ZIGBEE RCS3 Manuel utilisateur

Taper
Manuel utilisateur
ISEDC Warning:
This device complies with Innovation, Science, and Economic
Development Canada's licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’ Innovation,
Sciences et Ddveloppement économique Canada applicables aux
appareils radio exempts de licence. Lexploitation est
autorisée aux deux conditions suivantes :
(1) I’appareil nedoit pas produire de brouillage, et
(2) I’utilisateur de I’appareil doit accepter tout
brouillage radioélectri- que subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
The device is compliance with RF exposure guidelines, users
can obtain Canadian information on RF exposure and compliance.
The minimum distance from body to use the device is 20cm.
Le présent appareil est conforme Après examen de ce matériel
aux conformit6 ou aux limites d’inten- sité de champ RF, les
utilisateurs peuvent sur I’exposition aux radiofréquences et
la conformité and compliance d'acquérir les informations
correspondantes. La distance minimale du corps à utiliser le
dispositif est de 20cm.
Download theTreatLife APP
Please scan the QR code or search "Treatlife"on the Apple
APP Store/ Google Play to download the APP.
2. Registration or Log In
● Download the"TreatLife"Application.
● Enter the Register/Login interface;Tap"Register" to create an
account by
entering your Email Address to get verification code and "Set
password". Choose "Log in"if you already have a TreatLife
account.
1. Power the device on and ensure that the mobile phone
has been connected to the network and has successfully
added the smart gateway;
2. Open the Treatlife app, on the “smart Hub” page, click
Add subdevice” button and select “Contact Sensor
on the “Select Device Type” page.
3. Using the reset needle, press and hold reset button for
more than 5s until the network indicator flashes. Add the
device according to the APP instructions.
4. Once added, you can find the device in “My Home” list.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation
. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect
the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
  • Page 1 1

ZIGBEE RCS3 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues