Asus PCE-AC88 Mode d'emploi

Taper
Mode d'emploi
Fast. Easy. Setup!
PCE-AC88 Quick Start Guide
1 2 3
Hardware
installation
Driver
Installation
Connect to
wireless network
Insert the PCE-AC88 network
card into the PCI-E slot, ensuring
that it si completely seated on
the slot.
Turn off your computer, unplug
the power cord, and open the
system cover.
When the setup is completed,
your computer now has Wi-Fi
functionality.
Turn on your computer. Insert the
support CD into the optical drive
or download the driver from:
https://www.asus.com/Networking/PCE-
AC88/HelpDesk_Download/
To install the antennas properly:
1. Install the antennas to the
antenna base.
2. Connect the antenna base to
the PCE-AC88 network card.
Adjust the magnetic antenna base
to get the best signal with your
router.
Double click setup.exe to install
the driver.
InstallShield Wizard
Q11075_PCE-AC88_QSG_3p.indd 1 2016-03-07 17:05:02
Français
1. Installation matérielle
Éteignez votre ordinateur, débranchez le câble d’alimentation et ouvrez le boîtier.
Insérez la carte réseau du PCE-AC88 dans le slot PCI-E jusqu’à ce qu’elle soit bien en place.
2. Installation du pilote
Allumez votre ordinateur. Insérez le CD de support dans le lecteur optique ou téléchargez
le pilote à l’adresse suivante :
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Double-cliquez sur setup.exe pour installer le pilote.
Une fois la conguration terminée, l’ordinateur dispose de la fonction Wi-Fi.
3. Connexion à un réseau sans l
Pour installer les antennes correctement :
1. Installez les antennes sur la base d’antenne.
2. Connectez la base d’antenne à la carte réseau du PCE-AC88.
Ajustez l’antenne magnétique de façon à obtenir la meilleure qualité de signal possible avec
votre routeur.
Deutsch
1. Hardware-Installation
Schalten Sie Ihren Computer aus, ziehen Sie das Netzkabel heraus und öffnen die
Systemabdeckung.
Stecken Sie die PCE-AC88 Netzwerkkarte in den PCI-E Steckplatz, und achten Sie darauf, dass
sie vollständig im Steckplatz sitzt.
2. Treiber-Installation
Schalten Sie Ihren Computer ein. Legen Sie die Support-CD in das optische Laufwerk ein
oder laden den Treiber hier herunter:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Doppelklicken Sie auf setup.exe, um den Treiber zu installieren.
Nachdem die Einrichtung abgeschlossen ist, verfügt Ihr Computer über WLAN-
Funktionalität.
3. Verbindung zum WLAN
So installieren Sie die Antennen richtig:
1. Installieren Sie die Antennen auf dem Antennenfuß.
2. Schließen Sie den Antennenfuß an der PCE-AC88 Netzwerkkarte an.
Richten Sie den Magnetantennenfuß aus, um die beste Verbindung mit Ihrem Router zu erhalten.
Italiano
1. Installazione hardware
Spegni il computer, scollega il cavo di alimentazione e apri la cover del case.
Inserisci la scheda di rete PCE-AC88 nello slot PCIe assicurandoti di installarla correttamente.
2. Installazione dei driver
Accendi il tuo computer. Inserisci il CD di supporto nel drive ottico o scarica i driver da:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Fai doppio click su setup.exe per installare i driver.
Una volta completata l’installazione il tuo computer sarà in grado di connettersi alle reti
Wi-Fi.
3. Connessione alla rete wireless
Per installare le antenne correttamente:
1. Installa le antenne sulla base per le antenne.
2. Collega la base per le antenne alla scheda di rete PCE-AC88.
Regola la base magnetica in modo da ottenere il miglior segnale possibile dal tuo router.
日本
1.
ハードウェアのセットアップ
コンピューターをシャットダウンし、電源コードを抜き、システムカバーを開けます
PCI-Eスロットに本ネットワークカードを挿入し、所定の位置までしっかりセッ
トします
2. ドライバーのインストール
コンピューターを起動します。光学ドライブにサポートCDを挿入する、またはドラ
イバーを次のURLからダウンロードし
ます 。https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
setup.exe」をダブルクリックし、ドライバーをインストールします。
セットアップが完了すれば、コンピューターでWi-Fi接続をお楽しみいただけます。
3. 無線ネットワークへの接続
アンテナの設置
1. アンテナベースにアンテナを取り付けます。
2. 本ネットワークカードにアンテナベースを接続します。
無線信号が効果的に受信できるよう、磁気アンテナベースの位置を調整します。
簡體中文
1. 硬件安裝
關閉您的電腦, 拔下電源, 打開機箱側蓋板。
將 PCE-AC88 網卡插入 PCI-E 插槽, 并確保網卡完全固定於插槽內。
2. 安裝驅動
開啟您的電腦, 將驅動程序與應用程序光盤放入光驅中或從
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/ 下載驅動程
序。
雙擊 setup.exe 來安裝驅動程序。
安裝完成后, 您的電腦已經具備Wi-Fi功能。
3. 連接至無線網絡
正確安裝天線:
1.將天線安裝于天線底座。
2. 將天線底座連接至 PCE-AC88網卡。
調整磁性天線底座以便從您的路由器獲取最佳網絡信號。
繁體中文
1. 硬體安裝
關閉您的電腦, 拔除電源, 移除機殼蓋板。
將 PCE-AC88 網路卡插入 PCI-E 插槽, 並確認網路卡完全固定於插槽內。
2. 安裝驅動程式
開啟您的電腦, 在光碟機中放入驅動程式與公用程式光碟或從 https://www.asus.com/
Networking/PCE-AC88/HelpDesk_Download/ 下載驅動程式。
雙按 setup.exe 以安裝驅動程式。
完成設定後, 您的電腦已經具備了 Wi-Fi 功能。
3. 連接至無線網路
正確安裝天線:
1.將天線安裝於天線基座。
2. 將天線基座連接至 PCE-AC88 網路卡。
調整磁性天線基座以從您的路由器獲得最佳訊號。
Pyccкий
1. Подключение устройства
Выключите компьютер, отсоедините кабель питания и откройте крышку системы.
Вставьте сетевую карту в слот PCI-E, убедитесь, что она полностью вошла в слот.
2. Установка драйвера
Включите компьютер. Вставьте диск в оптический привод или скачайте драйвер с: https://
www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Дважды щелкните setup.exe для установки драйвера.
После завершения установки компьютер может использовать Wi-Fi.
3. Подключение к беспроводной сети
Для правильной установки антенн:
1. Установите антенны на подставку.
2. Подключите подставку к сетевой карте.
Отрегулируйте подставку для получения наилучшего сигнала от роутера.
Português do Brasil
1. Instalação de hardware
Desligue o computador, desconecte o cabo de alimentação e abra a tampa do sistema.
Insira o cartão de rede PCE-AC88 no slot PCI-E, garantindo que ele está completamente
encaixado no slot.
2. Instalação de driver
Ligue seu computador. Insira o CD de suporte na unidade óptica ou baixe o driver de: https://
www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Clique duas vezes em setup.exe para instalar o driver.
Quando a instalação estiver concluída, seu computador agora tem a funcionalidade Wi-Fi.
3. Conectando à rede sem o
Para instalar as antenas corretamente:
1. Instale as antenas na base da antena.
2. Conecte a base da antena na placa de rede PCE-AC88.
Ajuste a base da antena magnética para obter o melhor sinal com seu roteador.
Čeština
1. Instalace hardwaru
Vypněte počítač, odpojte napájecí kabel a otevřete skříň počítače.
Zasuňte síťovou kartu PCE-AC88 zcela do patice PCI-E tak, aby byla usazená.
2. Instalace ovladače
Zapněte počítač. Vložte disk CD do optické jednotky nebo stáhněte ovladač z webu: https://
www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Dvakrát klikněte na soubor setup.exe a nainstalujte ovladač.
Po dokončení instalace je váš počítač vybaven funkcí Wi-Fi.
3. Připojení k bezdrátové síti
Pokyny pro správnou instalaci antén:
1. Nainstalujte antény na anténní podstavec.
2. Připojte anténní podstavec k síťové kartě PCE-AC88.
Upravte magnetický anténní podstavec pro dosažení optimálního signálu se směrovačem.
Suomi
1. Laitteiston asennus
Kytke tietokone pois päältä, irrota virtajohto ja avaa järjestelmän kansi.
Liitä PCE-AC88-verkkokortti PCI-E-paikkaan varmistaen, että se on kokonaisuudessaan
korttipaikan sisällä.
2. Ajurin asennus
Kytke tietokone päälle. Liitä tuki-CD-levy optiseen asemaan tai lataa ajuri osoitteesta: https://
www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Kaksoisnapsauta setup.exe asentaaksesi ajurin.
Kun asetus on valmis, Wi-Fi-toiminnallisuus on käytössä tietokoneessa.
3. Muodosta yhteys langattomaan verkkoon
Antennien asentaminen oikein:
1. Asenna antennit antennialustaan.
2. Liitä antennialusta PCE-AC88-verkkokorttiin.
Säädä magneettista antennin alustaa saadaksesi reitittimelläsi parhaan signaalin.
Ελληνικά
1. Εγκατάσταση υλικού
Απενεργοποιήστε τον υπολογιστή, αποσυνδέστε το καλώδιο τροφοδοσίας και ανοίξτε το
κάλυμμα του συστήματος.
Εισάγετε την κάρτα δικτύου PCE-AC88 στην υποδοχή PCI-E και βεβαιωθείτε ότι είναι
εξολοκλήρου εισηγμένη στην υποδοχή.
2. Εγκατάσταση προγράμματος οδήγησης
Ενεργοποιήστε τον υπολογιστή. Εισάγετε το CD υποστήριξης στη μονάδα οπτικού δίσκου
ή κάντε λήψη του προγράμματος οδήγησης από τη διεύθυνση: https://www.asus.com/
Networking/PCE-AC88/HelpDesk_Download/
Κάντε διπλό κλικ στο setup.exe για να εγκαταστήσετε το πρόγραμμα οδήγησης.
Όταν ολοκληρώσετε την εγκατάσταση, ο υπολογιστής σας διαθέτει πλέον λειτουργικότητα
Wi-Fi.
3. Σύνδεση σε ασύρματο δίκτυο
Για να εγκαταστήσετε σωστά τις κεραίες:
1. Τοποθετήστε τις κεραίες στη βάση κεραίας.
2 .Συνδέστε τη βάση κεραίας στην κάρτα δικτύου PCE-AC88.
Ρυθμίστε τη μαγνητική βάση κεραίας για να λάβετε το καλύτερο δυνατό σήμα με το δρομολογητή
σας.
Magyar
1. Hardvertelepítés
Kapcsolja ki a számítógépét, húzza ki a tápkábelt, és nyissa fel a rendszer burkolatát.
Helyezze be a PCE-AC88 hálózati kártyát a PCI-E nyílásba. Győződjön meg arról, hogy a kártya
megfelelően illeszkedik a nyílásba.
2. Meghajtótelepítés
Kapcsolja be a számítógépét. Helyezze be a támogatási CD-t az optikai meghajtóba, vagy
töltse le a meghajtót a következő címről:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Kattintson duplán a setup.exe fájlra a meghajtó telepítéséhez.
Ha végzett a beállítással, a számítógépen elkezdheti használni a Wi-Fi funkciót.
3. Csatlakozás vezeték nélküli hálózathoz
Az antennák megfelelő beszereléséhez tegye a következőket:
1. Szerelje rá az antennákat az antennatalpra.
2. Csatlakoztassa az antennatalpat a PCE-AC88 hálózati kártyához.
Állítsa be úgy a mágneses antennatalpat, hogy a routeren a jel optimális legyen.
Q11075_PCE-AC88_QSG_3p.indd 2 2016-03-07 17:05:03
한국어
1. 하드웨어 설치
컴퓨터를 끄고 전원 코드를 뽑은 후 시스템 커버를 엽니다.
PCE-AC88 네트워크 카드를 PCI-E 슬롯에 끼우고 카드가 슬롯에 완전히 끼워졌는지
확인합니다.
2. 드라이버 설치
컴퓨터를 켭니다. 지원 CD를 광 드라이브에 넣거나 다음 웹사이트에서 드라이버를
다운로드하십시오.
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
setup.exe를 두 번 클릭하여 드라이버를 설치합니다.
설치가 완료되면 이제 컴퓨터에서 Wi-Fi 기능을 사용할 수 있습니다.
3. 무선 네트워크에 연결하기
안테나를 제대로 설치하는 방법:
1. 안테나를 안테나 베이스에 설치합니다.
2. 안테나 베이스를 PCE-AC88 네트워크 카드에 연결합니다.
라우터에서 최상의 신호를 수신하도록 자석 안테나 베이스를 조정하십시오.
Bahasa Malayu
1. Pemasangan perkakasan
Matikan komputer anda, cabut palam kord kuasa dan buka penutup sistem.
Masukkan kad rangkaian PCE-AC88 ke dalam slot PCI-E, memastikan bahawa ditempatkan
sepenuhnya pada slot.
2. Pemasangan Pemacu
Hidupkan komputer anda. Masukkan CD sokongan ke dalam pemacu optikal atau muat
turun pemacu daripada:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Klik dua kali setup.exe untuk memasang pemacu.
Apabila persediaan lengkap, komputer anda kini mempunyai kefungsian Wi-Fi.
3. Sambung ke rangkaian wayarles
Untuk memasang antena dengan betul:
1. Pasang antena ke tapak antena.
2. Sambungkan tapak antena ke kad rangkaian PCE-AC88.
Laraskan tapak antena magnetik untuk mendapatkan isyarat terbaik dengan penghala anda.
Português
1. Instalação do hardware
Desligue o computador, desligue o cabo de alimentação e abra a tampa do sistema.
Insira a placa de rede PCE-AC88 na ranhura PCI-E, certicando-se de que a mesma ca bem
encaixada na ranhura.
2. Instalação dos controladores
Ligue o computador. Insira o CD de suporte na unidade ótica ou transra o controlador a
partir de: https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Clique duas vezes em setup.exe para instalar o controlador.
Quando a conguração for concluída, o seu computador possuirá funcionalidade de Wi-Fi.
3. Ligar a uma rede sem os
Para instalar corretamente as antenas:
1. Instale as antenas na respetiva base.
2. Ligue a base da antena à placa de rede PCE-AC88.
Ajuste a base da antena magnética para obter o melhor sinal do seu router.
Polski
1. Instalacja sprzętu
Wyłącz komputer, odłącz przewód zasilający i otwórz pokrywę układu.
Włóż kartę sieciową PCE-AC88 do gniazda PCI-E, upewniając się, że została ona prawidłowo
osadzona w gnieździe..
2. Instalacja sterownika
Włącz komputer. Włóż płytę CD z oprogramowaniem do napędu optycznego lub pobierz
sterownik z:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Kliknij dwukrotnie setup.exe w celu instalacji sterownika.
Po zakończeniu instalacji komputer posiada funkcjonalność sieci Wi-Fi.
3. Podłączenie do sieci bezprzewodowej
Prawidłowa instalacja anten:
1. Zamontuj anteny na podstawie anten.
2. Połącz podstawę anten z kartą sieciową PCE-AC88.
Ustaw magnetyczną podstawkę anteny tak, aby uzyskać najlepszy sygnał z routera.
Română
1. Instalarea hardware-ului
Opriţi computerul, deconectaţi cablul de alimentare şi deschideţi capacul sistemului.
Introduceţi placa de reţea PCE-AC88 în fanta PCI-E, asigurându-vă că este complet xată
în aceasta.
2. Instalarea driverului
Porniţi computerul. Introduceţi CD-ul de instalare în unitatea optică sau descărcaţi
driverul de pe:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Faceţi dublu clic pe setup.exe pentru a instala driverul.
După nalizarea congurării, computerul dvs. va dispune de funcţionalitatea Wi-Fi.
3. Conectarea la o reţea fără r
Pentru a instala antenele în mod corect:
1. Instalaţi antenele la baza pentru antenă.
2. Conectaţi baza antenei la placa de reţea PCE-AC88.
Reglaţi baza magnetică pentru antenă pentru a benecia de cel mai bun semnal la folosirea
routerului.
Español
1. Instalación del hardware
¡Apague su PC, desenchufe el cable de alimentación y abra la tapa del sistema.
Inserte la tarjeta de red PCE-AC88 en la ranura PCI-E, asegurándose de que está
completamente asentada en dicha ranura.
2. Instalación del controlador
Encienda su PC. Inserte el CD de soporte en la unidad óptica o descargue el controlador de: https://
www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Haga doble clic en el archivo setup.exe para instalar el controlador.
Cuando la conguración se complete, su PC dispondrá de funcionalidad Wi-Fi.
3. Conectarse a una red inalámbrica
Para instalar las antenas correctamente:
1. Instale las antenas en la base de antenas.
2. Conecte la base de antenas a la tarjeta de red PCE-AC88.
Ajuste la base de antenas magnética para obtener la mejor señal con el router.
Svenska
1. Installation av hårdvara
Stäng av datorn, dra ur strömsladden och öppna systemkåpan.
Sätt i nätverkskort PCE-AC88 i PCI-E-platsen och se till att det sitter ordentligt på kortplatsen.
2. Installation av drivrutin
Starta datorn. Sätt i support-CD:n i den optiska enheten eller ladda ner drivrutinen från:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Dubbelklicka på setup.exe för att installera drivrutinen.
När installationen är klar har datorn Wi-Fi-funktionalitet.
3. Anslut till trådlöst nätverk
Så här installerar du antennerna korrekt:
1. Fäst antennerna på antennbasen.
2. Anslut antennbasen till nätverkskort PCE-AC88.
Justera den magnetiska antennbasen för att få den bästa signalen med din router.
ไทย
1. การติดตั้งฮาร์ดแวร์
ปิดคอมพิวเตอร์ ถอดปลั๊กไฟออก และเปิดฝาครอบระบบ
ใส่การ์ดเครือข่าย PCE-AC88 เข้าไปในช่องเสียบ PCI-E ให้แน่ใจว่าใส่การ์ดเข้า ไปในช่อง
เสียบเรียบร้อยแล้ว
2. การติดตั้งไดรเวอร
เปิดคอมพิวเตอร์ ใส่แผ่น CD ที่รองรับเข้าไป ในออฟติคอลไดรฟ์หรือ ดาวน์โหลดไดรเวอร์
จาก: https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
คลิกสองครั้งที่ setup.exe เพื่อติดตั้งไดรเวอร์
เมื่อตั้งค่าเสร็จแล้ว คอมพิวเตอร์ของคุณมีฟังก์ชัน Wi-Fi แล้วตอนนี้
3. เชื่อมต่อเครือข่ายไร้สาย
ในการติดตั้งเสาอากาศอย่างถูกต้อง:
1. ติดตั้งเสาอากาศเข้ากับฐาน
2. เชื่อมต่อฐานเสา อากาศเข้ากับการ์ดเครือข่าย PCE-AC88
ปรับฐานเสาอากาศ แม่เหล็กเพื่อรับสัญญาณ ที่ดีที่สุดด้วยเราเตอร์ของคุณ
rkçe
1. Donanım kurulumu
Bilgisayarınızı kapatın, güç kablosunu çıkarın ve sistem kapağını açın.
PCE-AC88 ağ kartını, yuvaya tamamen oturduğundan emin olarak PCI-E yuvasına takın.
2. Sürücü yükleme
Bilgisayarınızı açın. Destek CD’sini optik sürücüye yerleştirin veya sürücüyü şu adresten
indirin: https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Sürücüyü yüklemek için setup.exe dosyasına çift tıklayın.
Kurulum tamamlandığında bilgisayarınız Wi-Fi işlevine sahip olur.
3. Kablosuz ağa bağlan
Antenleri düzgün biçimde takmak için:
1. Antenleri anten tabanına takın.
2. Anten tabanını PCE-AC88 ağ kartına bağlayın.
Yönlendiricinizle en iyi sinyali almak için manyetik anten tabanını ayarlayın.
Tiếng Việt
1. Lắp đặt phần cứng
Tắt máy tính, ngắt dây nguồn và mở nắp vỏ hệ thống.
Lắp card mạng PCE-AC88 vào khe cắm PCI-E, đảm bảo card được lắp chặt vào khe.
2. Cài đặt driver
Bật lại máy tính. Lắp đĩa CD hỗ trợ vào ổ đĩa quang hoặc tải driver về từ:
https://www.asus.com/Networking/PCE-AC88/HelpDesk_Download/
Nhấp đôi setup.exe để cài đặt.
Khi thiết lập xong, máy tính của bạn sẽ có chức năng Wi-Fi.
3. Kết nối mạng không dây
Để lắp đặt các ăng ten thích hợp:
1. Lắp các ăng ten vào đế ăng ten.
2. Kết nối đế ăng ten với card mạng PCE-AC88.
Điều chỉnh đế ăng ten từ tính để thu tín hiệu tốt nhất bằng router của bạn.
ىسراف
1

PCI-EPCE-AC88

2

/


3

1
PCE-AC882

Q11075_PCE-AC88_QSG_3p.indd 3 2016-03-07 17:05:03
Networks Global Hotline Information
Region Country Hotline Number Service Hours
Europe
Cyprus 800-92491 09:00-13:00 ;
14:00-18:00 Mon-Fri
France 0033-170949400 09:00-18:00 Mon-Fri
Germany
0049-1805010920
09:00-18:00 Mon-Fri
10:00-17:00 Mon-Fri
0049-1805010923
(component support )
0049-2102959911 (Fax)
Hungary 0036-15054561 09:00-17:30 Mon-Fri
Italy 199-400089 09:00-13:00 ;
14:00-18:00 Mon-Fri
Greece 00800-44142044 09:00-13:00 ;
14:00-18:00 Mon-Fri
Austria 0043-820240513 09:00-18:00 Mon-Fri
Netherlands/
Luxembourg 0031-591570290 09:00-17:00 Mon-Fri
Belgium 0032-78150231 09:00-17:00 Mon-Fri
Norway 0047-2316-2682 09:00-18:00 Mon-Fri
Sweden 0046-858769407 09:00-18:00 Mon-Fri
Finland 00358-969379690 10:00-19:00 Mon-Fri
Denmark 0045-38322943 09:00-18:00 Mon-Fri
Poland 0048-225718040 08:30-17:30 Mon-Fri
Spain 0034-902889688 09:00-18:00 Mon-Fri
Portugal 00351-707500310 09:00-18:00 Mon-Fri
Slovak Republic 00421-232162621 08:00-17:00 Mon-Fri
Czech Republic 00420-596766888 08:00-17:00 Mon-Fri
Switzerland-German 0041-848111010 09:00-18:00 Mon-Fri
Switzerland-French 0041-848111014 09:00-18:00 Mon-Fri
Switzerland-Italian 0041-848111012 09:00-18:00 Mon-Fri
United Kingdom 0044-1442265548 09:00-17:00 Mon-Fri
Ireland 0035-31890719918 09:00-17:00 Mon-Fri
Russia and CIS 008-800-100-ASUS 09:00-18:00 Mon-Fri
Ukraine 0038-0445457727 09:00-18:00 Mon-Fri
Region Country Hotline Numbers Service Hours
Asia-Pacic
Australia 1300-278788 09:00-18:00 Mon-Fri
New Zealand 0800-278788 09:00-18:00 Mon-Fri
Japan 0800-1232787 09:00-18:00 Mon-Fri
09:00-17:00 Sat-Sun
0081-570783886
( Non-Toll Free )
09:00-18:00 Mon-Fri
09:00-17:00 Sat-Sun
Korea 0082-215666868 09:30-17:00 Mon-Fri
Thailand 0066-24011717 09:00-18:00 Mon-Fri
1800-8525201
Singapore 0065-64157917 11:00-19:00 Mon-Fri
0065-67203835 11:00-19:00 Mon-Fri
(Repair Status Only) 11:00-13:00 Sat
Malaysia 0060-320535077 10:00-19:00 Mon-Fri
Philippine 1800-18550163 09:00-18:00 Mon-Fri
India 1800-2090365 09:00-18:00 Mon-Sat
India(WL/NW) 09:00-21:00 Mon-Sun
Indonesia 0062-2129495000 09:30-17:00 Mon-Fri
500128 (Local Only) 9:30 – 12:00 Sat
Vietnam 1900-555581 08:00-12:00
13:30-17:30 Mon-Sat
Hong Kong 00852-35824770 10:00-19:00 Mon-Sat
Americas
USA 1-812-282-2787 8:30-12:00 EST Mon-Fri
Canada 9:00-18:00 EST Sat-Sun
Mexico 001-8008367847 08:00-20:00 CST Mon-Fri
08:00-15:00 CST Sat
Networks Global Hotline Information
Q11075_PCE-AC88_QSG_3p.indd 4 2016-03-07 17:05:03
Middle East
+ Africa
Egypt 800-2787349 09:00-18:00 Sun-Thu
Saudi Arabia 800-1212787 09:00-18:00 Sat-Wed
UAE 00971-42958941 09:00-18:00 Sun-Thu
Turkey 0090-2165243000 09:00-18:00 Mon-Fri
South Africa 0861-278772 08:00-17:00 Mon-Fri
Israel *6557/00972-39142800 08:00-17:00 Sun-Thu
*9770/00972-35598555 08:30-17:30 Sun-Thu
Balkan
Countries
Romania 0040-213301786 09:00-18:30 Mon-Fri
Bosnia
Herzegovina 00387-33773163 09:00-17:00 Mon-Fri
Bulgaria 00359-70014411 09:30-18:30 Mon-Fri
00359-29889170 09:30-18:00 Mon-Fri
Croatia 00385-16401111 09:00-17:00 Mon-Fri
Montenegro 00382-20608251 09:00-17:00 Mon-Fri
Serbia 00381-112070677 09:00-17:00 Mon-Fri
Slovenia 00368-59045400 08:00-16:00 Mon-Fri
00368-59045401
Estonia 00372-6671796 09:00-18:00 Mon-Fri
Latvia 00371-67408838 09:00-18:00 Mon-Fri
Lithuania-Kaunas 00370-37329000 09:00-18:00 Mon-Fri
Lithuania-Vilnius 00370-522101160 09:00-18:00 Mon-Fri
Networks Global Hotline Information
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• Thisdevicemaynotcauseharmfulinterference.
• Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
NOTES:
• UK support E-mail network_suppor[email protected]
• Formoreinformation,visittheASUSsupportsiteat http://support.asus.com
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiveris
connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
CAUTION: Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Operate the device in 5150-5250MHz frequency band for indoor use only.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
WARNING
Any changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. Prohibition of Co-location. This device and its
antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Users must not modify this device. Modication by anyone other than the party responsible for
compliance with the rules of the Federal Communications Commission (FCC) may void the authority
granted under FCC regulations to operate this device. This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. SAR test distance is 5 mm.
Q11075_PCE-AC88_QSG_3p.indd 5 2016-03-07 17:05:04
低功率電波輻射性電機管理辦法
(1)「經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自
變更頻率、加大功率或變更原設計之特性及功能」以及(2)「低功率射頻電機之使用不
得影響飛航安全及干擾合法通信經發現有干擾現象時,應立即停用,並改善至無干
擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻
電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾」
在5.25-5.35GHz 頻帶內操作之無線資訊傳輸設備,限於室內使用。
IC Warning Statement
This radio transmitter(IC: 3568A-USBR700) has been approved by Industry Canada to operate
with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use with this
device.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment.
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Article 14
The application of lower power frequency electric machineries shall not aect the navigation safety
nor interfere a legal communication, if an interference is found, the service will be suspended until
improvement is made and the interference no longer exists.
VCCI: Japan Compliance Statement
Class B ITE
CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference, in which
case the user may be required to take adequate measures.
Operation Channels: Ch1~11 for N. America, Ch1~14 Japan, Ch1~13 Europe (ETSI)
This equipment may be operated in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LU, MT, NL, PL, PT, SK,
SL, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR.
Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection
requirements for health and safety – Article 3.1a
Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant
and sucient.
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been
conducted. These are considered relevant and sucient.
Eective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 328 & EN 301 893 have been conducted. These are
considered relevant and sucient. The operation frequency of the device is in the 5150-5250 MHz band
is for indoor use only. The SAR test distance is 5mm.
NCC Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or
change the characteristic and functions of the original design of the certied lower power frequency
electric machinery.
Japan RF Equipment Statement
屋外での使用について
本製品は、5GHz 帯域での通信に対応しています。電波法の定めにより5.2GHz、5.3GHz
帯域の電波は屋外で使用が禁じられています。
法律および規制遵守
本製品は電波法及びこれに基づく命令の定めるところに従い使用してください。日本
国外では、その国の法律または規制により、本製品を使用ができないことがあります。
このような国では、本製品を運用した結果、罰せられることがありますが、当社は一切
責任を負いかねますのでご了承ください。
Q11075_PCE-AC88_QSG_3p.indd 6 2016-03-07 17:05:04
Canada, avis d’Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer
d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuvent aecter son fonctionnement.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans l Dell est inférieure à la limite d’exposition aux
fréquences radio d’Industry Canada (IC). Utilisez l’appareil de sans l Dell de façon à minimiser les
contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specic Absorption Rate –
Taux d’absorption spécique) d’IC lorsqu’il est installé dans des produits hôtes particuliers qui
fonctionnent dans des conditions d’exposition à des appareils portables. Ce périphérique est
homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant à l’appareil dans la
liste d’équipement radio (REL - Radio Equipment List) d’Industry Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendezvous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer
d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuvent aecter son fonctionnement.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans l ASUS est inférieure à la limite d’exposition aux
fréquences radio d’Industry Canada (IC). Utilisez l’appareil de sans l ASUS de façon à minimiser les
contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specic Absorption Rate
Taux d’absorption spécique) d’IC lorsqu’il est installé dans des produits hôtes particuliers qui
fonctionnent dans des conditions d’exposition à des appareils portables. Ce périphérique est
homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant à l’appareil dans la
liste d’équipement radio (REL - Radio Equipment List) d’Industry Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction
of Chemicals) regulatory framework, we published the chemical substances in our
products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
Manufacturer
ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN
Authorised representative in Europe
ASUS Computer GmbH
Address: HARKORT STR. 21-23, D-40880 RATINGEN, DEUTSCHLAND
Authorised distributors in Turkey
BOGAZICI BIL GISAYAR SAN. VE TIC. A.S.
Tel: +90 212 3311000
Address: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10 AYAZAGA/ISTANBUL
CIZGI Elektronik San. Tic. Ltd. Sti.
Tel: +90 212 3567070
Address: CEMAL SURURI CD. HALIM MERIC IS MERKEZI
No: 15/C D:5-6 34394 MECIDIYEKOY/ISTANBUL
KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE DIS TIC. A.S.
Tel: +90 216 5288888
Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi, SANCAKTEPE ISTANBUL
AEEE Yönetmeliğine Uygundur.
WARNING! This product may contain chemicals known to the States of
California to cause cancer and harm. Wash hands after handling.
Q11075_PCE-AC88_QSG_3p.indd 7 2016-03-07 17:05:04
EU Declaration of Conformity
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
Address:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
declare the following apparatus:
Product name :
Dual Band 4x4 802.11ac PCI-E Adapter
Model name :
PCE-AC88
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
EMC Directive 2004/108/EC (until April 19th, 2016) and Directive 2014/30/EU (from April 20th, 2016)
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE Directive 1999/5/EC
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LVD Directive 2006/95/EC (until April 19th, 2016) and Directive 2014/35/EU (from April 20th, 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign Directive 2009/125/EC
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS Directive 2011/65/EU Ver. 160217
CE marking
Equipment Class 2
Signature
Jerry Shen
Printed Name
CEO
Position
Taipei, Taiwan
Place of issue
4/3/2016
Date of issue
2016
Year CE marking was first affixed
EU Konformitätserklärung
Hiermit erklären wir,
Hersteller:
ASUSTeK COMPUTER INC.
Anschrift:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Bevollmächtigter:
ASUS COMPUTER GmbH
Anschrift des Bevollmächtigten:
HARKORT STR. 21-23, 40880 RATINGEN
Land:
GERMANY
dass nachstehend bezeichnete Produkte
Produktbezeichnung
Dual Band 4x4 802.11ac PCI-E Adapter
Modellbezeichnung:
PCE-AC88
mit den nachstehend angegebenen, für das Produkt geltenden Richtlinien/Bestimmungen übereinstimmen:
EMV Richtlinie 2004/108/EG (bis 19. April 2016) und Richtlinie 2014/30/EU (ab 20. April 2016)
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE Richtlinie 1999/5/EG
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LVD Richtlinie 2006/95/EG (bis 19. April 2016) und Richtlinie 2014/35/EU (ab 20. April 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ökodesign Richtlinie 2009/125/EG
Verordnung (EG) No. 1275/2008
Verordnung (EG) No. 642/2009
Verordnung (EG) No. 278/2009
Verordnung (EU) No. 617/2013
RoHS Richtlinie 2011 / 65/EU Ver. 160217
CE Kennzeichen
Geräteklasse 2
Unterschrift
Jerry Shen
Name
CEO
Position
Taipei, Taiwan
Ort
4/3/2016
Datum
2016
Jahr der Kennzeichenvergabe
(EU Konformitätszeichen)
UE Declaración de Conformidad
Nosotros, los abajo firmantes,
Fabricante:
ASUSTeK COMPUTER INC.
Dirección:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Representante autorizado en Europa:
ASUS COMPUTER GmbH
Dirección, Ciudad:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
Declaramos el siguiente producto:
Nombre del aparato :
Dual Band 4x4 802.11ac PCI-E Adapter
Nombre del modelo :
PCE-AC88
El objeto de la declaración descrita anteriormente es conforme con la legislación de armonización pertinente de la Unión:
EMC Directiva 2004/108/CE (hasta el 19 de abril, 2016) y Directiva 2014/30/UE (desde el 20 de abril, 2016)
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE Directiva 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LVD Directiva 2006/95/CE (hasta el 19 de abril, 2016) y Directiva 2014/35/UE (desde el 20 de abril, 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Diseño Ecológico Directiva 2009/125/CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS Directiva 2011/65/UE Ver. 160217
Marcado CE
Clase de equipo 2
Firma
Jerry Shen
Nombre impreso
CEO
Posición
Taipei, Taiwan
Lugar de emisión
4/3/2016
Fecha de emisión
2016
Año en que se colocó
el marcado CE por primera vez
(Marcado CE de comformidad)
DECLARATION UE DE CONFORMITE
Nous, soussignés
Fabricant:
ASUSTeK COMPUTER INC.
Adresse:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Représentant autorisé en Europe:
ASUS COMPUTER GmbH
Adresse, ville:
HARKORT STR. 21-23, 40880 RATINGEN
Pays:
GERMANY
Déclarons l’appareil suivant:
Nom du produit :
Dual Band 4x4 802.11ac PCI-E Adapter
Nom du modèle :
PCE-AC88
L’objet de la déclaration décrit ci-dessus est conforme avec la législation d’harmonisation de l’Union applicable
Directive CEM 2004/108/CE (jusqu’au 19 avril 2016) et la directive 2014/30/UE (à partir du 20 avril 2016)
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
Directive R&TTE 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
Directive LVD 2006//125/CE (jusqu’au 19 avril 2016) et la directive 2014/34/UE (à partir du 20 avril 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Directive écoconception 2009/125/CE
Regulation (CE) No. 1275/2008
Regulation (CE) No. 642/2009
Regulation (CE) No. 278/2009
Regulation (UE) No. 617/2013
Directive RoHS 2011/65/UE Ver. 160217
Marquage CE
Equipement de classe 2
Signature
Jerry Shen
Nom en caractères d’imprimerie
CEO
Position
Taipei, Taiwan
Lieu de délivrance
4/3/2016
Date d'Emission
2016
Année où commence l’apposition
du marquage CE
(Marquage UE de conformité)
Declaração CE de Conformidade
Nós, os abaixo-assinados,
Fabricante:
ASUSTeK COMPUTER INC.
Endereço:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Representante autorizado na Europa:
ASUS COMPUTER GmbH
Endereço, cidade:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
declaramos o seguinte aparelho:
Nome do produto:
Dual Band 4x4 802.11ac PCI-E Adapter
Nome do modelo:
PCE-AC88
O objeto da declaração acima descrito está em conformidade com a legislação de harmonização da União aplicável:
EMC Diretiva 2004/108/CE (até 19 de abril de 2016) e Diretiva 2014/30/UE (a partir de 20 de abril de 2016)
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE Diretiva 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LVD Diretiva 2006/95/CE (até 19 de abril de 2016) and Diretiva 2014/35/UE (a partir de 20 de abril de 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
EcoEcodesign Diretiva 2009/125/CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS Diretiva 2011/65/UE Ver. 160217
Marcação CE
Classe de equipamento 2
Assinatura
Jerry Shen
Nome impresso
CEO
Posição
Taipei, Taiwan
Local de emissão
4/3/2016
Data de emissão
2016
Ano marcação CE foi aposta por primeira vez
(Marcação CE de conformidade)
Declaraţie de conformitate UE
Subsemnatul,
Producător :
ASUSTeK COMPUTER INC.
Adresă:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Reprezentant autorizat în Europa:
ASUS COMPUTER GmbH
Adresă, Oraş:
HARKORT STR. 21-23, 40880 RATINGEN
Ţară:
GERMANIA
declară următorul aparat:
Nume Produs :
Dual Band 4x4 802.11ac PCI-E Adapter
Nume Model :
PCE-AC88
Obiectul declarației descris mai sus este în conformitate cu legislația relevantă de armonizare a Uniunii :
CEM Directiva 2004/108/CE (până în 19 Aprilie 2016) şi Directiva 2014/30/UE (până în 20 Aprilie 2016)
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE Directiva 1999/5/CE
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LV D Directiva 2006/95/CE (până în 19 Aprilie 2016) şi Directiva 2014/35/UE (până în 20 Aprilie 2016)
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign Directiva 2009/125/CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS Directiva 2011/65/UE Ver. 160217
Marcajul CE
Echipament Clasa 2
Semnătură
Jerry Shen
Nume
CEO
Funcţie
Taipei, Taiwan
Locul emiterii
4/3/2016
Data emiterii
2016
Anul în care Marcajul CE a fost aplicat pentru
prima oară
(Marcaj de conformitate UE )
EU Uygunluk Beyanı
Biz, bu imza altındakiler
Üretici:
ASUSTeK COMPUTER INC.
Adres:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Avrupa’daki Yetkili:
ASUS COMPUTER GmbH
Adres, Şehir:
HARKORT STR. 21-23, 40880 RATINGEN
Ülke:
ALMANYA
Aşağıdaki ürünleri beyan ediyoruz :
Ürün adı :
Dual Band 4x4 802.11ac PCI-E Adapter
Model adı :
PCE-AC88
Yukarıda belirtilen beyanın konusu birlik yasalarına göre uygundur:
EMC Direktif 2004/108/EC 19 Nisan 2016’ya kadar ve Direktif 2014/30/EU 20 Nisan 2016
EN 55022:2010/AC:2011, Class B
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE Direktifi 1999/5/EC
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-12)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LVD Direktifi 2006/95/19 Nisan 2016’ya kadar ve Direktif 2014/35/EU 20 Nisan 2016
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign Direktif 2009/125/EC
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS Direktifi 2011/65/EU Ver. 160217
CE işareti
Ekipman Sınıfı 2
İmza
Jerry Shen
Basılı Ad
CEO
Pozisyonu
Taipei, Taiwan
Sürüm yeri
4/3/2016
Sürüm tarihi
2016
CE işaretinin ilk eklendiği yıl
AEEE Yönetmeliğine Uygundur
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter
except in accordance with FCC multi-transmitter product procedures.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the radiator & your body.
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection
d'autres canaux n'est pas possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter
except in accordance with IC multi-transmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou
transmetteur.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still
complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer à la limite de
p.i.r.e. spéciée pour l’exploitation point à point et non point à point, selon le cas.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This radio transmitter (IC: 3568A-PCIE0U00) has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
Le présent émetteur radio (IC: 3568A-PCIE0U00) a été approuvé par Industrie Canada pour fonctionner avec les types
d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les
types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits
pour l'exploitation de l'émetteur.
Antenna list:
Set Brand P/N Type Connector Gain (dBi)
2.4GHz 5GHz Band 1 5GHz Band 4
1 WHA YU C660-510336-A
( SRF20141892 ) Dipole Reversed-SMA 1.86 1.97 1.95
Set Loss of Cable (dB) True Gain (dBi)
2.4GHz 5GHz Band 1 5GHz Band 4 2.4GHz 5GHz Band 1 5GHz Band 4
1 1.70 2.80 2.80 0.16 -0.83 -0.85
NCC Statement:
(1)經型式認證合格之低功率射頻電機非經許可公司商號或使用者均不得擅自變更頻率加大功率或變更原
設計之特性及功能」。
(2)低功率射頻電機之使用不得影響飛航安全及干擾合法通信經發現有干擾現象時應立即停用並改善至無干
擾時方得繼續使用前項合法通信指依電信法規定作業之無線電通信低功率射頻電機須忍受合法通信或工
科學及醫療用電波輻射性電機設備之干擾」。
CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the radiator & your body.
This equipment may be operated in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LU, MT, NL, PL, PT, SK, SL, ES, SE,
GB, IS, IS, LI, NO, CH, BG, RO, TR.
1506-0GFM000
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Asus PCE-AC88 Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues