Wacker Neuson BS50-4As Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Operator’s Manual
Notice d'emploi
Vibratory Rammer
Pilonneuse
BS50-4s, BS50-4As
BS60-4s, BS60-4As
BS70-4As
Type
BS50-4s, BS50-4As, BS60-4s,
BS60-4As
, BS70-4As
Document 5200017353
Date
0117
Version
08
Language EN-FR
5200017353
Copyright notice
© Copyright 2017 by Wacker Neuson Production Americas LLC
All rights, including copying and distribution rights, are reserved.
This publication may be photocopied by the original purchaser of the
machine. Any other type of reproduction is prohibited without express
written permission from Wacker Neuson Production Americas LLC.
Any type of reproduction or distribution not authorized by Wacker
Neuson Production Americas LLC represents an infringement of valid
copyrights. Violators will be prosecuted.
Trademarks
All trademarks referenced in this manual are the property of their
respective owners.
Manufacturer
Wacker Neuson Production Americas LLC
N92W15000 Anthony Avenue
Menomonee Falls, WI 53051 U.S.A.
Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957
www.wackerneuson.com
Original instructions
This Operators Manual presents the original instructions. The original
language of this Operator’s Manual is American English.
wc_tx003624gb_FM10.fm
3
Rammer
Foreword
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
identification
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
Serial number
(S/N)
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Machine
documentation
From this point forward in this documentation, Wacker Neuson Production
Americas LLC will be referred to as Wacker Neuson.
Keep a copy of the Operator’s Manual with the machine at all time
s.
Fo
r spare parts information, please see your Wacker Neuson Dealer, or visit
the
W
acker Neuson website at http://www.wackerneuson.com/.
When ordering parts or requesting service information, be prepared to
provide
the machine model number, item number, revision number, and serial number.
Machine Item Number
BS 50-4s, BS 50-4As 5200000644, 5200000662, 5200000679, 5200000680,
5200018226, 5200018219, 5100015099, 5100025357,
5100027197
BS 60-4s, BS 60-4As 5200000647, 5200000648, 5200000667, 5200000668,
5200000674, 5200000675, 5200014910, 5200018231,
5200018232, 5200018233, 5200022984, 5100015123,
5100027198
BS 70-4As 5100015124, 5100015126, 5100027199
wc_gr011588
Serial Number:
wc_tx003624gb_FM10.fm
4
Rammer
Foreword
Expectations
for
information in
this manual
This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change any
portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
CALIFORNIA
Proposition
65 Warning
Combustion exhaust, some of its constituents, and certain vehicle components
contain or emit chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
Laws
pertaining to
spark
arresters
NOTICE: State Health Safety Codes and Public Resources Codes specify that in
certain locations spark arresters be used on internal combustion engines that use
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental
discharge of sparks or flames from the engine exhaust. Spark arresters are
qualified and rated by the United States Forest Service for this purpose. In order to
comply with local laws regarding spark arresters, consult the engine distributor or
the local Health and Safety Administrator.
Manufacturers
approval
This manual contains references to approved parts, attachments, and
modifications. The following definitions apply:
Approved parts or attachments are those either manufactured or provided by
Wacker Neuson.
Approved modifications are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wacker
Neuson.
Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
Serious injury hazards to the operator and persons in the work area
Permanent damage to the machine which will not be covered under warranty
Contact your Wacker Neuson dealer immediately if you have questions about
approved or unapproved parts, attachments, or modifications.
2016-CE-BS50-4s_Honda_en_FM10.fm
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS50-4As
Vibratory Rammer
To compact soil
5200018219 5100015099
5100027197
2.35 kW 2.70 kW
103 db(A) 104 db(A)
108 db(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 03.01.17
Original Declaration of Conformity
Keith Herr
Vice President and Managing Director
For Wacker Neuson
Paul Sina
Manager, Product Engineering
For Wacker Neuson
Jeff Volden
Director, Product Engineering
For Wacker Neuson
2016-CE-BS50-4s_Robin_en_FM10.fm
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS50-4s
Vibratory Rammer
To compact soil
5200000662
2.4 kW
103 dB(A)
108 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Original Declaration of Conformity
Menomonee Falls, WI, USA, 03.01.17
Keith Herr
Vice President and Managing Director
For Wacker Neuson
Paul Sina
Manager, Product Engineering
For Wacker Neuson
Jeff Volden
Director, Product Engineering
For Wacker Neuson
2016-CE-BS60-4s_Honda_en_FM10.fm
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS60-4As
Vibratory Rammer
To compact soil
5200018232, 5200018233 5100015123
5100027198
2.35 kW 2.7 kW
104 db(A)
108 db(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 03.01.17
Original Declaration of Conformity
Keith Herr
Vice President and Managing Director
For Wacker Neuson
Paul Sina
Manager, Product Engineering
For Wacker Neuson
Jeff Volden
Director, Product Engineering
For Wacker Neuson
2016-CE-BS60-4s_Robin_en_FM10.fm
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS60-4s
Vibratory Rammer
To compact soil
5200000667, 5200000675, 5200000674, 5200000668
2.4 kW
102 dB(A)
108 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel,
Wacker Neuson Produktion GmbH & Co. KG,
Wackerstrasse 6
,
85084 Reichertshofen, Germany
Original Declaration of Conformity
Menomonee Falls, WI, USA, 03.01.17
Keith Herr
Vice President and Managing Director
For Wacker Neuson
Paul Sina
Manager, Product Engineering
For Wacker Neuson
Jeff Volden
Director, Product Engineering
For Wacker Neuson
2016-CE-BS70-4s_Honda_en_FM10.fm
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS70-4As
Vibratory Rammer
To compact soil
5100015124, 5100027199
2.7 kW
104 db(A)
108 db(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 03.01.17
Original Declaration of Conformity
Keith Herr
Vice President and Managing Director
For Wacker Neuson
Paul Sina
Manager, Product Engineering
For Wacker Neuson
Jeff Volden
Director, Product Engineering
For Wacker Neuson
Table of Contents
Rammer
wc_bo5200015017_08_FM10TOC.fm
15
Foreword 3
EC Declaration of Conformity 5
1 Safety Information 17
1.1 Signal Words Used in this Manual ..................................................... 17
1.2 Machine Description and Intended Use ............................................. 18
1.3 Safety Guidelines for Operating the Machine ..................................... 19
1.4 Safety Guidelines for Lifting the Machine ........................................... 20
1.5 Service Safety .................................................................................... 21
1.6 Operator Safety while Using Internal Combustion Engines ............... 23
2 Labels 24
2.1 Label Locations .................................................................................. 24
2.2 Label Meanings .................................................................................. 25
3 Lifting and Transporting 29
3.1 Lifting the Rammer ............................................................................. 29
3.2 Transporting the Rammer .................................................................. 30
4 Operation 33
4.1 Preparing the Machine for First Use ................................................... 33
4.2 Recommended Fuel ........................................................................... 33
4.3 Refueling the Machine ........................................................................ 34
4.4 Position of the Operator ..................................................................... 35
4.5 Before Starting ................................................................................... 35
4.6 Starting, Operating, and Stopping the Machine—WM 100 ................ 36
4.7 Starting, Operating, and Stopping the Machine—Honda ................... 38
4.8 Low Oil Shut-Off Switch—WM100 ..................................................... 40
4.9 Low Oil Shut-Off Switch—Honda ....................................................... 41
4.10 Emergency Shutdown Procedure ....................................................... 41
4.11 Optional Equipment ............................................................................ 42
5 Maintenance 43
5.1 Maintaining the Emission Control System .......................................... 43
5.2 Periodic Maintenance Schedule ......................................................... 44
5.3 Servicing the Air Cleaner .................................................................... 45
Table of Contents
Rammer
wc_bo5200015017_08_FM10TOC.fm
16
5.4 Checking the Fuel Lines and Fittings ..................................................46
5.5 Maintaining the Shoe Hardware ..........................................................47
5.6 Inspecting the Machine .......................................................................48
5.7 Cleaning the Engine Cooling Fins .......................................................49
5.8 Cleaning and Checking the Spark Plug ...............................................50
5.9 Checking and Changing the Engine Oil ..............................................51
5.10 Checking and Changing the Ramming System Oil .............................53
5.11 Inspecting and Cleaning the Fuel Filter ...............................................55
5.12 Replacing the In-Line Fuel Filter Assembly .........................................56
5.13 Long-Term Storage .............................................................................57
5.14 Machine Disposal / Decommissioning .................................................58
6 Troubleshooting 59
7 Technical Data 60
7.1 BS 50-4s ..............................................................................................60
7.2 BS 50-4As ...........................................................................................61
7.3 BS 60-4s ..............................................................................................62
7.4 BS 60-4As ...........................................................................................63
7.5 BS 70-4As ...........................................................................................64
7.6 Sound Measurements .........................................................................65
7.7 Vibration Measurements .....................................................................66
7.8 Dimensions ..........................................................................................67
8 Emission Control Systems Information
and Warranty—Gasoline 69
8.1 Emission Control System Background Information .............................69
8.2 Limited Defect Warranty for Exhaust Emission Control System .........70
8.3 Limited Defect Warranty for Wacker Neuson Evaporative
Emission Control Systems ..................................................................70
wc_si000836gb_FM10.fm
17
Rammer
Safety Information
1 Safety Information
1.1 Signal Words Used in this Manual
This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE
signal words which must be followed to reduce the possibility of personal injury,
damage to the equipment, or improper service.
NOTICE: Used without the safety alert symbol, NOTICE in
dicates a situation
which, if not avoided, could result in property damage.
Note: A Note contains additional information important to a procedure.
This is the safety alert symbol. It is used to alert you to potential personal hazards.
Obey all safety messages that follow this symbol.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
To avoid death or serious injury from this type of hazard, obey all safety mes-
sages that follow this signal word.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
To avoid possible death or serious injury from this type of hazard,
obey all safety
messages that follow this signal word.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
To avoid possible minor or moderate injury from this type of hazard,
obey all
safety messages that follow this signal word.
wc_si000836gb_FM10.fm
18
Rammer
Safety Information
1.2 Machine Description and Intended Use
This machine is a vibratory rammer. The Wacker Neuson Rammer consists of a
gasoline or diesel engine, a clutch, a fuel tank, a spring-loaded ramming system, a
ramming shoe, and a handle. The engine transmits power through the ramming
system and ramming shoe, generating percussive impact force to compact soil.
The operator guides and controls the machine from behind using the handle.
This machine is intended to be used for compacting cohesive, mixed, and granular
soils in confined areas.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty.
The following are some examples of misuse:
Using the machine as a ladder, support, or work surface
Using the machine to carry or transport passengers or equipment
Using the machine as a hammer or for other demolition work
Attaching the machine to any other machine
Operating the machine outside of factory specifications
Operating the machine in a manner inconsistent with all warnings found on the
machine and in the Operator’s Manual
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
Heat, noise, exhaust, and carbon monoxide from the engine
Fire hazards from improper refueling techniques
Fuel and its fumes
Personal injury from improper lifting techniques or operating techniques
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
wc_si000836gb_FM10.fm
19
Rammer
Safety Information
1.3 Safety Guidelines for Operating the Machine
Operator
training
Before operating the machine:
Read and understand the operating instructions contained in all manuals
delivered with the machine.
Familiarize yourself with the location and proper use of all controls and safety
devices.
Contact Wacker Neuson for additional training if necessary.
When operating this machine:
Do not allow improperly trained people to operate the machine. People
operating the machine must be familiar with the potential risks and hazards
associated with it.
Operator
qualifications
Only trained personnel are permitted to start, operate, and shut down the machine.
They also must meet the following qualifications:
have received instruction on how to properly use the machine
are familiar with required safety devices
The machine must not be accessed or operated by:
children
people impaired by alcohol or drugs
Application
area
Be aware of the application area.
Keep unauthorized personnel, children, and pets away from the machine.
Remain aware of changing positions and the movement of other equipment and
personnel in the application area/job site.
Identify whether special hazards exist in the application area, such as toxic
gases or unstable ground conditions, and take appropriate action to eliminate
the special hazards before using the machine.
Be aware of the application area.
Do not operate the machine in areas that contain flammable objects, fuels, or
products that produce flammable vapors.
Safety
devices,
controls, and
attachments
Only operate the machine when:
All safety devices and guards are in place and in working order.
All controls operate correctly.
The machine is set up correctly according to the instructions in the Operator’s
Manual.
The machine is clean.
The machine’s labels are legible.
To ensure safe operation of the machine:
Do not operate the machine if any safety devices or guards are missing or
inoperative.
Do not modify or defeat the safety devices.
Only use accessories or attachments that are approved by Wacker Neuson.
wc_si000836gb_FM10.fm
20
Rammer
Safety Information
Safe
operating
practices
When operating this rammer:
Remain aware of the rammer’s moving parts. Keep hands, feet, and loose
clothing away from the rammer’s moving parts.
When working near the edges of pits, slopes, trenches, and platforms, always
operate the rammer in such a way that there is no possibility of it tipping over or
falling in.
When operating this rammer:
Do not operate a rammer in need of repair.
Do not tamper with or disable the function of the operating controls.
Do not leave the rammer running unattended.
Do not consume the operating fluids used in this machine. Depending on your
machine model, these operating fluids may include water, wetting agents, fuel
(gasoline, diesel, kerosene, propane, or natural gas), oil, coolant, hydraulic fluid,
heat transfer fluid (propylene glycol with additives), battery acid, or grease.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
After Use
Stop the engine when the machine is not being operated.
Close the fuel valve on engines equipped with one when the machine is not
being operated.
Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
1.4 Safety Guidelines for Lifting the Machine
When lifting the machine:
Make sure slings, chains, hooks, ramps, jacks, forklifts, cranes, hoists, and any
other type of lifting device used is attached securely and has enough weight-
bearing capacity to lift or hold the machine safely. See chapter Technical Data
for machine weight.
Remain aware of the location of other people when lifting the machine.
Only use the lifting points and tie-downs described in the Operator’s Manual.
Make sure the transporting vehicle has sufficient load capacity and platform size
to safely transport the machine.
To reduce the possibility of injury:
Do not stand under the machine while it is being lifted or moved.
Do not get onto the machine while it is being lifted or moved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156

Wacker Neuson BS50-4As Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues