R03.001_11/01/2012
TECHNICAL FILE
Novosuelo/Novopared
Aluminium
General Features
Material: Aluminum
Length: 8ft2in / 2,5 m.l.
Dimensions (h):
1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 9/16”, 11/16”, 3/4”,
7/8”, 1”, 1’1/16”, 1’3/16”
3, 4.5, 6, 8, 10, 12.5, 15, 17.5, 20, 22.5, 25, 27.5, 30 mm
Packaging: 50 u./box
Finishes: Anodized/lacquered/natural aluminium
Applications
Novosuelo/Novopared Aluminum is a prole designed to protect edges of ceramic installations.
It can also be installed as a ooring separator or countertop nish among others.
Technical Features and tests
Page 1 of 3
Materials
Alloy:
6063 (AA y ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: High
Lightfastness: Excellent
Appearance and color: EN 12373-1
Aluminium
Prole with simple lines made of aluminium, intended to be installed
as an edge protector, ooring separator, countertop nish... It can
be installed with oor or wall tiles between 3 and 30 mm width.
Available in lacquered and anodized trendy nishes or in natural
nish.
Novosuelo/novopared aluminium is a prole made by extrusion of aluminum. Anodizing improves the
corrosion resistance, mechanical resistance and appearance of proles. It has the quality seal Quala-
nod, which guarantees the quality of the process and the resulting proles. This seal regulates several
tests: appearance and color, thickness measurements, sealing and impregnation control, abrasion re-
sistance, lightfastness, acetic saline chamber and nitric acid immersion.
The lacquered nishes have a high quality and homogeneus surface. The lacquering has the quality
seal Qualicoat, which guarantees the quality of the process and the nal products.
The natural nish has no surface treatment so is less resistant to corrosion and scratching. It is not
recommended installing natural nishes without the application of an additional protection.
Aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile,
malleable and highly durable
R03.001_11/01/2012
TECHNICAL FILE
Novosuelo/ Novopared Aluminium
Installation
Page 2 of 3
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the
other side.
2. Place the Novosuelo/Novopared on the corner and press to let the thin-set mortar pass through
the holes of the anchoring wing.Coloque el Novosuelo/Novopared sobre el ángulo y presione para
que el material de agarre pase a través de los agujeros mecanizados del ala de jación.
3. Place tiles along the anchoring wing and then press them softly to get an optimal adhesion.
4. Continue tiling until the installation is nished
5. Clean the possible leftover and let dry.
Walls
Floors
1 2 3 4 5
1
2
3
4 5
Cleaning and maintenance
To visualize the video, capture
this image with your mobile
(QR code reader software is
required) or just click on it.
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Then, place the prole and press it to let the thin-set mortar pass through the holes on the anchoring
wing.
3. Place a tile on the anchoring wing of the prole and press to get an optimal contact with the thin-
set mortar.
4. Repeat the previous step placing tiles along the prole until the installation is nished. Before
curing, tap with a rubber hammer to align the prole with the pavement.
5. Finally clean the leftover material and let dry.
6. * If you are going to polish the ooring, you must install the prole slightly below the tile to avoid possible damages.
To visualize the video, capture
this image with your mobile
(QR code reader software is
required) or just click on it.
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
TECHNICAL FILE
R03.001_11/01/2012
Technical Information
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es.
If you have any query please contact our Technical Department in tecnico@emac.es
The data provided are only for information and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) sales@emac.es // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
Novosuelo/ Novopared Aluminum
Page 3 of 3
Indoors Wall tiling Flooring
-
1
-
2
-
3
dans d''autres langues
- English: Emac NLA11038 User manual
Documents connexes
-
Emac NR10AR1382 Guide d'installation
-
-
-
-
-
-
-
-
Emac NJMF3810 Manuel utilisateur
-