Midea MNRG17-W Manuel utilisateur

NRG™ Nut Rice Grain

Milk Extractor and

Blender

version A - 10 - 2017

MNRG17-W

www.midea.com

USER MANUAL

en

Warning notices: Before

using this product, please

read this manual carefully

and keep it for future

reference.

The design and

specifications are subject to

change without prior notice

for product improvement.

Consult with your dealer or

manufacturer for details.

Rated voltage: 120V-60 Hz

Rated power: Motor: 130 W

Heating: 1000 W

Frequency: 60Hz

Capacity: Min 48 oz (1.4 L)

Max 56 oz (1.7 L)

Page 2

Table of Contents

1

MILK MAKER SAFETY ....................................................................... 3

2

OPERATING REQUIREMENTS .......................................................... 4

Electrical Requirements ....................................................................... 4

Location Requirements ........................................................................ 5

3

PARTS AND FEATURES ..................................................................... 6

4

MILK MAKER USE .............................................................................. 8

Processing Functions ........................................................................... 8

Controls ................................................................................................ 9

Making Nut, Rice or Grain Milk ............................................................ 9

Making Tofu ........................................................................................ 11

5

RECIPES ........................................................................................... 14

6

MILK MAKER CARE ......................................................................... 16

Cleaning ............................................................................................. 16

Storage ............................................................................................... 17

7

TROUBLESHOOTING ....................................................................... 17

Speciﬁcations

Model Dimensions Power Voltage Capacity

MNRG17-W 9

3/4 " x 71/4 " x

131/4 "

Motor: 130 W

Heating: 1000 W

120V-60 Hz Min 48 oz

(1.4 L)

Max 56 oz

(1.7 L)

Page 3

Safety

Precautions

Milk Maker Safety

1

To prevent injury to the user or other people and property damage, the

instructions shown here must be followed. Incorrect operation due to

ignoring of instructions may cause harm or damage. The level of risk is shown

by the following indications.

CAUTION

WARNING

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to property.

When using electrical appliances, basic safety precautions should always be

observed, including the following:

•

Read all instructions before use.

•

To protect against risk of electrical shock, do not immerse the electric

cord, plug, milk chamber or processor in water or other liquids.

•

Unplug from outlet when not in use, before putting on or taking off parts,

and before cleaning. Make sure the motor stops completely and allow it to

cool before disassembling.

•

Never unplug the appliance by pulling the power cord. Always grip the

plug ﬁrmly and pull straight out from the receptacle.

•

Do not operate unattended.

•

Close supervision is necessary when any appliance is used by or near

children.

•

Avoid contact with moving parts.

•

Do not operate any appliance with a damaged cord/plug, after the

appliance malfunctions, or if it is dropped or damaged in any manner.

Return appliance to the nearest authorized service facility for examination,

repair, electrical, or mechanical adjustment.

•

The use of attachments not recommended or sold by the manufacturer

may cause ﬁre, electric shock, or injury.

•

Do not use outdoors.

•

Do not let cord hang over the edge of table or counter, or touch hot

surfaces.

•

Do not place on or near a hot gas or electric burner, or in a heated oven.

Page 4

Operating

Requirements

•

To disconnect, turn control to Off, and wait until motor stops before

removing plug from the electrical outlet.

•

Always connect power cord to appliance ﬁrst, then plug cord into the

electrical outlet.

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

Operating Requirements

2

Electrical Requirements

Ensure the voltage of your electrical wall outlet corresponds to the voltage

listed on the appliance.

Grounded Plug

As a safety feature, this product is equipped with a grounded plug, which will

only ﬁt into a 3-prong outlet. Do not attempt to defeat this safety feature.

Improper connection of the grounding conductor may result in the risk of

electric shock.

Consult a qualiﬁed electrician if you are in doubt as to whether the outlet is

properly grounded.

Power Supply Cord

The power supply cord should only be plugged into a 120V AC electrical wall

outlet.

If the electric circuit is overloaded with other appliances, your appliance may

not operate properly. It should be operated on an electrical circuit separate

from other appliances.

•

To connect power: Attach the power cord plug to the appliance ﬁrst, and

then plug the cord into the wall outlet.

•

To disconnect power: Turn the control to the Off position, and then grasp

the power cord by the plug to remove it from the wall outlet.

Page 5

Operating

Requirements

Short Cord Instructions

A short power supply cord is provided to reduce the risk of becoming

entangled in or tripping over a longer cord.

Longer extension cords are available and may be used if care is exercised in

their use.

If a longer extension cord is used:

•

The marked electrical rating of the extension cord should be at least as

great as the electrical rating of the appliance. If the electrical rating of

the extension cord is too low, it could overheat and burn.

•

The resulting extended cord should be arranged so that it will not

drape over the counter top or tabletop where it can be pulled on by

children or tripped over.

Location Requirements

•

Use milk maker only at altitudes less than 4921 ft (1500 m). Use at

altitudes greater than 4921 ft (1500 m) may result in raw soymilk, overﬂow

and paste.

•

Required clearance from other appliances is 12" (30 cm).

Cook

Mode

STOP

Low Med High Warm

Cook

Time

12"

(30 cm)

12"

(30 cm)

Page 6

Parts and

Features

Parts and Features

3

a

b

c

d

e

f

g

h

j

k

i

a Control Panel

b Processor

c Overow Sensor

d Milk Chamber

e Processor Handle

f Processor Plug

g Motor Shaft

h Grinding Blade

i Plug Receptacle

j Milk Chamber Handle

k Power Cord

Receptacle

Page 7

Parts and

Features

Attachments and Utensils

a b c d e

f g h i

a Pulp Container

b Pulp Container

Handle

c Filter

d Blender

e 4 oz Measuring Cup

f Power Supply Cord

g Tofu Mold

h Disc (2)

i Fine-mesh

Nut Milk Bag

NOTES:

•

Install the handle to convert the pulp container to a pitcher for the nut

milk.

a Pulp Container

b Pulp Container

Handle

•

Strain the processed milk through the ﬁlter to separate the milk from the

pulp. Use the blender to stir and press the pulp.

•

To avoid the risk of the contents overﬂowing the milk maker, the overﬂow

sensor reduces power to the milk maker when it senses the temperature of

the contents is becoming overheated.

CAUTION

During heating, there will be some hot spatters coming from the milk maker.

Page 8

Use

Milk Maker Use

4

CAUTION

•

Homemade nut milk should last about a week, if refrigerated. The Midea

NRG milk maker heats the water during processing, which pasteurizes

the milk.

•

Do not use the milk maker to reheat cold nut milk, reheat cold paste or

boil water.

Processing Functions

Processing times vary depending on the processing function selected. Thicker

milks and oatmeal require a longer processing time, and some functions both

stir and heat.

For optimum results, use the ratio of liquid to solid recommended in your

recipe. However, the ratio can be adjusted to suit your personal taste.

Your model has a capacity of 48 oz to 56 oz (1.4 L to 1.7 L).

Processing

Function

Time

(minutes)

Main Ingredients

Tofu 33

Soybeans and Gypsum Powder

Nut Milk 30

Nut of choice: Almonds, Cashews, Walnut,

Pecans etc.

See recipe later in this section.

Rice/Grain Milk 30

White Rice, Brown Rice, or Quinoa

Oatmeal 28

Rolled Oats

Soup/Puree* 26

Fruit or Vegetable of choice

See recipe later in this section.

Smoothie (stir

only)*

3

Fruit and Milk or Juice of choice

See recipe later in this section.

*Dice food into

1/2 " pieces no larger than the size of a peanut.

½

"

Page 9

Use

Controls

MENU

S

T

A

R

T

C

A

N

C

E

L

T

o

f

u

N

u

t

M

i

l

k

O

a

t

m

e

a

l

S

m

o

t

h

i

e

R

i

c

e

G

r

a

i

n

M

i

l

k

S

o

u

p

P

u

r

e

b

c

a

a Function LED

Indicators

b Start/Cancel

Control

c Menu Control

Making Nut, Rice or Grain Milk

Your milk maker uses dried bean pulping technology, so soy beans do not

REQUIRE pre-soaking before processing. However, soaking the soybeans

(legumes), nuts, rice or grain before processing will result in a greater milk

yield.

WARNING - Food Poisoning

• Soybean milk must be boiled before drinking.

• If kept at room temperature, fresh soybean milk should be drunk within 6 hours.

Failure to do so can result in food poisoning or sickness.

NOTE: Before ﬁrst use, remove the pulp container from the milk chamber, and

then clean all the parts that come into direct contact with food.

1. Clean and prepare food for processing.

2. Measure the prepared food and add it to the milk chamber.

NOTE: Use the 4 oz. measuring cup (provided) to precisely measure

ingredients. For optimum results, use only the ingredients in the amounts

speciﬁed in your recipe.

3. Fill the milk chamber with room-temperature tap water until the water

level is between the minimum and maximum water-level lines.

NOTES:

•

Use room-temperature tap water. Using distilled or puriﬁed water, or

hot water will result in over-boiling causing a burnt taste.

•

You can control the consistency of the nut, rice or grain milk by adding

a little more or less water as long as the water level falls between the

minimum and the maximum water level marks.

•

Using too much or too little water will adversely affect the milk making

process.

Page 10

Use

4. Plug the processor into the milk chamber. Make sure the plug on the

processor is fully inserted into the plug receptacle on top of the milk

chamber handle to complete the electrical connection.

a

d

c

b

a Processor

b Processor Plug

c Plug Receptacle

d Milk Chamber

WARNING - Electric Shock

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

Failure to follow these instructions can result in death, fire or electric shock.

5. Plug the power cord (provided) into the receptacle in the chamber handle,

and then plug the other end into a grounded 3-prong electrical outlet. The

milk maker will beep and the control lights will ﬂash to indicate that the

power is on.

a

b

a Plug Receptacle

b Plug

Page 11

Use

6. Press the MENU control. With each press of the MENU control, a

processing function icon will illuminate.

7. Press START/CANCEL to select the desired function and begin processing.

NOTE: If you unintentionally select the wrong function, press and hold

START/CANCEL for 3 seconds to cancel the function, and then press

MENU to reselect.

8. The milk maker will process according to the function selected. The

function light will ﬂash and a tone will sound to indicate processing is

complete.

NOTE: During the warming phase of the process, it is normal for the

processor to stir intermittently.

WARNING - Burn

• Allow time for the hot milk to drain from the processor and into the milk chamber.

• Carefully remove the processor from the milk chamber so that hot milk does not

contact skin.

Failure to do so can result in burns.

9. Unplug the power supply cord from the wall outlet. Wait 30 seconds for

the processor to drain before lifting the processor from the milk chamber.

CAUTION

The milk will be hot.

10. Holding the ﬁlter or the ﬁne-mesh bag over the container, pour the

processed milk through the ﬁlter or bag into a container.

NOTES:

•

The ﬁlter or milk bag acts as a strainer to separate the liquid from the

solids.

•

Use the blender to stir and press the liquid from the pulp.

11. Flavor the milk, if desired. Add a pinch of sea salt, brown sugar, vanilla, or

any other favorite ﬂavors.

12. Allow milk to cool before serving.

CAUTION

Soybean milk must be boiled before drinking. If kept at room

temperature, fresh soybean milk should be drunk within 6 hours.

Making Tofu

1. Wash and prepare the amount of soybeans speciﬁed in your Tofu recipe.

2. Using the 4 oz measuring cup (provided), measure the soybeans and

place them into the milk chamber.

3. Add room-temperature water to the maximum ﬁll line.

Page 12

Use

4. Plug the processor into the milk chamber. Connect the power cord to the

milk chamber receptacle, and then plug into the wall outlet.

5. Press MENU to select TOFU from among the processing functions, and

then press START/CANCEL to begin processing.

6. While the soybeans are processing, add gypsum powder to a container

(larger than 2 L). To the gypsum powder, add 5 oz to 7 oz (15 g to 20 g)

room-temperature water. Shake well to mix.

NOTE: This step must be completed before removing the soybean milk.

7. Once the soybean milk is processed, strain the processed milk through the

ﬁlter into the pulp container to separate the milk from the pulp. Use the

blender to stir and press the milk from the pulp.

NOTE: If desired, you may add sugar or ﬂavoring to the soybean milk at

this point.

8. Quickly pour the HOT, ﬁltered soybean milk into the gypsum powder

solution. The soybean milk must be hot when it is added to the gypsum

solution to produce the correct tofu pudding consistency.

NOTE: Pour the soybean milk into the gypsum solution. DO NOT pour the

gypsum solution into the soybean milk.

9. Let the mixture stand for approximately 10 minutes. Once the tofu

pudding has solidiﬁed, the tofu is ready to eat or mold.

Molding Tofu

1. With the Midea logo facing upward, insert a disc into the tofu mold

cylinder to create the bottom of the tofu mold.

a

b

a Disc

b Tofu Mold

2. Place the tofu mold onto a rimmed receptacle such as a cake pan or

cookie sheet to capture the liquid being pressed out of the tofu pudding.

3. Place the ﬁne-mesh bag (provided) inside the tofu mold to act as a liner.

4. Spoon the solidiﬁed tofu pudding into the nut milk bag.

5. Turn the other disc so that the Midea logo is facing downward and gently

press the disc into the tofu pudding.

Page 13

Use

6. Fill the pulp container with water and place it on top of the disc to

compress the tofu pudding. The hot liquid in the tofu pudding will ﬂow out

through the spaces in the mold.

a

b

a Pulp Container

b Tofu Mold

7. Allow the pulp container to remain in place for a minimum of 11/2 to 2 hours.

It can remain in place longer, depending on your ﬁrmness preference.

NOTES: To decrease the molding time, you may place a heavier object on

top of the water-ﬁlled pulp container.

8. After molding, remove the water-ﬁlled pulp container and pour out the

water. Replace the pulp container into the tofu mold, and then turn the

mold upside down.

9. Lightly press downward on the bottom disc while pulling up on the tofu

mold to push out the molded tofu.

b

a

c

a Bottom Disc

b Tofu Mold

c Pulp Container

Page 14

Recipes

5

Almond Milk

Yield: 44 oz. (1.3 L)

3 c. raw, Whole Almonds

5

1/2 c. Water

Directions

1. Rinse, and then soak 3 c. raw, whole almonds in a bowl overnight or for

8–12 hours.

NOTE: The longer you soak the almonds, the creamier the milk. Soaked

almonds will last 5 days, if refrigerated.

2. Place 3 c. soaked almonds and approximately 5

1/2 c. water into the milk

chamber.

3. Follow the instructions in the “Making Nut, Rice or Grain Milk” section to

process, cool and strain the milk.

Flavor the Almond Milk (Optional)

1/4 c. Raw Honey

1/2 Tbsp. Ground Cinnamon

1/2 Tbsp. Vanilla Extract

Dash of Nutmeg (optional)

Directions

1. Pour 3 c. almond milk into a pitcher.

2. In a small saucepan over med-high heat, place

1/4 c. raw honey, 1/2 Tbsp.

ground cinnamon, 1/2 Tbsp. vanilla extract and a dash of nutmeg (optional).

3. Heat until the honey is just melted.

4. Pour the honey mixture into the almond milk, and then stir until well

combined.

5. Place the pitcher into the refrigerator and chill for at least 2 hours. Stir well

before serving.

Page 15

Recipes

Tomato Vegetable Soup

Yield: 7 - 8 cups

7 c. peeled, seeded and chopped

Tomato

1 c. ﬁnely chopped Carrot

3/4 c. ﬁnely chopped Onion

1 (13.75 ounce) can Chicken Broth

1 Tbsp. White Sugar

2 tsp. Sea Salt

1 c. 2% Milk

2 tsp. Dried Basil

1/2 tsp. Celery Salt

1/2 tsp. Ground Black Pepper

1/4 tsp. Garlic Powder

Directions

1. Add the tomatoes, carrots, and onion to the milk chamber.

2. Stir in the chicken broth, sugar, and salt.

3. Season with basil, celery salt, black pepper, and garlic powder.

4. Press MENU to select Soup/Puree, and then press START/CANCEL to

begin processing.

Smoothie/Fruit Puree

Yield: 7- 8 cups

4 c. Orange Juice

2 c. Strawberries (frozen)

1 c. Blueberries (fresh, washed)

Directions

1. Add orange juice, frozen strawberries and fresh blueberries to the milk

chamber.

2. Press MENU to select Smoothie, and then press START/CANCEL to begin

processing.

Page 16

Care

Milk Maker Care

6

WARNING - Electric Shock

• DO NOT immerse processor in water or allow water to enter the processor.

• DO NOT immerse milk chamber in water.

Failure to follow these instructions can result in death, fire or electric shock.

Cleaning

If you have not recently used the milk maker, clean it well before using.

Clean the milk maker thoroughly after each use. Proper cleaning will ensure it

produces great results for many years.

CAUTION

Do not use harsh or abrasive materials to clean or dry the exterior, because

they may damage or dull the ﬁnish.

1. Unplug the power cord from the milk maker handle.

2. Remove all milk and nut, rice or grain paste or other food from the milk

chamber.

3. Clean the interior of the milk chamber with tap water taking care to not

immerse the base of the chamber in water.

4. Rinse the grinding blades under running water taking care to not allow

water to enter the processor.

a

b

a Processor

b Grinding Blades

5. Using a soft, damp cloth, wipe any residue from the exterior of processor.

NOTE: If residue is allowed to dry on exterior surfaces, it may damage the

ﬁnish.

Page 17

Troubleshooting

6. Using a soft dry cloth thoroughly dry both the exterior and interior of the

milk maker.

7. Hand wash the attachment parts with warm, sudsy water, rinse and dry

thoroughly.

NOTE: The accessory attachments are NOT dishwasher safe.

Storage

CAUTION

•

Do not store the milk maker while it is still hot or plugged into a wall

outlet.

•

Do not tightly wrap the power cord around the appliance.

1. Disconnect, clean and thoroughly dry the milk maker. See “Cleaning.”

2. Store in a dry, well-ventilated location.

NOTE: Excess humidity may reduce the life of the appliance.

Troubleshooting

7

Problem Possible Cause Solution

Milk maker will

not operate.

Milk maker is not plugged

into a working electrical

outlet.

Plug the power cord

into a grounded 3-prong

electrical outlet.

Power cord is not inserted

correctly into the milk

chamber handle receptacle.

Check the power cord

connection at the

container handle.

Control is not turned ON. Press Start/Cancel.

Page 18

Troubleshooting

The indicator

does not

illuminate.

The processor plug is not

ﬁrmly seated in the milk

chamber receptacle.

Check this electrical

connection. See “Parts

and Features.”

The milk maker

heats but does

not stir.

The milk maker is in the

heating stage of the

process.

Wait a few minutes.

The soybean milk

is not cooked

thoroughly or

the beans or rice

cannot be broken

into pieces.

Used too much or too little

water.

Add water until the

water level is between

the minimum and

maximum water lines.

Used too much or too little

of the solid ingredients.

NOTE: Good results require

a speciﬁc ratio of solid to

liquid.

Use only the

recommended amounts

of each ingredient

The function selected does

not match the food being

processed.

Select the function

appropriate for the food

being processed.

The milk maker is

operating for too

long a time.

The overﬂow sensor is not

clean.

Clean the processor and

the overﬂow sensor. See

“Cleaning.”

The water temperature is

too cold.

Use room temperature

tap water.

Used too much water. Add water until the

water level is between

the minimum and

maximum water lines.

All the LED

indicators ﬂash

continuously

and an alert tone

sounds.

Used too much water. Add only the

recommended amounts

of both ingredients and

water to the processing

chamber. Plug in and

turn on to conﬁrm that it

is functioning normally.

La page charge ...

Midea MNRG17-W Manuel utilisateur

Midea MNRG17-W Manuel utilisateur

dans d''autres langues

Autres documents