R03.001_16/01/2012
TECHNICAL FILE
Novoperi
Prole with broad visible side, made of high quality anodized or
lacquered aluminum, intended to be installed as a perimeter
nishing. This prole is highly versatile and it can be installed as
a stair nosing or countertop nish, in balconies or terraces, roofs,
windowsills... It is available in six anodized or lacquered trendy
colors, which are certied with the quality seals Qualanod and
Qualicoat.
General Features
Patent:
Community design
Nº 1.998.882-
(005,006,007,008,009,010)
Material:
Anodized aluminum
Lacquered aluminum
Lenght: 8ft2in / 2,5 m.l.
Dimensions: h:3/8” / 1/2” a: 2”
h:10/12 mm. a: 50mm.
Packaging: 12 u./box
Finishes:
Applications
Novoperi is a very versatile prole that can be installed as stair nosing or countertop nish, edge
protector, medium-height nish, in balconies or terraces, roofs, windowsills, etc.
Materials
Aluminum
Technical Features
Page 1 of 2
Alloy: 6063 (AA and ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness: Excellent
Appearance and color: EN 12373-1
Novoperi is a prole made by extrusion of aluminum. The bright silver and matt silver nishes have
been anodized, improving through this process their corrosion resistance, mechanical resistance and
appearance. The anodized applied has the quality seal Qualanod, which guarantees the quality of the
process and the resulting proles. This seal regulates several tests: appearance and color, thickness
measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic saline
chamber and nitric acid immersion.
TECHNICAL FILE
R03.001_16/01/2012
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
If you want to install Novoperi as a nishing and you don’t want to tile the front part of the installation,
just follow the instructions detailed above and obviate the two rst steps.
Installation
Cleaning and maintenance
Indoors Wall tiling Recyclable
Page 2 of 2
Novoperi
Stair nosing
As a nish (countertops, windowsills...)
1. Spread a big amount of thin-set mortar on the surface of the riser.
2. Place tiles on the riser and press them to get an optimal adherence.
3. Then, spread a big amount of thin-set mortar on the tread and align the prole to its vertex so it
rests on the riser (Do not let overhang, the leverage may remove the step and the tiles). Then press
it to let the thin-set mortar pass through the holes of the anchoring wing.
4. Place a tile on the tread, align it to the prole and press them to get a perfect adhesion. You can
tap it softly with a rubber hammer.
5. Clean the possible leftover material and let dry.
The cleaning must be done periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture. If dirtiness persists, clean the
prole with a solution with clean water and detergent or neutral soap 5%, brushing with a cloth that
has no particles that could scracht the nish. Ensure the lacquered surface is totally cold (maximum
20ºC) before the cleaning.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
The Earthen oxide, Oxidized gray, Misty white and Quarz sand nishes have been lacquered, obtaining
so a high quality and homogeneus surface. The lacquering has the quality seal Qualicoat, which gua-
rantees the quality of the process and the nal products.
Aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile,
malleable and highly durable.
Outdoors
-
1
-
2
dans d''autres langues
- English: Emac NPERI14738 User manual
Documents connexes
-
Emac NL39012 Manuel utilisateur
-
-
-
-
-
Emac NJMF3810 Manuel utilisateur
-
-
-
-