R03.002_22/04/2016
TECHNICAL FILE
Novocanto® Aluminium
Novocanto® Aluminium is a prole with curve section made of
aluminium. This prole has been designed for protection and
decoration of vertical edges of ceramic installations. It is available
in high quality anodized, decorated and lacquered colors and also
in exclusive Sensations range of nishes. Novocanto® Aluminium
has complementary pieces which are available to achieve a perfect
nish.
General features
Material: Aluminium
Length: 2,5 m.l. (8ft2in)
Dimensions:
h: 6, 8, 10, 12, 14 mm.
(1/4, 5/16, 3/8, 1/2, 17/32”)
Packaging: 50 u./box
Finishes:
Natural
Lacquered
Anodized
Marbled
Decorated
Applications
Page 1 of 3
Complementary pieces
These pieces are as a nish between two or three proles in bith horizontal and vertical installations.
Novocanto® Aluminum is a prole intended to protect and decorate edges in wall ceramic installations.
It can also be installed as a medium-height nish.
It is an ideal product for bathrooms, kitchens, medical clinics, restaurants, etc. Its design is versatile
and is appropriate for homes, ofces, public buildings or facilities with strict cleanliness requirements.
Novocanto® Aluminum has a complementary piece made of Zamak to allow the installation of proles
at right angles obtaining a great nish.
Reg. 504253-3
R03.002_22/04/2016
TECHNICAL FILE
Novocanto® Aluminium
Installation
Page 2 of 3
1
2
3 4
5
Materials
Zamak
Technical features and Tests
Alloy: 6063 (AA y ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance: Very good
Lightfastness: Excellent
Appearance and color: EN 12373-1
Aluminum
Novocanto® Aluminum is a prole made by extrusion of aluminum. The bright gold and bright silver
nishes have been anodized, improving mainly by this process their corrosion resistance, mechanical
resistance and appearance. The anodized applied has the quality seal Qualanod, which guarantees the
quality of the process and the resulting proles. This seal regulates several tests: appearance and color,
thickness measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic
saline chamber and nitric acid immersion.
Natural nish has no extra treatment, so it would be necessary to apply a protection to improve its
durability outdoors.
Aluminum is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
The complementary piece of Novocanto® Aluminum is made of Zamak. Zamak is a non ferrous alloy
of Zinc with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high hardness, high
mechanical strength and excellent plastic deformability.
*You can nd out more information by consulting the Technical les of materials in www.emac.es
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the
other side.
2. Place the prole aligned to the corner and press it to let the thin-set mortar pass through the holes
on the anchoring wing.
3. Place tiles along the anchoring wing and continue pressing to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
TECHNICAL FILE
R03.002_22/04/2016
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
Technical information
You can nd out more information about the technical features of the Emac®’s products by downloa-
ding its Technical Files in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Indoors Wall tiling
Novocanto® Aluminium
Page 3 of 3
Cleaning and maintenance
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive. If a preserving agent is applied, as
well as keep a very thin layer of water repellent, note that it can’t be yellow,attract dust or dirt or have
iridescent effects.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
-
1
-
2
-
3
dans d''autres langues
- English: Emac NCA10112 User manual
Documents connexes
-
Emac NEN13516 Mode d'emploi
-
-
-
-
-
-
-
-
-