Lexmark 810 Series Color Jetprinter Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
www.lexmark.com
810 Series Color Jetprinter™
1
Note: You may need to purchase a USB cable
separately.
Note: You may need to purchase a USB cable
separately.
2
3
7
8
9
21G0077
6
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user documentation, to a
professional service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply cord, during a lightning storm.
10
5
4
11 - 14
Unpack your printer.
Note: Contents may vary
based on geography.
Unpack your printer.
Note: Contents may vary
based on geography.
Connect the power cord.
Connect the power cord.
Make sure the power is on.
Make sure the power is on.
Raise the paper support.
Raise the paper support.
Extend the paper exit tray.
Extend the paper exit tray.
Raise the access cover.
Raise the access cover.
Remove the sticker and tape from the bottom of the print cartridges.
Remove the sticker and tape from the bottom of the print cartridges.
Open the cartridge lids, insert the cartridges, and snap the lids closed.
Open the cartridge lids, insert the cartridges, and snap the lids closed.
Close the access cover.
Close the access cover.
Load paper and adjust the paper guide.
Load paper and adjust the paper guide.
Your printer may include a
photo cartridge instead of a
black print cartridge.
Your printer may include a
photo cartridge instead of a
black print cartridge.
Reminder: Save the print cartridge storage
unit to protect unused cartridges.
Reminder: Save the print cartridge storage
unit to protect unused cartridges.
Before you continue,
remove the photo
cartridge from the print
cartridge storage unit.
Before you continue,
remove the photo
cartridge from the print
cartridge storage unit.
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user documentation, to a
professional service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply cord, during a lightning storm.
Need more ink?
The following cartridges work with your printer.
Need more ink?
The following cartridges work with your printer.
• 31 • 32
• 34
• 33
• 35
13
Windows 2000/XP
Windows 98/Me
14
12
If you inserted the CD and the install screen did not appear (Windows):
1 Click Cancel on any Add New Hardware screens.
2 Eject and reinsert the printer software CD.
If the printer software install screen does not appear:
a From your desktop, double-click My Computer (In Windows XP, click Start
à My
Computer).
b Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
c When the printer software install screen appears, click Install.
d Follow the instructions on the screen to complete the installation.
If you inserted the CD and the install screen did not appear (Mac):
1 From your desktop, double-click the Lexmark 810 Series Installer icon.
2 Double-click Install and follow the instructions on the screen.
If you inserted the CD and the install screen did not appear (Windows):
1 Click Cancel on any Add New Hardware screens.
2 Eject and reinsert the printer software CD.
If the printer software install screen does not appear:
a From your desktop, double-click My Computer (In Windows XP, click Start
à My
Computer).
b Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
c When the printer software install screen appears, click Install.
d Follow the instructions on the screen to complete the installation.
If you inserted the CD and the install screen did not appear (Mac):
1 From your desktop, double-click the Lexmark 810 Series Installer icon.
2 Double-click Install and follow the instructions on the screen.
Make sure your computer is on.
Make sure your computer is on.
Attach the USB cable to your printer and computer.
Attach the USB cable to your printer and computer.
Note: Add New Hardware screens appear only for Windows users. For Macintosh, continue with step 14.
Note: Add New Hardware screens appear only for Windows users. For Macintosh, continue with step 14
Follow the instructions on your screen.
Follow the instructions on your screen.
Insert the CD.
Insert the CD.
Have a question?
• Refer to the User’s Guide.
For Windows:
Click Start
à Programs or All Programs à Lexmark 810 Series à
User’s Guide.
For Mac OS X:
1 From your desktop, double-click the Lexmark 810 Series folder
alias.
2 Double-click the Lexmark 810 Series.help alias.
• Refer to the Lexmark Solution Center software.
1 Click Start
à Programs or All Programs à Lexmark 810
Series à Lexmark Solution Center.
2 Click the Troubleshooting tab on the left side of the screen.
• Visit our Web site: http://support.lexmark.com/
Have a question?
• Refer to the User’s Guide.
For Windows:
Click Start
à Programs or All Programs à Lexmark 810 Series à
User’s Guide.
For Mac OS X:
1 From your desktop, double-click the Lexmark 810 Series folder
alias.
2 Double-click the Lexmark 810 Series.help alias.
• Refer to the Lexmark Solution Center software.
1 Click Start
à Programs or All Programs à Lexmark 810
Series
à Lexmark Solution Center.
2 Click the Troubleshooting tab on the left side of the screen.
• Visit our Web site: http://support.lexmark.com/
Setup Troubleshooting
Setup Troubleshooting
Symptom: Diagnosis: Solution:
The Power light is not lit Is the power cord pushed all the way into the printer? Disconnect the power cord from the wall outlet, and
then from the printer. Reconnect the power cord by
pushing it all the way into the connector on the
printer, and then into the wall outlet.
Is the printer connected to a working electrical outlet? Connect the printer to an electrical outlet that other
electrical devices have been using.
Software will not install Is your operating system compatible with the printer? The printer supports these operating systems:
•Windows 98
•Windows Me
• Windows 2000
•Windows XP
• Mac OS X version 10.1.5
• Mac OS X version 10.2.3 and later
Alignment page or test
page will not print
Is the printer on? Press the Power button. If the Power light does not
come on, see the “The Power light is not lit”
symptom at the beginning of this table.
Do you see an error message on the monitor or
flashing lights on the printer?
See “Error messages troubleshooting” in your
User’s Guide.
Is your printer connected to your computer through
another device, such as a USB hub or switch box?
Disconnect the USB cable from any other devices
and directly connect it between the printer and your
computer. For help, see step 12.
Did you remove the sticker and tape from the bottom of
each print cartridge?
Are the print cartridges installed properly?
Remove the print cartridges, check for the sticker
and tape and then reinsert them. For help, see
step 7 and step 8.
Is the paper loaded correctly? See step 10.
Symptom: Diagnosis: Solution:
The Power light is not lit Is the power cord pushed all the way into the printer? Disconnect the power cord from the wall outlet, and
then from the printer. Reconnect the power cord by
pushing it all the way into the connector on the
printer, and then into the wall outlet.
Is the printer connected to a working electrical outlet? Connect the printer to an electrical outlet that other
electrical devices have been using.
Software will not install Is your operating system compatible with the printer? The printer supports these operating systems:
•Windows 98
•Windows Me
• Windows 2000
•Windows XP
• Mac OS X version 10.1.5
• Mac OS X version 10.2.3 and later
Alignment page or test
page will not print
Is the printer on? Press the Power button. If the Power light does not
come on, see the “The Power light is not lit”
symptom at the beginning of this table.
Do you see an error message on the monitor or
flashing lights on the printer?
See “Error messages troubleshooting” in your
User’s Guide.
Is your printer connected to your computer through
another device, such as a USB hub or switch box?
Disconnect the USB cable from any other devices
and directly connect it between the printer and your
computer. For help, see step 12.
Did you remove the sticker and tape from the bottom of
each print cartridge?
Are the print cartridges installed properly?
Remove the print cartridges, check for the sticker
and tape and then reinsert them. For help, see
step 7 and step8.
Is the paper loaded correctly? See step 10.
P/N 21G0077 E.C. 21G005
© 2004 Lexmark International, Inc. All rights reserved.
11
Important!
Click Cancel on the Add New Hardware screen.
Important!
Click Cancel on the Add New Hardware screen.
-
1
-
2
Lexmark 810 Series Color Jetprinter Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
dans d''autres langues
Documents connexes
-
Lexmark 810 series Install Manual
-
-
-
-
-
-
-
-
Lexmark 22W0000 - P 350 Color Inkjet Printer Manuel utilisateur
-