Harmonic ProStream 9000 17.6 Guide d'installation

Marque: Harmonic

Modèle: ProStream 9000 17.6

Taper: Guide d'installation

Rev A

PROSTREAM® 9100

RELEASE 17.6

Installation Guide

November 2016

Harmonic, the Harmonic logo, [all other Harmonic products mentioned] are trademarks, registered trademarks or service marks of Harmonic Inc. in the

United States and other countries. All other trademarks are the property of their respective owners. All product and application features and specifications

are subject to change at Harmonic's sole discretion at any time and without notice.

Disclaimer

Harmonic reserves the right to alter the product specifications and descriptions in this publication without prior notice. No part of this publication shall be

deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty. The information contained herein

is merely descriptive in nature, and does not constitute a binding offer for sale of the product described herein. Harmonic assumes no responsibility or

liability arising from the use of the products described herein, except as expressly agreed to in writing by Harmonic. The use and purchase of this product

does not convey a license under any patent rights, copyrights, trademark rights, or any intellectual property rights of Harmonic. Nothing hereunder

constitutes a representation or warranty that using any product in the manner described herein will not infringe any patents of third parties.

Third-Party Product Trademarks

Adobe® After Effects®, Photoshop®, Flash® Professional, Premiere®

Avid® Media Composer®

Jünger Audio™

Apple® QuickTime®

Microsoft® Mediaroom®

Microsoft® PlayReady®

DOCSIS® 3.0

Start Over® TV

Dolby is a registered trademark of Dolby Laboratories. Dolby Digital, Dolby Digital Plus, Dolby Plus, aacPlus, AC-3, and Dolby® E are trademarks of Dolby

Laboratories.

Level Magic and Jünger are trademarks of Jünger Audio Studiotechnik GmbH.

MPEG Audio technology licensed from Fraunhofer IIS http://www.iis.fraunhofer.de/amm/

PitchBlue® is a registered trademark of Vigor Systems.

QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom.

Third-Party Copyright Notes

Harmonic software uses version 3.15.4 of the FreeImage open source image library under FreeImage Public License (FIPL). See http://

freeimage.sourceforge.net for details.

The product may include implementations of AAC and HE-AAC by Fraunhofer IIS; and MPEG Audio technology licensed from Fraunhofer IIS

The software described in this publication may use version 2.8 of FFmpeg open source package under Lesser General Public License (LGPL).

The software described in this publication is furnished under a nondisclosure agreement, or the License Agreement and Limited Warranty stated below, and

the end user license agreement (which is furnished with the software), which may have additional terms. The software may be used or copied only in

accordance with the terms of those agreements. By using the software, you acknowledge you have read the end user license agreement and the License

Agreement and Limited Warranty provision.

The product described in this publication may be covered by one or more of U.S. Patents, their foreign counterparts and pending patent applications.

The product is distributed with certain other software that may require disclosure or distribution of licenses, copyright notices, conditions of use, disclaimers

and/or other matter. Use of this product or otherwise fulfilling their conditions constitutes your acceptance of it, as necessary. Copies of such licenses,

notices, conditions, disclaimers and/or other matter are available in any one of the following locations: the LEGAL NOTICES AND LICENSES section of the

documentation directory of the product, user guide, or by contacting us at [email protected].

Notice

Information contained in this publication is subject to change without notice or obligation. While every effort has been made to ensure that the information is

accurate as of the publication date, Harmonic Inc. assumes no liability for errors or omissions. In addition, Harmonic Inc. assumes no responsibility for

damages resulting from the use of this guide.

License Agreement and Limited Warranty

1. AGREEMENT: This is a legal agreement ("Agreement") between you ("you" or "your") and Harmonic, or its appropriate local affiliate ("Harmonic", "we",

"us" or "our"). Use of our product(s) and any updates thereto purchased or validly obtained by you (the "Products"), and/or the Software (as defined below)

(collectively, the "System"), constitutes your acceptance of this Agreement. "Use" includes opening or breaking the seal on the packet containing this

Agreement, installing or downloading the Software as defined below or using the Software preloaded or embedded in your System. As used herein, the term

"Software" means the Harmonic owned software and/or firmware used in or with the Products and embedded into, provided with or loaded onto the

Products in object code format, but does not include, and this Agreement does not address, any third-party or free or open source software separately

licensed to you ("Third Party Software"). If you do not agree to this Agreement, you shall promptly return the System with a dated receipt to the seller for a full

refund.

2. LICENSE: Subject to the terms and conditions of this Agreement (including payment), we hereby grant you a nonexclusive, nontransferable license to use

the object code version of the Software embedded into, provided solely for use with or loaded onto the Product, and the accompanying documentation

("Documentation") for your internal business purposes. The Software and any authorized copies are owned by us or our suppliers, and are protected by law,

including without limitation the copyright laws and treaties of the U.S.A. and other countries. Evaluation versions of the Software may be subject to a time-

limited license key.

3. RESTRICTIONS: You (and your employees and contractors) shall not attempt to reverse engineer, disassemble, modify, translate, create derivative works

of, rent, lease (including use on a timesharing, applications service provider, service bureau or similar basis), loan, distribute, sublicense or otherwise transfer

the System, in whole or part except to the extent otherwise permitted by law. The Software may be operated on a network only if and as permitted by its

Documentation. You may make one (1) back up copy of the object code of the Software for archival purposes only. Evaluation Software will be run in a lab,

nonproductive environment. Results of any benchmark or other performance tests may not be disclosed to any third party without our prior written consent.

Title to and ownership of the Software and Documentation, and all copyright, patent, trade secret, trademark, and other intellectual property rights in the

System, shall remain our or our licensors' property. You shall not remove or alter any copyright or other proprietary rights notice on the System. We reserve

all rights not expressly granted.

4. LIMITED WARRANTY: (a) Limited Warranty. We warrant to you that, commencing on your receipt of a Product and terminating 1 year thereafter, the System

will perform substantially in accordance with its then-current appropriate Documentation. The Product (including replacements) may consist of new, used or

previously-installed components. (b) Remedies. If the System fails to comply with such warranty during such period, as your sole remedy, you must return the

same in compliance with our product return policy, and we shall, at our option, repair or replace the System, provide a workaround, or refund the fees you

paid. Replacement Systems are warranted for the original System's remaining warranty period. (c) Exclusions. EVALUATION SOFTWWARE IS LICENSED ON

AS-IS BASIS AND SUBJECT TO 4(d). We will have no obligation under this limited warranty due to: (i) negligence, misuse or abuse of the System, such as

unusual physical or electrical stress, misuse or accidents; (ii) use of the System other than in accordance with the Documentation; (iii) modifications,

alterations or repairs to the System made by a party other than us or our representative; (iv) the combination, operation or use of the System with equipment,

devices, software or data not supplied by us; (v) any third party hardware or Third Party Software, whether or not provided by us; (vi) any failure other than by

us to comply with handling, operating, environmental, storage or maintenance requirements for the System in the Documentation, including, without

limitation, temperature or humidity ranges. (d) Disclaimers. We are not responsible for your software, firmware, information, or data contained in, stored on, or

integrated with any Product returned to us for repair or replacement. SUCH LIMITED WARRANTY IS IN LIEU OF, AND WE SPECIFICALLY DISCLAIM, ANY

AND ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF

SATISFACTORY QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. WE DO NOT WARRANT THAT THE

SYSTEM WILL MEET YOUR REQUIREMENTS OR BE UNINTERRUPTED OR ERROR-FREE. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN,

OBTAINED FROM US OR ELSEWHERE, WILL CREATE ANY WARRANTY NOT EXPRESSLY STATED IN THIS AGREEMENT. Some jurisdictions do not allow the

exclusion of implied warranties or limitations on how long an implied warranty may last, so such exclusions may not apply to you. In that event, such implied

warranties or limitations are limited to 60 days from the date you purchased the System or the shortest period permitted by applicable law, if longer. This

warranty gives you specific legal rights and you may have other rights which vary from state to state or country to country.

5. LIMITATION OF LIABILITY: WE AND OUR AFFILIATES, SUPPLIERS, LICENSORS, OR SALES CHANNELS ("REPRESENTATIVES") SHALL NOT BE LIABLE TO

YOU FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED TO LOST

REVENUES, PROFITS OR SAVINGS, OR THE COST OF SUBSTITUTE GOODS, HOWEVER CAUSED, UNDER CONTRACT, TORT, BREACH OF WARRANTY,

NEGLIGENCE, OR OTHERWISE, EVEN IF WE WERE ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES. NOTWITHSTANDING ANY OTHER

PROVISIONS OF THIS AGREEMENT, WE AND OUR REPRESENTATIVES' TOTAL LIABILITY TO YOU ARISING FROM OR RELATING TO THIS AGREEMENT

OR THE SYSTEM SHALL BE LIMITED TO THE TOTAL PAYMENTS TO US UNDER THIS AGREEMENT FOR THE SYSTEM. THE FOREGOING LIMITATIONS

SHALL NOT APPLY TO DEATH OR PERSONAL INJURY TO PERSONS OR TANGIBLE PROPERTY IN ANY JURISDICTION WHERE APPLICABLE LAW

PROHIBITS SUCH LIMITATION. YOU ARE SOLELY RESPONSIBLE FOR BACKING UP YOUR DATA AND FILES, AND HEREBY RELEASE US AND OUR

REPRESENTATIVES FROM ANY LIABILITY OR DAMAGES DUE TO THE LOSS OF ANY SUCH DATA OR FILES. SOME JURISDICTIONS DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH EXCLUSIONS MAY NOT APPLY TO YOU.

6. CONFIDENTIALITY: Information in the System and the associated media, as well as the structure, organization and code of the Software, are proprietary to

us and contain valuable trade secrets developed or acquired at great expense to us or our suppliers. You shall not disclose to others or utilize any such

information except as expressly provided herein, except for information (i) lawfully received by the user from a third party which is not subject to

confidentiality obligations; (ii) generally available to the public without breach of this Agreement; (iii) lawfully known to the user prior to its receipt of the

System; or (iv) required by law to be disclosed.

7. SUPPORT: Updates, upgrades, fixes, maintenance or support for the System (an "Upgrade") after the limited warranty period may be available at separate

terms and fees from us. Any Upgrades shall be subject to this Agreement, except for additional or inconsistent terms we specify. Upgrades do not extend the

limited warranty period.

8. TERM; TERMINATION: The term of this Agreement shall continue unless terminated in accordance with this Section. We may terminate this Agreement at

any time upon default by you of the license provisions of this Agreement, or any other material default by you of this Agreement not cured with thirty (30)

days after written notice thereof. You may terminate this Agreement any time by terminating use of the System. Except for the first sentence of Section 2

("License") and for Section 4(a) ("Limited Warranty"), all provisions of this Agreement shall survive termination of this Agreement. Upon any such termination,

you shall certify in writing such termination and non-use to us.

9. EXPORT CONTROL: You agree that the Products and Software will not be shipped, transferred, or exported into any country or used in any manner

prohibited by the United States Export Administration Act or any other export laws, restrictions, or regulations (the "Export Laws"). You will indemnify, defend

and hold us harmless from any and all claims arising therefrom or relating thereto. In addition, if the Products or Software are identified as export controlled

items under the Export Laws, you represent and warrant that you are not a citizen, or otherwise located within, an embargoed nation (including without

limitation Iran, Iraq, Syria, Sudan, Libya, Cuba, North Korea, and Serbia) and that you are not otherwise prohibited under the Export Laws from receiving the

Software. All rights to the Products and Software are granted on condition that such rights are forfeited if you fail to comply with the terms of this Agreement.

10. U.S. GOVERNMENT RIGHTS: The Software and the documentation which accompanies the Software are "Commercial Items," as that term is defined at

48 C.F.R. §2.101, consisting of "Commercial Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R.

§12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48 C.F.R. §12.212 or 48 C.F.R. §§227.7202-1 through 227.7202-4, as applicable, the

Commercial Computer Software and Commercial Computer Software Documentation are being licensed to U.S. Government as end users (a) only as

Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Harmonic, 4300 North

First Street, San Jose, CA 95134 U.S.A.

11. GENERAL: You shall not assign, delegate or sublicense your rights or obligations under this Agreement, by operation of law or otherwise, without our

prior written consent, and any attempt without such consent shall be void. Subject to the preceding sentence, this Agreement binds and benefits permitted

successors and assigns. This Agreement is governed by California law, without regard to its conflicts of law principles. The U.N. Convention on Contracts for

the International Sale of Goods is disclaimed. If any claim arises out of this Agreement, the parties hereby submit to the exclusive jurisdiction and venue of

the federal and state courts located in Santa Clara County, California. In addition to any other rights or remedies, we shall be entitled to injunctive and other

equitable relief, without posting bond or other security, to prevent any material breach of this Agreement. We may change the terms, conditions and pricing

relating to the future licensing of our Systems and other intellectual property rights, including this Agreement, from time to time. No waiver will be implied

from conduct or failure to enforce rights nor effective unless in a writing signed on behalf of the party against whom the waiver is asserted. If any part of this

Agreement is found unenforceable, the remaining parts will be enforced to the maximum extent permitted. There are no third-party beneficiaries to this

Agreement. We are not bound by additional and/or conflicting provisions in any order, acceptance, or other correspondence unless we expressly agree in

writing. This Agreement is the complete and exclusive statement of agreement between the parties as to its subject matter and supersedes all proposals or

prior agreements, verbal or written, advertising, representations or communications concerning the System.

Every reasonable attempt has been made to comply with all licensing requirements for all components used in the system. Any oversight is unintentional and

will be remedied if brought to the attention of Harmonic at [email protected].

Documentation Conventions

This guide may use some special symbols and fonts to call your attention to important information. The following symbols appear throughout this guide:

DANGER: The Danger symbol calls your attention to information that, if ignored, can cause physical harm to

you.

CAUTION: The Caution symbol calls your attention to information that, if ignored, can adversely affect

the performance of your Harmonic product, or that can make a procedure needlessly difficult.

LASER DANGER: The Laser symbol and the Danger alert call your attention to information about the lasers

in this product that, if ignored, can cause physical harm to you.

NOTE: The Note symbol calls your attention to additional information that you will benefit from heeding. It

may be used to call attention to an especially important piece of information you need, or it may provide

additional information that applies in only some carefully delineated circumstances.

IMPORTANT: The Important symbol calls your attention to information that should stand out when you are

reading product details and procedural information.

TIP: The Tip symbol calls your attention to parenthetical information that is not necessary for performing a

given procedure, but which, if followed, might make the procedure or its subsequent steps easier, smoother, or

more efficient.

In addition to these symbols, this guide may use the following text conventions:

NOTE: You require Adobe Reader or Adobe Acrobat version 6.0 or later to open the PDF files. You can

download Adobe Reader free of charge from www.adobe.com.

Convention Explanation

Typed Command Indicates the text that you type in at the keyboard

prompt.

<Ctrl>, <Ctrl>+<Shift> A key or key sequence to press.

Links The italics in blue text to indicate Cross-references, and

hyperlinked cross-references in online documents.

Bold Indicates a button to click, or a menu item to select.

ScreenOutput The text that is displayed on a computer screen.

Emphasis The italics text used for emphasis and document

references.

Table of Contents

Chapter 1: ProStream 9100 Overview........................................................... 8

Platform Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

ProStream 9100 Device Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

ProStream 9100 Physical and Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Control Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

System Requirements of Managing PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Front Panel Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Air Inlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cooling Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Central Processing Card (CPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

IOM Slots and Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

DVB-ASI IOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Quad GbE IOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

8VSB Modulation Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Dual GbE IOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Chapter 2: Installing the ProStream 9100..................................................25

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Installing the Device in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Rack Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chassis Warnings for Rack Mounting and Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Airflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Attaching the Rack Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Mounting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Inserting the IOM Cards and RF Input Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ESD Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Inserting an IOM/RF card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Device Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cabling ProStream 9100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Connecting the Ethernet Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting the ASI Input/Output Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting the GbE Input/Output Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Connecting the Input 8VSB Modulation Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Table of Contents

Grounding Mounted Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connecting the AC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connecting the DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

The Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Local Control Panel Display Messages during Bootup . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Messages when Resetting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Back Panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 3: Operating the ProStream 9100.................................................39

Operating with NMX Digital Service Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Operating in Standalone Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Using the Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Front Panel Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting Network Properties of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Licensing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Chapter 4: Maintenance...............................................................................43

Removing and Replacing the Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Maintaining the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Removing and Replacing the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Fan Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Removing and Replacing the Fan Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Removing and Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Input/Output Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Removing and Replacing an Input/Output Module (IOM) . . . . . . . . . . . . . . . . . . . . . . . . 50

Inserting/Replacing IPC Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Appendix A: Contacting the Technical Assistance Center .........................56

Appendix B: Safety and Regulatory Compliance Information ...................58

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Safety Symbols & Translated Safety, Warning & Caution Instructions (English) . . . . . . . . . 58

Symboles de sécurité et traduits de sécurité, d'avertissement et Attention Instructions

(français) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Sicherheit Symbole und übersetzt Sicherheit, Achtung & Vorsicht Anleitung (Deutsch) . 64

Site Preparation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Product End-of-Life Disassembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Product Disassembly Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Safety Rules (English) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Règles de sécurité (French) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

EU Manufacturer’s Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Table of Contents

Electromagnetic Compatibility Notices – Class A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Product Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Product Regulatory Compliance Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Product Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

EU RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

EU REACH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

China RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Other RoHS and REACH type Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Waste Electrical and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Battery Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

WEEE Take-Back Request Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Compliance with additional country specific environmental, safety, and EMC standards 78

Chapter 1

ProStream 9100 Overview

This chapter gives an overview of the Harmonic ProStream 9100 platform, providing a

description of its features and the various optional components that can be integrated into the

system.

The ProStream 9100 platform is typically delivered with all cards, components, software, and

licenses installed, according to customer specifications.

NOTE: While information about various cards and modules might include installation instructions,

Harmonic strongly recommends that only trained service representatives install the internal cards and

components.

This chapter includes the following sections:

Platform Description

ProStream 9100 Device Features

ProStream 9100 Physical and Power Specifications

Control Modes

Front Panel

Back Panel

Platform Description

Harmonic ProStream 9100 is a highly integrated MPEG/DVB multiplexer, scrambler, descrambler

and transcoder for multimedia services carried over digital broadcast networks.

The ProStream 9100 conforms to the dynamic requirements of various market segments such as

Telco, Cable, DBS and Broadcasters.

ProStream 9100 receives MPEG streams over Gigabit Ethernet (GbE), DVB-ASI, 8VSB inputs. It

multiplexes, scrambles, transcodes and outputs the content over GbE and/or DVB-ASI ports. It

features a modular, high-density chassis that is furnished with up to 5 IOMs (Input/Output Module)

and up to 4 IPCs (Internal Processing Card) in a single, one-rack-unit (1-RU) chassis. The number

of input and output ports changes according to device configuration.

The modularity of the platform allows easy field replacement of cards, as well as field upgrades of

SW and HW features. Device serviceability is enhanced by:

Dual power supply units.

Swappable modules:

ACE modules

IOM modules

Power supply units

Fan tray

Chapter 1 ProStream 9100 Overview

ProStream 9100 Device Features

Fan control for noise reduction

Improved air flow for cooling

ProStream 9100 Device Features

The main features and capabilities of the device are as follows:

Modular platform - Provides a density of up to 5 IOMs (Input Output Module) in a single, one-

rack unit (1-RU) chassis. The modular design allows a flexible and easy field replacement of

cards as well as field upgrades of SW and HW features.

IP IOM - ProStream 9100 receives and transmits data via a GbE port. The GbE card occupies

two IOM slots and is mounted in slot 1 and slot 3. Each device supports a single IP IOM card.

Each IP IOM card has four active GbE ports.

DVB-ASI SCR IOM - ProStream 9100 receives and transmits data via four DVB-ASI ports and

supports a maximum bitrate of 140 Mbps. Each port can be configured as an input or output

port. This card also supports DVB-CSA (Common Scrambling Algorithm).

NOTE: For further details, see DVB-ASI IOM.

8VSB Input card - ProStream 9100 receives ATSC terrestrial TV. It receives four independent

ATSC 8VSB signals on the inputs and outputs MPEG-2 Transport Streams over GbE or ASI

output ports.

Input Extraction capability - The device extracts incoming feeds and displays their structure

and elements on the control interface in a user friendly view.

Full multiplexing capability - Content is routed from any input port to any output port.

Advanced scrambling - ProStream 9100 scrambles the input content in compliance with the

DVB-CSA standard. This feature is available for both GbE and DVB-ASI output ports, in both

NMX and standalone control modes.

Transcoding - ProStream 9100 transcodes any codec to any other codec, video and audio

streams for Broadcast and OTT Mobile/Web video and audio streams.

Chapter 1 ProStream 9100 Overview

ProStream 9100 Physical and Power Specifications

Physical Dimensions

Table 1–1: Physical Dimensions

Dimension Inches Centimeters

Height 1.75 4.45

Width 19 48.36

Total Length (front to back) 27 68.69

Depth (from rack mount fixture to back of device) 25.20 64

Power Supply Specifications

ProStream 9100 is equipped with two field replaceable redundant AC/DC power supply units.

Each power supply unit easily accommodates the power consumption of a fully populated device.

When both power supply units are plugged in and connected to the mains, the power supply

units operate in current sharing mode.

Harmonic sells power supply units that have been thoroughly qualified to operate with the

ProStream 9100 device. Table 1–2 lists power specifications of a fully populated unit together with

the Harmonic part numbers for the qualified power supply modules. Use these part numbers to

order your power supply modules.

For installation details, see Overcurrent Protection.

For cabling details, see Connecting the Power.

Environmental Specifications

The following table lists the environmental specifications for ProStream 9100.

Table 1–2: Power Supply Units Specifications

PS Type Input Voltage Range Input Line

Frequency Comments

AC 100 to 240 VAC 47 to 63 Hz Input voltage range is auto ranging

DC 40 to 60 VDC N/A Nominal input is -48VDC

Table 1–3: Environmental Specifications

Parameter Description

Temperature Operating 0 to 50 °C (32 to 122 °F)

Storage –20 to 80 °C (–4 to 176 °F)

Ventilation Ventilation When fans operate at full speed, air flow through the

device is at least 2.098m³/min (74.1 CFM) per

ProStream 9100 unit

Chapter 1 ProStream 9100 Overview

Control Modes

NOTE: ProStream 9100 is compliant with RoHS Directive 2002/95/EC.

Control Modes

ProStream 9100 supports the following control mode options:

NMX - Harmonic's NMX Digital Service Manager offers comprehensive management of

networks including automatic device redundancy, source switching and automation.

ProStream 9100 is managed as an integral part of a broadcasting system.

Standalone - The device is managed as a standalone device independent of the broadcasting

system. It is controlled by a Web client, an onboard interface accessible through Microsoft

Internet Explorer with comprehensive management capabilities.

System Requirements of Managing PC

System requirements of the managing computer vary according to the control mode as described

in the following table.

Altitude Operation <15,000 feet (4,572 meters)

Storage <40,000 feet (12,192 meters)

Shock and Vibration Packaged Passes the impact, compression, and vibration

requirements of ASTM D4169-94, Distribution Cycle

13, Assurance Level 1

Operating Passes NEBS Office Vibration Test while operating

(0.1G sine sweep, 5 to 100 Hz, 3 axis)

Table 1–4: Control Mode Requirements

Control Mode Requirements

NMX NMX runs on an NMX computer which is a Harmonic approved DellTM

computer

Standalone (SAG3) Pentium 3.x or higher

Windows XP, Windows 7

Internet Explorer 9,10,11

Chrome

Firefox

Opera

Safari

Table 1–3: Environmental Specifications

Parameter Description

Chapter 1 ProStream 9100 Overview

Front Panel

452 3

Table 1-5: ProStream 9100 Front Panel

Item Feature

1Front bezel

2Ethernet service port (for debugging purposes only)

3LEDs

4Control Panel

5Front Panel Latch

NOTE: Cooling fans are mounted on the rear of the front panel. See Cooling Fans.

The following illustration shows a detailed view of the front panel without any optional modules.

Chapter 1 ProStream 9100 Overview

Front Panel

Table 1–6: Front Panel

Item Feature Function

1Ethernet service port Ethernet service connection

2LED - Power (Yellow for

Startup. Green for On.)

Power indicator

3LED - Fault (Red) Fault indicator

4LED - Local (Yellow) Local Control indicator

5LED - TX (Yellow) Transmitting Indicator

6LCD panel Status indicator

7Latch Front panel latch

8Right key Menu right

9ESC key Menu escape

10 ENTER key Menu Select

11 Down key Menu down

12 Left key Menu left

13 Up key Menu up

Front Panel Bezel

ProStream 9100 has a detachable front bezel that snaps on top of the control panel. The air inlets

located on the sides of the bezel provide access to the reusable air filters. To remove the bezel,

see Removing and Replacing the Bezel.

Chapter 1 ProStream 9100 Overview

Back Panel

Control Panel

The control panel consists of an LCD display and a keypad. The control panel enables preliminary

configuration and basic monitoring of ProStream 9100. It is usually used for standalone devices.

For more information, see Front Panel.

Front Panel LEDs

The four LEDs on the front panel indicate the operational status. There is no difference in LED

functionality whether ProStream 9100 is operating in NMX or standalone control mode. For more

information, see Figure .

Air Inlets

The air inlets are designed to provide maximum air flow. The air flow is critical for maintaining the

correct temperature range. Fans in the front unit draw air in through the front inlets. For details on

cleaning and replacing air filters, see Air Filter.

CAUTION: Do not obstruct the airflow when mounting the device on the rack. Severe equipment damage

can result when the device cannot properly exhaust the airflow.

Cooling Fans

The ProStream 9100 platform uses a fan tray unit that contains eight 12V fans that control the

temperature during operation. The fans located in the front of the device use air from the front

and exhaust it to the rear of the device. Each fan has a speed control mechanism and the CPC

manages their speed. The Fan Control mechanism triggers the fans to accelerate according to

real environmental measurements to increase Mean Time Between Failures and to lower the

noise level when working in typical environmental conditions.

All fans are mounted on the back side of the front panel to allow quick and easy field replacement

in case of a fan failure. For more information, see Fan Tray.

Back Panel

The following figure illustrates the back panel of the ProStream 9100 device with an optional

configuration of IOMs. The number and type of mounted IOMs varies according to the needs of

the customer.

Chapter 1 ProStream 9100 Overview

Back Panel

Central Processing Card (CPC)

The Central Processing Card (CPC) is the main card of the ProStream 9100 platform. It includes

the communication interfaces of the device and additional components, as follows:

2 x Ethernet ports - Ethernet ports allow connection to separate networks. The Ethernet ports

are labeled ETH1 and ETH2. The ETH1 port is used to connect the device to the

management network. The ETH 2 port connects to the CAS network, when required.

ETH1and ETH2 are 10/100/1000 Base-T ports. For cabling instructions, see Connecting the

Ethernet Cables.

EIA-RS-232 Serial Communication Port - The EIA-RS-232 serial port is used for technical

support only.

Fault Relay Port - Currently not in use.

Table 1-7: Back Panel

Item Feature Function

1 AC/DC power Power

2 Optional slots I/O module slots

3 Gigabit Ethernet ports—management Network Management

4 Optional SDI ports Not in use

5 LEDs Fault (red) and locater (green) LEDs

6 Fuse Fuse protection

7 Serial port Serial data input

8 Fault relay port Contact closure fault indication

Chapter 1 ProStream 9100 Overview

Back Panel

CPC LEDs - The following table lists CPC LEDs from top to bottom and describes their

functionality. There is no difference in LED functionality whether ProStream 9100 is operating

in NMX or standalone control mode. See also Figure .

Table 1–8: CPC LEDs

LED Color Description

Fault Red Same as front panel. An alarm has been issued. For

further details, refer to Troubleshooting on page 30

Locater Blue Identify unit, indicates the device when it needs service

Power Supply

The ProStream 9100 device is equipped with two field-replaceable redundant AC or DC power

supply units. Each power supply unit accommodates the power consumption of a fully populated

device. When both power supply units are plugged in and connected to the mains, the power

supply units operate in current sharing mode. For power consumption specifications, see Power

Supply Specifications.

The physical dimensions of the AC/DC power supply unit are 40mmH x 90mmW x 440mmD.

Each power supply unit features two LEDs. The following table describes the LEDs.

For instructions on connecting the AC power supply, see Connecting the Power.

The -48 VDC power supply unit is supplied with the required 3-pin male connector. See

Connecting the DC Power Supply for instructions on connecting the power supply.

NOTE: Consideration should be given to the connection of the equipment to the supply circuit and the

effect that overloading circuits might have on overcurrent protection and supply wiring. Use appropriate

equipment nameplate ratings when addressing this concern.

IOM Slots and Cards

The ProStream 9100 device back panel has five Input Output Module (IOM) slots labeled one to

five. Each slot accommodates a single IOM card. The following figure illustrates the arrangement

of the slots in the back panel.

Table 1–9: Power Supply LEDs

LED Color Description

In OK Green Illuminates when mains input voltage is present.

Out OK Green Illuminates when output voltage is greater than 80% of the

nominal output rate.

Chapter 1 ProStream 9100 Overview

Back Panel

Figure 1–1: ProStream 9100 Slot Arrangement

ProStream 9100 supports the following IOMs:

DVB-ASI SCR-IOM - PRM-9K-ASI-SCR-0001(see DVB-ASI IOM)

Quad GbE IOM - PRM-9K-IOM-GBE-4G (see Quad GbE IOM)

8VSB Modulation - PRM-9K-IOM-8VSB (see 8VSB Modulation Card)

Dual GbE IOM - PRM-9K-IOM-GBE-0002 (see Dual GbE IOM)

DVB-ASI IOM

NOTE: The following information applies to both types of the DVB-ASI card.

Each DVB-ASI IOM card has four independent ports labeled ASI 1 to ASI 4. Each port can be

configured as an input or output port. The following table lists ASI card specifications.

Table 1–10: ASI Card Specifications

Feature Description

Number of Ports Four.

Connector ASI.

Max. input bitrate Up to 156 Mbps per port.

Input extraction 4 x ASI ports. Each port can be configured as an input or an

output port.

In the DVB-ASI-SCR card, port 2 can be configured to receive the

GPS frequency.

Max. output bitrate Female BNC connector.

Multicast content Content elements can be simultaneously routed to multiple output

ports.

Chapter 1 ProStream 9100 Overview

Back Panel

ASI Port LEDs

Each ASI port features two LEDs: Tx and Rx. The following tables describe the available status of

each LED.

Quad GbE IOM

The Quad GbE IOM card has six independent ports. The ports are organized as follows:

GbE 1-4 - Maximum bitrate is 1 Gbps. The ports are labeled GbE1to GbE4. These ports

support fiber or copper cables and use SFP transceivers.

10GbE1-2 - Maximum bitrate is 10 Gbps. The ports are labeled 10GbE1to10GbE2. These

ports support fiber cables only and use SFP+ transceivers.

Table 1–11: Status of ASI Port Rx LEDs

Color Description

Off Port is disabled

Red Port is enabled and there is no ASI input flow

Amber Port is enabled and invalid MPEG data is detected

Green Port is enabled and nulls only are detected in the flow

Blinking green Port is enabled and traffic is flowing

Table 1–12: Status of ASI Port Tx LEDs

Color Description

Off Port is disabled

Red Port is enabled and overflow is detected in output port

Green Port is enabled and nulls only are detected in the flow

Blinking green Port is enables and traffic is flowing

Chapter 1 ProStream 9100 Overview

Back Panel

Each port is bi-directional and can receive and transmit streams simultaneously. The following

table lists the Quad GbE card specifications.

Table 1–13: Quad GbE Card Specifications

Feature Description

Number of Ports Six. Up to four ports can be active simultaneously (two remain idle)

4xGbE 1 Gbps

1xGbE 10 Gbps and 2xGbE 1 Gbps with copper cables

Note: Only one 10 Gbps ports can be used.

Connector 1 SFP+ transceiver for fiber cable only

2 SFP transceiver for either fiber of copper cables

2 RJ-45 connectors for copper cables only

Max. bitrate per port 

(on 1G port only)

Input - Up to 950 Mbps

Output - Up to 915 Mbps

Max. bitrate per port 

(on 10G port only)

Input - Up to 1.8 Gbps

Output - Up to 1.8 Gbps

Max. bitrate per port 

(on 1G and 10G ports)

Input - Up to 1.4 Gbps on the 10G port and up to 950 Mbps on the

1G ports

Output - Up to 1.4 Gbps on the 10G port and up to 915 Mbps on

the 1G ports

Max. bitrate per card

(card using 1G port

only)

Input - Up to 3.8 Gbps

Output - Up to 2.2 Gbps

Throughput - 2.2 Gbps

Max. bitrate per card

(card using 10G port

only)

Input - Up to 1.8 Gbps

Output - Up to 1.8 Gbps

Throughput - 1.8 Gbps

Max. bitrate per card

(card using 1G and 10G

ports)

Input - Up to 3.3 Gbps

Output - Up to 2.2 Gbps

Throughput 2.2 Gbps

Number of input

sockets

Up to 400 sockets SPTS or MPTS

Number of output

sockets

Up to 400 sockets SPTS or MPTS

Input De-jittering

capability

Up to 50 msc point-to-point

Multicast content Content elements are simultaneously routed to multiple output

ports

Null Packet Insertion Constant bitrate output stream with null packet insertion and PCR

correction

IP UDP modes The following IP UDP modes are supported in both input and

output streams:

IP UDP unicast

IP UDP multicast (IGMP V2 or V3)

Chapter 1 ProStream 9100 Overview

Back Panel

Quad GbE Port LEDs

Each GbE port features two LEDs: Tx and Rx. The following table describes the available status of

each LED.

Table 1–14: Status of GbE Port LEDs

LED Status Color Description

Activity Green On - Live fiber is connected to the port and a network link

is detected

Blinking - Real traffic flows through the link

Alarm Red On - Indicates an error in the GbE port

SFP Module

The SFP (Small Form Factor Pluggable) module converts optical data into electrical data and vice

versa. The SFP modules receive input signals over a variety of physical interfaces:

SFP

Single-mode optical interface (1000 Base-LX)

Multi-mode optical interface (1000 Base-SX)

Copper interface (1000 Base-T)

SFP + (relevant only to the Quad GbE IOM)

Multi-mode optical interface (1000 Base-SX 1G Ethernet, 10GBase-SR/SW 10G Ethernet)

The following figure illustrates an SFP module:

Figure 1–2: SFP Modules

Warning: Class I laser product. (IEC/EN 60825-1; 21CFR SubChapter J (1040.10 and 1040.11)

Max. number of input

services

500 per device

Max. number of output

services

500 per device

Table 1–13: Quad GbE Card Specifications

continued

Feature Description

SFP copper

SFP fiber

1Giga SFP 10Giga SFP+

La page charge ...

Harmonic ProStream 9000 17.6 Guide d'installation

Marque: Harmonic

Modèle: ProStream 9000 17.6

Taper: Guide d'installation

Télécharger le PDF

rapport

dans d''autres langues

English: Harmonic ProStream 9000 17.6 Installation guide

Harmonic ProStream 9000 17.6 Guide d'installation

Harmonic ProStream 9000 17.6 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents