Honeywell Home TH6320ZW2003/U Le manuel du propriétaire

T6 Pro Z-Wave

Programmable Thermostat

TH6320ZW2003

User Guide

*TH6320ZW2003 depicted. Other models may vary.

Actual size 4.09'' x 4.09'' x 1.06''

PM

Menu FanMode

Fan

Auto

Mode

Heat

Wake Away HomeSleep

Following Schedule

ProSeries

This user guide is designed to help you get acquainted with your new T6 Pro ZWave

thermostat. Check out the table of contents on page 2 to browse by topic.

Welcome

Web: Resideo.com

Phone: 18004681502

Social: Twitter: @Honeywell_Home, Facebook: Honeywell Home

Need help? Get in touch.

Read before installing

2

Table of contents

Thermostat features ................................................................................................................ 3

Thermostat overview ............................................................................................................... 4

Basic thermostat operation

Adjusting the temperature ....................................................................................................................4

Program schedule overrides .................................................................................................................5

Adjusting the temperature in Auto mode ......................................................................................6

Selecting system mode ........................................................................................................................... 7

Built-in compressor protection ...........................................................................................................8

Setting the fan .............................................................................................................................................8

Main menu settings

ZWave setup ................................................................................................................................................ 9

ZWave connection status ..................................................................................................................... 10

Main menu overview .................................................................................................................................11

Scheduling options ...................................................................................................................................12

Setting a schedule ..................................................................................................................................... 14

Reset schedule ............................................................................................................................................15

Screen lock settings ..................................................................................................................................15

Adjusting backlight brightness ...........................................................................................................16

Enabling/disabling Adaptive Intelligent Recovery .................................................................... 17

Setting the time and date ......................................................................................................................17

Cleaning the thermostat screen ......................................................................................................... 18

Choosing Fahrenheit or Celsius .........................................................................................................18

Viewing equipment status .....................................................................................................................19

Viewing thermostat information ......................................................................................................... 19

Battery replacement .................................................................................................................................20

Alerts and maintenance reminders ................................................................................... 21

Appendices

Troubleshooting .......................................................................................................................................... 23

5-year warranty............................................................................................................................................24

General system information .................................................................................................................25

Regulatory information ...........................................................................................................................25

3

Thermostat features

The Honeywell Home T6 Pro ZWave Programmable Thermostat is a ZWave Plus

certified thermostat designed to work with any ZWave compliant controller or gateway

for easy programming and automation to deliver energy savings and comfort at the

same time. The thermostat can be operated in any ZWave network together with other

ZWave certified devices from other manufacturers. All non-battery operated ZWave

devices (nodes) within the network will act as repeaters regardless of manufacturer

to increase reliability of the network. When integrated with the app that controls your

ZWave controller, it lets you program and control your home’s HVAC system as well as

control other ZWave devices connected to the same ZWave controller.

Flexible scheduling: The thermostat is fully programmable when not included into

a ZWave network. Each day can be programmed for different heating and cooling

settings in 4 unique periods (Wake, Away, Home, Sleep). The thermostat scheduling

options available differ depending on whether the thermostat is included or excluded

from ZWave network, on capability of your ZWave controller and app to program

thermostat.

Displays ambient air temperature, % relative indoor humidity and reports HVAC

system status: You can display actual temperature or % relative humidity, or to see

whether your cooling / heating system is running.

Auto change from heat to cool: When Auto mode is selected, the T6 Pro ZWave

thermostat can automatically determine whether your home needs heating or cooling

to reach the desired temperature at the right time.

Smart Alerts: The T6 Pro ZWave thermostat can alert you when your HVAC system is

not working properly and can remind you for things like when to change your furnace

filter.

Adaptive Intelligent Recovery: The T6 Pro ZWave thermostat learns your heating

and cooling cycle times to make sure the system delivers the temperature you want,

when you want it. (Available only if the local thermostat schedule is enabled.)

Power method: Designed for battery operation (3 x AA batteries) or for 24 VAC power

operation (via a “C” or common wire).

4

Mode

Touch to select system mode:

• Auto (if enabled)

• Heat

• Cool

• Off

• Em Heat (Emergency Heat

if installed and configured)

Menu

Touch to program a schedule

and see other customizable

options.

Fan

Touch to select fan mode:

• Auto

• On

• Circulate

Desired temperature

Shows desired indoor

temperature.

Indoor Temperature/

% Relative Indoor

Humidity

Touch to display

either indoor

temperature or

% relative indoor

humidity.

ZWave connection

status

Shows ZWave

connection status.

Adjust temperature

Touch or to

set your desired

temperature.

PM

Menu FanMode

Fan

Auto

Mode

Heat

Thermostat overview

Adjusting the temperature

To adjust the desired temperature up or down,

touch or on the thermostat home screen.

How long the change will be held depends on

whether your thermostat is included or excluded

in ZWave network and what schedule type is

selected. For more information, see "Scheduling

options" on page 12.

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHomeSleep

Following Schedule

5

Program schedule overrides

AM

Heat On

Hold Until

Menu FanMode

Fan

Auto

Mode

Heat

AM

Hold UntilPermanent Hold

Run Schedule

Back

AM

Heat On

Hold Until

Menu FanMode

Fan

Auto

Mode

Heat

AM

Hold UntilPermanent Hold

Run Schedule

Back

If the thermostat is included in ZWave network it typically follows the setting on your

ZWave controller. If you adjust the temperature setting, it overrides the current setting

until new state (eg. Home/Away) and/or the new temperature setting is received from

ZWave controller. Setting of Hold until time and Permanent hold (see below) will not

be available on the thermostat screen at this time.

There are several scheduling options available for the thermostat. For more

information, see "Scheduling options" on page 12.

If the thermostat is not included in ZWave network and the thermostat is following

local time based schedule only, you can set what time the new temperature setting will

be held until or you can hold the new temperature setting permanently.

Program schedule override (temporary)

1 Touch or on the thermostat home

screen to set your desired temperature. Hold

Until will appear together with the time the

hold will end.

2 To change when the hold will end, touch Hold

Until and wait until the time starts blinking.

Then, touch or to set when you want

the hold to end. Touch Hold Until once more

to conﬁrm changes and return to the home

screen.

After the hold period ends, the thermostat will

automatically return to the program schedule. If

you want to cancel the hold, touch Hold Until and

then touch Run Schedule.

Program schedule override

(permanent)

1 Touch or on the thermostat home

screen to reach your desired temperature.

Hold Until will appear together with the time

you want the hold to end.

2 Touch Hold Until. Permanent Hold will appear

on screen. Touch Permanent Hold to hold this

temperature until you manually change it.

To end permanent hold and return to the

program schedule, touch Permanent Hold and then

touch Run Schedule.

6

Auto mode (when the thermostat automatically chooses heating or cooling to

reach your desired temperature) is disabled by default. If your heating or cooling

professional enabled it, you’ll see Auto appear as an option under Mode on the

thermostat home screen.

To choose your preferred temperatures for both heating and cooling in Auto mode,

follow the steps below.

Adjusting the temperature in Auto mode

1 Touch Mode on the thermostat home screen

until Auto appears. Then touch or to

choose your preferred temperature setting

for the mode that’s currently active (heating

or cooling).

2 Next, touch the text area where the active

mode is displayed to switch to the inactive

mode.

3 Touch or to choose your preferred

temperature in the other mode. After

5 seconds of inactivity, your setting will take

effect, and the thermostat screen will show

the set point of the active mode.

Auto Chg. On

AM

Heat On

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

Auto Chg. On

AM

Heat On

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

AM

Heat On

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

Auto Chg. On

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

7

Current system mode (Heat, Cool, Off, Em Heat*)

is displayed on the thermostat home screen.

The mode that’s currently running (Heat On or

Cool On) is displayed in the upper-left corner of

the thermostat home screen.

To cycle through the available modes, touch Mode

on the thermostat home screen and select the

appropriate mode for your desired temperature.

• Heat: Controls the heating system.

• Cool: Controls the cooling system.

• Off: Turns the heating and cooling systems

off.

• Auto: When enabled, the thermostat will

automatically use heating or cooling to reach

the desired temperature.

• Em Heat: Controls auxiliary or emergency

heat; only available on systems with a heat

pump.

Notes:

• Em Heat is only available if the thermostat

is configured to control a heat pump and an

auxiliary/emergency heat stage.

• When Auto mode is selected, Auto Chg. On

will appear in the upper-right corner of the

thermostat home screen, and the active mode

(Heat or Cool) will display under Mode. To set

your temperature preferences in Auto mode,

see page 6.

*Em Heat and Auto modes may not appear on

the thermostat screen depending on your equip-

ment and how your thermostat was installed.

Selecting system mode

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

AM

Menu FanMode

Fan

Auto

Mode

Cool

AwayHome

Following Schedule

Auto Chg. On

AM

Menu FanMode

Fan

Auto

Mode

AwayHome

Following Schedule

8

If the compressor is restarted too soon after

a shutdown, system damage can occur. The

built-in compressor protection feature forces

the compressor to wait a few minutes before

restarting, helping to prevent damage to the

heating or cooling system.

During the brief wait period, the thermostat will

flash Cool On (or Heat On if you have a heat

pump) until the wait period is over, at which point

the compressor will turn back on.

Note: The flashing Cool On or Heat On message

is also used for startup delay protection if AC

power loss occurs.

Built-in compressor protection

Setting the fan

Touch Fan on the thermostat home screen to

cycle through available fan modes until the

desired mode is displayed. Your changes will

save automatically.

Available fan modes:

• On: The fan will run continuously.

• Auto: The fan will run only when the heating

or cooling system is on.

• Circ: The fan will run at random intervals at

least 35% of the time to keep air circulating

throughout your home.

AM

Menu FanMode

Fan

Circ

Mode

Heat

AwayHome

Following Schedule

AM

Menu FanMode

Fan

On

Mode

Heat

AwayHome

Following Schedule

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

AM

Cool On

Menu FanMode

Fan

Auto

Mode

Cool

AwayHome

Following Schedule

9

To add to include or remove to exclude the

thermostat from ZWave network, go to

thermostat MENU/ZWAVE SETUP.

• Touch Select. You will be asked to set your primary

controller to INCLUDE MODE. Please refer to

the user manual of your ZWave controller.

• After inclusion procedure has been initiated

on your ZWave controller, touch Select on the

thermostat.

• If the inclusion procedure is successful,

"INCLUDED", the node ID, and the ZWave

connected status icon appear on the screen.

If the procedure fails, “FAILED TO INCLUDE”

appears on the screen. If this happens, position

the thermostat closer to the ZWave controller

and repeat the inclusion procedure.

• Your controller will indicate whether the thermostat was successfully added to its

network. (Please refer to the user manual of your ZWave controller.)

NOTES:

• Once the thermostat is included into the ZWave network, it assumes to be

programmed from your ZWave controller and the program schedule on the

thermostat is turned OFF by default. If the thermostat is not included into the

ZWave network, then this thermostat will function as normal programmable

thermostat. For more information, see "Scheduling options" on page 12.

• Before adding the thermostat to a ZWave network, check that it does not already

belong to one. If the thermostat is included in ZWave network, it offers to exclude.

If the thermostat is excluded from ZWave network, it offers to include. You can also

check the status by viewing the Node ID located in the thermostat MENU/DEVICE

INFO. An excluded thermostat should show zero for the Node ID (000).

• Whether you are adding the thermostat for inclusion or removing for exclusion from

ZWave network, first you have to initiate it on your ZWave controller. Please refer to

the user manual of your ZWave controller.

• For other specific tasks, such as adding the thermostat to home automation scenes

or groups, refer to the ZWave controller instructions.

• The T6 Pro ZWave thermostat works in the optional ZWave battery mode or normal

power mode based on its power source. The ZWave power mode can only be

changed when thermostat is NOT included in ZWave network. You can check the

power mode in the thermostat menu under MENU/DEVICE INFO.

• If 24 VAC power source is not used or available, the thermostat must be powered by

batteries. The thermostat will operate in LSS mode (power-save, sleep mode) to help

conserve battery life after it has been included in a ZWave network. The ZWave

radio supports beaming. It allows other devices in the network to wake up the

ZWave thermostat, accept commands, and then go back to sleep.

• If you need the thermostat to operate AOS mode (always listening mode) to act as

signal repeater and to increase network reliability, you need to ask your professional

installer to power the thermostat by 24 VAC.

ZWave setup

Cancel

Back Select

10

ZWave connection status is located in the upper-right

corner of the screen.

• Thermostat is included and connected to a

ZWave network.

• Thermostat is excluded from a ZWave network.

• Thermostat is either included in a ZWave

network but the ZWave signal is lost, or is

included but AC power is lost (battery used as backup). In this case, ZWave

radio is turned off to preserve battery life. AC power must be restored or you have

to change the power mode. It can be done via excluding thermostat from ZWave

network and including again in battery power mode where batteries are used as

main power source. You can check the actual power mode in the thermostat

MENU/DEVICE INFO.

ZWave connection status

AM

Menu FanMode

Fan

Auto

Mode

Heat

Wake AwayHomeSleep

Following Schedule

Example of Wi-Fi is connected.

Wiﬁ is on and

connected

Wiﬁ is disconnected

or wiﬁ is not setup

Wiﬁ is off

AM

Menu FanMode

Fan

Auto

Mode

Heat

Wake AwayHomeSleep

Following Schedule

Example of Wi-Fi is connected.

Wiﬁ is on and

connected

Wiﬁ is disconnected

or wiﬁ is not setup

Wiﬁ is off

AM

Menu FanMode

Fan

Auto

Mode

Heat

Wake AwayHomeSleep

Following Schedule

Example of Wi-Fi is connected.

Wiﬁ is on and

connected

Wiﬁ is disconnected

or wiﬁ is not setup

Wiﬁ is off

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHomeSleep

Following Schedule

Example of thermostat

included and connected in

a

Z-Wave network.

11

Touch Menu on the thermostat screen and then use the or arrows to page through

the following options.

Main menu overview

CLEAN SCREEN

Disable the touchscreen for

30 seconds so you can clean it.

TEMP SCALE

Choose Fahrenheit or Celsius.

RESET

Schedule: Resets to the default

MondayFriday, SaturdaySunday local

thermostat schedule.

EQMP STATUS

View current status of your heating or

cooling equipment.

DEVICE INFO

View your thermostat’s device

information, such as ZWave power

mode, ZWave node, home ID, and

model number.

ALERTS

View, snooze or dismiss active alerts

and reminders (available only when you

see the active alert symbol on the

thermostat home screen).

Navigating the menus

Menu: Touch to access all options and sub-menus.

or : Touch to page through options and sub-menus.

or : Touch to adjust things such as temperature, time and date.

Back or Cancel: Touch to discard changes or go back to the previous menu.

Select: Touch to access a sub-menu.

Done: Touch to confirm selection.

Tip: You can touch Select to access a sub-menu, or you can touch the text in the

message area (the word SCHEDULE, for example).

SCHEDULE

Edit local thermostat program

schedule. (Available only if enabled

by your local heating or cooling

professional.)

AWAY SETTING

Set energy saving temperature settings

for when you are away. (Available as a

separate Menu item if thermostat is

included in ZWave network.)

SCREEN LOCK

Lock the screen to limit access to

thermostat settings.

Z-Wave SETUP

Include or exclude the thermostat from

ZWave network.

BRIGHTNESS

Set the brightness of an inactive

backlight. (Available only if the

thermostat is powered by 24 VAC.)

RECOVERY

Enable or disable the Adaptive

Intelligent Recovery feature. (Available

only if the local thermostat schedule is

enabled and turned on.)

CLOCK / DATE

Manually set the clock, clock format

and daylight saving time in the CLOCK

sub-menu, and date in the DATE sub-

menu.

12

Scheduling options

This thermostat may be configured to be programmable or non programmable.

Thermostat schedule is an optional menu item. It will only show up in the thermostat

menu if enabled by your heating or cooling professional. It provides setting for local

thermostat schedule control.

Once the thermostat is included into ZWave network, it assumes to be programmed

from your ZWave controller and the program schedule on the thermostat is turned

OFF by default.

• Only Home and Away periods appear on the thermostat home screen.

• Home temperature settings are adjustable on the thermostat Home screen.

Common for all days.

• Away mode is an Energy saving mode adjustable in the thermostat MENU/AWAY

SETTING. Common for all days.

See table below with default, adjustable settings:

Thermostat schedule is turned OFF, thermostat included in ZWave network

Period Start Time Heat Cool

Away N/A* 62 °85 °

Home N/A* 72 °78 °

*Triggered by ZWave controller

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHome

Following Schedule

Back Sched.

On/Off

Enabling thermostat schedule when thermostat is included in ZWave network

(optional):

ZWave controllers from various manufacturers may or may not support the ZWave

Thermostat General V2 Device class used by the Honeywell Home T6 Pro ZWave

Thermostat. If your controller does not support full thermostat device class functions,

it may still be able to control basic Home/Away (Energy Saving) modes of the

thermostat through basic ZWave commands (On/Off) used by the controller for other

ZWave devices (eg. lighting devices). When only basic commands capable to receive

from controller, you can enable the local thermostat schedule to differentiate between

temperatures when you are away and when you are at home to differentiate between

home and sleep temperatures.

• Home, Away and Sleep periods appear on the thermostat home screen.

• Home and Sleep temperature and time settings are adjustable in the thermostat

MENU/SCHEDULE.

• Away mode is an Energy saving mode adjustable in the thermostat MENU/AWAY

SETTING. Common for all days.

13

See table below with default 5+2 schedule (MonFri; SatSun), adjustable settings:

Thermostat schedule is turned ON, thermostat included in ZWave network

Period Start Time Heat (MonFri) Cool (MonFri) Heat (SatSun) Cool (SatSun)

Away N/A* 62 °85 °62 °85 °

Home 6:00 Am 70 °78 °70 °78 °

Sleep 10:00 Pm 62 °85 °62 °85 °

*Triggered by ZWave controller

Back Sched.

On/Off

Back Select Back Select Sched.

On/Off

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHomeSleep

Following Schedule

• If the Schedule menu on the thermostat does not appear, make sure that

thermostat schedule is enabled by your heating or cooling professional in the

thermostat Installer setup menu. This menu also allows to choose from pre-defined

different thermostat program schedules such as all days the same, different

weekdays and weekends, individual days to be adjustable in the thermostat MENU/

SCHEDULE.

Program schedule on the thermostat when not included in ZWave network (not operated

by ZWave controller):

The Honeywell Home T6 Pro ZWave thermostat will function as fully programmable thermostat

when not operated by your controller. Each day can be programmed for different heating and

cooling settings in 4 unique periods (Wake, Away, Home, Sleep) in the thermostat MENU/

SCHEDULE. Make sure that thermostat schedule is enabled by your heating or cooling

professional in the thermostat Installer setup menu.

See table below with default 5+2 schedule (MonFri; SatSun), adjustable settings:

Thermostat schedule is turned ON, thermostat excluded from ZWave network

Period Start Time Heat (MonFri) Cool (MonFri) Heat (SatSun) Cool (SatSun)

Wake 6:00 am 70 °78 °70 °78 °

Away 8:00 am 62 °85 °62 °85 °

Home 6:00 Pm 70 °78 °70 °78 °

Sleep 10:00 Pm 62 °85 °62 °85 °

Back Sched.

On/Off

Back Select Back Select Sched.

On/Off

AM

Menu FanMode

Fan

Auto

Mode

Heat

Wake AwayHomeSleep

Following Schedule

• Wake, Away, Home, Sleep periods appear on the thermostat home screen.

• Temperature settings for all four periods, different per days or group of days are

adjustable in thermostat MENU/SCHEDULE.

14

Schedule period

An active period is shown underlined on the

thermostat home screen. Periods shown varies

on whether thermostat is included in ZWave

network and whether local thermostat schedule

is enabled and turned On.

Thermostat INCLUDED in ZWave network:

1 Thermostat schedule is turned OFF: Away,

Home periods are displayed.

2 Thermostat schedule is turned ON: Away,

Home, Sleep periods are displayed.

Thermostat EXCLUDED from ZWave network:

1 Thermostat schedule is turned OFF:

Schedule periods are not displayed.

2 Thermostat schedule is turned ON: Wake,

Away, Home, Sleep periods are displayed.

Back Select

Setting a schedule

To edit a schedule on the thermostat screen,

follow the steps below.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

SCHEDULE, then touch Select.

3 Touch the or arrows to select a period in

a day or set of days, then touch Select on the

period you want to edit.

4 Touch the time area, then touch or to

adjust when the period starts. Touch Select to

conﬁrm.

5 Touch the temperature area, then touch

or to adjust your preferred temperature

for the mode that’s currently active (either

heating or cooling). Touch Select to conﬁrm.

Then touch or to adjust your preferred

temperature for the inactive mode. Touch

Select to conﬁrm.

6 Edit the next period or use the until you

see DONE, then press Select to save changes

and go to the home screen.

NOTE: Schedule menu is available only if

enabled in the thermostat Installer setup menu.

Back Select Sched.

On/Off

Back Select Sched.

On/Off

AM

HeatTo

Back Select

AM

HeatTo

Back Select

AM

Menu FanMode

Fan

Auto

Mode

Heat

Away

Following Schedule

AM

Menu FanMode

Fan

Auto

Mode

Heat

Wake

Following Schedule

AM

Menu FanMode

Fan

Auto

Mode

Heat

Sleep

Following Schedule

AM

Menu FanMode

Fan

Auto

Mode

Heat

Home

Following Schedule

15

Reset schedule

Back Select

No

Yes

To reset the thermostat schedule back to the

default temperature settings (see "Scheduling

options" on page 12), follow steps below.

1 Touch Menu on the thermostat screen.

2 Touch the or arrows until you see

RESET, then touch Select.

3 Touch the or arrows until you see

SCHEDULE, then touch Select.

4 Touch Yes to conﬁrm. Note:

NOTE: Reset schedule menu option is available

only if thermostat schedule enabled in the

thermostat Installer setup menu.

To prevent unauthorized access to the thermostat, or to limit changes to the system

settings, there are two screen lock settings you can apply.

• Partial lock: Only the temperature can be changed.

• Full lock: No access is allowed without a PIN number.

Screen lock settings

Back Select

No

Yes

Back Select

Applying a screen lock setting

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

SCREEN LOCK, then touch Select.

3 Touch the or arrows to select your

desired screen lock setting, then touch Select.

4 A PIN number will appear on screen. Write

it down and keep it in a safe place for later

reference.

5 Touch Select, and conﬁrm your screen lock

setting by touching Yes.

A partially or fully locked screen will be indicated

by a lock symbol at the bottom of the thermostat

screen.

16

Back Select

Unlocking the screen

1 Touch the lock symbol on the thermostat

home screen.

2 When prompted to enter a PIN number,

touch or to select the ﬁrst number of

the PIN code. Touch Select to conﬁrm, and

repeat for the remaining numbers.

When you enter the correct PIN, you’ll return

to the thermostat home screen. To re-lock the

screen after you’re done making changes, follow

the steps above to apply a lock setting.

AM

Fan

Auto

Mode

Heat

AwayHomeSleep

Following Schedule

When the thermostat is in idle mode, you can

adjust how bright you’d like the screen. You

can choose a brightness level from 00 (display

backlight is off, which is the default) up to 05

(maximum brightness). To adjust backlight

brightness, follow the steps below.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

BRIGHTNESS, then touch Select.

3 Touch or to adjust the brightness level,

which will change immediately.

4 Touch Done to conﬁrm.

NOTE: This setting is only available if thermostat

is powered by 24 VAC. This setting only applies

to times when thermostat is not touched. When

adjusting settings thermostat is always at full

brightness.

Adjusting backlight brightness

Back Select Done Cancel

17

Setting the time and date

Back Select

PM

Done Cancel

Back Select

Setting the time

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

CLOCK, then touch Select.

3 Touch the or arrows until you see SET

TIME, then touch Select.

4 Press or to set the time (or press and

hold the buttons to move more quickly).

Touch Done when ﬁnished.

5 Set clock format (12 hours or 24 hours) and

daylight saving time in the same CLOCK

sub-menu.

Setting the date

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see DATE,

then touch Select.

3 Touch or to set the month, then touch

Select to conﬁrm.

4 Continue to set day and year in the same

way. Touch Select to save your changes.

Back Select

Over time, your T6 Pro ZWave thermostat will

learn how long it takes your system to reach

the desired temperature. It can then turn on

your heating or cooling equipment at the right

time to make sure your home is comfortable by

the time you expect. This feature is available

only if thermostat schedule is enabled in the

thermostat Installer setup menu and turned On.

To disable it follow steps below:

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

RECOVERY, then touch Select.

3 Touch the or arrows to select

RECOVERY ON or RECOVERY OFF, then

touch Done to conﬁrm.

When Adaptive Intelligent Recovery is active,

you’ll see the recovery symbol in the upper-right

corner of the thermostat screen.

Enabling/disabling Adaptive Intelligent Recovery

Back Select Done

Cancel

Recovery

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHomeSleep

Following Schedule

Recovery

18

With the clean screen option, you can lock the

thermostat screen so you don’t accidentally

change your settings when you clean. Follow the

steps below to activate clean screen mode.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

CLEAN SCREEN, then touch Select.

The screen will deactivate for 30 seconds. A

countdown timer will display the amount of time

until screen reactivation.

Tip: To clean the thermostat screen, spray water

or household cleaner onto a cloth, then use

the cloth to clean the screen. Avoid abrasive

cleaners and do NOT spray liquid directly on the

thermostat.

Cleaning the thermostat screen

Back Select

To select a temperature scale, follow the steps

below.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see TEMP

SCALE, then touch Select.

3 Touch the or arrows to select

FAHRENHEIT or CELSIUS then touch Done to

save your changes.

4 Touch Back to return to the thermostat home

screen.

Choosing Fahrenheit or Celsius

Back Select

Done

Cancel

Recovery

19

To see your thermostat’s technical information,

follow the steps below.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see

DEVICE INFO, then touch Select.

3 Touch the or arrows to view information

such as:

• Model Number

• Power Mode

• ZWave Node ID

• ZWave Home ID

• Serial Number

• Date code

• Firmware version

• ZWave Firmware version

• ZWave library

Viewing thermostat information

Back Select

You can check the status of your heating or

cooling equipment and fan by following the

steps below. Please note that system data may

vary depending on thermostat model and how

the thermostat was installed.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see EQMT

STATUS, then touch Select.

3 Touch the or arrows to select which

system you want status information on.

After 3 seconds, system status information will

scroll on the screen.

Viewing equipment status

Back Select

Done

20

Battery replacement

Batteries are optional (to provide backup power)

if your thermostat was wired to run on 24 VAC

power when installed. If your thermostat was

wired to run on 24 VAC power, then batteries are

NOT required.

Install fresh batteries immediately when the low

battery alert appears. The alert appears about

two months before the batteries are depleted.

Even if the low battery alert does not appear, you

should replace batteries once a year, or before

leaving home for more than a month.

If batteries are inserted within two minutes, the

time and day will not have to be reset. All other

settings are permanently stored in memory, and

do not require battery power.

NOTES:

• When replacing batteries, alkaline batteries

are recommended.

• When the battery power is low, the

thermostat’s backlight is disabled to save

battery power.

• When battery power is critically low, only the

alert icon and the battery icon are displayed,

and the thermostat cannot control your

HVAC system. Batteries must be replaced

immediately.

When the low battery alert appears,

press gently to loosen the thermostat

and then carefully pull it from the

wall mount.

Insert fresh alkaline AA batteries and

reinstall thermostat. Match the polar-

ity of the batteries with the

+ / – marks inside the battery com-

partment.

Auto Chg. On

AM

Menu FanMode

Fan

Auto

Mode

Heat

AwayHomeSleep

Following Schedule

La page est en cours de chargement...

Honeywell Home TH6320ZW2003/U Le manuel du propriétaire

Ce manuel convient également à

Honeywell Home TH6320ZW2003/U Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents