Simplicity 7800969-00 Manuel utilisateur

Catégorie
Tondeuses à gazon
Taper
Manuel utilisateur

Ce manuel convient également à

Not for
Reproduction
21” Series 20 Steel Deck Walk Mowers
80013251USCN
Revision A
Copyright © 2015 Briggs & Stratton Power Products Group, LLC.
Milwaukee, WI, USA. All rights reserved.
Operator's Manual
Manual del operador
Manuel d'utilisation
Models Covered
7800946-01
7800947-01
7800969-00
7800970-00
en
es
fr
Not for
Reproduction
Thank You for purchasing this quality-built Snapper mower. We’re pleased that you placed your confidence in the
Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper mower
will provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with the
machine and how to avoid them. This machine is designed and intended only for finish cutting of established
lawns and is not intended for any other purpose. It is important that you read and understand these instructions
thoroughly before attempting to start or operate this equipment. Save these original instructions for future ref-
erence.
Date of Purchase___________________________________________________________________________
Retailer___________________________________________________________________________________
Retailer’s Phone Number_____________________________________________________________________
Equipment
Model Number_______________________________________________________________________
Serial Number_______________________________________________________________________
Engine
Model________________________Type_______________________Code______________________
Not for
Reproduction
3
Table of Contents
Operator Safety ................................................................................................4
Features and Controls ...................................................................................10
Operation ........................................................................................................11
Before Starting ...........................................................................................11
Oil Recommendations ................................................................................11
Fuel Recommendations .............................................................................12
Starting the Mower .....................................................................................12
Propelling the Mower .................................................................................12
Stopping the Mower ...................................................................................13
Handle Height Adjustment .........................................................................13
Cutting Height Adjustment .........................................................................13
Mulching Operation .................................................................................... 14
Installing the Discharge Deflector ...............................................................14
Installing the Grass Bag .............................................................................15
Charging the Battery ..................................................................................16
Maintenance ...................................................................................................17
Maintenance Chart ..................................................................................... 17
Change Engine Oil .....................................................................................18
Change Oil Filter (if equipped) ...................................................................18
Service Air Filter ......................................................................................... 18
Check Safety Interlock System ..................................................................19
Clean Debris Off Mower ............................................................................. 19
Storage Procedure .....................................................................................19
Service .......................................................................................................20
Troubleshooting .............................................................................................28
Warranties ....................................................................................................... 29
Slope Guide ....................................................................................................31
WARNING
Battery posts, terminals and related accessories
contain lead and lead compounds, chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
!
!
WARNING
Engine exhaust, some of its constituents, and certain
vehicle components contain or emit chemicals known
to the State of California to cause cancer or other
reproductive harm.
!
!
WARNING
It is a violation of California Public Resource Code,
Section 4442, to use or operate the engine on any
forest-covered, brush-covered, or grass-covered land
unless the exhaust system is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order. Other states or federal juris-
dictions may have similar laws. Contact the original
equipment manufacturer, retailer, or dealer to obtain
a spark arrester designed for the exhaust system
installed on this engine.
!
!
en
Not for
Reproduction
www.snapper.com4
Operator Safety
Operating Safety
Power equipment is only as safe as the operator. If it is misused, or
not properly maintained, it can be dangerous! Remember, you are
responsible for your safety and that of those around you.
Use common sense, and think through what you are doing. If you are
not sure that the task you are about to perform can be safely done
with the equipment you have chosen, ask a professional: contact your
local authorized dealer.
Read the Manual
The operator’s manual contains important safety information you need to
be aware of BEFORE you operate your unit as well as DURING operation.
Safe operating techniques, an explanation of the product’s features and
controls, and maintenance information is included to help you get the
most out of your equipment investment.
Be sure to completely read the Safety Rules and Information found on the
following pages. Also completely read the Operation section.
Children
Tragic accidents can occur with children. Do not allow them any-
where near the area of operation. Children are often attracted to the
unit and mowing activity. Never assume that children will remain
where you last saw them. If there is a risk that children may enter
the area where you
are mowing,
have another responsible adult
watch them.
Slope Operation
You could be seriously injured or even killed if you use this unit on
too steep an incline. Using the unit on a slope that is too steep or
where you don’t have adequate footing or traction can cause you to
lose control or slip and fall.
You should not operate on inclines with a slope greater than 10
degrees, which is a 3.5 ft (1,5 m) rise over 20.0 ft (6,0 m). Always
mow across slopes, never up and down.
Also note that the surface you are mowing can greatly impact con-
trol. Wet grass or leaves can seriously affect your footing and trac-
tion on a slope.
If you feel unsure about operating the unit on an incline, don’t do it.
It’s not worth the risk.
20.0 ft
(6,0 m)
3.5 ft
(1,5 m)
Operating Safety
Power equipment is only as safe as the operator. If it is misused,
or not properly maintained, it can be dangerous! Remember, you
are responsible for your safety and that of those around you.
Use common sense, and think through what you are doing. If you
are not sure that the task you are about to perform can be safely
done with the equipment you have chosen, ask a professional:
contact your local authorized dealer.
Read the Manual
The operator’s manual contains important safety information you
need to be aware of BEFORE you operate your unit as well as
DURING operation.
Safe operating techniques, an explanation of the product’s features
and controls, and maintenance information is included to help you
get the most out of your equipment investment.
Be sure to completely read the Safety Rules and Information found
on the following pages. Also completely read the Operation section.
Children
Tragic accidents can occur with children. Do not allow them
anywhere near the area of operation. Children are often
attracted to the unit and mowing activity. Never assume that
children will remain where you last saw them. If there is a
risk that children may enter the area where you are mowing,
have another responsible adult watch them.
Slope Operation
You could be seriously injured or even killed if you use this
unit on too steep an incline. Using the unit on a slope that is
too steep or where you don’t have adequate footing or trac-
tion can cause you to lose control or slip and fall.
You should not operate on inclines with a slope greater than
10 degrees, which is a 3.5 ft (1,5 m) rise over 20.0 ft (6,0 m).
Always mow across slopes, never up and down.
Also note that the surface you are mowing can greatly
impact control. Wet grass or leaves can seriously aect your
footing and traction on a slope.
If you feel unsure about operating the unit on an incline,
don’t do it. It’s not worth the risk.
3.5 ft
(1,5 m)
20.0 ft
(6,0 m)
Not for
Reproduction
5
Operator Safety
Moving Parts
This equipment has moving parts that can injure you or someone else.
However, if you stand behind the handle properly and follow all the rules in
this book, the unit is safe to operate.
The mower deck has a spinning mower blade that can amputate hands and
feet. Do not allow anyone near the equipment while it is running!
To help you, the operator, use this equipment safely, it is equipped with an
operator present safety system. Do NOT attempt to alter or bypass the sys-
tem. See your dealer immediately if the system does not pass all the safety
interlock system tests found in this manual.
Thrown Objects
This unit has a spinning mower blade. This blade can pick up and
throw debris that could seriously injure a bystander. Be sure to clean
up the area to be mowed BEFORE you start mowing.
Do not operate this unit without the entire grass catcher or discharge
guard (deflector) in place.
Also, do not allow anyone in the area while the unit is running! If
someone does enter the area, shut the unit off immediately until they
leave.
Debris Accumulation
Accumulation of grass and debris can result in a fire. Be sure to clean any
accumulation of
grass and debris with a brush or compressed air, before
and after operation.
Fuel and Maintenance
Gasoline is extremely flammable. Its vapors are also extremely flam-
mable and can travel to distant ignition sources. Gasoline must only
be used as a fuel, not as a solvent or cleaner. It should never be
stored any place where its vapors can build up or travel to an ignition
source like a pilot light. Fuel belongs in an approved, plastic, sealed
gas can, or in the tractor fuel tank with the cap securely closed.
Spilled fuel needs to be cleaned up immediately.
Proper maintenance is critical to the safety and performance of your
unit. Be sure to perform the maintenance procedures listed in this
manual, especially periodically testing the safety system.
Moving Parts
This equipment has moving parts that can injure you or someone
else. However, if you stand behind the handle properly and follow all
the rules in this book, the unit is safe to operate.
The mower deck has a spinning mower blade that can amputate
hands and feet. Do not allow anyone near the equipment while it is
running!
To help you, the operator, use this equipment safely, it is equipped
with an operator present safety system. Do NOT attempt to alter or
bypass the system. See your dealer immediately if the system does
not pass all the safety interlock system tests found in this manual.
Thrown Objects
This unit has a spinning mower blade. This blade can pick up and
throw debris that could seriously injure a bystander. Be sure to clean
up the area to be mowed BEFORE you start mowing.
Do not operate this unit without the entire grass catcher or dis-
charge guard (deector) in place.
Also, do not allow anyone in the area while the unit is running! If
someone does enter the area, shut the unit o immediately until
they leave.
Debris Accumulation
Accumulation of grass and debris can result in a re. Be sure
to clean any accumulation of grass and debris with a brush or
compressed air, before and after operation.
Fuel and Maintenance
Gasoline is extremely ammable. Its vapors are also extremely
ammable and can travel to distant ignition sources. Gasoline
must only be used as a fuel, not as a solvent or cleaner. It
should never be stored any place where its vapors can build
up or travel to an ignition source like a pilot light. Fuel belongs
in an approved, plastic, sealed gas can, or in the tractor fuel
tank with the cap securely closed. Spilled fuel needs to be
cleaned up immediately.
Proper maintenance is critical to the safety and performance
of your unit. Be sure to perform the maintenance procedures
listed in this manual, especially periodically testing the safety
system.
en
Not for
Reproduction
www.snapper.com6
WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects
that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in
serious injury or death to the operator or other persons. The owner of the machine must understand these
instructions and must allow only persons who understand these instructions to operate machine. Each
person operating the machine must be of sound mind and body and must not be under the influence of any
substance, which might impair vision, dexterity or judgment.
PROTECTION FOR CHILDREN
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted to
the machine and the mowing activity. Never assume that
children will remain where you last saw them.
1. KEEP children out of the mowing area and under the
watchful care of a responsible adult other than the oper-
ator.
2. DO NOT allow children in yard when machine is oper-
ated and turn machine OFF if anyone enters the area.
3. DO NOT allow pre-teenage children to operate machine.
4. ALLOW only responsible adults & teenagers with mature
judgment under close adult supervision to operate
machine.
5. DO NOT pull mower backwards unless absolutely
necessary. LOOK and SEE behind and down for chil-
dren, pets and hazards before and while backing.
6. USE EXTRA CARE when approaching blind corners,
shrubs, trees, or other objects that may obscure vision.
SLOPE OPERATION
1. Slopes are a major factor related to slip and fall acci-
dents, which can result in severe injury. All slopes
require extra caution. If you feel uneasy on a slope, DO
NOT mow it.
2. Mow across slopes, never up-and-down. Exercise
extreme CAUTION when changing directions on slopes.
DO NOT mow steep slopes or other areas where stabil-
ity or traction is in doubt. Refer to the Slope Guide at the
back of this manual.
3. Use extra care with grass catchers or other attach-
ments; these affect the handling and the stability of the
machine.
PREPARATION
1. Read, understand, and follow instructions and warnings
in this manual and on the mower, engine and attach-
ments. Know the controls and the proper use of the
mower before starting.
2. Only mature, responsible persons shall operate the
machine and only after proper instruction.
3. Data indicates that operators age 60 and above, are
involved in a large percentage of mower-related injuries.
These operators should evaluate their ability to operate
the mower safely enough to protect themselves and oth-
ers from serious injury.
4. Handle fuel with extra care. Fuels are flammable and
vapors are explosive. Use only an approved fuel con-
tainer. DO NOT remove fuel cap or add fuel with engine
running. Add fuel outdoors only with engine stopped and
cool. Clean spilled fuel and oil from machine. DO NOT
smoke.
5. Check the area to be mowed and remove all objects
such as toys, wire, rocks, limbs and other objects that
could cause injury if thrown by blade or interfere with
mowing. Also note the location of holes, stumps, and
other possible hazards.
6. Keep people and pets out of the mowing area.
Immediately, STOP Blade, Stop engine and Stop mower
if anyone enters the area.
7. Check shields, deflectors, switches, blade controls and
other safety devices frequently for proper operation and
location.
8. Make sure all safety decals are clearly legible. Replace if
damaged.
9. Protect yourself when mowing and wear safety glasses,
long pants and substantial footwear. DO NOT mow
barefooted or with sandals.
10. Know how to STOP blade and engine quickly in
preparation for emergencies.
11. Use extra care when loading or unloading the machine
into a trailer or truck.
12. Check grass catcher components frequently for signs of
wear or deterioration and replace as needed to prevent
injury from thrown objects going through weak or torn
spots.
Operator Safety
!
WARNING
POISONOUS GAS HAZARD. Engine exhaust contains carbon
monoxide, a poisonous gas that could kill you in minutes. You
CANNOT see it, smell it, or taste it. Even if you do not smell
exhaust fumes, you could still be exposed to carbon monox-
ide gas. If you start to feel sick, dizzy, or weak while using this
product, shut it off and get to fresh air RIGHT AWAY. See a
doctor. You may have carbon monoxide poisoning.
Operate this product ONLY outside far away from windows, doors and
vents to reduce the risk of carbon monoxide gas from accumulating and
potentially being drawn towards occupied spaces.
Install battery-operated carbon monoxide alarms or plug-in carbon
monoxide alarms with battery back-up according to the manufacturer’s
instructions. Smoke alarms cannot detect carbon monoxide gas.
DO NOT run this product inside homes, garages, basements, crawlspac-
es, sheds, or other partially-enclosed spaces even if using fans or open-
ing doors and windows for ventilation. Carbon monoxide can quickly
build up in these spaces and can linger for hours, even after this product
has shut off.
ALWAYS place this product downwind and point the engine exhaust
away from occupied spaces.
Not for
Reproduction
7
SAFE HANDLING OF GASOLINE
To avoid personal injury or property damage, use extreme
care in handling gasoline. Gasoline is extremely flammable
and the vapors are explosive.
1. Extinguish all cigarettes, cigars, pipes and other sources
of ignition.
2. Use only an approved fuel container.
3. DO NOT remove fuel cap or add fuel with the engine
running. Allow the engine to cool before refueling.
4. DO NOT refuel the machine indoors.
5. DO NOT store the machine or fuel container inside
where there is an open flame, spark or pilot light such as
on a water heater or other appliances.
6. DO NOT fill fuel containers inside a vehicle or on a
truck or trailer bed with a plastic liner. Always place the
containers on the ground away from the vehicle before
filling.
7. Remove gas-powered equipment from the vehicle or
trailer and refuel it on the ground. If this is not possible,
then refuel equipment using a portable container, rather
than a gasoline dispenser nozzle.
8. DO NOT start gas powered equipment in enclosed
vehicles or trailers.
9. Keep the nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
DO NOT use a nozzle lock-open device
10. If fuel is spilled on clothing, change clothing immedi-
ately.
11. DO NOT overfill a fuel tank. Replace fuel cap and tight-
en securely.
OPERATION
1. DO NOT put hands or feet near or under rotating parts.
Keep clear of discharge area while engine is running.
2. STOP engine when crossing gravel drives, walks, or
roads, and under any conditions where thrown objects
might be a hazard.
3. Mow only in daylight or good artificial light.
4. DO NOT operate mower while under the influence of
alcohol or drugs.
5. After striking a foreign object or if mower vibrates
abnormally, STOP the engine, disconnect and secure
spark plug wire. Inspect the mower for any damage and
repair the damage before starting.
6. DO NOT mow near drop offs, ditches or embankments.
Operator could lose footing or balance.
7. STAY ALERT for holes and other hidden hazards. Tall
grass can hide obstacles. Keep away from ditches,
washouts, culverts, fences and protruding objects.
8. DO NOT mow on wet grass. Always be sure of your
footing. Keep a firm hold on the handle and walk, never
run. Slipping could cause injury.
9. ALWAYS stay behind handle when engine (motor) is
running.
10. DO NOT leave the machine with the engine running.
STOP BLADE and STOP ENGINE before leaving the
operators position for any reason.
11. Before cleaning, repairing or inspecting make certain
engine, blade and all moving parts have STOPPED.
Disconnect and secure spark plug wire away from plug
to prevent accidental starting.
12. STOP engine and wait until the blade comes to com-
plete STOP before removing grass bag and/or clearing
grass.
13. DO NOT operate mower without the entire grass catch-
er, rear guard, or other safety devices in place and work-
ing. DO NOT point discharge at people, passing cars,
windows or doors.
14. DO NOT discharge material against a wall or obstruc-
tion. Material may ricochet back towards the operator.
15. Slow down before turning.
16. Watch out for traffic when near or crossing roadways.
17. DO NOT operate engine in enclosed areas. Engine
exhaust gases contain carbon monoxide, a deadly poi-
son.
18. Only use accessories approved by the manufacturer.
See manufacturer’s instructions for proper operation and
installation of accessories.
MAINTENANCE AND STORAGE
1. DO NOT store mower or fuel container inside where
fumes may reach an open flame, spark or pilot light such
as in a water heater, furnace, clothes dryer or other gas
appliance. Allow engine to cool before storing machine
in an enclosure. Store fuel container out of reach of chil-
dren in a well ventilated, unoccupied building.
2. Keep mower and engine free of grass, leaves or excess
grease to reduce fire hazard and engine overheating.
3. When draining fuel tank, drain fuel into an approved
container outdoors and away from open flame.
4. Keep all bolts, especially blade bolts, nuts and screws
properly tight. Check that all cotter pins are in proper
position.
5. Always provide adequate ventilation when running
engine. Engine exhaust gases contain carbon monoxide,
a deadly poison.
6. Service engine and make adjustments only when engine
is stopped. Removed spark plug wire from spark plug
and secure wire away from spark plug to prevent acci-
dental starting.
7. DO NOT change engine governor speed settings or
overspeed engine.
8. Check grass bag assembly frequently for wear or dete-
rioration to avoid thrown objects and exposure to mov-
ing parts. Replace with new bag if loose seams or tears
are evident. Replace slider or bag adapter if broken or
cracked.
9. Mower blades are sharp and can cut. Wrap the blades
or wear heavy leather gloves and use CAUTION when
handling them.
10. DO NOT test for spark by grounding spark plug next
to spark plug hole; spark plug could ignite gas exiting
engine.
11. Have machine serviced by an authorized dealer at least
once a year and have the dealer install any new safety
devices.
12. Use only factory authorized replacement parts or like
parts when making repairs.
Operator Safety
en
Not for
Reproduction
www.snapper.com8
Operator Safety
Safety and Operation Decals
Reading this manual and the safety instructions it con-
tains will provide the basic knowledge necessary to
operate this mower safely and effectively. However,
several safety and operation decals have also been
placed on the mower as a reminder of this important
information during operation.
The decals noted below are located on the mower.
The safety warnings and operation instructions they
contain should be carefully read, understood, and fol-
lowed. Not following these important warnings and
instructions can result in serious bodily injury or
death.
If any of these decals are lost or damaged, replace
them immediately. Contact your dealer for replacement
decals.
Keep Hands and Feet Away
Part No. 7105261
Warning/Danger
Part No. 7106303
Warning - Spark Arrestor
Part No. 7106305
Engine Speed Control
Part No. 7075532
Drive Control
Part No. 7028407
Ground Speed Control
Part No. 7075471
OPC (Blade Control)
Part No. 7029782
7105261
7075471
AMPUTATION AND THROWN
OBJECT HAZARD
Keep hands and feet away from deck.
• Do not operate mower unless
discharge chute or entire
grass catcher is in its proper place.
Read operator’s manual.
Keep safety devices (guards, shields,
switches, etc.) in place and working.
• Go across slopes, not up or down.
Remove objects that could be thrown
by blade.
• Do not mow when children or
others are around.
Look down and behind before and
while moving backwards.
• Wait at least 2 minutes before refueling.
AVOID SERIOUS INJURY OR DEATH
• Lire le manuel d’utilisation.
• Maintenir en place et en état de marche les
dispositifs de curi
té (protections, écrans,
commutateurs, etc.).
Passer latéralment sur les pentes, pas en montant ou
descendant.
Enlever les objets qui peuvent être projetés par la lame.
Ne pas tondre s’il y a des enfants ou des badauds aux
alentours.
Regarder en bas et derrière avant et pendant une marche arrière.
Patienter au moins 2 minutes avant de refaire le plein.
POUR ÉVITER DES BLESSURES GRAVES
VOIRE MORTELLES
• Garder mains et pieds à l’écart de la plate-forme de coupe.
Ne pas utiliser la tondeuse si le déversoir ou tout le bac à herbe
pas bien en place.
RISQUE D’AMPUTATION ET
OBJETS PROJÉTES
WARNING
AVERTISSEMENT
DANGER
DANGER
7106303
AVERTISSEMENTWARNING
7106305
Risque d’incendie. Ce matériel peut produire
des étincelles et démarrer des feux de
broussailles. Un pare-étincelles peut s’avérer
nécessaire. Contactez les organismes locaux
de lutte contre les incendies pour obtenir les
règlementations concernant les exigences de
prévention incendie.
Fire Hazard. Operation of this equipment
may create sparks that can start fires around
dry vegetation. A spark arrestor may be
required. The operator should contact local
fire agencies for laws or regulations relating
to fire prevention requirements.
7075532
Danger
Part No. 7106304
DANGER
DANGER
• Garder mains et pieds à l’écart de la
plate-forme de coupe.
• Ne pas utiliser la tondeuse si le déversoir
ou tout le bac à herbe pas bien en place.
RISQUE D’AMPUTATION ET OBJETS PROJÉTES
7106304
AMPUTATION AND THROWN OBJECT HAZARD
• Keep hands and feet away from deck.
• Do not operate mower unless discharge
chute or entire grass catcher is in its
proper place.
Not for
Reproduction
9
Operator Safety
Explanation of Safety Decals
Explanation of Operation Decals
DANGER
DANGER
• Garder mains et pieds à l’écart de la
plate-forme de coupe.
• Ne pas utiliser la tondeuse si le déversoir
ou tout le bac à herbe pas bien en place.
RISQUE D’AMPUTATION ET OBJETS PROJÉTES
7106304
AMPUTATION AND THROWN OBJECT HAZARD
• Keep hands and feet away from deck.
• Do not operate mower unless discharge
chute or entire grass catcher is in its
proper place.
7105261
7075532
7075471
AMPUTATION AND THROWN
OBJECT HAZARD
Keep hands and feet away from deck.
• Do not operate mower unless
discharge chute or entire
grass catcher is in its proper place.
Read operator’s manual.
Keep safety devices (guards, shields,
switches, etc.) in place and working.
• Go across slopes, not up or down.
Remove objects that could be thrown
by blade.
• Do not mow when children or
others are around.
Look down and behind before and
while moving backwards.
• Wait at least 2 minutes before refueling.
AVOID SERIOUS INJURY OR DEATH
• Lire le manuel d’utilisation.
• Maintenir en place et en état de marche les
dispositifs de curité (protections, écrans,
commutateurs, etc.).
Passer latéralment sur les pentes, pas en montant ou
descendant.
Enlever les objets qui peuvent êt
re projetés par la lame.
Ne pas tondre s’il y a des enfants ou des badauds aux
alentours.
Regarder en bas et derrière avant et pendant une marche arrière.
Patienter au moins 2 minutes avant de refaire le plein.
POUR ÉVITER DES BLESSURES GRAVES
VOIRE MORTELLES
• Garder mains et pieds à l’écart de la plate-forme de coupe.
Ne pas utiliser la tondeuse si le déversoir ou tout le bac à herbe
pas bien en place.
RISQUE D’AMPUTATION ET
OBJETS PROJÉTES
WARNING
AVERTISSEMENT
DANGER
DANGER
7106303
A
A CB D
B
D
B
A. OPC (Blade Control)
Squeeze blade control to start and run engine and
blade.
Release blade control to stop engine and blade.
B. Engine Speed Control
Move engine speed control in direction indicated to
increase or decrease engine speed.
C. Drive Control
Squeeze drive control against handle to engage
wheel drive.
D. Ground Speed Control
Move ground speed control toward Fast (Rabbit)
to increase ground speed.
Move ground speed control toward Slow (Turtle) to
decrease ground speed.
A. WARNING: Avoid Serious Injury or Death
Read the operator’s manual before attempting
to operate the mower.
Mow across slopes, not up or down.
To avoid injury to others, do not mow when
others, especially children, are around.
To reduce the potential for fire, wait at least 2
minutes before refueling.
B. DANGER: Amputation and Thrown Object Hazard.
To avoid serious injury or death, keep hands
and feet away from the mower deck at all times
during operation.
To avoid injury from thrown objects, do not
operate the mower unless all mulching, dis-
charge, or bagging components are in their
proper place.
C. WARNING: Spark Arrestor may be required.
D. DANGER: Keep Hands and Feet Away.
AVERTISSEMENTWARNING
7106305
Risque d’incendie. Ce matériel peut produire
des étincelles et démarrer des feux de
broussailles. Un pare-étincelles peut s’avérer
nécessaire. Contactez les organismes locaux
de lutte contre les incendies pour obtenir les
règlementations concernant les exigences de
prévention incendie.
Fire Hazard. Operation of this equipment
may create sparks that can start fires around
dry vegetation. A spark arrestor may be
required. The operator should contact local
fire agencies for laws or regulations relating
to fire prevention requirements.
C
en
Not for
Reproduction
www.snapper.com10
IMPORTANT
The figures and illustrations in this manual are pro-
vided for reference only and may differ from your
specific model. Contact your dealer if you have ques-
tions.
A. Mulching Cover
B. Rear Height Adjustment Latch (2)
C. Oil Fill Cap and Dipstick
D. Rope Start Handle
E. Engine Speed Control
F. Drive Control
G. Blade Control
H. Ground Speed Control
I. Fuel Filler Cap
J. Front Height Adjustment Latch (2)
C
E
I
D
A
B
F
H
J
Features and Controls
G
Not for
Reproduction
11
Before Starting
1. Check the guards, deflectors, grass bag, and cov-
ers to make sure all are in place and securely tight-
ened.
2. Check the blade control (A, Figure 1), drive con-
trol (B), and ground speed control (C) to insure
they work freely.
Figure 1: Mower controls
B
A
C
3. Check the cutting height. Adjust to the desired
height. Refer to the section entitled ‘Cutting Height
Adjustment’.
4. Check the engine oil:
• Make sure the mower is on a level surface.
• Clean the oil fill area of any debris.
• Remove the dipstick (A, Figure 2) and wipe with
a clean cloth.
• Insert and tighten the dipstick.
• Remove the dipstick and check the oil level. It
should be at the top of the full indicator (B) on the
dipstick.
• If low, add oil slowly into the engine oil fill. Refer
to the section entitled ‘Oil Recommendations’. Do
not overfill. After adding oil, wait one minute and
recheck the oil level.
• Replace and tighten the dipstick.
Figure 2: Oil and fuel fill
A
B
C
D
5. Add fuel to the tank:
• Make sure the mower is outside, where fumes
can safely dissipate.
• Remove the fuel fill cap (C, Figure 2).
• Fill the tank with fuel. Refer to the section entitled
‘Fuel Recommendations’. To allow for expansion
of the fuel, do not fill above the bottom of the filler
neck (D).
• Reinstall the fuel fill cap.
6. Clean the exterior surfaces of the cutting deck and
engine of any accumulation of spilled fuel, dirt,
grass, oil, etc. Keep the engine air intake screen
and cooling fins clear at all times.
7. Charge the battery. Refer to the section entitled
“Charging the Battery”.
Oil Recommendations
We recommend the use of Briggs & Stratton Warranty
Certified oils for best performance. Other high-quality
detergent oils are acceptable if classified for service
SF, SG, SH, SJ or higher. Do not use special additives.
Outdoor temperatures determine the proper oil viscos-
ity for the engine. Use the chart to select the best vis-
cosity for the outdoor temperature range expected.
* Below 40°F (4°C) the use of SAE 30 will result in
hard starting.
** Above 80°F (27°C) the use of 10W-30 may cause
increased oil consumption. Check oil level more
frequently.
Operation
Synthetic 5W-30
en
Not for
Reproduction
www.snapper.com12
Fuel Recommendations
Fuel must meet these requirements:
Clean, fresh, unleaded gasoline.
A minimum of 87 octane/87 AKI (91 RON). High
altitude use, see below.
Gasoline with up to 10% ethanol (gasahol) is
acceptable.
NOTICE: Do not use unapproved gasolines, such as
E15 and E85. Do not mix oil in gasoline or modify the
engine to run on alternate fuels. Use of unapproved
fuels will damage the engine components and void
the engine warranty.
To protect the fuel system from gum formation, mix a
fuel stabilizer into the fuel. See Storage. All fuel is not
the same. If starting or performance problems occur,
change fuel providers or change brands. This engine is
certified to operate on gasoline. The emissions control
system for this engine is EM (Engine Modifications).
High Altitude
At altitudes over 5,000 feet (1524 meters), a minimum
85 octane/85 AKI (89 RON) gasoline is acceptable.
To remain emissions compliant, high altitude adjust-
ment is required. Operation without this adjustment will
cause decreased performance, increased fuel con-
sumption, and increased emissions. See an authorized
Briggs & Stratton Dealer for high altitude adjustment
information.
Operation of the engine at altitudes below 2,500 feet
(762 meters) with the high altitude adjustment is not
recommended.
Starting the Mower
WARNING
POISONOUS GAS HAZARD. Engine exhaust contains carbon
monoxide, a poisonous gas that could kill you in minutes. You
CANNOT see it, smell it, or taste it. Even if you do not smell
exhaust fumes, you could still be exposed to carbon monox-
ide gas. If you start to feel sick, dizzy, or weak while using this
product, shut it off and get to fresh air RIGHT AWAY. See a
doctor. You may have carbon monoxide poisoning.
Operate this product ONLY outside far away from windows, doors and
vents to reduce the risk of carbon monoxide gas from accumulating and
potentially being drawn towards occupied spaces.
Install battery-operated carbon monoxide alarms or plug-in carbon
monoxide alarms with battery back-up according to the manufacturer’s
instructions. Smoke alarms cannot detect carbon monoxide gas.
DO NOT run this product inside homes, garages, basements, crawlspac-
es, sheds, or other partially-enclosed spaces even if using fans or open-
ing doors and windows for ventilation. Carbon monoxide can quickly
build up in these spaces and can linger for hours, even after this product
has shut off.
ALWAYS place this product downwind and point the engine exhaust
away from occupied spaces.
The engine on your mower is equipped with the Briggs
& Stratton Ready Start
TM
System. This features a
temperature-controlled automatic choke. No additional
steps are required to start a cold engine.
1. Move the engine speed control (A, Figure 3, if
equipped) to the fast (‘Rabbit’) position.
2. Squeeze the blade control (B) against the handle.
3. Start the mower:
Manual Start Models: Pull the rope start handle
(C) to crank the engine.
Electric Start Models: Insert the key (D) into the
electric start switch. Turn the key to crank the
engine. Use short starting cycles, five seconds
maximum, and wait 1 minute between starting
cycles.
4. To stop the engine (and blade), release the blade
control.
5. After the engine starts, allow a brief warm-up until
the engine runs smooth before beginning mower
operation.
C
Figure 3: Starting the mower
B
D
A
Propelling the Mower
1. Start the mower.
2. Move the ground speed control (A, Figure 4) to
the desired speed position.
3. Squeeze the wheel drive control (B) against the
handle to engage the wheel drive and propel the
mower forward. Forward speed can be adjusted
while the mower is moving by changing the posi-
tion of the ground speed control.
Operation
Not for
Reproduction
13
B
Figure 4: Mower drive controls
A
Stopping the Mower
1. Stop forward motion of the mower by releasing the
wheel drive control.
2. Stop the engine and blade by releasing the blade
control.
3. Electric Start Models: Remove the key from the
electric start switch.
Handle Height Adjustment
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
The height of the mower handle can be adjusted as fol-
lows:
1. Loosen the lower nuts (A, Figure 5) on each
lower handle.
2. Move the handle assembly (B) up or down until
the desired position is achieved.
3. Tighten the lower nuts on each lower handle to
maintain the desired position.
Figure 5: Adjusting the handle height
B
A
Cutting Height Adjustment
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Pull the height adjusting latch (A, Figure 6) out-
ward and move to the desired cutting height.
Figure 6: Adjusting cutting height
A
2. Set all wheels at the same cutting height. The
highest cutting position is Notch 7 (Figure 7). The
lowest cutting position is Notch 1.
4.00 in
10,16 cm
1.25 in
3,18 cm
Figure 7: Cutting height settings (approximate)
Operation
en
Not for
Reproduction
www.snapper.com14
Mulching Operation
For best mulching results, cut up to a maximum of 1/3
of grass blade length and recycle ONLY when grass is
dry.
1. Set all wheels in the highest cutting position (Notch
7). Refer to the Section entitled “Cutting Height
Adjustment”.
2. Move the engine speed control to the fast (Rabbit)
position.
3. Move the ground speed control to the slowest
speed setting.
4. Proceed mowing slowly. If the grass is very dense,
lower each rear wheel latch one notch lower than
the front wheel latches to improve mulching perfor-
mance.
NOTE: The mulching cover should remain on the
machine at all times, unless alternate discharge opera-
tions are desired, such as side discharging or bagging.
Removing the Mulching Cover
(Optional Accessory on Some Models)
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Remove the knob nuts (A, Figure 8) and inter-
nal/external tooth lock washers (B) securing the
mulching cover (C) to the mower deck.
2. Remove the cover.
Figure 8: Removing the mulching cover
A
C
B
Installing the Discharge
Deflector
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Remove the mulching cover. Refer to the Section
entitled “Mulching Operation”.
2. Install the deflector (A, Figure 9) to the deck in
place of the mulching cover, making sure that:
The front hole (B) on the outside front of the
deflector fits over the stud where the front of the
mulching cover was originally secured;
The slot (C) on top of the deflector slips under the
restraining nut on top of the deck (under the right
front corner of the engine);
The slot (D) on the inside rear of the deflector
slips onto the stud behind the rear of the discharge
opening, where the rear of the mulching cover was
originally secured.
3. Install the internal/external tooth lock washers and
knob nuts onto the studs and tighten securely.
Figure 9: Installing the discharge deflector
B
A
C
D
WARNING
DO NOT operate without entire Grass Catcher or
guard in place. Grass Catcher components are
subject to deterioration during normal use. Inspect
frequently and replace worn or damaged components
immediately.
!
!
Operation
Not for
Reproduction
15
Installing the Grass Bag
Adapter
(Optional Accessory on Some Models)
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Remove the mulching cover. Refer to the Section
entitled “Mulching Operation”.
2. Install the adapter (A, Figure 10) to the deck in
place of the mulching cover, making sure that:
The front hole (B) on the outside front of the adapt-
er fits over the stud where the front of the mulching
cover was originally secured;
The slot (C) on top of the adapter slips under the
restraining nut on top of the deck (under the right
front corner of the engine);
The slot (D) on the rear of the adapter slips onto
the stud behind the rear of the discharge opening,
where the rear of the mulching cover was originally
secured.
3. Install the internal/external tooth lock washers and
knob nuts onto the studs and tighten securely.
4. Route the recoil rope around the outside of the
rope guide pulley (E).
NOTE: The recoil rope may need to be slackened.
Refer to the section entitled “Starting the Mower”.
Figure 10: Installing the grass bag adapter
B
D
A
E
C
Installing the Mulching Plug
(Optional Accessory on Some Models)
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Install the mulching plug (A, Figure 11) if mulching
is desired after the bag adapter is installed. Install
the mulching plug completely and securely into the
bag adapter (B).
2. Install the grass bag as a safeguard and to further
secure the mulching plug.
WARNING
Install the grass bag when using the mulching plug.
Failure to do so may result in personal injury or death.
!
!
3. Refer to the Section entitled “Mulching Operation”.
Figure 11: Installing the mulching plug
B
A
Operation
en
Not for
Reproduction
www.snapper.com16
Installing the Grass Bag
(Optional Accessory on Some Models)
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Install the grass bag adapter. Refer to the Section
entitled “Installing the Grass Bag Adapter”.
2. Install the grass bag by sliding the connector (A,
Figure 12) over the adapter flange.
3. Attach the grass bag hooks (B) over the middle
handle cross bar.
Figure 12: Installing the grass bag
B
A
WARNING
Grass Catcher bags are made of woven fabric, and
are subject to deterioration and wear during normal
usage. Check condition of bag before each use.
Immediately replace worn or damaged catcher bags
with only genuine replacement bags. The grass
catcher is optional equipment on some models.
!
!
Charging the Battery
(Optional Accessory on Some Models)
The battery provided with your mower is sealed and
maintenance-free. It requires no special care other
than keeping it properly charged. Use only the charger
provided with your mower when charging the battery.
Charge the battery after each use, and if the battery
has been stored for longer than 30 days. The time
required to charge the battery varies, but typically 16 to
24 hours will be suffcient to bring the battery to a fully
charged condition.
1. Remove the dust cap from the charger jack (A,
Figure 13).
2. Plug the battery charger (B) into the charger jack.
3. Plug the charger into a 120-volt wall outlet.
4. Charge the battery for a period of 16 to 24 hours.
(Longer periods will not damage the battery.)
5. Unplug the charger from the wall outlet.
6. Unplug the charger from the charger jack.
7. Replace the dust cap onto the charger jack.
Figure 13: Charging the battery
B
A
WARNING
AVOID SERIOUS INJURY AND PROPERTY DAMAGE.
DO NOT attempt to charge this battery with automotive or
‘Boost’ chargers. DO NOT attempt to jump start a mower
that has a dead battery. Always use the charger supplied
with this mower to charge this battery.
! !
Operation
Not for
Reproduction
17
Maintenance
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool. Wear heavy leather gloves when
handling or working around cutting blades. Blades are
extremely sharp and can cause severe injury.
!
!
Maintenance Chart
MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off mower
Every 25 Hours or Annually *
Check mower for loose hardware
See Dealer Annually to
Lubricate mower
Check mower blade **
Check mower blade stopping time
Check drive belt
Clean battery and cables
* Whichever comes first
**Check blade more often in regions with sandy soils
or high dust conditions.
* Whichever comes first
**Clean more often in dusty conditions or when
airborne debris is present.
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or Annually *
Clean engine air filter and pre-cleaner (if equipped)
**
Every 50 Hours or Annually *
Change engine oil
Replace oil filter (if equipped)
Annually
Replace air filter
Replace pre-cleaner (if equipped)
See Dealer Annually to
Inspect muffler and spark arrester (if equipped)
Replace spark plug
Replace fuel filter (if equipped)
Clean engine air cooling system
Emissions Control
Maintenance, replacement, or repair of the emissions
control devices and systems may be performed by any
non-road engine repair establishment or individual.
However, to obtain “no charge” emissions control ser-
vice, the work must be performed by a factory autho-
rized dealer. See the Emissions Warranty.
en
Not for
Reproduction
www.snapper.com18
Maintenance
Change Engine Oil
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool.
!
!
1. Drain the fuel tank completely.
2. Remove the dipstick (A, Figure 14), then turn the
mower on its side. Allow the oil to drain from the oil
fill tube into an appropriate container. Dispose of
used oil properly.
3. Place the mower upright, then fill the engine with
engine oil to the ‘full’ mark on the dipstick. Refer
to the section entitled ‘Oil Recommendations’. Do
not overfill.
Figure 14: Draining the engine oil
A
B
IMPORTANT: Drain the fuel tank before tipping the
machine. DO NOT tip the machine with the carburetor
or spark plug down. Oil from the crankcase will satu-
rate the air filter and cause the engine to be hard to
start or not start at all. If contamination does occur, the
air filter will have to be replaced.
Change Oil Filter (if equipped)
1. Drain the oil from the engine. Refer to the section
entitled ‘Change Engine Oil’.
2. Remove the oil filter (B, Figure 14) and dispose of
properly.
3. Before you install the new oil filter, lightly lubricate
the oil filter gasket with fresh, clean oil.
4. Install the oil filter by hand until the gasket contacts
the oil filter adapter, then tighten the oil filter 1/2 to
3/4 turns.
5. Add oil. Refer to the section entitled ‘Change
Engine Oil.’.
6. Start and run the engine. As the engine warms up,
check for oil leaks.
7. Stop the engine and check the oil level. It should
be at the top of the full indicator on the dipstick.
Service Air Filter
WARNING
Never start or run the engine with the air cleaner
assembly (if equipped) or the air filter (if equipped)
removed.
!
!
NOTE: Do not use pressurized air or solvents to clean
the filter. Pressurized air can damage the filter and
solvents will dissolve the filter.
1. Remove the fastener (A, Figure 15) and the air
filter cover (B).
2. Remove the pre-cleaner (C) and the filter (D).
3. To loosen debris, gently tap the filter on a hard sur-
face. If the filter is excessively dirty, replace with a
new filter.
4. Wash the pre-cleaner in liquid detergent and
water. Then allow it to thoroughly air dry. Do not oil
the pre-cleaner.
5. Assemble the dry pre-cleaner to the filter.
6. Install the filter and pre-cleaner into the base (E).
Make sure filter fits securely in the base.
7. Install air filter cover and secure with fastener.
Make sure the fastener is tight.
Figure 15: Air filter and pre-cleaner
A
B
E
C
D
Not for
Reproduction
19
Maintenance
Check Safety Interlock System
1. Start the mower.
2. Release the blade control. The engine must stop
within 3 seconds.
If the engine does not stop within 3 seconds, do not
use the mower. Bring the mower to an authorized
dealer for service.
Clean Debris Off Mower
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool. Wear heavy leather gloves when
handling or working around cutting blades. Blades are
extremely sharp and can cause severe injury.
!
!
1. Clean dirt and debris from the top of the mower
deck.
2. Clean any debris buildup on or around the engine,
etc.
While cleaning, check components for wear or dam-
age. Replace worn or damaged components immedi-
ately.
Storage Procedure
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool. Wear heavy leather gloves when
handling or working around cutting blades. Blades are
extremely sharp and can cause severe injury.
!
!
Prepare the mower for “end of season” storage as fol-
lows:
1. Disconnect the spark plug wire and secure away
from the spark plug.
2. Drain the fuel tank and let the engine run until all
fuel is out of the carburetor.
NOTE: If using a fuel stabilizer, there is no need to
drain the fuel tank. Refer to the section entitled ‘Fuel
System’.
3. Use a brush or compressed air to remove loose
debris, then use a damp cloth to wipe down the
unit.
4. Tilt the mower up on its rear wheels and inspect
the underside of the deck. (Do not tilt the mower
with the spark plug or carburetor down.) Scrape
away stubborn accumulation of grass with a putty
knife and/or wire brush.
5. Lubricate all exposed metal with a light coating of
oil to prevent corrosion.
6. Carefully fold the handles, flexing the control
cables to prevent cable damage.
7. Store the mower in a shed or other dry area, pro-
tected from weather.
Fuel System
Fuel can become stale when stored over 30 days.
Stale fuel causes acid and gum deposits to form in
the fuel system or on essential carburetor parts. To
keep fuel fresh, use Briggs & Stratton
®
Advanced
Formula Fuel Treatment & Stabilizer, available
wherever Briggs & Stratton genuine service parts are
sold.
For engines equipped with a FRESH START
®
fuel
cap, use Briggs & Stratton FRESH START
®
avail-
able in a drip concentrate cartridge.
There is no need to drain gasoline from the engine
if a fuel stabilizer is added according to instructions.
Run the engine for 2 minutes to circulate the stabilizer
throughout the fuel system before storage.
If gasoline in the engine has not been treated with a
fuel stabilizer, it must be drained into an approved con-
tainer. Run the engine until it stops from lack of fuel.
The use of a fuel stabilizer in the storage container is
recommended to maintain freshness.
en
Not for
Reproduction
www.snapper.com20
Maintenance
Service
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all
components to cool. Wear heavy leather gloves when
handling or working around cutting blades. Blades are
extremely sharp and can cause severe injury.
!
!
Check Grease Level in Transmission
1. Remove the transmission fill plug (A, Figure 16).
Roll the machine forward or backward while look-
ing down into the plug hole.
2. If liquid grease is not visible on the input gear (the
small gear below the plug hole), add an amount, to
cover the gear, of Snapper “00” grease.
Figure 16: Removing the transmission fill plug
A
NOTE: Snapper “00” grease (Part No. 7029443) is
available at your dealer.
NOTE: Do not spill grease or oil onto the surface of the
drive disc (A, Figure 17).
Figure 17: Location of the drive disc
A
3. Reinstall the transmission plug.
4. Check the grease level after each 25 hours of
operation.
Check Mower Blade
1. Disconnect the spark plug wire and secure the end
away from the plug.
2. Tilt the mower up on its rear wheels for access to
the blade cap screw (A, Figure 18). Do not tilt the
mower with the spark plug or carburetor down.
IMPORTANT: Drain the fuel tank before tipping the
mower. DO NOT tip the machine with the carburetor or
spark plug down. Oil from the crankcase will saturate
the air filter and cause the engine to be hard to start or
not start at all. If contamination does occur, the air filter
will have to be replaced.
3. Check the torque of the blade cap screw.
Recommended torque should be 40 lb-ft (54 N.m).
4. Check the blade for sharpness, wear and damage.
Refer to the Section entitled “Blade Wear Limits”.
Figure 18: Tightening the blade cap screw
A
Check Engine Drive Belt
Visually check the engine drive belt for cracking,
fraying, severed or exposed belt strands. If worn
or damaged, replace the belt before operating the
mower.
Check Transmission Poly-V Belt
Visually check the poly-v belt for cracking, fray-
ing, severed or exposed belt strands. If worn or
damaged, replace the belt before operating the
mower.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Simplicity 7800969-00 Manuel utilisateur

Catégorie
Tondeuses à gazon
Taper
Manuel utilisateur
Ce manuel convient également à