Emac NJMF3810 Manuel utilisateur

Taper
Manuel utilisateur
R03.001_11/06/2010
TECHNICAL FILE
ALUMINIUM
Aluminium is a very common and extraordinarily versatile material. It can be
transformed in a wide rage of shapes and different nishes. Aluminium is a
hard metal, exible, impermeable, has a longlife and it is 100% recyclable. The
proles of Emac® made of aluminium, are manufactured in two different alloys,
6063 y 1050A and are treated with lacquers and anodized with quality seals
Qualicoat and Qualanod respectively. These proles combine high mechanical
performance with quality nishes in multiple colors available.
Technical Features
Applications
Surface nishes
Emac® offers different nishes to its products in a wide range of colors:
Aluminium is one of the more used metals to manufacture all over the world. It is present in many
areas and in different forms. Sectors such as automotive, transporte, packaging for food conservation
or architecture and building, among others, are examples of the use of this material.
Emac® works with aluminium alloys. These alloys, 1050A and 6063, have high performance and are
available in multiple possibilities of nishes. These proles are manufactured by different processes
such as extrusion, rolling or folding.
Emac® has a wide range of products made of aluminium: decorative listellos, stair nosing, scotias,
edge protectors, etc. The excellent properties of aluminium, make it suitable to its application in any
product of this ranges. They can be installed depending on the nish chosen, outdoors or indoors, wall
or oor, always with excellent results and the maximum quality.
Page 1 of 2
Ductility High
Mechanical resistance Good
Tensile strenght 160-200 Mpa (N/mm
2
) pure aluminium
Yield 110 N/mm
2
Limit break 150 N/mm
2
Shear resistance 117 MPa
Elastic modulus 69
Corrosion resistance Very good
Density 2,7 g/cm
-3
Fire resistance
M0 según UNE 23-727-90
Non combustible against thermal action
Linear expansion coefcient 23,5 * 10
-6
m/mK
Recyclable Yes
- Anodized: Is an electrochemical surface treatment in which aluminium is protected by a surface layer
of alumina (aluminium oxide). The thickness of this layer determines the protection of the prole. The
anodizing, increases the resistance to abrasion and corrosion of aluminium and provides color through
dye processes. The anodized proles of Emac® are manufactured by processes certied with the
quality seal Qualanod, wich regulate the tests applied to the prole. The anodized nishes of Emac®
are available in different colors, original textures or decorative patterns with or without crystals.
TECHNICAL FILE
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical Files from www.emac.es
If you have any query please contact our Technical Department in [email protected]
Technical information
R03.001_11/06/2010
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) sales@emac.es // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
Cleaning and maintenance
Links
Cleaning must be done periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse
the prole with cold water and dry to remove excess moisture. If dirtiness persists, clean the prole
with a solution with clean water and detergent or neutral soap 5%, brushing with a cloth that has no
particles that could scracht the nish. Ensure the lacquered surface is totally cold (maximum 20ºC)
before the cleaning.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
- Lacquering: Lacquering consists on the application of lacquer on the surface of the prole. It can be
applied as powder coating, electrically charged with opposite sign to the support, melting and poly-
merizing in furnace. The lacquered of the proles of Emac® is certied by the quality seal Qualicoat,
which guarantee the quality of the processes and the nal products. Emac® offers in its catalog a
wide range of laquered. with surprising colors such as choral nacre, life green, mineral white...
-Technology of microbial control: This nish belongs to the range of sanitary and health solutions
of Emac®. It is a specic covering which protects the prole against harmful microorganisms such
as fungi, molds, yeasts and bacteria. It’s ideal for installations with requirements of high control of
bacteria (hospitals, nursery, etc.) and for the home environment. It is available in antibacterial colors
white and metallized.
- www.wikipedia.org
- www.instaladoresdealuminio.es
- www.aluminio.org
- www.eaa.net
- www.emac.es
Page 2 of 2
ALUMINIUM
- Natural: the natural nish is the common silver of aluminium. Natural aluminium, despite having a
protective natural layer on the surface, is chemichally more vulnerable than the rest of the nishes
offered in the Emac®’s catalogue, which improve notably its protection. This material can suffer from
color change in humid or outdoor environments. It has no additional protection against corrosion
and is more easily scratched. We recommend protecting natural aluminium by using varnishes or
specic paintings to improve its appearance and properties. It is not recommended to install natural
aluminium without additional protection in humid or saline environments.
  • Page 1 1
  • Page 2 2

Emac NJMF3810 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues