Windsor NuWave Le manuel du propriétaire

86400820-A 07/24/15

NuWave

Wide Area Vacuum

Operating instructions (ENG)

MODELS: NW

1.012-533.0

From Serial Number (Ref No1*)

*See Serial Number Page

in Spare Parts List

or call manufacturer

2

Warranty Registration

Thank you for purchasing a Kärcher North America product. Warranty registration is quick

and easy. Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to :

http://warranty.karcherna.com/

For customer assistance:

1-800-444-7654

86400820 Operators Manual - NuWave

Machine Data Label

Overview

The NuWave™ is a electric motor powered, wide area vacuum intended for commercial use. The NuWave™

brushes and vacuums debris from carpeted surfaces and stores the collected debris in vacuum bags.

3

Table of Contents

Machine Data Label. . . . . . . . . . . . . . . . . . . . . . . . 2

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3

How To Use This Manual . . . . . . . . . . . . . . . . . . . 4

Safety

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 5

CONSIGNES DE SÉCURITÉ IMPORTANTES . . 6

HAZARD INTENSITY LEVEL. . . . . . . . . . . . . . . . 7

NIVEAU D'INTENSITÉ DU DANGER. . . . . . . . . . 8

Safety Label Location . . . . . . . . . . . . . . . . . . . . . . 9

Grounding Instructions . . . . . . . . . . . . . . . . . . . . 10

Operations

Technical Specifications . . . . . . . . . . . . . . . . . . . 11

Controls & Components . . . . . . . . . . . . . . . . . . . 12

Set Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cleaning Route. . . . . . . . . . . . . . . . . . . . . . . . . . 15

How this Machine Operates . . . . . . . . . . . . . . . . 15

Maintenance

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Brush Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Brush Replacement . . . . . . . . . . . . . . . . . . . . . . 17

Belt Replacement . . . . . . . . . . . . . . . . . . . . . . . . 18

Remove Vac Motor And Filters. . . . . . . . . . . . . . 20

Daily Maintenance . . . . . . . . . . . . . . . . . . . . . . . 21

Regular/periodic Maintenance . . . . . . . . . . . . . . 21

Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . 22

Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . 23

86400820 Operators Manual - NuWave

4

How To Use This Manual

This manual contains the following sections:

• How to Use This Manual

•Safety

• Operations

• Maintenance

• Suggested Spare Parts

The HOW TO USE THIS MANUAL section will tell

you how to find important information for ordering

correct repair parts.

Parts may be ordered from authorized dealers. When

placing an order for parts, the machine model and

machine serial number are important. Refer to the

MACHINE DATA box which is filled out during the

installation of your machine. The MACHINE DATA

box is located on the inside of the front cover of this

manual.

The model and serial number of your machine is

located on the back of the machine.

The SAFETY section contains important information

regarding hazardous or unsafe practices of the

machine. Levels of hazards are identified that could

result in product damage, personal injury, or severe

injury resulting in death.

The OPERATIONS section is to familiarize the

operator with the operation and function of the

machine.

The MAINTENANCE section contains preventive

maintenance to keep the machine and its compo-

nents in good working condition. They are listed in

this general order:

• Belt/Brush Motor

• Vac Motor and Filters

• Vac Motor Carbon Brushes

• Daily Maintenance

• Regular/Periodic Maintenance

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement

parts numbers needed for ordering future parts.

NOTE: The manual part number is located on the

lower right corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

86400820 Operators Manual - NuWave

5

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain. This machine is for dry use only.

Use only as described in this manual. Use only manufacturer's recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return

it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine is not suitable for picking up hazardous dust.

Do not operate this machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and

offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

When the machine is left unattended, ensure that it does not accidentally move.

The machine shall only be operated by instructed and authorized persons.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where the maybe

present.

Do not operate without dust bag and filter in place.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Connect to a properly grounded outlet. See Grounding Instructions.

READ AND SAVE THESE INSTRUCTIONS

86400820 Operators Manual - NuWave

6

Safety

CONSIGNES DE SÉCURITÉ IMPORTANTES

Lors de l'utilisation de cette machine, des précautions de base

doivent toujours être prises, y compris les précautions suivantes :

LIRE TOUTES LES INSTRUCTIONS AVANT D'UTILISER CETTE MACHINE.

Pour réduire le risque d'incendie, d'électrocution ou de

blessure :

N’utiliser cette machine qu’en intérieur. Ne jamais l’utiliser à l’extérieur ou dans la pluie.

N’utiliser cette machine que comme décrit dans le présent manuel. N’utiliser que les composants et les acces-

soires conseillés par le fabricant.

Lorsque la machine ne fonctionnant pas correctement, a fait l’objet d’une chute ou d’une détérioration, a été

laissée à l’extérieur, est tombée dans l’eau, la retourner au centre de service agréé.

Ne pas opérer la machine lorsque les conduits de ventilation sont bloquées. Débarrasser les débris des

conduits, car ils peuvent réduire l’écoulement d’air.

Cette machine n’est pas adaptée au ramassage de poussières dangereuses.

Ne pas l’utiliser près de liquides, de poussières ou de vapeurs inflammables.

Cette machine est destinée à un usage commercial. Elle est recommandée davantage pour les domaines

hôtelier, scolaire, hospitalier, industriel ou pour les bureaux, les chaînes de magasin, que pour un usage domes-

tique normal.

L’entretien et les réparations de la machine doivent être effectuées par un personnel qualifié.

Durant la manoeuvre de la machine, prendre garde aux personnes environnantes et notamment aux enfants.

Lorsque la machine est laissée sans surveillance, s’assurer qu’elle ne se déplace pas de manière acciden-

telle.

Cette machine ne doit être manoeuvrée que par un personnel expérimenté et qualifié.

Lorsque la machine est laissée sans surveillance, la mettre hors tension ou verrouiller l’interrupteur principal

afin d’empêcher un emploi non autorisé.

Ne pas toucher la fiche ou l’appareil lorsque vos mains sont humides.

Ne pas débrancher en tirant sur le cordon. Tirer plutôt la fiche.

Ne pas utiliser si le cordon ou la fiche est endommagé

Ne pas tirer soulever ou traîner l’appareil par le cordon. Ne pas utiliser le cordon comme une poignée, le

coincer dans l’embrasure d’unée porte ou l’appuyer contre des arêtes vives ou des coins.

Ne pas faire rouler l’appareil sur le cordon. Garder le cordon à l’écart des surfaces chaudes.

Ne pas utiliser pour ramasser des liquides inflammables ou combustibles, tels que l'essence ; ne pas utiliser

dans les zones où ceux-ci peuvent être présents.

Ne pas utiliser sans sac à poussière et filtre en place.

Ne pas ramasser quelque chose qui brûle ou fume,comme des cigarettes, des allumettes ou des cendres

chaudes.

Cet appareil ne doit être connecter qu a des prises ayant une sortie de terre. Se reporter aux instructions de

mise à la terre.

LIRE ET CONSERVER CES INSTRUCTIONS

86400820 Operators Manual - NuWave

7

Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR

SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property

damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating

condition. Following is information that signals some potentially dangerous conditions to the operator or the

equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on

the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use

manufacturer approved replacement parts.

86400820 Operators Manual - NuWave

8

Safety

Les symboles suivants sont utilisés dans tout ce manuel, tels que décrits ici :

NIVEAU D'INTENSITÉ DU DANGER

Il existe trois niveaux d'intensité du danger, identifiés par des termes d'avertissement - AVERTISSEMENT,

ATTENTION et POUR VOTRE SÉCURITÉ. Le niveau d'intensité du danger est déterminé par les définitions

suivantes :

AVERTISSEMENT - Les dangers ou des pratiques contraires à la sécurité qui POURRAIENT entraîner des

blessures personnelles ou la mort.

ATTENTION - Les dangers ou des pratiques contraires à la sécurité qui pourraient entraîner des blessures

personnelles légères ou des dégâts sur le produit ou d'autres biens.

POUR DES RAISONS DE SÉCURITÉ : Pour identifier les actions qui doivent être exécutées pour un

fonctionnement sûr de l'équipement.

Signaler immédiatement tout dommage subi par la machine ou fonctionnement défectueux. Ne pas utiliser la

machine si elle ne fonctionne pas correctement. Ci-dessous se trouvent les informations indiquant les condi-

tions potentiellement dangereuses pour l'opérateur ou l'équipement. Lire attentivement ces informations. Être

conscient que ces conditions peuvent survenir. Repérer tous les dispositifs de sécurité sur la machine. Suivre

les étapes nécessaires de formation du personnel qui utilise la machine.

POUR DES RAISONS DE SÉCURITÉ :

NE PAS FAIRE FONCTIONNER LA MACHINE :

Sauf si le personnel est formé et autorisé.

Sauf si le manuel d'utilisation est lu et compris.

Dans des zones inflammables ou explosives.

Dans des zones contenant des objets susceptibles de tomber

LORS DE L'ENTRETIEN DE LA MACHINE :

Éviter les pièces mobiles. Ne pas porter de vêtements, vestes, chemises ou manches vagues lors de l'entretien

de la machine. Utiliser les pièces de rechange approuvées par le fabricant.

86400820 Operators Manual - NuWave

9

Safety

Safety Label Location

NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become

illegible, promptly replace them.

EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉ

REMARQUE : Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout

moment, les étiquettes deviennent illisibles, contactez votre représentant autorisé pour un remplacement rapid

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety. Children should be supervised to

ensure that they do not play with the appliance.

Cet appareil n'est pas prévu à l'usage des personnes (enfants y compris) avec des possibilités physiques,

sensorielles ou mentales réduites, ou le manque d'expérience et de connaissance, à moins qu'ils aient été

donnés la surveillance ou l'instruction au sujet de l'utilisation de l'appareil par une personne chargée de leur

sûreté. Des enfants devraient être dirigés pour s'assurer qu'ils ne jouent pas avec l'appareil.

CONTROL PANEL

README WARNING

86396530

86400820 Operators Manual - NuWave

10

Safety

Grounding Instructions

THIS PRODUCT IS FOR COMMERCIAL USE

ONLY.

Electrical

In the USA this machine operates on a standard 15

amp 115 volt A.C. power circuit. The amp, hertz, and

voltage are listed on the data label found on each

machine. Using voltages above or below those

indicated on the data label will cause serious damage

to the motors

Extension Cords

If an extension cord is used, the wire size must be at

least one size larger than the power cord on the

machine, and must be limited to 50 feet (15.5m) in

length.

Grounding Instructions

This appliance must be grounded. If it should

malfunction or breakdown, grounding provides a path

of least resistance for electric current to reduce the

risk of electric shock. This appliance is equipped with

a cord having an equipment-grounding conductor

and grounding plug. The plug must be inserted into

an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordi-

nances.

120 Volt Models:

This appliance is for use on a nominal 120-volt circuit,

and has a grounded plug that looks like the plug illus-

trated in sketch A. A temporary adapter looks like

adapter illustrated in sketches B and C, may be used

to connect this plug to a 2-pole receptacle as shown

in sketch B if a properly grounded outlet is not avail-

able. The temporary adapter should be used only

until a properly grounded outlet (sketch A) can be

installed by a qualified electrician. The green colored

rigid ear, lug or the like extending from the adapter

must be connected to a permanent ground such as a

properly grounded outlet box cover. Whenever the

adapter is used, it must be held in place by a metal

screw.

Improper connection of the equipment-

grounding conductor can result in a risk of

electric shock. Check with a qualified electrician

or service person if you are in doubt as to

whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it

will not fit the outlet, have a proper outlet

installed by a qualified electrician.

Une connexion non conforme du conducteur de

mise à la terre de l'appareil peut provoquer une

dé charge électrique. Consulter un électricien

qualifié ou une personne du service aprés vente

si vous suspectez que la prise de courant n'est

pas correctement mise à la terre. Ne pas modifier

la fiche fournie avec l'appareil - si elle ne rentre

pas dans la prise, faites installer une prise

apprropriée par un électricien qualifié.

86400820 Operators Manual - NuWave

GROUNDING

GROUNDED

OUTLET

ADAPTER

METAL SCREW

TAB FOR

GROUNDING SCREW

GROUNDED

OUTLET BOX

(A) (B)

(C)

11

Operations

Technical Specifications

Special Notes:

The sound pressure level at the operator's ear was measured to be 74dBA . This was a nearfield, broadband

measurement taken on a carpeted floor. This appliance contains no possible source of impact noise. The

instantaneous sound pressure level is below 63 Pa. The weighted root mean square acceleration at the

operator's arms was measured to be below 2.5m/s2. This was a tri-axial, third-octave-band measurement made

during normal operation on a composite tile floor. The measurement and related calculations were made in

accordance with ANSI S3.34-1986.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety. Children should be

supervised to ensure that they do not play with the appliance.

ITEM DIMENSION/CAPACITY

Rated Amperage (120V) 15 AMPS

Rated Amperage (230V) 7.5 AMPS

Brush Motor 0.5 HP (373 W)

Bag Capacity 792 in³ (13 L)

Brush Two 25.5 in. (647mm) by 4 in. (10 mm) diameter

Brush Speed (120 V) 1550 RPM

Brush Speed (230 V) 1350 RPM

Maximum flow rate of machine 129 cfm (61 L/sec)

Maximum suction of machine 20 inches of water ( 4.97 kPa)

Weight Empty 151 lbs (68 kg)

Tires 9.75 in. (247mm) non-marking

Frame Construction Powder coated steel

ITEM MAXIMUM STORAGE

Height 44 inches (1120 mm) 21 inches (530 mm)

Length 51.5inches (1310 mm) 33 inches (840 mm)

Width 30.5 inches (770 mm) 30.5 inches (770 mm)

WIDTH

LENGTH

86400820 Operators Manual - NuWave

12

Operations

Controls & Components

1. Main Handle

Adjust for operator comfort and storage.

2. Handle Adjustment Lever

Adjusts for operator comfort and storage.

3. Vac on/off switch.

Turns on and off vac motor.

4. Brush Motor Circuit Breaker

Protects brush motor from overheating.

5. Vac Motor Circuit Breakers

Protects the vac motors from overheating.

6. Bag Full Indicator Light

Indicates when filter bag requires replacement or

a clog in the vacuum system ducting.

1

2

86400820 Operators Manual - NuWave

4

6

3

5

13

Operations

7. Intake Filter

Filters intake air for extend vacuum motor life.

8. Filter Bag Cover

Raises to allow access to filter bag and vacuum

motors.

9. Filter Bag Basket

Locates filter bag for maximum fill efficiency and

easy changing.

10. Filter Bag

Lift out easily for service.

11. Accessory Port

Lift port to attach optional accessory hose. Brush

motor will be deactivated during accessory use.

10

9

7

8

11

86400820 Operators Manual - NuWave

14

Operations

Setup

1. Take machine out of storage position by lowering

onto all four wheels.

2. Adjust handle to comfortable position at waist

level by opening adjustment lever on left side of

machine and moving handle. Lock back into

position by closing adjustment lever.

3. Install filter bag inside the main body by pushing

the rubber collar over the chute.

ADJUSTMENT

LEVER

FILTER BAG

INSTALLED

86400820 Operators Manual - NuWave

15

Operations

Cleaning Route

Accessory Port

Cord Hooks

How this Machine Operates

This machine is a portable, easy to use wide area

vacuum designed for use indoors, in a commercial or

light industrial environment.

When operating as a carpet vacuum, soil is lifted from

the carpet surface by two counter-rotating brushes

and carried into a removable bag by the vacuum

motors.

1. Large debris such as paper cups, plates, string,

etc., should be picked up before starting the

cleaning process.

2. Plan your cleaning route to work away from the

electrical source. Move machine forward at a

steady pace.

Cleaning

1. Adjust handle to comfortable position at waist

level or higher.

2. Use your finger to depress the Vacuum switch on

the control panel to activate the vacuum.

3. When using optional accessory tool, brushes will

be deactivated when accessory port is lifted.

Keep machine moving while brush engaged.

Damage to carpet could occur if not moving.

Gardez la machine en mouvement lorsque la

brosse est engagée. Sinon, des dommages

peuvent se produire au tapis.

4. Move forward or backwards at a steady pace for

thorough cleaning. Run machine more slowly

over extremely soiled areas.

5. Use the right side of the machine for edge

cleaning.

6. To keep the vacuum operating at maximum effi-

ciency, check the filter bag regularly. Use the

upper and lower access holes in basket to feel

level of fullness. Empty when 1/2 to 3/4 full.

7. When finished vacuuming, coil the cord by

wrapping around the three cord hooks provided

on the handle tubes and control panel. The upper

hook pivots for easy release of the cord.

FILTER BAG

PIVOT HOOK

86400820 Operators Manual - NuWave

16

Maintenance

Components

1. Primary Drive Belt

2. Brush Motor Assembly

3. Belt Guard

4. Brush Deck Assembly

5. Vacuum Hose

6. Hose Clamp

7. Brush Deck Mounting Bolts

8. Drive Housing Cover Plate

9. Secondary Timing Belt

10. Drive Housing

11. Belt Tensioning Nut

12. Belt Tensioning Bracket

13. Retaining Clips

86400820 Operators Manual - NuWave

1

2

3

4

5

6

7

8

9

10

11

12

13

17

Maintenance

NOTE: The following service items should be

performed by an authorized service facility or

authorized service personnel. All parts referred to in

these instructions can be identified by using the

parts lists and illustrations on the following pages.

Remove machine power cord from electrical

source before making any repairs or adjustments

to the machine.

Retirez le cordon d'alimentation de la machine de

la source électrique avant de procéder à des répa-

rations ou des ajustements de la machine.

Brush Deck

The dual cylindrical brush deck is designed to effi-

ciently extract dirt from the carpet. Please note the

differences between the front/rear brushes. Installing

them in reverse position will significantly reduce the

performance of the machine. The brush part numbers

are marked on drive ends of the brush core as

follows:

8.621-612.0 - Front Brush

8.621-611.0 - Rear Brush

Brushes should be replaced as a set when bristle

length wears to height of yellow PerformAlertTM

bristles.

Brush Removal

The brushes are removed from the right side of the

machine.

1. Adjust handle into the vertical position and lock

the cam lever. Tilt machine on it's back using

handle to support it's position.

2. Pull out on the bottom of the retaining clip.

3. The brush assembly and end cap should drop

down. Then pull the brush down far enough to

clear the bottom of the housing.

4. Pull brush out with a rocking motion to free brush

from drive hub.

Bearing Cleaning

1. Remove bearing cap from end of brush.

2. Clean cap and bearings.

Brush Replacement

1. Make sure the brushes are in the correct position

(front/rear) by following the brush installation

label on the underside of the machine. Lift the

drive side of the brush and push it onto drive hub

until a positive stop is felt. The brush cannot be

installed until the brush is fully seated on the

drive hub.

2. Pull out on the bottom of the retaining clip.

3. Line up end cap with the flats to each side.

4. Slide brush up into retaining clip until it clicks in

place.

86400820 Operators Manual - NuWave

Brush PN: 8.621-611.0

Brush PN: 8.621-612.0

DRIVE END

FRONT BRUSH

REAR BRUSH

BRUSH

INSTALLATION

LABEL

RETAINING

CLIPS

Brush PN: 12543

Brush PN: 1254 0

18

Maintenance

Belt Replacement

The primary drive belt and secondary belt should be

replaced if they are damaged or broken. To

determine if a belt is damaged or broken, there will

be a noticeable drop in the performance of the

machine or the brushes will not spin when the

machine is turned on.

Primary Drive Belt Replacement

The primary drive belt is removed from the under side

of the machine.

1. Unplug power cord.

2. Adjust handle into vertical position and lock cam

lever. Tilt machine on it's back using handle to

support it's position.

3. Remove belt guard by loosening the (2)

mounting screws.

4. Remove brush motor assembly by loosening the

(4) mounting bolts.

5. Remove damaged or broken belt from drive

pulleys and replace with a new drive belt. Be

sure the grooves in the drive belt match the

grooves in the drive pulleys.

6. Install brush motor assembly with new drive belt

to the machine by using the (4) mounting bolts.

With mounting bolts in place but not fully tight-

ened, use weight of the brush motor assembly to

apply proper tension to the drive belt. Once the

belt is properly tensioned, fully tighten the

mounting bolts.

7. Attach belt guard to the frame by using the (2)

mounting screws.

8. Plug machine into a power supply and turn it on

to assure the machine is running properly.

86400820 Operators Manual - NuWave

19

Maintenance

Secondary Belt Replacement

The secondary belt can be accessed from the under

side of the machine.

1. Unplug power cord.

2. Adjust handle into the vertical position and lock

the cam lever. Tilt machine on it's back using the

handle to support it's position.

3. Remove belt guard by loosening the (2) mounting

screws.

4. Loosen the 4 mounting bolts for brush motor

assembly to relieve primary drive belt tension. Do

not fully remove the (4) mounting bolts. Remove

primary drive belt from the brush deck pulley.

5. Remove brush deck assembly by loosening the 4

mounting bolts that attach it to the linkage arms

(2) bolts on the right side and (2) on the left side).

With the brush deck assembly removed, detach

vacuum hose from the nozzle by loosening hose

clamp.

6. The secondary belt can now be accessed on the

right side of brush deck assembly by removing

the (4) screws that mount the drive housing

cover/plate.

7. Loosen nut on the belt tensioning bracket and

remove damaged/broken belt. Install new

secondary belt in the same configuration.

8. Apply tension to belt by pressing thumb tab on

belt tensioning bracket. Tighten the nut on belt

tensioning bracket until proper tension is

achieved. Test belt by spinning brushes. Brushes

should spin easily without excessive friction.

9. Replace drive housing cover/plate, reattach the

vacuum hose to nozzle, and reassemble brush

deck to machine by using the (4) mounting bolts

(2) on right side and (2) on left side.

10. Reattach primary drive belt to brush deck pulley

making sure the grooves line up properly. Apply

proper tension to primary drive belt and tighten

the (4) mounting bolts on brush motor

assembly.Reattach primary belt guard.

11. Plug machine into a power supply and turn it on

to assure the machine is running properly.

86400820 Operators Manual - NuWave

20

Maintenance

Remove Vac Motor And Filters

1. Unplug power cord.

2. Open cover.

3. Remove (6) screws from vacuum motor retaining

plate.

4. Remove (8) screws from vac motor brackets, (4)

each bracket.

5. Lift vacuum motors out of machine body.

Vacuum Motor Carbon Brushes

Replacement

If armature commutator is grooved, extremely pitted

or not concentric, the motor will need to be replaced

or sent to a qualified service center.

Important:

These brushes wear quicker as the length shortens

due to increased heat. Spring inside brush housing

will damage motor if brushes are allowed to wear

away completely.

Periodically check the length of the carbon brushes.

Replace both carbon brushes when either is less

than 3/8" (9.5mm) long.

3

8

[9.5mm]

86400820 Operators Manual - NuWave

Carbon

Brushes

La page charge ...

Windsor NuWave Le manuel du propriétaire

Windsor NuWave Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents