R03.001_05/06/2015
TECHNICAL FILE
Novopeldaño® Safety Plus
General Features
Material: Anodized aluminum + non-slip strip
Page 1 of 2
Reference Width(a): Height(h): Length:
NPSFPAL10*
44 mm
10 mm
2,5 m
NPSFPAL12* 12 mm
NPSFPAL10*1 10 mm
1 m
NPSFPAL12*1 12 mm
Applications
* Strip color to choose: black, yellow/black, yellow or grey.
Stair nosing prole made of anodized aluminum, to be installed
during the tiling. This prole has a non-slip strip which helps to fulll
accessibility requirements and improves the slip resistance value of
the ooring. This strip is available in contrast colors such as black,
yellow/black, yellow or even grey if you want a more decorative
nish. Ideal for both residential or commercial use.
Novopeldaño® Safety Plus is a prole designed to be placed as a stair nosing. Its striated face side
and the non-slip strip, help to fulll the DB-SUA from the CTE (Spanish Technical Building Code), as it
improves the value of slip resistance of the ooring where is installed. It also fullls the DIN51130 most
demanding non-slip requirements.
Novopeldaño® Safety Plus is ideal for public areas such as airports, hospitals, hotels... Suitable for high
trafc areas.
R03.001_05/06/2015
TECHNICAL FILE
Novopeldaño® Safety Plus
Cleaning and maintenance
Installation
Page 2 of 3
Technical Features and tests
Materials
Aluminium
Non-slip strip
(*) Features non-slip strip
The base of Novopeldaño® Safety Plus is a prole made by extrusion of aluminum. These proles have
been anodized, improving through this process their corrosion and mechanical resistance and their
appearance.. The anodized applied, has the quality seal “Qualanod” which guarantees the quality of the
process and the resulting proles. This seal regulates several tests: appearance and color, thickness
measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic saline
chamber and nitric acid immersion.
Aluminum is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
The non-slip strip of Novopeldaño® Safety Plus is made of aluminum oxide in a 0,1 mm. PVC carrier. It
stands well outdoors, resists motor oil and water and has a certied slip resistance R13 (according to
DIN51130). This non-slip strip is DDA compliant.
Alloy 6063 AA y ASTM
L-3441 UNE 38-301-89
Fire resistance M0 UNE 23-727-90
Abrasion resistance Very good
Lightfastness Excellent
Appearance and color EN 12373-1
Working temperature (*) - 30ºC / +70ºC
Water resistance (*) 10 months
Chemical resistance (*) 8 months
Motor oil resistance(*) Excellent
Longlife 12-24 months (depen-
ding on use)
Sliding resistance (*) R13 DIN51130
1. Spread a big amount of thin-set mortar on the surface of the riser.
2. Place the tile on the riser and press to get an optimal adherence.
3. Then, spread a big amount of thin-set mortar on the tread and align the prole on its vertex so it
rests on the riser (Do not let overhang, the leverage may remove the step and the tiles). Then press
so the thin-set mortar could pass through the mechanized holes of the anchoring wing.
4. Place one tile on the tread, align it to the prole and press to get a perfect adhesion. You can tap it
softly with a rubber hammer.
5. Clean the possible leftover material and let dry.
Novopeldaño® Safety Plus is resistant to detegents and water. The product must be cleaned periodically
with a soft cloth. If you use a neutral liquid cleaner, you must rinse the prole with cold water and dry
it to remove the humidity excess. The persistent dirtiness can be removed by using cleaning approved
agents lightly abrasive or a grid covered with polished powder neutral. If a preserving agent is applied,
as well as keep a very thin layer of water repellent, note that it can’t be yellow,attract dust or dirt or
have iridescent effects.
TECHNICAL FILE
R03.001_05/06/2015
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
Technical information
You can nd out more information about the technical features of the Emac®’s products by downloa-
ding its Technical Files in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novopeldaño® Safety Plus
Indoors FlooringOutdoors
Page 3 of 3
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides)
-
1
-
2
-
3
Emac NPSFPAL38AN82 Guide d'installation
- Taper
- Guide d'installation
- Ce manuel convient également à
dans d''autres langues
Documents connexes
-
Emac NPSFAL65PL82 Manuel utilisateur
-
-
-
-
Emac NPMXTK7812 Guide d'installation
-
-
-
-
-
Emac NPXK12612 Manuel utilisateur