AEG BE6915001M Manuel utilisateur

BE6915001M

EN User Manual 2

FR Noticie d’utilisation 26

BS099

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 1

2 www.aeg.com

CONTENTS

1. SAFETY INFORMATION ................................................................................................ 3

2. SAFETY INSTRUCTIONS................................................................................................ 4

3. PRODUCT DESCRIPTION.............................................................................................. 6

4. CONTROL PANEL .......................................................................................................... 8

5. BEFORE FIRS USE .......................................................................................................... 8

6. DAILY USE .......................................................................................................................9

7. USING THE ACCESORIES ........................................................................................... 15

8. HINTS AND TIPS........................................................................................................... 16

9. CARE AND CLEANING................................................................................................ 19

10. TROUBLESHOOTING .................................................................................................. 22

11. INSTALLATION ............................................................................................................. 22

12. ENERGY EFFICIENCY .................................................................................................. 24

13. ENVIRONMENTAL CONCERNS ................................................................................. 25

FOR PERFECT RESULTS

Thank you for choosing this AEG product. we have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler

– features you might not nd on ordinary appliances. Please spend a few minutes

reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 2

1. SAFETY INFORMATION

ENGLISH 3

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible if an incorrect

installation and use causes injuries and damages. Always

keep the instructions with the appliance for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, we

recommend you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3 years should be kept away

unless continuously supervised.

1.2 General Safety

• Only a quali ed person must install this appliance and

replace the cable.

• Internally the appliance becomes hot when in

operation. Do not touch the heating elements that are

in the appliance. Always use oven gloves to remove or

put in accessories or ovenware.

• Before maintenance cut the power supply.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 3

4 www.aeg.com

• Ensure that the appliance is switched off before

replacing the lamp to avoid the possibility of electric

shock.

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch

the surface, which may result in shattering of the glass.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly quali ed persons in order to avoid a hazard.

• To remove the shelf supports rst pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

• Only use the core temperature sensor recommended

for this appliance.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING

Only a quali ed person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the

handle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is

installed below and adjacent safe

structures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

2.2 Electrical connection

WARNING

Risk of fire and electrical

shock.

• All electrical connections should be

made by a quali ed electrician.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Do not let mains cables to come in

touch with the appliance door,

specially when the door is hot.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 4

ENGLISH 5

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

• This appliance complies with the

E.E.C. Directives.

2.3 Use

WARNING

Risk of injury, burns and

electrical shock or explosion.

• Use this appliance in a household

only.

• Do not change the speci cation of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Deactivate the appliance after each

use.

• Be careful when you open the

appliance door while the appliance is

in operation. Hot air can release.

• Do not operate the appliance with

wet hands or when it has contact with

water.

• Do not apply pressure on the open

door.

• Do not use the appliance as a work

surface or as a storage surface.

• Open the appliance door carefully.

The use of ingredients with alcohol

can cause a mixture of alcohol and air.

• Do not let sparks or open ames

tocome in contact with the appliance

when you open the door.

• Do not put ammable products or

items that are wet with ammable

products in, near or on the appliance.

WARNING

Risk of damage to the

appliance.

• To prevent damage or discoloration

to the enamel:

– do not put ovenware or other

objects in the appliance directly

on the bottom.

– do not put aluminium foil directly

on the bottom of the appliance.

– do not put water directly into the

hot appliance.

– do not keep moist dishes and

food in the appliance after you

finish the cooking.

– be careful when you remove or

install the accessories.

• Discoloration of the enamel has no

effect on the performance of the

appliance. It is not a defect in the

sense of the warranty law.

• Use a deep pan for moist cakes. Fruit

juices cause stains that can be

permanent.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

• Always cook with the oven door

closed.

2.4 Care and cleaning

WARNING

Risk of injury, re, or damage

to the appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• Make sure the appliance is cold.

There is the risk that the glass panels

can break.

• Replace immediately the door glass

panels when they are damaged.

Contact the Service.

• Be careful when you remove the door

from the appliance. The door is

heavy!

• Clean regularly the appliance to

prevent the deterioration of the

surface material.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 5

6 www.aeg.com

1

2

3

4

5

9

8

7

6

3. PRODUCT DESCRIPTION

1

2

3

4

5

6

7

8

9

Control panel

Socket for Core

Temperature Sensor

Wire shelf

Enamel baking

tray

Enamel roasting

tray

Oven door

Self levels

Hot air fan

Fold down grill

(Top heat/Grill)

• Remaining fat or food in the

appliance can cause re.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

• If you use an oven spray, obey the

safety instructions on the packaging.

• Do not clean the catalytic enamel (if

applicable) with any kind of

detergent.

2.5 Internal light

• The type of light bulb or halogen

lamp used for this appliance is only

for household appliances. Do not use

it for house lighting.

WARNING

Risk of electrical shock.

• Before replacing the lamp, disconnect

the appliance from the power supply.

• Only use lamps with the same

specications.

2.6 Disposal

WARNING

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 6

ENGLISH 7

3.1 Accessories

Wire shelf

For cookware, cake tins,

roastst

3.2 Other Accesories (depending on the model)

• Pizza stone

To cook pizzas in a traditional way.

• Core temperature sensor

To measure how far the food is

cooked.

• Telescopic runners

For shelves and trays.

• Inner grid

To use together with the roasting pan.

Baking tray

For cakes and biscuits

Grill- /Roasting pan

To take and roast or as a

pan to collect fat

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 7

8 www.aeg.com

4. CONTROL PANEL

1

5

3

4

2

1

2

3

4

5

Electronic timer

Function indicator

Function selector

Temperature indicator

Temperature selector

Start Guide accompanying this manual

on how to do this.

• Cool the oven with the door open so

that it ventilates and no odours remain

inside it.

• Once cold, clean the oven and

accessories.

During this first operation, smoke and

smells will be produced. The kitchen

should therefore be well ventilated.

There may be traces of grease and other

substances in the oven as a result of its

manufacturing process. These should be

removed by means of the following

procedure:

• Remove all of the packaging from your

oven, including the protective plastic,

if any.

• Turn the oven to setting , or else

place it on the defect settingt , at

200ºC, for 1 hour. Consult the Quick

5. BEFORE FIRST USE

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 8

ENGLISH 9

clean and free of obstacles when

plugging in the oven.

If the clock does not respond correctly

when you touch the glass, unplug the

oven for a few seconds and then plug it

in again. Doing this causes the sensors

to adjust automatically so that they will

react once more to fingertip control.

CAUTION

The electronic clock features Touch-

Control technology. To operate,

simply touch the glass control

symbols with your fingertip.

The touch control sensitivity continuously

adapts to ambient conditions. Make sure

the glass surface of the control panel is

6.1 Setting the time on the

Electronic Clock

6.2 Manual Operation

The oven is ready to be used when the

clock has been set. Select a cooking

function and a temperature.

When you begin cooking, temperature

indicator lights up to indicate that the

When the oven is connected to the

power network, AUTO (A) and the

gures on the timer will ash. Set the

current time of day as follows:

1 Press in the and buttons

simultaneously till you hear a beep. A

point (C) between the gures of the

timer will start ashing.

2 Set the correct time of day using the

and buttons. You will hear a

beep conrming the time selected.

The heat symbol (B) stays lit.

IMPORTANT

The time can be changed whenever

you like; follow the instructions

above to do so.

oven is heating the contents; the

indicator goes out when the selected

temperature is reached.

Set the controls to to turn the oven

off.

6. DAILY USE

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 9

10 www.aeg.com

6.3 Oven Functions

Oven function Application

Off position

Cooking

Conventional

with fan

Grilling

Fast Grilling

Grillingl with

fan

True fan cooking

Pizza Setting

Lower element

Grill and Lower

element

Defrost

Switch off oven

It is used for sponges and cakes where the heat

received must be uniform to achieve a spongy texture.

Appropriate for roasts and cakes. The fan spreads the

heat uniformly inside the oven.

For preparing dishes with supercial roasting. It allows

the outer layer to be browned without affecting the

inside of the food. Ideal for at food, such as steaks,

ribs, sh, toast.

Allows greater surfaces to be prepared, than with the

grill, together with higher power reducing the time

required for browning of the food.

Allows uniform roasting at the same time as surface

browning. Ideal for grills. Special for large volume

pieces, such as poultry, game etc. It is recommended

to put the item on a rack with a tray beneath to collect

the stock and juices.

The fan distributes the heat produced by an element

located at the rear of the oven. Due to the uniform

heat distribution, it allows roasting and baking to take

place at two heights at the same time.

This cooking mode allows defrosting of food. To do

this, set the temperature selector to position.

To bake food on 1 shelf position for a more intensive

browning and a crispy bottom. Set the temperature to

220º during 24 min. to preheat the oven.

Heats only from beneath. Suitable for heating dishes

and raising pastry and similar.

Special for roasts. It can be used for any piece,

whatever its size.

To defrost frozen food.

CAUTION

While using the Grilling, Fast

Grilling or Grilling with fan, the

door must be kept closed.

NOTE

The pilot light remains on in any

cooking function.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 10

ENGLISH 11

6.4 Functions of the Electronic

Clock

The timer has different functions:

Clock timer

• This timer will give off an acoustic

signal after the time period has

expired. The oven does not have to

be in use for this to happen.

Baking time

• When the baking time set has

elapsed, the oven will switch off

automatically.

End time

• When the end time set has elapsed,

the oven will switch off automatically.

IMPORTANT

Baking time and end time

• When the end time set has elapsed,

the oven will switch off automatically.

The baking time set determines when

the oven will be switched on.

This function is used to automatically

switch the oven on and off. The

switch-on time of the oven is

calculated by inputting an end time

and the baking time required.

6.5 Changing the timer pitch

1 Simultaneously press the buttons

and .

A point of light will flash between the

figures on the timer.

2 Press the time button (D).

The indicator ton1 will appear on the

timer screen.

3 Repeatedly pressing the button will

change the pitch of the clock timer.

6.6 Setting the time on a clock

timer

1 Hold the time button (D) for a few

moments till the timer symbol

between the figures on the timer starts

flashing.

2 Set the alarm time of the clock timer

using the and buttons.

You will hear a beep and the display

will show the current time.

The clock timer is programmed.

An acoustic signal will go off after the

time set has elapsed and the timer

symbol (E) will begin flashing.

3 Press any key to switch off the acoustic

signal.

The timer symbol continues to flash.

4 Hold the time button in for a few

moments to end the clock timer

function.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 11

12 www.aeg.com

the time button (A) in for a few moments

till the AUTO symbol starts flashing. You

can then change the baking time by

pressing or buttons. You will hear

a beep confirming the change.

IMPORTANT

You can check the time remaining on the

clock timer whenever you wish by

holding the time button (D) in for a few

moments till the clock symbol starts

flashing. You can then change the time

selected by pressing the and

buttons. You will hear a beep confirming

the change.

6.7 Setting a baking time

1 Hold the time button (D) in for a few

moments till you hear a beep. If the

time button (D) is then pressed again,

the word time appears in the display.

2 Set the baking time using the and

buttons.

You will hear a beep, the current time

appears and the AUTO symbol stays

lit. When the baking time has

elapsed, the oven will switch off

automatically.

3 Set a baking function and

temperature.

After the baking time has elapsed, the

oven is switched off and an acoustic

signal goes off.

4 Press any key to switch off the acoustic

signal.

The oven remains switched off and the

AUTO symbol flashes.

5 Hold the time button (A) in for a few

moments till you hear a beep to end

the function. Turn the oven function

knob and temperature knob to the off

position to switch the oven off.

You can check the baking time

remaining whenever you wish by holding

IMPORTANT

Hold the time button (D) in for a few

moments to end the baking time

function.

6.8 Setting an end time

1 Hold the time button (D) in for a few

moments till you hear a beep.

2 Press the time button (D) again till the

word End appears in the display.

3 Set the end time using the and

buttons.

You will hear a beep, the current time

appears and the AUTO symbol stays

lit. When the end time is reached, the

oven will switch off automatically.

4 Set a baking function and

temperature.

If the end time is reached, the oven is

switched off and an acoustic signal

goes off.

5 Press any key to switch off the acoustic

signal.

The oven remains switched off and the

AUTO symbol flashes.

6 Hold the time button (D) in for a few

moments till you hear a beep to end

the function. Turn the oven function

knob and temperature knob to the off

position to switch the oven off.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 12

ENGLISH 13

PLEASE NOTE

The time at which the baking process

starts is the end time minus the baking

time. For example: the end time is set to

5:00 PM and the baking time is 2 hours.

In that case the oven will switch on at

3:00 PM!

The oven will be switched off and an

acoustic signal will go off once the

baking time programmed has elapsed.

6 Press any key to switch off the acoustic

signal.

The oven remains switched off and the

AUTO symbol flashes.

7 Hold the time button (D) in for a few

moments till you hear a beep to end

the function. Turn the oven function

knob and temperature knob to the off

position to switch the oven off.

You can check the baking process

whenever you wish by holding the time

button (D) in for a few moments.

IMPORTANT

An end time can still be set while the

oven is in use. Follow the instructions

above to do so (in that case the oven

function and temperature do not have to

be reset).

You can check the end time of the

baking process whenever you wish by

holding the time button (A) in for a few

moments. If you want to change the end

time, you should cancel the function by

simultaneously pressing the and

buttons. Then set an end time again.

6.9 Setting baking time and

end time

1 Hold the time button (D) in for a few

moments till you hear a beep. If the

time button (D) is then pressed again,

the word time appears in the display.

2 Set the baking time using the and

buttons.

3 Press the time button (D) again till the

word End appears in the display.

4 Set the end time with the and

buttons.

You will hear a beep, the current time

appears and the AUTO symbol stays

lit.

5 Set a baking function and

temperature.

The oven remains switched off, with

the AUTO symbol in the display. The

oven has been programmed.

The oven starts when the baking process

should begin and bakes for the baking

time set. The AUTO symbol and the

baking symbol are lit in the display.

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 13

14 www.aeg.com

6.11 Using the Core

temperature sensor

1 Place the meat to be roasted with the

Core temperature sensor in it in the

oven.

2 Remove the cover from the

connection point at the top right of

the oven and insert the plug of the

probe into the connection point.

3 As soon as the Core temperature

sensor is connected to the oven you

see the temperature measured by the

probe on the left in the display and the

temperature selected standard for the

probe (80º C) on the right. The display

alternately shows the current time of

day and the temperature set and the

temperature measured by the probe.

PLEASE NOTE

When the power is interrupted, the

programming of the timer is deleted and

the figures 00:00 appear in the display.

Set the current time of day and

programme the timer again.

6.10 Setting the Core

temperature sensor

The Core temperature sensor measures

the temperature in the meat to be roasted.

The oven switches off automatically

when the probe detects a preselected

temperature.

Roasting with the Core temperature

sensor provides an optimum roasting

result regardless of the type of meat or

fish to be roasted.

• Only use the original Core temperature

sensor that comes with the oven.

• Insert the probe in the meat before

starting roasting.

• Insert the probe in one side of the

meat to be roasted, so that the point

ends up in the middle of the meat.

• Insert the probe in the meat all the way

to the handle.

• We recommend turning the meat

halfway the process. Take this into

account when inserting the probe.

• The point of the probe should not

touch any bones or fat zones. Neither

should it end up in a hollow zone, as

may be the case for poultry.

If you wish to change the programming,

you should cancel the function by

simultaneously pressing the and

buttons. Then set the baking time and

an end time again.

IMPORTANT

If the Core temperature sensor measures

very low temperatures (for very cold

products), the display shows 30ºC. If the

Core temperature sensor measures very

high temperatures, the display shows

99ºC.

An acoustic signal goes off if the probe

is not connected properly.

4 Simultaneously press the buttons

and .

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 14

ENGLISH 15

9 Set the operating buttons of the

oven to the off position and remove

the Core temperature sensor.

10 The perfectly roasted meat can now

be served.

PLEASE NOTE

When roasting with the Core temperature

sensor you access the programming

functions of the timer such as the clock

timer, by holding the time button in for a

few moments. The temperatures of the

probe are always displayed on the timer

screen.The clock timer is set when the

timer symbol lights up.

5 Press the time button (D) twice.

6 Set the desired temperature for the

inside of the meat using the and

buttons (see the table).

Hold the buttons in for a few

moments the first time. Then quickly

press them repeatedly.

7 Set a baking function and roasting

temperature.

When the probe senses the

temperature you selected in the

meat to be roasted, the oven

switches off and you will hear an

acoustic signal.

8 Press any key to switch off the

acoustic signal.

Roast Probe temperature Remarks

Roast beef 35 - 40° C Rare

Roast beef 45 - 50° C Medium

Roast beef 55 - 60° C Well-done

Leg of lamb 65 - 70° C

Shank 80 - 85° C

Loin (section) 65 - 70° C

Ham 80 - 85° C

Chicken 75 - 80° C

Roast turkey 80 - 85° C

Your oven will come supplied with the

following oven furniture:

(A) Oven shelf

(B) Enamelled deep baking tray

The numbers 1 – 5, indicate the different

shelf positions that you can utilise within

the oven.

You should use the shelf position(s) that

you find are best suited to your personal

cooking preferences.

Insert the oven shelf and deep baking tray

between the 2 side rails at any position (1

to 5) on both sides. The oven shelf has

safety stops to prevent accidental

withdraw. After engaging the oven shelf

into the side rails, as you push the oven

shelf into the oven, lift the front of the

shelf slightly to bypass the stops and allow

the oven shelf to slide fully into the rails.

To remove the oven shelf, gently pull the

oven shelf outwards. When the shelf

stops, lift the front slightly to bypass the

safety stops and then completely

withdraw the oven shelf from the oven.

When installed correctly, the shelf and

tray should be horizontal and not on an

angle.

7.1 Wire-Shelf and trays

7. USING THE ACCESORIES

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 15

16 www.aeg.com

Make sure you push back the telescopic

runners fully in the appliance before you

close the oven door.

7.2 Telescopic Runners

Keep the installation instructions

for the telescopic runners for future

use.

With telescopic runners you can put in

and remove the shelves more easily.

CAUTION

Do not clean the telescopic runners

in the dishwasher. Do not lubricate

the telescopic runners.

1 Pull out the right and left hand

telescopic runners.

2 Put the wire shelf on the telescopic

runners and carefully push them into

the appliance.

• To cook any food, insert the tray or

grill in the side rails in the oven.

• Do not place containers or food on

the bottom surface of the oven.

Always use the trays and grill.

• Do not pour water on the bottom

surface of the oven when in use; this

may damage the enamel.

• Open the oven door as little as

possible during cooking. This will

reduce power consumption.

• It is normal for condensation to occur

on the oven door when cooking

dishes with a high liquid content.

• Clean the oven interior to remove

traces of grease or food, which could

later give off smoke and odours and

cause stains to appear.

8.1 General information

• The oven must always be operated

with the door closed.

• The manufacturer takes no

responsibility for any use of the oven

other than for the home preparation

of food.

• Do not store oil, fats or inflammable

materials inside the oven. This may be

dangerous if the oven is turned on.

• Do not lean or sit on the open oven

door. You could damage it, as well as

endanger your own safety.

• Do not cover the bottom of the oven

with aluminium foil as this may affect

cooking performance and damage the

enamel inside the oven and the

interior of your kitchen unit.

8. HINTS AND TIPS

°C

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 16

ENGLISH 17

8.2 Cooking tables

Starters

Food Weight Tray

Position

Cooking Tempera-

ture (ºC)

Time Recepta-

cle

Pasty 2 2 and 3 160-180 30-40

160-180 30-35

Tray

Fish

Food Weight Tray

Position

Cooking Tempera-

ture (ºC)

Time Recepta-

cle

Salted Dorado 2 2 and 3 190-210 25-30

180-200 25-30

Tray

Pizza 1,2 2 and 3 190-210 15-20

170-190 15-20

Grid

Quiche 2 2 and 3 170-190 30-35

160-180 30-40

160-180 40-45

Quiche

Mould

Vegetable Pastry 3,5 1 190-210 30-35

170-190 30-35

170-190 25-30

Shallow

dish

Vegetable Pie 2,5 1 190-210 55-65

170-190 45-50

Shallow

dish

Trout 2 2 and 3 190-210 20-25

180-200 15-20

180-200 20-25

Shallow

dish

Baked potatoes 1,5 1 180-200 60-65

180-200 50-55

Tray

Salmon in greased

paper

2 2 and 3 180-200 20-25

170-190 15-20

Tray

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 17

18 www.aeg.com

Food Weight Tray

Position

Cooking Tempera-

ture (ºC)

Time Recepta-

cle

Sole 1 1 170-190 15-20

160-180 10-15

Tray

Fish Pie 2,5 1 190-210 40-45

180-200 50-55

Casserole

dish

Hake 1,5 1 190-210 25-30

180-200 20-25

Tray

Meat

Food Weight Tray

Position

Cooking Tempera-

ture (ºC)

Time Recepta-

cle

Suckling Pig 4 2 and 3 170-190 75-85

160-180 75-85

160-180 80-90

Tray

Hamburguers 1 1 180-200 5-10 Grid

Sausages 2 1 180-200 15-20 Grid

Rabbit 3 2 and 3 180-200 60-65

160-180 45-50

170-190 45-50

Tray

Lamb 3 2 and 3 190-210 60-65

170-190 50-55

180-200 45-50

Tray

Salted Pork Loin 1,5 1 170-190 40-45

160-180 30-35

170-190 30-35

Tray

Chicken 3 2 and 3 190-210 50-55

170-190 45-50

Tray

Joint of Meat 1,75 1 170-190 35-40

170-190 30-35

Casserole

dish

Roast-beef 2,5 1 190-210 40-45

180-200 40-45

Tray

3172742-002 In-Fr. (AEG) 17/10/14 09:49 Página 18

ENGLISH 19

Cakes and desserts

Food Weight Tray

Position

Cooking Tempera-

ture (ºC)

Time Recepta-

cle

Flan 1 2 and 3 160-170 60-65

140-160 40-45

Bread

Mould

Cup Cakes 1 2 and 3 160-180 30-35

140-160 35-30

Tray

Puff-pastry biscuits 0,5 2 and 3 180-200 20-25

170-190 20-25

Tray

Cheesecake 2 2 and 3 180-200 45-50

160-180 30-40

Cheescake

Mould

Hojaldre 0,5 1

2 and 3

170-190 15-20

170-180 15-20

Tray

Yoghurt 1 litre (*) 50 8 hours Yoghurt

pots

(*) Place the yoghurt pots directly on the bottom of the oven.

Use of Fold-down Grill (depending on

Model)

To clean the top part of the oven:

• Wait until the oven is cold.

• In other oven models, push the rod of

the grill element (B) with both hands

until it is released from the upper

fastening point.

CAUTION

Disconnect the appliance from

mains power supply before any

operation.

9.1 Cleaning the Oven Interior

1 Easy-to-clean enamel ovens

Use nylon brushes or sponges with

warm soapy water to clean enamelled

surfaces such as the bottom of the

oven. Clean when the oven is cold.

Use oven-cleaning products only on

enamelled surfaces and always follow

the manufacturer’s instructions.

2 Ovens coated in special enamel

adapted to other cleaning systems

Please consult the Specifications

Sheet for your oven.

CAUTION

Do not clean the oven interior with

steam or pressurised water

cleaning equipment. Do not use

metal scouring pads, wire brushes

or any utensil that can scratch the

enamel.

9. CARE AND CLEANING

B

3172742-002 In-Fr. (AEG) 17/10/14 09:50 Página 19

20 www.aeg.com

4 Holding the door at the sides with

both hands, raise and remove the

door from the oven until the hinges

(G) have been completely removed.

To mount the door, proceed in reverse

order.

CAUTION

Do not remove the safety pins at

any time since the hinge is taut and

may cause injury. It would also be

impossible to mount the door

without the pins being in place.

To mount the door, hold it with both

hands and insert the hinges in the

appropriate openings in the front of the

oven. Slowly open the door until it is

fully open.

9.4 Cleaning the Large Inner

CAUTION

Be very careful when removing the

inner glass, as the oven door will

close.

• Turn the element round and clean the

upper part of the oven.

• Finally, return the grill element to its

original position.

CAUTION

For your own safety, never turn the

oven on with-out the rear panel in

position since this protects the fan.

9.2 Cleaning the Oven

Exterior and Accessories

Clean the outside of the oven and

accessories with warm soapy water or

with a mild detergent.

Take great care when cleaning stainless

steel surfaces. Use only sponges or

cloths that do not scratch.

9.3 Cleaning the Oven Door

Do not use metal scouring pads, wire

brushes or commercially available or

abrasive powder cleansers to clean the

oven door as they could scratch the

surface and cause the glass to break.

In some oven models the door may be

removed to make them easier to clean, by

proceeding as follows:

1 Open the door.

2 Turn the two clamps (F) right round.

F

3 Close the door until it fits in the two

clamps.

G

3172742-002 In-Fr. (AEG) 17/10/14 09:50 Página 20

La page est en cours de chargement...

AEG BE6915001M Manuel utilisateur

AEG BE6915001M Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents