Powerplay PJR1500 Mode d'emploi

Marque: Powerplay

Modèle: PJR1500

Catégorie: Nettoyeurs haute pression

Taper: Mode d'emploi

Instruction Manual

Model PJR1500/

Model PJR1500C

OFF/O

ON/I

www.powerplaypro.com

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

WARNING: To reduce the risk of injury, the user must read and understand the instructions

before using this product.

Customer Help Line

1-855-770-7529

PJR1500-93025-KR

en 2

OFF/O

ON/I

Package content:

1. Power washer unit

2. Manual

3. Nozzle cleaning wire (may be taped

to the manual)

4. Handle

5. Screws (2)

6. Spray gun holder

7. Cord hook

8. Spray gun (8A shows trigger lock

button)

9. Lance Extension

10. Vari-Spray nozzle

11. High pressure hose

12. Detergent bottle

13. Power washer quick connect

(QC) lter (clear) (Connect to

Power Washer Unit)

14. Garden hose adapter (GHA)

(Connect to Garden Hose)

Quick Start Guide

2. Slide Gun holder on

side.

3. Slide cord hook on

side.

6. Release high pressure

hose from gun.

7. Press switch up to unlock and down to lock spray

gun. NOTE: The trigger lock prevents the trigger

from being engaged accidentally.

4. Screw on high pressure

hose to power washer

5. Push to attach high

pressure hose to gun.

OFF/O

ON/I

OFF/O

ON/I

Unlock Lock

1. Screw handle to main

unit.

3 en

QC - Clear

Adapter

Garden Hose

Adapter (GHA)

(GHA)

OFF/0

ON/I

OFF/0

ON/I

8. Connect extension to gun rst by pushing

together and turning clockwise simultaneously. Twist

collar clockwise to lock in place. Connect lances or

detergent bottle by pushing together and twisting.

To remove push together and turn counter clockwise.

10. Adjust vari-spray nozzle

by turning the head clockwise

or counterclockwise to

change it from a ne point

spray to a wide fan spray.

9. When using the

detergent bottle ll

it with a properly

formulated deter-

gent or cleaner

with a water ratio

according to instruc-

tions on the contain-

er. The detergent

bottles comes with

a straw which is

attached onto the

screw-on top. If

you do not see the

straw, look inside

the bottle and attach

it to the screw-on

top.

13. GHA attaches to QC

Clear lter.

12. Attach GHA to the

end of the garden hose.

14. Snap the GHA onto

the QC adapter. To

remove pull back on the

collar and pull o.

16. Turn on Water 17. Switch ON and OFF

positions.

15. Plug machine into a

grounded outlet, push

reset button. (US units

only)

18. Press safety button to

unlock trigger gun and

squeeze trigger to turn on.

Make sure spray gun is in

locked position when not

in use.

Unlock Lock

11. Clear QC filter attaches to

the power washer.

en 4

SPecificationS

Model Max PSI

(lbs/sq/in)

Max GPM

(gal/per/min)

Max Temp Volts Amps Weight (lbs)

PJR1500/

PJR1500C 1,500 1.4 122° F 120 12 15

Limited Warranty

This product is under warranty to the original retail consumer against defects in material and

workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including

the spray gun, the high pressure hose and all accessories from the date of purchase. The

warranty is not transferable or assignable. This warranty covers replacement parts. This limited

one year warranty applies only to products used in consumer applications and is void in rental

or any commercial application. Reasonable care must be used in conformity with operation and

maintenance instructions in the owner’s manual and quick start guide. Failure to follow these

instructions will void this warranty.

Warranty ProceSS

Keep your original receipt of purchase in case of warranty claim.

If your power washer develops a problem, contact Customer Service by one of the two methods:

1. Send an e-mail to [email protected] with your name, address the model of your power

washer, when and where you purchased it. Describe in the e-mail the problem you are having. A

Customer Service person will contact you to resolve the problem.

2. Call our toll-free number at 1-855-770-7529. Customer Service is available Monday - Friday 8:00

a.m. to 5:00 p.m. Central Standard Time (CST). The Customer Service person will work with you

to x the problem.

If the power washer needs to be returned for repair, shipping costs to the company must be paid by

the customer. A Return Merchandise Authorization (RMA) Number will be issued for the return.

Upon receiving the power washer, the company will repair or replace the unit. We will send unit back

to customer at no charge.

Please note: Power washers sent to the company without an RMA Number will NOT be accepted

and shipped back at the expense of the sender.

tabLe of contentS

Quick Start ....................................................... 2

Specications .................................................. 4

Limited Warranty ............................................. 4

Warranty Process ............................................ 4

Introduction ...................................................... 5

Safeguard, Warnings & Safety Tips ................. 5

Package Content ............................................. 7

Unpacking & Assembly .................................... 8

Operating Instructions ................................... 13

How to Clean ................................................. 14

Operating Tips and Maintenance................... 15

Storage .......................................................... 16

Pump Saver ................................................... 17

Replacement Parts ........................................ 18

Troubleshooting and FAQ .............................. 19

5 en

introduction

Congratulations on the purchase of your POWERPLAYTM POWER WASHER!

Your POWERPLAYTM POWER WASHER is a power tool in every sense of the word that may be

used outside your house and in. It is one of the nest most powerful home-use power washers in the

marketplace today.

Please familiarize yourself with the following assembly, operating and safety information. Read this

manual before using the power washer. Failure to follow these instructions could cause personal

injury, property damage, or both. Save this manual for other users to read prior to using the power

washer.

If you have any questions about or problems with your power washer please call our toll-free number

1- 855-770-7529 and talk with our Customer Service Support Team at Powerplay Pro. We are

available to talk with you Monday through Friday from 8 a.m. to 5 p.m. Central Standard Time (CST).

We can help you with questions regarding operation, warranty, replacement or optional parts, or

For more information on the POWERPLAYTM POWER WASHERS go to www.powerplaypro.com.

Power washers, parts, and accessories can be ordered online 24 hours a day, 7 days a week for your

convenience.

SafeGuardS, WarninGS and Safety tipS

• To avoid personal injury and/or damage

to property and to maximize your power

washing experience, carefully follow all of

the safety tips, instructions, warnings and

safeguards and become familiar with all of

the controls. Be sure you know how to quickly

bleed off the pressure from all parts of your

power washer, and how to turn off the power

washer .

• This power washer conforms to CSA and

other safety and consumer standards. Do

not modify or rebuild any part of your power

washer.

• Do not use your power washer when you are

under the inuence of alcohol or drugs. Use

this power tool carefully and only when you

are alert .

• Watch your balance and footing while using

your power washer. Surfaces become

slippery when wet and are extra slippery when

using a detergent or cleaner.

• Never operate the power washer in bare feet,

sandals, or open-toed shoes.

• When using the power washer near children

make sure they are closely supervised by an

adult to avoid injury. Never let a child use the

power washer.

•Keep ngers, hands, feet and any part

of your body clear of the stream of high

pressure water. The powerful spray can cause

blindness or blast holes in the skin. It can

break a window if you are too close when you

pull the trigger on the spray gun .

• Always wear eye protection to prevent injury

to eyes when operating the power washer.

• To avoid mishaps or injury, always use the

trigger safety lock when not using the power

washer even if the spraying stops for a

moment.

• The power washer is equipped with a Ground

Fault Circuit Interrupter (GFCI) which greatly

reduces the chance of electric shock while the

unit is in use.

• Point the spray gun in a safe direction when

beginning a power washing session.

•When rst using the spray gun, hold the spray

gun and lance with two hands when pulling

the trigger until you get used to the “kick

back” from the spray gun (one hand to pull

the trigger and the other to stabilize the gun

assembly).

en 6

• When you press the power switch to turn off

the power washer, water pressure may remain

in the system. To discharge the pressure,

point the spray gun in a safe direction and

pull the trigger.

•Never spray ammable liquids.

• Never use the power washer in areas that

contain combustible dust, liquids or vapors.

• Avoid contact of the pressure hose with sharp

objects and examine the hose regularly.

Replace if damaged. Due to the high pressure

involved, it cannot be repaired if cut of

damaged.

•Only use detergent specically formulated

for power washers and follow instructions

on the detergent’s label. We have a selection

of power washer detergents to choose from.

Go to www.powerplaypro.com for more

information and to order the detergents.

Power washer detergents are also available

at your local hardware store.

• Protect eyes, lungs, and skin from exposure

to detergent. Dish or laundry soap is too thick

and will clog the nozzle of your detergent

bottle.

• IMPORTANT: Store the power washer

indoors to prevent the water in the unit

from expanding under freezing conditions.

When the water freezes and expands, your

power washer will be damaged and become

inoperable. Or, if storing outdoors, it is

recommended you use Pump Saver. Pump

Saver can be purchased on our website:

www.powerplaypro.com. See details in the

Pump Saver section of this manual.

• Never use hot water with your power washer.

It will overheat and damage the high pressure

pump.

• Never leave the power washer unattended

while it is powered “on”.

• Always turn the water supply “on ” before

turning the power washer power to “on”.

Running the pump dry will cause damage to

the internal components.

• Never use a water supply to your power

washer that exceeds 150 psi maximum.

• Never disconnect the high pressure hose

from the power washer while the system is

pressurized.

• Never permanently engage the trigger

mechanisms on the spray gun.

• Never operate the power washer unless

all components are properly and securely

connected.

• Never allow the power washer pump to run

for more than one minute, after you have

turned off the water supply. This can cause

the motor and pump to overheat and fail.

• Never use lances or other parts that have not

been supplied with your power washer.

• Never use an extension power cord since it

defeats the effectiveness of the GFCI and

increases the chance of electrocuting the

operator.

• Never spray any electrical outlet with your

power washer.

• Inspect the power cord before using. Do not

use it if it is damaged.

Servicing of a Double-Insulated Appliance

In a double-insulated product, two systems of

insulation are provided instead of grounding.

Grounding means are not provided for a double-

insulated product, nor should grounding means

be added to the product.

Servicing a double-insulated product requires

extreme care and knowledge of the system,

and should only be done by qualied service

personnel.

Replacement parts for a double-insulated

product must be identical to the original parts.

A double-insulated product is marked with the

words “Double Insulation” or “Double Insulated”.

Product may also be marked with symbol shown

here. (US unit only)

Double Insulated Product

7 en

Package content:

1. Power washer unit

2. Manual

3. Nozzle cleaning wire (may be taped to the manual)

4. Handle

5. Screws (2)

6. Spray gun holder

7. Cord hook

8. Spray gun (8A shows trigger lock button)

9. Lance Extension

10. Vari-Spray nozzle

11. High pressure hose

12. Detergent bottle

13. Power washer quick connect (QC) lter (clear) (Connect to Power

Washer Unit)

14. Garden hose adapter (GHA) (Connect to Garden Hose)

OFF/O

ON/I

Note - tool(s) required

for assembly

Philip Screwdriver:

OFF/O

ON/I

en 8

UnPacking & aSSembLy

• After unpacking the POWERPLAYTM POWER WASHER, lay out parts and accessories.

Familiarize yourself with the parts in the package by comparing them to those listed on the

“PACKAGE CONTENTS” page.

• The POWERPLAYTMy POWER WASHER requires some minor assembly. You’ll need a Phillips

screwdriver to install the handle to the main unit.

NOTE: Some parts may or may not be already assembled.

• Install the handle to the POWERPLAYTM POWER WASHER (Fig. 1). Place the screws in the

holes provided on the POWERPLAYTM POWER WASHER and handle, screw them together. Do

not use a power screwdriver. When the screw is completely tight, give a small nal clockwise twist

of the screwdriver. Do not over tighten.

• Slide the spray gun holder onto the left side of the washer when facing it. This does not require

any screws. (Fig. 2)

• Slide cord hook holder onto the right side of the washer when facing it. This does not require any

screws. (Fig. 3)

Fig. 1

OFF/O

ON/I

Fig. 3

Fig. 2

OFF/O

ON/I

9 en

High Pressure Hose

• Screw the high pressure hose (clockwise) on the front of the unit at the bottom (Fig. 4). Pull back

the collar and insert o-ring post into the water outlet far enough so the collar can thread onto the

outlet threads until hand tight. Do not use pliers or vice grips to tighten. If it takes fewer than six or

so turns you have not properly tightened the high pressure hose tting. It is easier to position the

power washer in front of you so to ensure that the threads are started correctly. Failure to properly

tighten the high pressure hose will result in the hose slipping or popping off immediately upon

turning the unit on. Do not worry about damage if this occurs - just reinstall and take extra care at

screwing on the high pressure hose tting.

• Connect the other end of the high pressure hose to the spray gun by inserting the silver metal tip

of the high pressure hose into the tting just ahead of the trigger guard. It will lock into the spray

gun with a “click” (Fig. 5). Conrm the hose is locked into the spray gun by pulling slightly on the

hose. The hose is now securely attached to the spray gun.

• To release the hose from the spray gun, press the button on the underside of the gun toward the

trigger guard. The hose will slide out from the connection (Fig. 6).

Fig. 4

Fig. 5 Fig.6

en 10

Spray Gun

• To lock the trigger of the spray gun aim the gun away from you and press the lock button forward

to the front of the gun, (Fig. 7), after doing so, squeeze or pull the trigger to make sure it is locked

and will not move. Always leave lock button in lock position when not in use. This ensures the gun

is in “safe” mode until it is ready for use. Press the lock button back to unlock.

NOTE: The trigger lock prevents the trigger from being accidentally engaged.

Lance

• While the spray gun is in the locked position. Attach the extension lance directly to the spray gun,

insert extension into the gun pushing together turning clockwise simultaneously, turn the extension

collar clockwise to lock into place. To remove turn extension collar counter clockwise to unlock

then push together and turn counter clockwise. The extension lance must be inserted in the

gun rst before using any of the other attachments, and to place in gun holder for storage. It is

recommended that once extension is connected to leave it in place. (Fig. 8)

• Insert the adjustable spray nozzle lance or detergent bottle into the end of the extension lance by

inserting and pushing together turning clockwise simultaneously. To remove push together and

turn counter clockwise.

Remember to always push the safety lock button to lock the trigger when changing lances, to

ensure that they do not accidentally eject with force during removal.

Fig. 8

Unlock Lock

Fig. 7

11 en

Always test a small area to avoid chance of damaging the surface. (Fig. 9)

• When using the adjustable spray lance, the spray pattern and intensity can be controlled

according to power of water needed for each task by twisting the spray nozzle at the far end of the

lance. (Fig. 10).

Detergent Bottle

•When using the detergent bottle, ll it with a properly formulated detergent or cleaner with a water

ratio according to instructions on the container (Fig. 11). The detergent bottles comes with a

straw which is lled into the screw-on top. If you do not see the straw, look inside the bottle and

attach it to the screw-on top. (Fig. 12)

NOTE: The ratio of water to detergent is 10:1 or 10 parts water to 1 part detergent.

• Pressure washer detergents are recommended. See page 15 for more information.

• Thick or gel like detergents will clog the power washer and can cause damage.

Fig. 10

Fig. 11 Fig. 12

Fig. 9

en 12

Garden Hose Adapter

•Install the garden hose adapter (GHA) and quick connect lter. It is made up of two separate

pieces. (1) A clear plastic adapter with a screen lter (about 3 inches long) (Fig. 13) and (2) a blue/

black collar attachment (Fig. 14).

• Attach the garden hose adapter to the end of the garden hose (Fig. 15).

• First, remove the plastic shipping cover on the water inlet on the front of the power washer on the

right side. Hand tight is ne. Slide the blue/black collar onto the clear adapter (Fig. 16), it will

“click” into place.

• The water is now connected to your power washer. Turn on water.

• To remove the water hose, simply pull back on the blue collar and it will slide off the clear adapter.

Note: this can be done at any time. Water will not come out of the garden hose as the blue/

black collar has a water stop check valve. Water will only ow from the garden hose when it is

connected to the clear adapter.

• You have now completed the assembly of your POWERPLAYTM POWER WASHER and are now

ready to begin using your electric power washer. Read and observe all safety instructions.

Fig. 16

QC - Clear

Adapter

Garden Hose

Adapter (GHA)

Fig. 15

(GHA)

Fig. 14Fig. 13

13 en

Fig. 18

OFF/0

ON/I

OFF/0

ON/I

oPerating inStrUctionS

*!Turn on the water supply at the faucet.!* (Fig. 17)

Powering Up

• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international

symbols for ‘on’ and ‘off’: On (|) Off (O), (Fig. 18 ).

• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the

‘reset’ button on the GFCI box (Fig. 19). The indicator window should show a red color. This must

be done each time the unit is plugged in. (US units only)

Fig. 19

Fig. 17

en 14

• Release the safety lock button on the spray gun by pressing the safety lock button from right to

left (Fig. 20). While pointing the spray gun in a safe direction, squeeze the trigger on the spray

gun until there is a steady stream of water, letting the water and air out of the hose.

• Turn the power switch to the ‘ON’ (|) position. The unit will turn on for 1 - 2 seconds and shut off,

this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin

pressure washing.

• Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from

turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to

avoid such symptoms.

HoW to cLean

Cleaning nozzles

•A clogged or partially clogged nozzle can cause signicant reduction of water pressure coming out

of the nozzle and/or cause the unit to pulsate while spraying.

• Turn off the unit

• Turn off the water supply to the unit

• Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times, and then lock the

spray gun by pushing the lock button from left to right.

• The screen inside the clear adapter should be cleaned periodically. Insert a pen or pencil in small

hole at the end of the adapter. The screen lter will slide out (Fig. 21). Rinse it with clean water,

and then place it back in the adapter.

Fig. 21

Fig. 20

Unlock Lock

15 en

• Take off the adjustable lance. Rotate the nozzle on the adjustable lance to the narrow stream

settling which opens up the fan blades. (Fig. 22).

• Using the nozzle tip cleaner provided (or an unfolded paper clip), insert the wire into the nozzle

hole and move back and forth until debris is dislodged (Fig. 23). Back /ush water through the

nozzle using garden hose and highest pressure available (either standard water nozzle or use

your thumb over the nozzle to create water pressure for back ush).

oPerating tiPS and maintenance

• If you hear the motor run intermittently when the trigger is not being squeezed, that is normal. The

pump is priming itself so it is ready to operate when the trigger is squeezed. Turn off the power

washer if not being used after ve minutes.

• The o-rings on the bayonet end of the adjustable lance should be cleaned regularly and lubricated

with non-water soluble grease such as petroleum jelly.

• Keep the nozzle cleaning wire, Which is taped to this manual for use in unclogging the lance

nozzle. If you lose the cleaning wire an straightened paper clip works ne.

How to Avoid Damaging Surfaces

• Damage to surfaces being cleaned occurs because the impact force of the water pressure

exceeds the durability of the surface. Bare wood can be penetrated; paint can be peeled off, etc.

You can vary the force of your power washer by controlling:

a. the angle of the surface being cleaned

b. the distance of the nozzle from the surface being cleaned

• Never use a narrow high pressure stream of water or the turbo lance on soft surfaces susceptible

to damage.

• Use the vari-spray lance when cleaning windows. Be sure to adjust the nozzle to low spray and

place the nozzle approximately four to ve feet away from the window with the nozzle at forty ve

degree angle. Squeeze the trigger and vary the spray pattern and angle until optimum cleaning

efciency is achieved.

Fig. 23

Fig. 22

en 16

Detergent / Storage

• Use detergents designed for power washers. We offer four (4) power washer detergents,

Auto, Motorcycle, Boat and Universal. These can be purchased online at our website www.

powerplaypro.com. Hardware stores or home centers also have power washer detergents for

different cleaning projects. The cleaning solution should be the consistency of water in order to

prevent clogging your detergent bottle and nozzle.

• The cleaning power of the detergents is enhanced when applied with low pressure; and

time is allowed to break down the dirt and grime. The combination of low pressure and

chemical action is very effective and can be better than scrubbing if applied properly.

Always spray detergent on a dry surface, do not pre-soak area. Wetting the surface rst

dilutes the detergent and reduces its cleaning ability. Do not allow detergent to dry on

surface. On vertical surfaces being cleaned, apply detergent to lower surfaces and work

your way up to prevent detergent from causing streaks in the dirt and grime. Rinse

detergent by pressure washing from bottom up for same reason.

• If a stain is particularly tough, it may be necessary to reapply the detergent and use a bristled

brush to scrub the stain. Subsequent power washing after brushing should successfully complete

your cleaning job.

Storage

• Remove lance from the gun and place in the accessory holder. Place the gun in the accessory

holder one the side. Lances are placed into any of the slots in the back of the unit. Make sure

to discard any remaining detergent from the bottle. Flush the bottle and nozzle head with fresh

water to prevent clogging.

• When your pressure washing session has been completed, turn off the power switch located on

the front of the power washer. Unplug the power cord from the outlet. Turn off the water supply.

Pull the trigger on the spray gun 2-3 times to drain out the excess water and to release any

remaining water pressure. Disconnect the garden hose adapter from the water inlet. Do not allow

the power washer to run with no water owing through it.

• Remove detergent bottle and clean completely. Residual chemical will stick to the container and

can cause the detergent injector to clog and not function properly.

• Remove high pressure hose from spray gun and unscrew the other end of the high pressure hose

from the power washer.

• Hook the power cord around the L-shaped tab on the right side of the machine when facing it.

• The pressure hose is stored on the hose hook located on the back of the handle.

• DO NOT store the power washer where it is exposed to freezing temperatures unless

you use Pump Saver. It is recommended that you use Pump Saver for storing in freezing

temperatures. Freezing will damage the pump unless Pump Saver is added to the power washer.

If not using or if storing your power washer for more than one month, run Pump Saver through it.

See the section on Pump Saver for more information.

17 en

PUmP Saver

Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal

parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also

assists with protection from internal corrosion.

Pump Saver Instructions

Follow the previous storage instructions for your power washer. To prevent staining, protect the

surface under the power washer from any excess uid. Wear eye protection when using this product.

1. Turn off your power washer.

2. Disconnect garden hose.

3. Shake the bottle well before connecting to the power washer.

4. Screw the garden hose adapter to the Pump Saver Bottle.

5. Click onto pump inlet (clear quick connect lter).

6. Turn the valve on the bottle to the open position.

7. Turn the power washer on. Turn the power washer off as soon as the Pump Saver uid begins

to exit the water outlet - nozzle.

8. Turn the valve on the bottle to the off position and remove the Pump Saver bottle valve

assembly from the power washer.

en 18

rePLacement PartS

Pos. Description Part Number Qty.

1 Detergent Bottle PW50954 1

2 Hose (QC) 20’ PW4220600 1

3 Spray Gun PW4120392 1

4 Vari-Spray Lance/Nozzle PW4120410 1

5 Extension Lance PW4120400 1

6 Gun Holder PW4220580 1

7 Cord Hook PW4220590 1

8 Wheel PW4220541 2

9 Wheel Cover PW4220551 2

10 Quick Connect Filter (clear plastic) PW3082130 1

11 Garden Hose Adapter PW3082731 1

12 GFCI Assembly (US unit only) PW3084330 1

Pump Spare Part Kits

Water Seals & Valves PW4220620 1

Pre-Assembly TSS PW4220630 1

O-Ring Kit PW909107K 1

19 en

troUbLeSHooting and faQS

Unit will not turn on. Make sure the power washer is in the “OFF” position. Plug in the

electrical cord to a grounded 120 volt outlet (no electrical extension

cord should be used). If the electrical cord will not plug into your

outlet, your electrical outlet is not properly grounded and should not be

used. Use another electrical outlet. Press the reset button on GFCI

power box. If the color of red is not visible in the little window on the

GFCI, unplug and plug in again. Press reset, and look for the red color

in the window, this should remain red in color. If the color is staying

red, turn the power switch on the power washer to “ON”. Squeeze the

trigger on the spray gun and try again.

If this did not correct the problem, try plugging into another electrical

outlet and repeat the above procedure. If it is still not working, call

Customer Service at 1-855-770-7529.

The high pressure (HP)

hose will not connect /

stay connected to the

spray gun. Is this a

spray gun problem?

In most cases, the spray gun is not the problem. The problem is the

rubber sleeve covering the tting at the end of the high pressure hose.

It has likely slipped up toward the metal tip. The x: wiggle, twist and/

or pull the rubber sleeve down until the entire tip is visible plus an 1/8”

of the metal tting below the tip. Now try to insert the hose tip into the

spray gun. It should “click” into place and will not come out until the

hose is released by pushing in the lever on the underside of the gun.

You may cut away the end of the sleeve with a sharp knife if unable to

move the sleeve down. Be careful not to cut or puncture the hose.

The unit is running but

there is not water ow.

Check the water source. Unclog the nozzle on the lance. (See nozzle

cleaning instructions under “Cleaning nozzles”.) Or take off the lance

and just spray out of the spray gun. This will indicate if the problem is

with the lance.

Why is water leaking

where the high pressure

hose connects to the

spray gun?

Make sure there is an o-ring at the end of the metal tip of the high

pressure hose. If no o-ring is present, the connection between the

hose and spray gun will leak. O-Ring Kits are available online at www.

powerplaypro.com or call Customer Service at 1-855-770-7529 to

place an order.

I can’t remove the lance

from the spray gun.

What should I do?

All lances and the detergent bottle are attached and removed from the

spray gun in the same manner. Insert the quick-release end of the

lance/detergent bottle into the spray gun. Press the spray gun and

lance together (about a 1/8”) and turn clockwise. The lance will lock

in place. Remove the lance by reversing this procedure. Press the

spray gun and lance together and turn counter clockwise. The lance

will slide out. Or, hold the spray gun and lance in an upright position

with the nozzle end on the oor. Push the whole assembly straight

down to loosen the connection, and then follow the removal process

again. You may also spray soapy water or a lubricant in the area

where the lance connects to the spray gun.

The power washer turns

on for 2 seconds, shuts

off, and will not turn

back on. Do I have a

defective unit?

It sounds like your power washer is working just ne. When the water

is connected, the accessories are assembled properly, and the power

switch is turned on, the power washer may turn on for 1 - 2 seconds to

prime the pump. It automatically shuts off and waits for the spray gun

trigger to be pressed. When the trigger is pressed, water starts owing

through the pump. The water sensor in the pump “senses” the moving

water and automatically turns the power washer on. Or, turn the power

switch to off, hold in the trigger on the spray gun, so that you have a

steady stream of water. While you are holding the trigger open on the

spray gun, at the same time, turn the power switch on.

www.powerplaypro.com

Model PJR1500/

Model PJR1500C

OFF/O

ON/I

Customer Help Line

1-855-770-7529

Cleaning and troubleshooting tips, manuals and other helpful information are available on our

website. For parts and accessories for your POWERPLAYTM Washer, visit www.powerplaypro.com.

Ordering is easy and all major credit cards are accepted.

PowerPlay

117 Ave Gun

Pointe-Clare, QC H9R 3X3

Canada

Phone: 1-855-770-7529

Email: [email protected]

Website: www.powerplaypro.com

La page charge ...

Powerplay PJR1500 Mode d'emploi

Marque: Powerplay

Modèle: PJR1500

Catégorie: Nettoyeurs haute pression

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Powerplay PJR1500 User guide
español: Powerplay PJR1500 Guía del usuario

Documents connexes

Powerplay PJR2000P Mode d'emploi

Powerplay PJR1500 Mode d'emploi

Powerplay PJR1500 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents