VAVA VA-IH006 Mode d'emploi

Marque
VAVA
Modèle
VA-IH006
Catégorie
Moniteurs vidéo bébé
Taper
Mode d'emploi
Model VA-IH006
VAVA Baby Monitor
User Manual
www.vava.com
Rev_1.6_EN
MADE IN CHINA
E-mail
support@vava.com
Manufacturer:
Manufacturer:
Shenzhen Danya Technology Co.,Ltd.
Address:
Room 2801,Building C,Galaxy World Phase ,Minle
Community,Minzhin Street,Longhua District,Shenzhen
Learn more about the EU Declaration of Conformity:
https://www.vava.com/pages/user-manual
CONTENTS
SAFETY INSTRUCTIONS
CAUTION
PACKAGE CONTENTS
PRODUCT DIAGRAM
GETTING STARTED
1. Charging & Powering Baby Monitor
2. Powering Camera
3. Pairing the Baby Monitor & the Camera
4. Placing the Camera
5. Wall Mounting Camera
6. Wide-Angle Lens (Optional)
FUNCTIONS & OPERATIONS
Monitor Interface Overview
1. Digital Zoom & Circulating
2. Pan-n-Tilt
3. Night Vision
4. Talkback
5. 5. Volume Adjustment
6. Display Brightness Adjustment
7. Camera
8. VOX
9. Alarm
10. Lullabies
11. Monitor Settings
SPECIFICATIONS
TROUBLESHOOTING
WARRANTY & CUSTOMER SERVICE
FCC STATEMENT
IC STATEMENT
01
01
02
03
05
05
05
05
06
06
07
08
08
09
10
10
10
10
11
11
14
15
15
15
19
21
22
23
25
EN
SAFETY INSTRUCTIONS
CAUTION
· Keep cord out of the reach of children (more than 3ft / 0.9m away) in case
of STRANGULATION.
· NEVER place the camera or cord in or near the crib or playpen.
· NEVER mount the camera directly above the crib or playpen to avoid the
risk of injury.
· Only use the AC adapters provided.
· Never use the unit near water, including near a bathtub, sink, laundry
machine tube, wet basement, etc.
· Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices that produce heat.
· Only use attachments and accessories specified by the manufacturer.
· Unplug this device when unused for long periods of time.
· Do not insert anything into the upgrade pinholes. This operation is only
intended for professionals.
· NOT toys. Do not allow children to play with them.
· The lens and lens hood are small parts, keep them out of your baby’s reach
at all times.
· This product is NOT intended to replace the proper supervision of children.
You MUST check your child’s activity regularly.
· This product is not intended for use as a medical camera and its use should
not replace adult supervision.
· Unplug the product during lightning storms.
· Please check the operating range and condition of the camera carefully at
PACKAGE CONTENTS
· Baby Monitor & Camera (Model: VA-IH006)
· Monitor Adapter with USB-C Charging Cable
· Camera Adapter
· Micro-USB Charging Cable
· Quick Start Guide
· User Guide
the initial installation, and on a regular basis after that.
· Check the reception regularly. Test the camera before use and after
changing the camera’s location.
· For indoor use only.
· Clean the camera with a dry cloth only.
· Do not block any ventilation openings.
· Microphone feedback might occur when the monitor is too close to the
camera. Please keep them at least 1.5m / 4.9ft apart.
MENU
ZOOM
TAL K
AUTO-PILOT
/ OK
User Guide
Quick Start
Guide
01 02
3ft
03 04
PRODUCT DIAGRAM
MENU
ZOOM
TALK
AUTO-PILOT
/ OK
Baby Monitor
Camera
1
1
5
5
6
6
7
7
10 9
4
4
9
8
8
10
11
12
13
15
14
16 17
18
2
2
Antenna
Volume Indicators
Microphone
Charging Indicator
Power Indicator
Menu Button
Zoom Button
Left Button
Up Button
Right Button
OK Button
Down Button
Talk Button
Power Button
Upgrade Pinholes
Back Stand
Speaker
USB-C Port
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
3
3
1
2
3
4
5
6
7
8
9
10
Camera Vents
Camera Antenna
Micro-USB Port
Temperature Sensor
Reset Pinhole
Power Switch
Speaker
Lens
Pairing Button
Mounting Hole
05 06
GETTING STARTED
1. Charging & Powering Baby Monitor
1) Connect the monitor adapter to the monitor and a power outlet.
2) Unplug the unit when its power indicator turns off, indicating a full charge.
3) Press the Power button on the monitor to power on with the power indicator
lighting green.
2. Powering Camera
1) Connect the camera to power source via the Micro-USB cable and
camera adapter.
2) Slide the Power Switch on camera to power on. Make sure the power
indicator light is green.
· Only use the power adapters included in the package.
· Do not place the camera and power cord within the reach of your
baby.
It’s strongly recommended to use a screw and screw anchor. Don’t
release the camera until you’re sure it is firmly mounted.
· Once they’re paired successfully, the camera number with icon
will be shown at the top left.
· Microphone feedback might occur when the monitor is too close
to the camera. Please keep them at least 1.5m / 4.9ft apart.
· It is recommended to pair in the baby's room, or wherever you
intend to place the camera.
3. Pairing the Baby Monitor & the Camera
By default, one camera has been paired with the monitor when manufactured.
When you power on the monitor and camera, the two will automatically pair.
To add more cameras, press the Pair Button at the bottom of the camera,
press Menu button, select through -> -> , and then the monitor will
auto-pair with the camera.
4. Placing the Camera
Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason
and for a better view when in night vision mode.
5. Wall Mounting Camera
1) Select the spot to mount the camera, keeping it beyond your baby’s reach.
2) Insert the screw (not included) pre-installed on wall into the mounting hole
of the camera.
1
1.5-2m / 4.9-6.6ft
07 08
6. Wide-Angle Lens (Optional)
The aluminum lens hood (no special video effects) has been installed when
the camera was manufactured.
To install wide-angle lens (sold separately), simply rotate the original lens
hood counterclockwise to remove. Then install the new lens and rotate
clockwise to fix in place.
1
1 2 3 4
225 PM 12:08
FUNCTIONS & OPERATIONS
Monitor Interface Overview
Top Status Indications
Install your wide-angle lens (separately sold) referring to the
previous mounting wide-angle lens section. Now you can view the
camera in a wider angle of about 170 degrees.
1
PM 12:08
2
Signal
Current Camera
Zoom
Current Temperature
Night Vision
Current Time
Alarm
Mute
Talk-back
Battery
Voice
4 levels
Camera 1 / Camera 2 / Camera 3/ Camera 4
2X / 4X
°C / °F
Auto ON in a dim environment
AM / PM
ON / OFF
Mute all system sounds
ON / OFF
5 levels
Voice transfer between 2 cameras
09 10
Bottom Menu Brief
Add Camera
Split Screen
View Camera
Delete Camera
Speaker Volume
Brightness
Camera
Max. 4 cameras
Select the cameras for split screen display
Select to view each at a time
Select to delete cameras
0-7 levels (mute when it’s 0)
1-8 levels
To add / view / delete cameras
OFF / 2Hr / 4Hr /6Hr / Set Time
(hour / minute / AM, PM)
Settings
Time
System sound volume
Temperature scale
Auto-sleep time
Restore to factory setting
Customer service contacts
Alarm
1 . Digital Zoom & Circulating
1) Under split screen mode, press Left / Right Button -> OK Button to select
the camera (Camera 1 or 2) you want to view or zoom in.
2) Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third
pressing of the button will restore to the original image.
3) Press and hold OK Button for 4 seconds to start auto circulating 2
cameras simultaneously, press OK again to stop. Then press Menu Button
to return to split screen display.
• The current zoom level number will be shown with the Zoom icon
on the monitor
• Under split screen mode, you can select only one camera to
zoom in.
2
2. Pan-n-Tilt
When viewing the camera, press Left / Right / Up / Down Button to view at
different angles, 108 degrees vertically and 270 degrees horizontally.
3 . Night Vision
The night vision is automatically activated in a dim environment. The camera
has 12 high-intensity infrared LEDs for picking up clear images in the dark.
Black and white images can be captured within 2m distance.
4. Talkback
1) Press Talk / Shortcut Button once to quickly adust the Volume or Brightness.
2) Talking Under Split Screen Mode:
• Press Left / Right Button to select the camera (Camera 1 or 2) you want
to talk to. Hold to talk and release to exit.
• When you enter the talking mode, the icon will be shown on
the monitor.
• When it’s mute or the speaker volume is too low, you may not
be able to hear the baby.
• When you’re pressing the Talk Button, the camera will not
transfer the sound to the monitor. Please release the button to
listen to your baby.
5. Volume Adjustment
1) Use Shortcut Button: Press Talk Button -> Left / Right Button to quickly
adjust the volume with & icons.
11 12
Four Cameras at most can be connected to one monitor.
7. Camera
Add Camera
1
12
√ √
3 4
2) Or you can press Menu Button: Choose
-> OK Button -> Left / Right Button
to volume down / up, and OK Button
to saving your settings.
For system sound adjustment, please go to Monitor Settings ->
System sound volume
2) Or you can press Menu Button: Choose
-> OK Button -> Up / Down Button
to turn up / down the brightness, and
OK Button to saving your settings.
6. Display Brightness Adjustment
1) Use Shortcut Button: Press Talk Button -> Up / Down Button to
quickly adjust the brightness with & icons.
1) Press Menu button, select through
-> -> to add a camera.
2) Press and hold the Pair Button on
the camera for 3 seconds
Split Screen
1) Press Menu button, select through ->
2) Then select two cameras (Camera 1/2/3/4)
for Split screen display
View Camera
1) Press Menu button, select through ->
to view a camera.
If there are 2 or more cameras, tap to
cycle through the added
cameras every 15 seconds.
Select the camera number (1/2/3/4) to view
the corresponding camera.
3) Once set, you can view two cameras at one
time without delay. The sound of the two
rooms will be switched every 15 seconds
4) Under Split screen mode, you can also press Left / Right Button -> OK
Button to select one camera (Camera 1 or 2) you want to view or zoom
in. Press the Menu Button to return to Split screen mode.
The split screen mode it turned on by default when the monitor
is powered on.
12
13 15
1234
Left / Right Button to volume down / up, and OK Button
to saving your settings
8. VOX
1) Explanation:
There are three options of sound detection, LOW(78dB), MEDIUM(65dB)
and HIGH(60dB). LOW means the sound can be detected if it reached
78dB, and so on for MEDIUM and HIGH.
Setting “ off ” turns off the alarm sound in VOX mode.
9. Alarm
1) Explanation:This function is to remind you of feeding your baby. OFF
means you shut down the function; 2 hour means it reminds you every 2
hours and so on for the other options.
10. Lullabies
1) Explanation: This function is to comfort baby when needed.
DeleteCamera
1) Press Menu button, select through
-> to delete a camera.
2) Press Menu button, Choose
-> OK Button.
2) Press Menu button, Choose
-> OK Button.
2) Press Menu button, Choose
-> OK Button.
2) Select the lullaby you want. Select
to play the lullabies in a loop.
3) Select the time you want. or set the hour and minute otherwise. When
the alarm time is reached, a beep will be heard. Press OK Button to
stop; otherwise it’ll keep beeping for 30s, beeping again in 1min, stops
after it’s alerted 3 times. .
3) Select the option you want. Press
OK Button.
You can switch viewing different cameras; the current camera
number will be shown with the Camera icon on the monitor.
At least one camera shall be added. Do not delete all the
cameras. If necessary, please add a new camera before
deletion.
OFF
Medium
Low
High
2Hr
OFF
Set Time
4Hr
6Hr
· When the timer is set, the Alarm icon will be shown on the monitor.
· Before setting, please check that the monitor time is your current time.
2
1
3
4
5
OFF 59 84 F
Screen auto-sleep time
1) Choose -> OK Button .
1) Choose -> OK Button .
System sound volume
This function is to adjust the monitor side system sound.
2) Select between 1min, 2min, 5min, and OFF.
Press OK Button
2) Select between Low, High, and Mute.
Press OK Button
1) Choose -> OK Button.
2) Select between °C and °F.
Press OK Button.
Temperature Alert
LOW
15 16
11. Monitor Settings
Explanation: This is the sub-menu of the function page where the
temperature alert icon, auto sleep time, System sound volume, date
and time, system language, Customer service contacts and Restore
to factory setting.
1) Press Menu button, Choose
-> OK Button.
2) Select the function to be adjusted.
1min
Screen off 2min
Screen off 5min
Screen off
Explanation: The monitor will prompt too high (>35°C / 95°F) and too
low (<0°C / 32°F) temperatures with the “HH” and “LL” icon,
accompanied with a & icon and a beep alert.
When the monitor is mute, you may not be able to hear the baby.
Always
on
· When the monitor screen is under sleep mode, the power indicator
flashes green slowly while the audio is still on; press any button to
awake. You can also short press the Power Button to turn
the screen off.
· Press and hold the Power Button to power on / off the monitor.
High Mute
· To mute the sound during poor monitor-camera connection, please
set the system sound volume to mute.
Date
1) Choose -> OK Button .
2) Set the current date by setting
the year, month and day.
Press OK Button
1) Choose -> OK Button .
Language
There are four languages built in your device, you can
choose your language here.
2) Select your language.
Press OK Button
Customer service contacts
1) Choose -> OK Button .
1) Choose -> OK Button .
Restore to factory
2) Check the email, Tel. number, and address
for customer service.
Press OK Button
2) Conform YES to reset. Press Menu
button or conform NO to exit.
17 18
Press OK Button to confirm resetting; “Restoring factory
settings” will be shown when restoring, and you can’t press any
button to control the device during this period. The monitor will
auto restart when it’s done.
· If you need to return to the video page, please press twice Menu
button or wait 30 seconds to return.
· If you need to return to the video page, please press twice Menu
button or wait 30 seconds to return.
2022 04 20
Time
1) Choose -> OK Button .
2) Set the current time by setting
hour, minute, and AM/ PM.
Press OK Button
05 04 PM
Factory Reset
:
YES NO
19 20
VA-IH009
IPS (720 x 1280), PPI=296
2.4GHz
16:9 (HD720)
h.264 (frame rate = 18fs)
280 - 300m (antenna vertically positioned at 90°)
Yes
7 levels
8 levels
Rotatable (max. 90 degree)
5V / 2A (1.5m long USB C cable)
Zoom In (2X)
Zoom In (4X)
2 cycles
Yes
Max. 4 cameras
-10°C ~ 55°C / 14°F - 131°F
0°C ~ 40°C / 32°F - 104°F
Model
Resolution
Connectivity
Image Aspect
Image Compression
Operating Range
Temperature Alert
Volume Control
Brightness
Antenna
Power Input
Zoom
Auto-Pilot
Two-Way Talk
Multi-Camera
Storage Temperature
Operation Temperature
SPECIFICATIONS
Monitor Camera
720p(1280x720), 1.0M, 1/4"
2.4GHz
h.264 (frame rate = 18fs)
5V / 2A, 2m-long Micro-USB cable
108 degrees vertical (Up=90, Down=18)
270 degrees horizontal (Left=135, Right=135)
Zoom In (2X)
Zoom In (4X)
2 cycles
Vertical: 1.5m, Horizontal: 1.4m
1.5m to 6m
Black & White image, 2m clear range up to 6m
Non-visible IR LED with wavelength 940nm (x 12 pcs)
Yes
Yes
-10°C ~ 55°C / 14°F- 131°F
0°C ~ 40°C / 32°F- 104 °F
Cmos
Connectivity
Image Compression
Power Input
Pan-n-Tilt
Zoom
Auto-Pilot
View Angle
Depth of Field
Night Vision
IR LED
Light Sensor
Two-Way Talk
Storage Temperature
Operation Temperature
21 22
TROUBLESHOOTING
· Check that the camera and monitor are turned on.
· Check the camera is connected to power properly (it
cannot be charged; it’s power off once disconnected
from power).
· Check that the monitor is of enough battery (it’ll auto
shut off when battery level icon flashes red slowly on
the monitor).
· Check the intactness of the power cable.
· Check whether the camera is near the monitor
(recommended to keep within 1.5-2m / 4.9-6.6ft).
· Check whether the monitor is of low battery. Charge it
in time to restore good connection.
· Check whether the camera is well connected to power.
· Check whether there are any large metallic objects
including doors, refrigerators, mirrors, etc., are placed
between the camera and monitor thus blocking the
radio signals.
· Check whether there’s any other 2.4GHz product is
used nearby like WiFi routers, microwave ovens, which
may interfere the connection.
· If nothing above is involved, please retry to pair:
press the Pair Button at the bottom of the camera,
press Menu button, select through -> -> , and
then the monitor will auto-pair with the camera.
· Check all connections to the camera (power cable
plugging and pairing).
· Check whether the screen is in sleep mode. Press any
button to awake it.
· Check whether the camera is within range of the
monitor.
· Adjust the monitor antenna to vertical position for
Product not
powering on?
Baby monitor
can’t connect
with the camera?
Nothing shown
when I view a
camera?
No sound from
the monitor?
Black and white
pictures?
Choppy videos?
Too much noise?
better signal transfer.
Check whether the system sound volume is set to “0”.
It’ll be mute if set so.
Night vision LED may be ON. Please turn on room lights
to force it out of the night mode.
· Check whether the camera is near the monitor and
that there’re no obstacles between them.
· Adjust the monitor antenna to vertical position for
better signal transfer.
· Volume may be set too high. Press Menu Button -> OK
Button -> Left Button to volume down.
· The camera and monitor may be put too close; keep
them at least 1.5m / 4.9ft apart.
· The camera may be too out of range. Please keep it
within 10m / 32.8ft to the monitor.
Software
Version?
Press the Power button on the monitor to turn off the
monitor. The software version will be displayed at the
screen bottom before power off.
WARRANTY & CUSTOMER SERVICE
12 months warranty
Lifetime customer service (contacts on the monitor, and back cover of this
User Guide)
23 24
FCC STATEMENT
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC RF Exposure Statement (for Camera)
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated
with a minimum distance of 20cm between the radiator & your body.
This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
25
IC STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-ex-
empt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d'Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
1) L'appareil ne doit pas produire de brouillage;
2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 rf, utilisa-
teurs peut obtenir l'information canadienne surl'exposition et la conformité
de rf.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ouémetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

VAVA VA-IH006 Mode d'emploi

Marque
VAVA
Modèle
VA-IH006
Catégorie
Moniteurs vidéo bébé
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents