Skil PM4910-00 Le manuel du propriétaire

WARNING: To reduce the risk of injury, the user must read and understand the

Owner’s Manual before using this product. Save these instructions for future reference.

AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et

comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide

afin de pouvoir le consulter ultérieurement.

ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender

el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para

consultarlas en caso sea necesario.

Owner’s Manual

Guide d’utilisation

Manual del propietario

For Customer Service

Pour le service à la clientèle

Servicio al cliente 1-877-SKIL-999 OR www.skil.com

40V 20" Brushless Lawn Mower

Tondeuse à gazon sans balais 40 V, 50,8 cm (20 po)

Cortadora de césped sin escobillas de 40 V de 20 pulgadas

Model/ Modelo/ Modèle: PM4910-00 / SM4910-00

2

TABLE OF CONTENTS

Safety Rules for Cordless Lawn Mower ...........................3-6

Symbols ....................................................7-10

Get to Know Your Lawn Mower ...................................11

Specications .................................................12

Accessory .................................................12-13

Assembly ..................................................14-17

Operating Instructions .......................................18-23

Maintenance ................................................ 24-31

Troubleshooting ............................................32-33

Limited Warranty of SKIL Consumer Tool ...........................34

WARNING

• Some dust created by power sanding, sawing, grinding, drilling and other construction

activities contains chemicals known to the State of California to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

–Lead from lead-based paints.

–Crystalline silica from bricks, cement, and other masonry products.

–Arsenic and chromium from chemically-treated lumber.

• Your risk from these exposures varies, depending upon how often you do this type of work.

To reduce your exposure to these chemicals:

–Work in a well-ventilated area.

–Work with approved safety equipment, such as dust masks that are specially designed to

lter out microscopic particles.

–Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and

other construction activities. Wear protective clothing and wash exposed areas with soap

and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote

absorption of harmful chemicals.

3

SAFETY RULES FOR CORDLESS LAWN MOWER

DANGER This machine was built to be operated according to the rules for safe

operation included in this manual. As with any type of power equipment,

carelessness or error on the part of the operator can result in serious injury. This machine is

capable of amputating hands and feet and throwing objects. Failure to observe all safety

instructions could result in serious injury or death.

WARNING When using electric lawn mowers, basic safety precautions should always

be followed to reduce the risk of re, electric shock, and personal injury.

These basic precautions include the following:

Children

Tragic accidents can occur if the operator is not alert to the presence of children.

Children are often attracted to the mower and mowing activity. They do not understand the

dangers. Never assume that children will remain where you last saw them.

• Keep children out of the mowing area and under the watchful care of a responsible adult

other than the operator.

• Be alert and turn the mower off if a child enters the area.

• Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects

that may obscure your vision of a child who may run into the mower.

• Never allow children under 14 years old to operate a power mower. Children 14 years old

and over should read and understand the operation instructions and safety rules in this

manual and should be trained and supervised by a parent. Only responsible individuals who

are familiar with these rules of safe operation should be allowed to use this machine.

Operation

General Operation:

• Read this operator’s manual carefully in its entirety before attempting to assemble this

machine. Read, understand, and follow all instructions on the machine and in the manuals

before operation. Be completely familiar with the controls and proper use of this machine

before operating it. Keep this manual in a safe place for future and regular reference.

• Use the right appliance – Do not use the lawn mower for any job except that for which it is

intended. Your lawn mower has been designed to perform only one job: to mow grass.

• Don’t overreach – Keep proper footing and balance at all times.

• Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn

should always be carefully examined and cleared of all objects prior to each mowing.

• Keep the area of operation clear of all persons, particularly small children, and pets.

• Before and while moving backwards with the mower, look behind and down for small

children and other people.

• Keep clear of the discharge opening at all times.

• This machine is a precise piece of power equipment, not a plaything. Therefore, exercise

extreme caution at all times. Your unit has been designed to perform one job: to mow grass.

Do not use it for any other purpose.

• Don’t force the lawn mower – it will do the job better and more safely at the rate for which it

was designed.

• Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks,

wire, toys and other foreign objects that could be tripped over or picked up and thrown by

the blade. Thrown objects can cause serious personal injury.

• Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders

and the like. Also, avoid discharging material against walls or obstructions, which may cause

4

discharged material to ricochet back toward the operator.

• To help avoid blade contact or an injury from thrown objects, stay in the operator zone

behind the handles and keep children, bystanders, helpers and pets at least 100 feet (30m)

from the mower while it is in operation. Stop the machine if anyone enters the area.

• Always wear safety glasses or safety goggles during operation and while performing an

adjustment or repair to protect your eyes. Thrown objects that ricochet can cause serious

injury to the eyes. Always use a face or dust mask if the operation is dusty.

• Dress properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.

Use of rubber gloves and footwear is recommended when working outdoors. Wear sturdy,

rough-soled work shoes and close-tting slacks and shirts. Shirts and pants that cover the

arms and legs and steel-toed shoes are recommended. Never operate this machine in bare

feet, sandals, slippery or lightweight (e.g., canvas) shoes.

• Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade

can amputate hands and feet.

• A missing or damaged discharge cover can cause blade contact or injuries from thrown

objects.

• Many injuries occur as a result of the mower being pulled over the foot during a fall caused

by slipping or tripping. Do not hold onto the mower if you are falling; immediately release the

handle.

• Never pull the mower back toward you while you are walking. If you must back the mower

away from a wall or obstruction, rst look down and behind you to avoid tripping, and then

follow these steps:

– Step back from mower to fully extend your arms.

– Be sure you are well balanced with sure footing.

– Pull the mower back slowly, no more than half way toward you.

– Repeat these steps as needed.

• Do not operate the mower while under the inuence of alcohol or drugs.

• Stay alert – watch what you are doing. Use common sense. Do not operate the lawn mower

when you are tired.

• The motor/blade control handle is a safety device. Never attempt to bypass its operation.

Doing so makes the safety device inoperative and may result in personal injury through

contact with the rotating blade. The motor/blade control handle must operate easily in both

directions and automatically return to the disengaged position when released.

• Avoid dangerous environments – Don’t use lawn mowers in damp or wet locations so as to

avoid slipping and falling during operation.

• Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel

you are losing your footing, release the motor/blade control handle immediately and the

blade will stop rotating within three seconds.

• Mow only in daylight or good articial light. Walk, never run while operating.

• Stop the blade when crossing gravel drives, walks or roads.

• If the equipment should start to vibrate abnormally, immediately stop the motor, remove the

battery and check for the cause. Vibration is generally a warning of trouble.

• Never operate the mower without the proper trailing shield, discharge cover, grass bag,

mulching insert, side discharge chute, motor/blade control handle or other safety protective

devices in place and working. Never operate the mower with damaged safety devices.

Failure to do so can result in personal injury.

• Always stop the motor before making adjustments to a wheel or a cutting-height adjustment.

• If situations occur that are not covered in this manual, use care and good judgment. Contact

SKIL Customer Service for assistance.

5

• Use only the charger supplied by the manufacturer to recharge.

• Do not charge the battery pack outdoors.

• Do not charge the battery pack in rain or in wet locations.

• Use the lawn mower only with specically designated battery pack. Use of any other

batteries may create a risk of re.

• Use only with battery packs and chargers listed below.

Battery Charger

BY8705-00

BY8708-00

SC5364-00

SC5376C-00

Operation On A Slope:

Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury.

Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it. For

your safety, use the slope gauge in this manual to measure slopes before operating this unit

on a sloped or hilly area. If the slope is greater than 15 degrees, do not mow it.

Do:

• Mow across the face of slopes; never mow up and down. Exercise extreme caution when

changing direction on slopes.

• Watch for holes, ruts, rocks, hidden objects, or bumps which can cause you to slip or trip.

Tall grass can hide obstacles.

Do not:

• Do not mow near drop-offs, ditches or embankments; you could lose your footing or balance.

• Do not mow slopes greater than 15 degrees, as shown on the slope gauge.

• Do not mow on wet grass. Unstable footing could cause slipping.

Service

WARNING Grass bag components, the discharge cover, side discharge chute,

mulching insert and trailing shield are subject to wear and damage, which

could expose moving parts or allow objects to be thrown and could increase the risk of injury.

For safety protection, frequently check all components and replace damaged components

immediately with identical replacement parts. Contact SKIL Customer Service for assistance.

• Remove or disconnect the battery pack before servicing, cleaning, or removing material from

the lawn mower.

• Do not wash the mower with a hose; avoid getting water in the motor and electrical

connections.

• Before cleaning the machine, turn the motor off and wait until the blade comes to a complete

stop, then remove the battery pack. The cutting blade continues to rotate for a few seconds

after the motor is shut off. Never place any part of the body in the blade area until you are

sure the blade has stopped rotating. Then unclog the chute or remove or replace the grass

bag, or mulching insert.

• Follow instructions for lubricating and changing accessories.

• Keep handles dry, clean and free from oil and grease.

• To reduce a re hazard, keep the motor cover free of grass, leaves and debris build-up.

• Check the blade and motor mounting bolts at frequent intervals for proper tightness. Also,

visually inspect the blade for damage (e.g., bending, cracking and wear.). Replace the blade

only with the identical replacement blade.

6

• Maintain your mower with care – keep the mower blade sharp and clean for the best and

safest performance. Mower blades are sharp and can cut. Wrap the blade or wear gloves

and use extra caution when servicing it.

• Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.

• Never remove or tamper with safety devices. Regularly check their proper operation.

Never do anything to interfere with the intended function of a safety device or to reduce the

protection provided by a safety device.

• After striking a foreign object, stop the motor, remove the battery pack, allow the blade to

stop rotating, and thoroughly inspect the mower for any damage. Repair the damage before

operating the mower.

• Remove the battery and store the idle lawn mower in a covered area when not in use. Allow

the motor to cool before storing it in any enclosure. The lawn mower should be stored in a

dry, high, or locked-up enclosure, out of reach of children.

• Maintain or replace safety and instruction labels, as necessary.

• Do not incinerate the appliance even if it is severely damaged. The batteries can explode in

a re.

• Do not expose a battery pack or tool to re or excessive temperature. Exposure to re or

temperature above 212 °F (100°C) may cause explosion.

• When servicing, use only identical replacement parts. Use of parts that do not meet the

original equipment specications may lead to improper performance and compromised

safety.

• SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others

who may use this tool. If you lend this tool to someone else, also lend these instructions to

them to prevent misuse of the product and possibly injury.

SAVE THESE INSTRUCTIONS!

7

SYMBOLS

Safety Symbols

The purpose of safety symbols is to attract your attention to possible dangers. The safety

symbols and the explanations with them deserve your careful attention and understanding.

The symbol warnings do not, by themselves, eliminate any danger. The instructions and

warnings they give are no substitutes for proper accident prevention measures.

WARNING Be sure to read and understand all safety instructions in this Owner’s

Manual, including all safety alert symbols such as “DANGER,”

“WARNING,” and “CAUTION” before using this tool. Failure to following all instructions listed

below may result in electric shock, re, and/or serious personal injury.

The denitions below describe the level of severity for each signal word. Please read the manual

and pay attention to these symbols.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER DANGER indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING WARNING indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous

situation which, if not avoided, will result in minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could lead to equipment

or other property damage if they are not followed. Each message is preceded by the word

“NOTICE”, as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are not followed.

WARNING The operation of any power tools can result in foreign

objects being thrown into your eyes, which can result

in severe eye damage. Before beginning power tool operation, always

wear safety goggles or safety glasses with side shields and a full face

shield when needed. We recommend a Wide Vision Safety Mask for use

over eyeglasses or standard safety glasses with side shields. Always

use eye protection which is marked to comply with ANSI Z87.1.

8

SYMBOLS (CONTINUED)

IMPORTANT: Some of the following symbols may be used on your tool. Please study them

and learn their meaning. Proper interpretation of these symbols will allow you to operate the

tool better and more safely.

Symbol Name Designation/Explanation

V Volts Voltage (potential)

AAmperes Current

Hz Hertz Frequency (cycles per second)

WWatt Power

kg Kilograms Weight

min Minutes Time

s Seconds Time

Wh Watt-hours Battery capacity

Ah Ampere-Hours Battery capacity

ØDiameter Size of drill bits, grinding

wheels, etc.

n0No load speed Rotational speed, at no load

nRated speed Maximum attainable speed

…/min Revolutions or reciprocation per

minute

Revolutions, strokes, surface

speed, orbits, etc. per minute

IPX4 Ingress Protection Degree Protection from splashing water

Arrow Action in the direction of arrow

Alternating current Type or a characteristic of

current

Direct current Type or a characteristic of

current

Maintain Safety Devices Do not open or remove safety

shields while the tool is running.

Look Behind While Backing

Look down and behind rst

to avoid tripping when pulling

back.

DANGER - Keep Bystanders

Away

Do not mow when children or

others are nearby.

9

Symbol Name Designation/Explanation

KEEP HANDS and FEET AWAY

GARDEZ VOS MAINS et VOS PIEDS À DISTANCE

MANTENGA LAS MANOS Y LOS PIES ALEJADOS

DANGER - Keep Hands and

Feet Away

To reduce the risk of injury,

keep hands and feet away from

rotating parts. Do not operate

unless discharge cover or grass

bag is in its proper place. If

damaged, replace immediately.

DANGER – Thrown Debris

Remove objects that can be

thrown by the blade in any

direction. Wear safety glasses.

DANGER - Steep Slope Hazard

Use extra caution on slopes. Do

not mow slopes greater than 15

degrees.

Li-ion RBRC seal Designates Li-ion battery

recycling program

Read manual symbol Alerts user to read manual

Wear eye protection symbol

Always wear safety goggles or

safety glasses with side shields

and a full face shield when

operating this product.

10

SYMBOLS (CERTIFICATION INFORMATION)

IMPORTANT: Some of the following symbols for certication information may be used on your

tool. Please study them and learn their meaning. Proper interpretation of these symbols will

allow you to operate the tool better and more safely.

Symbol Designation/Explanation

This symbol designates that this tool is listed by Underwriters Laboratories.

This symbol designates that this component is recognized by

Underwriters Laboratories.

This symbol designates that this tool is listed by Underwriters

Laboratories, to United States and Canadian Standards.

This symbol designates that this tool is listed by the Canadian

Standards Association.

This symbol designates that this tool is listed by the Canadian

Standards Association, to United States and Canadian Standards.

This symbol designates that this tool is listed by the Intertek Testing

Services, to United States and Canadian Standards.

This symbol designates that this tool complies to NOM Mexican

Standards.

11

GET TO KNOW YOUR LAWN MOWER

Self-Propel Lever (SM4910-00 only)

Self-Propel Speed-Adjustment Knob (SM4910-00 only)

Handle

Side Rail

Bail Switch (Switch Lever)

Battery-Pack Cover

Front Wheel Deck Cover

Limit Switch

Rear Wheel

Safety Button

Handle-Locking

Clamp

Grass Bag

Cutting-Height

Adjustment Lever

Mower Deck

Mulching Insert

Rear-Discharge

Door

Trailing Shield

Rear Handle

Handle-Adjustment Knob

Fig. 1

12

SPECIFICATIONS

Model No. PM4910-00 SM4910-00

Self-Propel System No Yes

Rated voltage 40V d.c.

No-load Speed 2600 RPM

Cutting Height 1-1/2’’ ~ 4’’

Cutting-Height Positions 7 Settings

Deck Size 20’’ (510mm)

Grass-Bag Volume 1.7 Bushel (60L)

Recommended working temperature 32~104°F (0~40°C)

Recommended storage temperature 32~104°F (0~40°C)

ACCESSORY

WARNING The following part is subjected to be worn out from normal use. Use only

identical replacement parts listed below. Use of parts that do not meet the

original equipment specications may lead to improper performance and compromised safety.

Part Name Model Number

20” Lawn Mower Blade SMB2000

Safety Button

The safety button must be pressed down before the motor can be started.

Bail Switch

The bail switch is located on the upper handle of the mower. The switch engages and

disengages the motor/ blade.

Limit Switch

The limit switch can prevent the mower from working accidentally when the handle is in the

locked storage position. The limit switch would be triggered and disengage the motor/ blade

when turning the handle to the locked storage position.

WARNING The bail switch and the safety button are safety devices. Never

attempt to bypass their operations.

Self-Propel Lever (model SM4910-00 only)

Turns the self-propel function ON and OFF.

Self-Propel Speed-Adjustment Knob (model SM4910-00 only)

Increases or decreases the self-propel speed by turning the adjustment knob.

Handle-Locking Clamp

Locks/unlocks the side rails in the extended or the recessed position.

13

Side Rails

Can be extended and locked for operation or recessed for storage.

Handle-Adjustment Knob

Locks/unlocks the handle position when adjusting the angle of the mower handle:

1. Locked Storage Position

2. Upper Operating Position

3. Middle Operating Position

4. Lower Operating Position

Trailing Shield & Rear Discharge Door

The trailing shield is designed to minimize stones or other objects being thrown backward by

the mower blade. The shield and the rear discharge door minimize the possibility of accidental

foot contact with the blade. DO NOT operate the mower without the trailing shield and rear

discharge door in place.

Spring-Loaded Cutting-Height Adjustment Lever

One-handed cutting-height adjustment.

14

ASSEMBLY

WARNING To prevent accidental starting that could cause serious personal

injury, always remove the battery pack from the tool when assembling

parts, making adjustments, cleaning, or when not in use.

WARNING Do not attempt to modify this tool or create accessories not

recommended for use with this tool. Any such alteration or modication

is misuse and could result in a hazardous condition leading to possibly serious injury.

WARNING Do not use any attachments or accessories not recommended by the

manufacturer of this product. The use of attachments or accessories not

recommended can result in serious personal injury.

Unpacking

• First remove all the accessories from the carton, then grasp both the front part of the deck

cover and the rear handle at the same time to carefully lift the mower up and out of the

carton.

• Inspect the product carefully to make sure that no breakage or damage occurred during

shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily

operated the mower.

• If any parts are damaged or missing, please return the mower to the place of purchase.

Assemble the Grass Bag

1. Check the grass bag before assembling, to make sure that there is no damage.

2. Remove the rubber protection tubing for the grass bag hooks (Fig. 2).

3. Slide the grass bag onto the frame (Fig. 2).

4. Assemble the top clips to the frame (Fig. 3), then assemble the two side clips. Assemble

the bottom clip last.

5. The completely assembled grass bag is shown in Fig. 4.

Fig. 2 Fig. 3 Fig. 4

Clips

15

Adjust the Foldable Handle

WARNING Do not attempt to start the mower until the handle has been locked at one

of the three preset operating positions.

1. Locked Storage Position: Your mower is shipped with the handle in the compact, locked

position (Fig. 5).

Fig. 5 Upper Operating Position

Middle Operating

Position

Locked Storage

Position Lower Operating

Position

2. Upper Operating Position: Turn the two

handle-adjustment knobs to the unlock

position (Fig. 6). Lift the handle with one

hand, then gently pivot the handle back-

ward to the upper operating position. Turn

the two handle-adjustment knobs back

to the locked position (Fig. 6) and make

sure that the lock pin has engaged in the

upper operating position. Open the two

handle-locking clamps and fully extend the

side rails (Fig. 7). Securely close the two

handle-locking clamps (Fig. 8). Taller users

may prefer this position.

Fig. 7 Fig. 8

Fig. 6

Unlock Position Locked Position

16

3. Middle Operating Position: Turn the two handle adjustment knobs to the unlock position.

Gently pivot the handle downward to the middle operating position. Turn the two handle-

adjustment knobs back to the locked position and make sure that the lock pin has engaged

in the middle operating position. Open the two handle-locking clamps and fully extend the

side rails. Securely close the two handle-locking clamps.

4. Lower Operating Position: Turn the two handle-adjustment knobs to the unlock position.

Gently pivot the handle downward to the lower operating position. Turn the two handle-

adjustment knobs back to the locked position and make sure that the lock pin has engaged

in the lower operating position. Open the two handle-locking clamps and fully extend the

side rails. Securely close the two handle-locking clamps.

NOTE: The motor cannot be started unless:

a) The side rails are fully extended.

b) Both handle-locking clamps are securely closed.

c) The handle is locked into one of the three operating positions.

Attach/Remove the Grass Bag

WARNING Do not at any time make

any adjustment to the

lawn mower without rst stopping the

motor, removing the battery pack, and

waiting for the blade to stop rotating.

NOTICE: Remove the mulching insert before

attaching the grass bag to the mower.

1. Remove the battery pack.

2. Adjust the handle to the locked storage

position.

3. Lift the rear-discharge door.

4. Hook the grass bag assembly on the pivot

rod (Fig. 9). Release the discharge door so

that it rests on the grass bag.

5. To remove the grass bag, lift the rear-discharge door on the mower. Lift the grass bag up,

off of the pivot rod.

6. Release the discharge door.

WARNING When using the grass bag, never operate the mower unless the hooks on

the grass bag are rmly seated on the pivot rod and the rear-discharge

door rests rmly against the top of the grass bag.

WARNING Under normal usage, bag material is subject to wear. To reduce the risk of

injury, frequently inspect the bag assembly and replace if there are any

signs of wear or deterioration. Use only grass bags manufactured for this mower.

Fig. 9 Rear Discharge

Door

Hook

17

Attach/Remove the Mulching

Insert

WARNING Do not at any time make

any adjustment to the

lawn mower without rst stopping the

motor, removing the battery pack, and

waiting for the blade to stop rotating.

1. Remove the battery.

2. Lift the rear-discharge door.

3. Grasp the handle of the mulching insert

and fully insert it into the mower, so that it

is securely seated (Fig. 10).

4. To remove the mulching insert, lift the

rear-discharge door, grasp the handle of

the mulching insert, and pull it out.

5. Release the discharge door and make sure it rests rmly against the mulching insert.

NOTICE: The mulching insert must be removed in order to install and use the grass bag.

Fig. 10

18

OPERATING INSTRUCTIONS

WARNING To reduce the risk of re, personal injury, and product damage due to

a short circuit, never immerse your tool, battery pack, or charger in

uid or allow a uid to ow inside them. Corrosive or conductive uids, such as seawater,

certain industrial chemicals, and bleach or bleach-containing products, etc. can cause a short

circuit.

WARNING If any parts are damaged or missing, do not operate this product until

the parts are replaced. Use of this product with damaged or missing parts

could result in serious personal injury.

WARNING Always wear eye protection with side shields marked to comply with

ANSI Z87.1. Failure to do so could result in objects being thrown into your

eyes and other possible serious injuries.

WARNING Do not allow familiarity with this product to make you careless.

Remember that a careless fraction of a second is sufcient to inict

serious injury.

Before each use, inspect the entire product for damaged, missing, or loose parts, such as

screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this

product until all missing or damaged parts are replaced.

Adjust the Cutting Height (Fig. 11)

WARNING Do not at any time make

any adjustment to the

lawn mower without rst stopping the

motor, removing the battery pack, and

waiting for the blade to stop rotating.

WARNING Keep your feet away from

the deck when adjusting

its height.

The mower can be set to any of 7 cutting

heights between 1-1/2’’ and 4’’. Choose the

proper cutting height according to the type and

condition of the grass.

1. Use one hand to hold the nearby handle

tube for stability and use the other hand

to move the cutting-height adjustment lever outwards from the slots in the cutting-height

indication plate.

2. Move the cutting-height adjustment lever toward the back of the mower for a higher cutting

height; move it toward the front of the mower for a lower cutting height.

3. Once arriving at the desired cutting-height position, engage the cutting-height adjustment

lever back into the slot.

Fig. 11

Cutting-Height

Adjustment Lever

19

Attach/Detach Battery Pack

(Fig. 12)

WARNING Battery tools are always

in operating condition.

Therefore, remove the battery when

assembling parts, making adjustments,

cleaning, when the tool is not in use, or

when carrying it at your side. Removing the

battery pack will prevent accidental starting

that could cause serious personal injury.

1. The battery-pack cover is hinged. Raise

the battery-pack cover by lifting the front of

the cover.

2. Align the grooves in the battery pack with

the raised ribs in the mower’s battery

compartment. Then insert the battery pack into the compartment.

3. Push the battery pack until you hear a “click”. The battery-release button will spring up

when the battery pack is securely attached.

4. To detach the battery pack, depress the battery-release button to release the battery pack,

and then lift it out of the compartment.

5. Close the battery pack cover.

NOTICE: Make sure that the latch on the mower snaps into place and that the battery pack is

secured to the mower before starting operation.

Start/Stop the Mower

WARNING The operation of any lawn mower can result in foreign objects being thrown

into your or others’ eyes, which can damage eyes severely. Always wear

safety glasses while operating the mower or while performing any adjustments or repairs on

the mower.

WARNING Ensure that other people and pets remain at least 100’ (30m) away from

the mower when it is in use.

WARNING The blade will continue to rotate for a few seconds after the mower is

turned off. Allow the motor/blade to stop rotating before starting it again.

Do not rapidly turn the mower off and on.

CAUTION Do not attempt to override the operation of the safety button and bail

switch.

NOTICE: The motor cannot be started unless:

• The side rails are fully extended.

• Both handle-locking clamps are securely closed.

• The handle is locked into one of the three operating positions.

Fig. 12

Battery

Pack Cover

Battery-Release

Button

20

To start the mower (Fig. 13)

1. Attach the battery pack to the mower and close the battery-pack cover.

2. Depress the safety button.

3. With the safety button depressed, pull the bail switch upward to meet the handle. The

mower will start.

4. Release the safety button.

To stop the mower (Fig. 14)

1. Fully release the bail switch.

2. The electric brake will stop the blade rotation within 3 seconds of the bail switch release.

Fig. 13 Fig. 14

Safety

Button

Bail Switch

Self-Propel System (model

SM4910-00 only)

The SM4910-00 mower is equipped with self-

propel function. This system is independent of

the blade On-Off switch and it is not dependent

on blade rotation. For example, when you have

completed cutting your lawn, you can use the

self-propel to propel the mower back to your

storage location without blade rotation. You

may also choose to operate the mower as a

non-self-propelled mower to maximize battery

running time.

To operate the self-propel system without

blade rotation, pull the self-propel lever to the

handle.

To turn the self-propel off, release the self-propel trigger (Fig. 15).

The system has a speed-adjustment knob.

Rotate the knob to adjust the mower self-propel speed according to your need.

To operate with the blade rotating for cutting:

1. Depress the safety button.

2. With the safety button depressed, pull the bail switch upward to the handle and release

the safety button.

Fig. 15 Self-Propel Lever

Self-Propel Speed Adjustment Knob

La page charge ...

Skil PM4910-00 Le manuel du propriétaire

Skil PM4910-00 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents