menu

Feature menu

f Play messages

f Answering sys

f Smart call blk

f Directory

f Caller ID log

f Intercom

f Ringers

f Set date/time

f Caller ID annc

f Settings

Using menus:

1. Press MENU/SELECT in idle mode (when the telephone is not in

use) to enter the main menu.

2. Press CID or DIR to scroll through menu items.

3. Press MENU/SELECT to select or save the highlighted item.

-OR-

Press OFF/CANCEL to cancel an operation, back up to the

previous menu, or exit the menu display.

IMPORTANT INFORMATION

1. Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at https://telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. The power adapter is intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

9

Charger installation

Install the charger, as shown below.

Getting started

Plug the large end of the

charger’s power adapter

into an electrical outlet not

controlled by a wall switch.

Ensure the small end of the charger’s

power adapter is plugged into the power

jack on the bottom of the charger.

10

Battery installation and charging

Install the battery, as shown on page 11. Once you have installed

the battery, the screen indicates the battery status (see the

following table). If necessary, place the handset in the telephone

base or charger to charge the battery. For best performance, keep

the handset in the telephone base or charger when not in use. The

battery is fully charged aer 16 hours of continuous charging. See

the table on page 39 for battery operating times.

If the screen is blank or shows Put in charger and a ashing , you

need to charge the handset without interruption for at least 30

minutes to give the handset enough charge to use the telephone

for a short time. When the battery is low, the handset shows Low

battery and a ashing . If you are on a call in low battery mode,

the handset beeps every minute.

The following table summarizes the battery charge indicators and

actions to take.

Battery indicators Battery status Action

The screen is blank or

shows Put in charger

and ashes.

The battery has no or

very little charge. The

handset cannot be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and

ashes.

Battery has enough

charge to be used for a

short time.

Charge without interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery charged,

place it in the telephone

base or charger when not

in use.

Getting started

Battery installation and charging

Getting started

11

1. Plug the battery connector securely into the socket inside the

handset battery compartment. Insert the supplied battery with

the label THIS SIDE UP facing up, as indicated.

2. Align the cover at against the battery compartment, then slide

it upwards until it clicks into place.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mA

h Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTU

RE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

THIS SIDE UP

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT28334

2 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

IMPORTANT INFORMATION

1. Use only the supplied rechargeable battery or replacement battery

(model BT162342/BT262342). To order, visit our website at

https://telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

2. If you do not use the handset for a long time, disconnect and remove

the battery to prevent possible leakage.

Battery installation and charging

Getting started

12

3. Charge the handset by placing it face forward in the telephone

base or charger. The CHARGE light on the top of the handset is

on during charging.

To replace the battery, press

the tab and slide the battery

compartment cover downwards.

Li out the old battery and

disconnect it from the handset.

Follow the instructions to install

and charge a new battery.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO

NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1

535

Add and register handsets

Before using a new DLP70110 handset, make sure it is registered

with an AT&T DLP73210/DLP73410/DLP73440/DLP73540

telephone system (purchased separately). These telephone

systems can support up to ve handsets.

The handset(s) provided with your telephone system are already

registered as HANDSET 1, and so forth. Additional handsets are

assigned numbers in the sequential order they are registered (up

to HANDSET 5). Each handset must be registered to the telephone

base before use.

Register a handset to your telephone base

1. Before you begin registration, make sure the handset is out of

the telephone base or charger and shows To register... and ...see

manual alternately.

2. Put the handset you wish to register on the telephone base cradle.

Registration and deregistration

13

3. The handset shows Registering.... If the registration is

successful, the handset beeps and its screen displays

Registered. The handset is now registered with the telephone

base.

For registration, put the handset on the

telephone base, not the handset charger.

Add and register handsets

If registration fails, the system will automatically try to register

again. If registration fails aer the third try, Registration failed

appears on the handset screen. The handset shows To register...

and ...see manual alternately, and the telephone base returns to

idle mode. This may take up to ve minutes to occur. Please start

again from Step 1.

Notes:

f You cannot register a handset if any other system handset is in use.

f If you try to register more than five handsets to the telephone base, the telephone base shows

Registration slots are full and sounds two beeps.

Registration and deregistration

14

If it is the rst time you install your AT&T

DLP73210/DLP73410/DLP73440/DLP73540

telephone system, or power returns following

a power outage, the handset and telephone

base will prompt you to set the date and time

when registration is successful.

Aer that, the telephone base will prompt if

you want to set up Smart call blocker* and

the answering system via voice guides. Press

MENU/SELECT on the handset to start. For

details, see the corresponding sections in the

telephone system’s user’s manual. To skip

these settings, press OFF/CANCEL on the

handset.

* Includes licenced Qaltel

TM

technology.

Qaltel

TM

is a trademark of Truecall Group Limited.

Date: MM/DD/YY

ECO

Time: HH:MM -

-

ECO

Voice guide to

set up Ans sys?

Voice guide set

Smart Call Blk?

Deregister handsets

You may need to deregister your handsets if:

f You have ve registered handsets and need to replace a handset.

-OR-

f You wish to change the designated handset number of your

registered handsets.

You must rst deregister ALL handsets, and then register each

handset you wish to use again, one at a time.

Please read carefully through all the instructions on this page

before beginning the deregistration process.

Deregister all handsets from your telephone base

In addition to the cordless handsets, this operation will also

deregister all cordless headsets registered to your telephone base.

1. Make sure that all handsets are out of the telephone base and

chargers before you begin deregistration.

2. Press and hold /FIND HS on the telephone base for about 10

seconds (until the screen shows Deregister all devices?).

Release /FIND HS.

3. Immediately press /FIND HS again. The telephone base shows

Deregistered all devices, and you hear a conrmation tone.

4. It takes up to 10 seconds to complete the deregistration process.

Before registering the handset again, wait for the cordless

handset screen to display To register HS... and ...see manual

alternately.

5. Aer deregistering, register each handset again individually

following the registration instructions on the pages 13-14.

Notes:

f If the deregistration fails, you may need to reset the system and try again. To reset, unplug the power

from the telephone base and plug it back in.

f You cannot deregister the handset(s) if any other system handset is in use.

f Even if the battery is depleted, you can still deregister the handset by following the steps mentioned

above. After the handset is charged for at least 10 minutes, the screen shows To register HS... and

...see manual alternately.

Registration and deregistration

15

Troubleshooting

If you have diculty with your phone, please try the following

suggestions. For Customer Service, visit our website at

https://telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

The handset registration is unsuccessful.

f Follow the handset registration instructions to register the handset

again (see Add and register handsets on pages 13-14).

My telephone doesn’t work at all.

f Make sure the power cord is securely plugged in.

f Make sure you plug the battery connector securely into the

cordless handset.

f Make sure you plug the telephone line cord securely and rmly

into the telephone base and the telephone wall jack.

f Charge the battery in the cordless handset for at least 11 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

f If the battery is depleted, it might take approximately 30 minutes

to charge the handset before it shows Low battery. See page

10 for details.

f Reset the telephone base. Unplug the electrical power. Wait for

approximately 15 seconds, then plug it back in. Allow up to one

minute for the cordless handset and telephone base to reset.

f You may need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages

10-12.

Appendix

16

La page charge ...

AT&T DLP70110 Manuel utilisateur

AT&T DLP70110 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents