Simplicity WALK MOWER, CONS CORE, MY15, DOM Manuel utilisateur

Not for

Reproduction

21” Series 20 Steel Deck Walk Mowers

80013251USCN

Revision A

Operator's Manual

Manual del operador

Manuel d'utilisation

Models Covered

7800946-01

7800947-01

7800969-00

7800970-00

en

es

fr

Not for

Reproduction

Thank You for purchasing this quality-built Snapper mower. We’re pleased that you placed your confidence in the

Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper mower

will provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with the

machine and how to avoid them. This machine is designed and intended only for finish cutting of established

lawns and is not intended for any other purpose. It is important that you read and understand these instructions

thoroughly before attempting to start or operate this equipment. Save these original instructions for future ref-

erence.

Date of Purchase___________________________________________________________________________

Retailer___________________________________________________________________________________

Retailer’s Phone Number_____________________________________________________________________

Equipment

Model Number_______________________________________________________________________

Serial Number_______________________________________________________________________

Engine

Model________________________Type_______________________Code______________________

Not for

Reproduction

3

Table of Contents

Operator Safety ................................................................................................4

Features and Controls ...................................................................................10

Operation ........................................................................................................11

Before Starting ...........................................................................................11

Oil Recommendations ................................................................................11

Fuel Recommendations .............................................................................12

Starting the Mower .....................................................................................12

Propelling the Mower .................................................................................12

Stopping the Mower ...................................................................................13

Handle Height Adjustment .........................................................................13

Cutting Height Adjustment .........................................................................13

Mulching Operation .................................................................................... 14

Installing the Discharge Deflector ...............................................................14

Installing the Grass Bag .............................................................................15

Charging the Battery ..................................................................................16

Maintenance ...................................................................................................17

Maintenance Chart ..................................................................................... 17

Change Engine Oil .....................................................................................18

Change Oil Filter (if equipped) ...................................................................18

Service Air Filter ......................................................................................... 18

Check Safety Interlock System ..................................................................19

Clean Debris Off Mower ............................................................................. 19

Storage Procedure .....................................................................................19

Service .......................................................................................................20

Troubleshooting .............................................................................................28

Warranties ....................................................................................................... 29

Slope Guide ....................................................................................................31

WARNING

Battery posts, terminals and related accessories

contain lead and lead compounds, chemicals known

to the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands

after handling.

!

WARNING

Engine exhaust, some of its constituents, and certain

vehicle components contain or emit chemicals known

to the State of California to cause cancer or other

reproductive harm.

!

WARNING

It is a violation of California Public Resource Code,

Section 4442, to use or operate the engine on any

forest-covered, brush-covered, or grass-covered land

unless the exhaust system is equipped with a spark

arrester, as defined in Section 4442, maintained in

effective working order. Other states or federal juris-

dictions may have similar laws. Contact the original

equipment manufacturer, retailer, or dealer to obtain

a spark arrester designed for the exhaust system

installed on this engine.

!

en

Not for

Reproduction

www.snapper.com4

Operator Safety

Operating Safety

Power equipment is only as safe as the operator. If it is misused, or

not properly maintained, it can be dangerous! Remember, you are

responsible for your safety and that of those around you.

Use common sense, and think through what you are doing. If you are

not sure that the task you are about to perform can be safely done

with the equipment you have chosen, ask a professional: contact your

local authorized dealer.

Read the Manual

The operator’s manual contains important safety information you need to

be aware of BEFORE you operate your unit as well as DURING operation.

Safe operating techniques, an explanation of the product’s features and

controls, and maintenance information is included to help you get the

most out of your equipment investment.

Be sure to completely read the Safety Rules and Information found on the

following pages. Also completely read the Operation section.

Children

Tragic accidents can occur with children. Do not allow them any-

where near the area of operation. Children are often attracted to the

unit and mowing activity. Never assume that children will remain

where you last saw them. If there is a risk that children may enter

the area where you

are mowing,

have another responsible adult

watch them.

Slope Operation

You could be seriously injured or even killed if you use this unit on

too steep an incline. Using the unit on a slope that is too steep or

where you don’t have adequate footing or traction can cause you to

lose control or slip and fall.

You should not operate on inclines with a slope greater than 10

degrees, which is a 3.5 ft (1,5 m) rise over 20.0 ft (6,0 m). Always

mow across slopes, never up and down.

Also note that the surface you are mowing can greatly impact con-

trol. Wet grass or leaves can seriously affect your footing and trac-

tion on a slope.

If you feel unsure about operating the unit on an incline, don’t do it.

It’s not worth the risk.

20.0 ft

(6,0 m)

3.5 ft

(1,5 m)

Operating Safety

Power equipment is only as safe as the operator. If it is misused,

or not properly maintained, it can be dangerous! Remember, you

are responsible for your safety and that of those around you.

Use common sense, and think through what you are doing. If you

are not sure that the task you are about to perform can be safely

done with the equipment you have chosen, ask a professional:

contact your local authorized dealer.

Read the Manual

The operator’s manual contains important safety information you

need to be aware of BEFORE you operate your unit as well as

DURING operation.

Safe operating techniques, an explanation of the product’s features

and controls, and maintenance information is included to help you

get the most out of your equipment investment.

Be sure to completely read the Safety Rules and Information found

on the following pages. Also completely read the Operation section.

Children

Tragic accidents can occur with children. Do not allow them

anywhere near the area of operation. Children are often

attracted to the unit and mowing activity. Never assume that

children will remain where you last saw them. If there is a

risk that children may enter the area where you are mowing,

have another responsible adult watch them.

Slope Operation

You could be seriously injured or even killed if you use this

unit on too steep an incline. Using the unit on a slope that is

too steep or where you don’t have adequate footing or trac-

tion can cause you to lose control or slip and fall.

You should not operate on inclines with a slope greater than

10 degrees, which is a 3.5 ft (1,5 m) rise over 20.0 ft (6,0 m).

Always mow across slopes, never up and down.

Also note that the surface you are mowing can greatly

impact control. Wet grass or leaves can seriously aect your

footing and traction on a slope.

If you feel unsure about operating the unit on an incline,

don’t do it. It’s not worth the risk.

3.5 ft

(1,5 m)

20.0 ft

(6,0 m)

Not for

Reproduction

5

Operator Safety

Moving Parts

This equipment has moving parts that can injure you or someone else.

However, if you stand behind the handle properly and follow all the rules in

this book, the unit is safe to operate.

The mower deck has a spinning mower blade that can amputate hands and

feet. Do not allow anyone near the equipment while it is running!

To help you, the operator, use this equipment safely, it is equipped with an

operator present safety system. Do NOT attempt to alter or bypass the sys-

tem. See your dealer immediately if the system does not pass all the safety

interlock system tests found in this manual.

Thrown Objects

This unit has a spinning mower blade. This blade can pick up and

throw debris that could seriously injure a bystander. Be sure to clean

up the area to be mowed BEFORE you start mowing.

Do not operate this unit without the entire grass catcher or discharge

guard (deflector) in place.

Also, do not allow anyone in the area while the unit is running! If

someone does enter the area, shut the unit off immediately until they

leave.

Debris Accumulation

Accumulation of grass and debris can result in a fire. Be sure to clean any

accumulation of

grass and debris with a brush or compressed air, before

and after operation.

Fuel and Maintenance

Gasoline is extremely flammable. Its vapors are also extremely flam-

mable and can travel to distant ignition sources. Gasoline must only

be used as a fuel, not as a solvent or cleaner. It should never be

stored any place where its vapors can build up or travel to an ignition

source like a pilot light. Fuel belongs in an approved, plastic, sealed

gas can, or in the tractor fuel tank with the cap securely closed.

Spilled fuel needs to be cleaned up immediately.

Proper maintenance is critical to the safety and performance of your

unit. Be sure to perform the maintenance procedures listed in this

manual, especially periodically testing the safety system.

Moving Parts

This equipment has moving parts that can injure you or someone

else. However, if you stand behind the handle properly and follow all

the rules in this book, the unit is safe to operate.

The mower deck has a spinning mower blade that can amputate

hands and feet. Do not allow anyone near the equipment while it is

running!

To help you, the operator, use this equipment safely, it is equipped

with an operator present safety system. Do NOT attempt to alter or

bypass the system. See your dealer immediately if the system does

not pass all the safety interlock system tests found in this manual.

Thrown Objects

This unit has a spinning mower blade. This blade can pick up and

throw debris that could seriously injure a bystander. Be sure to clean

up the area to be mowed BEFORE you start mowing.

Do not operate this unit without the entire grass catcher or dis-

charge guard (deector) in place.

Also, do not allow anyone in the area while the unit is running! If

someone does enter the area, shut the unit o immediately until

they leave.

Debris Accumulation

Accumulation of grass and debris can result in a re. Be sure

to clean any accumulation of grass and debris with a brush or

compressed air, before and after operation.

Fuel and Maintenance

Gasoline is extremely ammable. Its vapors are also extremely

ammable and can travel to distant ignition sources. Gasoline

must only be used as a fuel, not as a solvent or cleaner. It

should never be stored any place where its vapors can build

up or travel to an ignition source like a pilot light. Fuel belongs

in an approved, plastic, sealed gas can, or in the tractor fuel

tank with the cap securely closed. Spilled fuel needs to be

cleaned up immediately.

Proper maintenance is critical to the safety and performance

of your unit. Be sure to perform the maintenance procedures

listed in this manual, especially periodically testing the safety

system.

en

Not for

Reproduction

www.snapper.com6

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects

that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in

serious injury or death to the operator or other persons. The owner of the machine must understand these

instructions and must allow only persons who understand these instructions to operate machine. Each

person operating the machine must be of sound mind and body and must not be under the influence of any

substance, which might impair vision, dexterity or judgment.

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to

the presence of children. Children are often attracted to

the machine and the mowing activity. Never assume that

children will remain where you last saw them.

1. KEEP children out of the mowing area and under the

watchful care of a responsible adult other than the oper-

ator.

2. DO NOT allow children in yard when machine is oper-

ated and turn machine OFF if anyone enters the area.

3. DO NOT allow pre-teenage children to operate machine.

4. ALLOW only responsible adults & teenagers with mature

judgment under close adult supervision to operate

machine.

5. DO NOT pull mower backwards unless absolutely

necessary. LOOK and SEE behind and down for chil-

dren, pets and hazards before and while backing.

6. USE EXTRA CARE when approaching blind corners,

shrubs, trees, or other objects that may obscure vision.

SLOPE OPERATION

1. Slopes are a major factor related to slip and fall acci-

dents, which can result in severe injury. All slopes

require extra caution. If you feel uneasy on a slope, DO

NOT mow it.

2. Mow across slopes, never up-and-down. Exercise

extreme CAUTION when changing directions on slopes.

DO NOT mow steep slopes or other areas where stabil-

ity or traction is in doubt. Refer to the Slope Guide at the

back of this manual.

3. Use extra care with grass catchers or other attach-

ments; these affect the handling and the stability of the

machine.

PREPARATION

1. Read, understand, and follow instructions and warnings

in this manual and on the mower, engine and attach-

ments. Know the controls and the proper use of the

mower before starting.

2. Only mature, responsible persons shall operate the

machine and only after proper instruction.

3. Data indicates that operators age 60 and above, are

involved in a large percentage of mower-related injuries.

These operators should evaluate their ability to operate

the mower safely enough to protect themselves and oth-

ers from serious injury.

4. Handle fuel with extra care. Fuels are flammable and

vapors are explosive. Use only an approved fuel con-

tainer. DO NOT remove fuel cap or add fuel with engine

running. Add fuel outdoors only with engine stopped and

cool. Clean spilled fuel and oil from machine. DO NOT

smoke.

5. Check the area to be mowed and remove all objects

such as toys, wire, rocks, limbs and other objects that

could cause injury if thrown by blade or interfere with

mowing. Also note the location of holes, stumps, and

other possible hazards.

6. Keep people and pets out of the mowing area.

Immediately, STOP Blade, Stop engine and Stop mower

if anyone enters the area.

7. Check shields, deflectors, switches, blade controls and

other safety devices frequently for proper operation and

location.

8. Make sure all safety decals are clearly legible. Replace if

damaged.

9. Protect yourself when mowing and wear safety glasses,

long pants and substantial footwear. DO NOT mow

barefooted or with sandals.

10. Know how to STOP blade and engine quickly in

preparation for emergencies.

11. Use extra care when loading or unloading the machine

into a trailer or truck.

12. Check grass catcher components frequently for signs of

wear or deterioration and replace as needed to prevent

injury from thrown objects going through weak or torn

spots.

Operator Safety

!

WARNING

POISONOUS GAS HAZARD. Engine exhaust contains carbon

monoxide, a poisonous gas that could kill you in minutes. You

CANNOT see it, smell it, or taste it. Even if you do not smell

exhaust fumes, you could still be exposed to carbon monox-

ide gas. If you start to feel sick, dizzy, or weak while using this

product, shut it off and get to fresh air RIGHT AWAY. See a

doctor. You may have carbon monoxide poisoning.

• Operate this product ONLY outside far away from windows, doors and

vents to reduce the risk of carbon monoxide gas from accumulating and

potentially being drawn towards occupied spaces.

• Install battery-operated carbon monoxide alarms or plug-in carbon

monoxide alarms with battery back-up according to the manufacturer’s

instructions. Smoke alarms cannot detect carbon monoxide gas.

• DO NOT run this product inside homes, garages, basements, crawlspac-

es, sheds, or other partially-enclosed spaces even if using fans or open-

ing doors and windows for ventilation. Carbon monoxide can quickly

build up in these spaces and can linger for hours, even after this product

has shut off.

• ALWAYS place this product downwind and point the engine exhaust

away from occupied spaces.

Not for

Reproduction

7

SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme

care in handling gasoline. Gasoline is extremely flammable

and the vapors are explosive.

1. Extinguish all cigarettes, cigars, pipes and other sources

of ignition.

2. Use only an approved fuel container.

3. DO NOT remove fuel cap or add fuel with the engine

running. Allow the engine to cool before refueling.

4. DO NOT refuel the machine indoors.

5. DO NOT store the machine or fuel container inside

where there is an open flame, spark or pilot light such as

on a water heater or other appliances.

6. DO NOT fill fuel containers inside a vehicle or on a

truck or trailer bed with a plastic liner. Always place the

containers on the ground away from the vehicle before

filling.

7. Remove gas-powered equipment from the vehicle or

trailer and refuel it on the ground. If this is not possible,

then refuel equipment using a portable container, rather

than a gasoline dispenser nozzle.

8. DO NOT start gas powered equipment in enclosed

vehicles or trailers.

9. Keep the nozzle in contact with the rim of the fuel tank or

container opening at all times until fueling is complete.

DO NOT use a nozzle lock-open device

10. If fuel is spilled on clothing, change clothing immedi-

ately.

11. DO NOT overfill a fuel tank. Replace fuel cap and tight-

en securely.

OPERATION

1. DO NOT put hands or feet near or under rotating parts.

Keep clear of discharge area while engine is running.

2. STOP engine when crossing gravel drives, walks, or

roads, and under any conditions where thrown objects

might be a hazard.

3. Mow only in daylight or good artificial light.

4. DO NOT operate mower while under the influence of

alcohol or drugs.

5. After striking a foreign object or if mower vibrates

abnormally, STOP the engine, disconnect and secure

spark plug wire. Inspect the mower for any damage and

repair the damage before starting.

6. DO NOT mow near drop offs, ditches or embankments.

Operator could lose footing or balance.

7. STAY ALERT for holes and other hidden hazards. Tall

grass can hide obstacles. Keep away from ditches,

washouts, culverts, fences and protruding objects.

8. DO NOT mow on wet grass. Always be sure of your

footing. Keep a firm hold on the handle and walk, never

run. Slipping could cause injury.

9. ALWAYS stay behind handle when engine (motor) is

running.

10. DO NOT leave the machine with the engine running.

STOP BLADE and STOP ENGINE before leaving the

operators position for any reason.

11. Before cleaning, repairing or inspecting make certain

engine, blade and all moving parts have STOPPED.

Disconnect and secure spark plug wire away from plug

to prevent accidental starting.

12. STOP engine and wait until the blade comes to com-

plete STOP before removing grass bag and/or clearing

grass.

13. DO NOT operate mower without the entire grass catch-

er, rear guard, or other safety devices in place and work-

ing. DO NOT point discharge at people, passing cars,

windows or doors.

14. DO NOT discharge material against a wall or obstruc-

tion. Material may ricochet back towards the operator.

15. Slow down before turning.

16. Watch out for traffic when near or crossing roadways.

17. DO NOT operate engine in enclosed areas. Engine

exhaust gases contain carbon monoxide, a deadly poi-

son.

18. Only use accessories approved by the manufacturer.

See manufacturer’s instructions for proper operation and

installation of accessories.

MAINTENANCE AND STORAGE

1. DO NOT store mower or fuel container inside where

fumes may reach an open flame, spark or pilot light such

as in a water heater, furnace, clothes dryer or other gas

appliance. Allow engine to cool before storing machine

in an enclosure. Store fuel container out of reach of chil-

dren in a well ventilated, unoccupied building.

2. Keep mower and engine free of grass, leaves or excess

grease to reduce fire hazard and engine overheating.

3. When draining fuel tank, drain fuel into an approved

container outdoors and away from open flame.

4. Keep all bolts, especially blade bolts, nuts and screws

properly tight. Check that all cotter pins are in proper

position.

5. Always provide adequate ventilation when running

engine. Engine exhaust gases contain carbon monoxide,

a deadly poison.

6. Service engine and make adjustments only when engine

is stopped. Removed spark plug wire from spark plug

and secure wire away from spark plug to prevent acci-

dental starting.

7. DO NOT change engine governor speed settings or

overspeed engine.

8. Check grass bag assembly frequently for wear or dete-

rioration to avoid thrown objects and exposure to mov-

ing parts. Replace with new bag if loose seams or tears

are evident. Replace slider or bag adapter if broken or

cracked.

9. Mower blades are sharp and can cut. Wrap the blades

or wear heavy leather gloves and use CAUTION when

handling them.

10. DO NOT test for spark by grounding spark plug next

to spark plug hole; spark plug could ignite gas exiting

engine.

11. Have machine serviced by an authorized dealer at least

once a year and have the dealer install any new safety

devices.

12. Use only factory authorized replacement parts or like

parts when making repairs.

Operator Safety

en

Not for

Reproduction

www.snapper.com8

Operator Safety

Safety and Operation Decals

Reading this manual and the safety instructions it con-

tains will provide the basic knowledge necessary to

operate this mower safely and effectively. However,

several safety and operation decals have also been

placed on the mower as a reminder of this important

information during operation.

The decals noted below are located on the mower.

The safety warnings and operation instructions they

contain should be carefully read, understood, and fol-

lowed. Not following these important warnings and

instructions can result in serious bodily injury or

death.

If any of these decals are lost or damaged, replace

them immediately. Contact your dealer for replacement

decals.

Keep Hands and Feet Away

Part No. 7105261

Warning/Danger

Part No. 7106303

Warning - Spark Arrestor

Part No. 7106305

Engine Speed Control

Part No. 7075532

Drive Control

Part No. 7028407

Ground Speed Control

Part No. 7075471

OPC (Blade Control)

Part No. 7029782

7105261

7075471

AMPUTATION AND THROWN

OBJECT HAZARD

• Keep hands and feet away from deck.

• Do not operate mower unless

discharge chute or entire

grass catcher is in its proper place.

• Read operator’s manual.

• Keep safety devices (guards, shields,

switches, etc.) in place and working.

• Go across slopes, not up or down.

• Remove objects that could be thrown

by blade.

• Do not mow when children or

others are around.

• Look down and behind before and

while moving backwards.

• Wait at least 2 minutes before refueling.

AVOID SERIOUS INJURY OR DEATH

• Lire le manuel d’utilisation.

• Maintenir en place et en état de marche les

dispositifs de sécuri

té (protections, écrans,

commutateurs, etc.).

• Passer latéralment sur les pentes, pas en montant ou

descendant.

• Enlever les objets qui peuvent être projetés par la lame.

• Ne pas tondre s’il y a des enfants ou des badauds aux

alentours.

• Regarder en bas et derrière avant et pendant une marche arrière.

• Patienter au moins 2 minutes avant de refaire le plein.

POUR ÉVITER DES BLESSURES GRAVES

VOIRE MORTELLES

• Garder mains et pieds à l’écart de la plate-forme de coupe.

• Ne pas utiliser la tondeuse si le déversoir ou tout le bac à herbe

pas bien en place.

RISQUE D’AMPUTATION ET

OBJETS PROJÉTES

WARNING

AVERTISSEMENT

DANGER

7106303

AVERTISSEMENTWARNING

7106305

Risque d’incendie. Ce matériel peut produire

des étincelles et démarrer des feux de

broussailles. Un pare-étincelles peut s’avérer

nécessaire. Contactez les organismes locaux

de lutte contre les incendies pour obtenir les

règlementations concernant les exigences de

prévention incendie.

Fire Hazard. Operation of this equipment

may create sparks that can start fires around

dry vegetation. A spark arrestor may be

required. The operator should contact local

fire agencies for laws or regulations relating

to fire prevention requirements.

7075532

Danger

Part No. 7106304

DANGER

• Garder mains et pieds à l’écart de la

plate-forme de coupe.

• Ne pas utiliser la tondeuse si le déversoir

ou tout le bac à herbe pas bien en place.

RISQUE D’AMPUTATION ET OBJETS PROJÉTES

7106304

AMPUTATION AND THROWN OBJECT HAZARD

• Keep hands and feet away from deck.

• Do not operate mower unless discharge

chute or entire grass catcher is in its

proper place.

Not for

Reproduction

9

Operator Safety

Explanation of Safety Decals

Explanation of Operation Decals

DANGER

• Garder mains et pieds à l’écart de la

plate-forme de coupe.

• Ne pas utiliser la tondeuse si le déversoir

ou tout le bac à herbe pas bien en place.

RISQUE D’AMPUTATION ET OBJETS PROJÉTES

7106304

AMPUTATION AND THROWN OBJECT HAZARD

• Keep hands and feet away from deck.

• Do not operate mower unless discharge

chute or entire grass catcher is in its

proper place.

7105261

7075532

7075471

AMPUTATION AND THROWN

OBJECT HAZARD

• Keep hands and feet away from deck.

• Do not operate mower unless

discharge chute or entire

grass catcher is in its proper place.

• Read operator’s manual.

• Keep safety devices (guards, shields,

switches, etc.) in place and working.

• Go across slopes, not up or down.

• Remove objects that could be thrown

by blade.

• Do not mow when children or

others are around.

• Look down and behind before and

while moving backwards.

• Wait at least 2 minutes before refueling.

AVOID SERIOUS INJURY OR DEATH

• Lire le manuel d’utilisation.

• Maintenir en place et en état de marche les

dispositifs de sécurité (protections, écrans,

commutateurs, etc.).

• Passer latéralment sur les pentes, pas en montant ou

descendant.

• Enlever les objets qui peuvent êt

re projetés par la lame.

• Ne pas tondre s’il y a des enfants ou des badauds aux

alentours.

• Regarder en bas et derrière avant et pendant une marche arrière.

• Patienter au moins 2 minutes avant de refaire le plein.

POUR ÉVITER DES BLESSURES GRAVES

VOIRE MORTELLES

• Garder mains et pieds à l’écart de la plate-forme de coupe.

• Ne pas utiliser la tondeuse si le déversoir ou tout le bac à herbe

pas bien en place.

RISQUE D’AMPUTATION ET

OBJETS PROJÉTES

WARNING

AVERTISSEMENT

DANGER

7106303

A

A CB D

B

D

B

A. OPC (Blade Control)

• Squeeze blade control to start and run engine and

blade.

• Release blade control to stop engine and blade.

B. Engine Speed Control

• Move engine speed control in direction indicated to

increase or decrease engine speed.

C. Drive Control

• Squeeze drive control against handle to engage

wheel drive.

D. Ground Speed Control

• Move ground speed control toward Fast (Rabbit)

to increase ground speed.

• Move ground speed control toward Slow (Turtle) to

decrease ground speed.

A. WARNING: Avoid Serious Injury or Death

Read the operator’s manual before attempting

to operate the mower.

Mow across slopes, not up or down.

To avoid injury to others, do not mow when

others, especially children, are around.

To reduce the potential for fire, wait at least 2

minutes before refueling.

B. DANGER: Amputation and Thrown Object Hazard.

To avoid serious injury or death, keep hands

and feet away from the mower deck at all times

during operation.

To avoid injury from thrown objects, do not

operate the mower unless all mulching, dis-

charge, or bagging components are in their

proper place.

C. WARNING: Spark Arrestor may be required.

D. DANGER: Keep Hands and Feet Away.

AVERTISSEMENTWARNING

7106305

Risque d’incendie. Ce matériel peut produire

des étincelles et démarrer des feux de

broussailles. Un pare-étincelles peut s’avérer

nécessaire. Contactez les organismes locaux

de lutte contre les incendies pour obtenir les

règlementations concernant les exigences de

prévention incendie.

Fire Hazard. Operation of this equipment

may create sparks that can start fires around

dry vegetation. A spark arrestor may be

required. The operator should contact local

fire agencies for laws or regulations relating

to fire prevention requirements.

C

en

Not for

Reproduction

www.snapper.com10

IMPORTANT

The figures and illustrations in this manual are pro-

vided for reference only and may differ from your

specific model. Contact your dealer if you have ques-

tions.

A. Mulching Cover

B. Rear Height Adjustment Latch (2)

C. Oil Fill Cap and Dipstick

D. Rope Start Handle

E. Engine Speed Control

F. Drive Control

G. Blade Control

H. Ground Speed Control

I. Fuel Filler Cap

J. Front Height Adjustment Latch (2)

C

E

I

D

A

B

F

H

J

Features and Controls

G

Not for

Reproduction

11

Before Starting

1. Check the guards, deflectors, grass bag, and cov-

ers to make sure all are in place and securely tight-

ened.

2. Check the blade control (A, Figure 1), drive con-

trol (B), and ground speed control (C) to insure

they work freely.

Figure 1: Mower controls

B

A

C

3. Check the cutting height. Adjust to the desired

height. Refer to the section entitled ‘Cutting Height

Adjustment’.

4. Check the engine oil:

• Make sure the mower is on a level surface.

• Clean the oil fill area of any debris.

• Remove the dipstick (A, Figure 2) and wipe with

a clean cloth.

• Insert and tighten the dipstick.

• Remove the dipstick and check the oil level. It

should be at the top of the full indicator (B) on the

dipstick.

• If low, add oil slowly into the engine oil fill. Refer

to the section entitled ‘Oil Recommendations’. Do

not overfill. After adding oil, wait one minute and

recheck the oil level.

• Replace and tighten the dipstick.

Figure 2: Oil and fuel fill

A

B

C

D

5. Add fuel to the tank:

• Make sure the mower is outside, where fumes

can safely dissipate.

• Remove the fuel fill cap (C, Figure 2).

• Fill the tank with fuel. Refer to the section entitled

‘Fuel Recommendations’. To allow for expansion

of the fuel, do not fill above the bottom of the filler

neck (D).

• Reinstall the fuel fill cap.

6. Clean the exterior surfaces of the cutting deck and

engine of any accumulation of spilled fuel, dirt,

grass, oil, etc. Keep the engine air intake screen

and cooling fins clear at all times.

7. Charge the battery. Refer to the section entitled

“Charging the Battery”.

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty

Certified oils for best performance. Other high-quality

detergent oils are acceptable if classified for service

SF, SG, SH, SJ or higher. Do not use special additives.

Outdoor temperatures determine the proper oil viscos-

ity for the engine. Use the chart to select the best vis-

cosity for the outdoor temperature range expected.

* Below 40°F (4°C) the use of SAE 30 will result in

hard starting.

** Above 80°F (27°C) the use of 10W-30 may cause

increased oil consumption. Check oil level more

frequently.

Operation

Synthetic 5W-30

en

Not for

Reproduction

www.snapper.com12

Fuel Recommendations

Fuel must meet these requirements:

• Clean, fresh, unleaded gasoline.

• A minimum of 87 octane/87 AKI (91 RON). High

altitude use, see below.

• Gasoline with up to 10% ethanol (gasahol) is

acceptable.

NOTICE: Do not use unapproved gasolines, such as

E15 and E85. Do not mix oil in gasoline or modify the

engine to run on alternate fuels. Use of unapproved

fuels will damage the engine components and void

the engine warranty.

To protect the fuel system from gum formation, mix a

fuel stabilizer into the fuel. See Storage. All fuel is not

the same. If starting or performance problems occur,

change fuel providers or change brands. This engine is

certified to operate on gasoline. The emissions control

system for this engine is EM (Engine Modifications).

High Altitude

At altitudes over 5,000 feet (1524 meters), a minimum

85 octane/85 AKI (89 RON) gasoline is acceptable.

To remain emissions compliant, high altitude adjust-

ment is required. Operation without this adjustment will

cause decreased performance, increased fuel con-

sumption, and increased emissions. See an authorized

Briggs & Stratton Dealer for high altitude adjustment

information.

Operation of the engine at altitudes below 2,500 feet

(762 meters) with the high altitude adjustment is not

recommended.

Starting the Mower

WARNING

POISONOUS GAS HAZARD. Engine exhaust contains carbon

monoxide, a poisonous gas that could kill you in minutes. You

CANNOT see it, smell it, or taste it. Even if you do not smell

exhaust fumes, you could still be exposed to carbon monox-

ide gas. If you start to feel sick, dizzy, or weak while using this

product, shut it off and get to fresh air RIGHT AWAY. See a

doctor. You may have carbon monoxide poisoning.

• Operate this product ONLY outside far away from windows, doors and

vents to reduce the risk of carbon monoxide gas from accumulating and

potentially being drawn towards occupied spaces.

• Install battery-operated carbon monoxide alarms or plug-in carbon

monoxide alarms with battery back-up according to the manufacturer’s

instructions. Smoke alarms cannot detect carbon monoxide gas.

• DO NOT run this product inside homes, garages, basements, crawlspac-

es, sheds, or other partially-enclosed spaces even if using fans or open-

ing doors and windows for ventilation. Carbon monoxide can quickly

build up in these spaces and can linger for hours, even after this product

has shut off.

• ALWAYS place this product downwind and point the engine exhaust

away from occupied spaces.

The engine on your mower is equipped with the Briggs

& Stratton Ready Start

TM

System. This features a

temperature-controlled automatic choke. No additional

steps are required to start a cold engine.

1. Move the engine speed control (A, Figure 3, if

equipped) to the fast (‘Rabbit’) position.

2. Squeeze the blade control (B) against the handle.

3. Start the mower:

Manual Start Models: Pull the rope start handle

(C) to crank the engine.

Electric Start Models: Insert the key (D) into the

electric start switch. Turn the key to crank the

engine. Use short starting cycles, five seconds

maximum, and wait 1 minute between starting

cycles.

4. To stop the engine (and blade), release the blade

control.

5. After the engine starts, allow a brief warm-up until

the engine runs smooth before beginning mower

operation.

C

Figure 3: Starting the mower

B

D

A

Propelling the Mower

1. Start the mower.

2. Move the ground speed control (A, Figure 4) to

the desired speed position.

3. Squeeze the wheel drive control (B) against the

handle to engage the wheel drive and propel the

mower forward. Forward speed can be adjusted

while the mower is moving by changing the posi-

tion of the ground speed control.

Operation

Not for

Reproduction

13

B

Figure 4: Mower drive controls

A

Stopping the Mower

1. Stop forward motion of the mower by releasing the

wheel drive control.

2. Stop the engine and blade by releasing the blade

control.

3. Electric Start Models: Remove the key from the

electric start switch.

Handle Height Adjustment

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

The height of the mower handle can be adjusted as fol-

lows:

1. Loosen the lower nuts (A, Figure 5) on each

lower handle.

2. Move the handle assembly (B) up or down until

the desired position is achieved.

3. Tighten the lower nuts on each lower handle to

maintain the desired position.

Figure 5: Adjusting the handle height

B

A

Cutting Height Adjustment

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Pull the height adjusting latch (A, Figure 6) out-

ward and move to the desired cutting height.

Figure 6: Adjusting cutting height

A

2. Set all wheels at the same cutting height. The

highest cutting position is Notch 7 (Figure 7). The

lowest cutting position is Notch 1.

4.00 in

10,16 cm

1.25 in

3,18 cm

Figure 7: Cutting height settings (approximate)

Operation

en

Not for

Reproduction

www.snapper.com14

Mulching Operation

For best mulching results, cut up to a maximum of 1/3

of grass blade length and recycle ONLY when grass is

dry.

1. Set all wheels in the highest cutting position (Notch

7). Refer to the Section entitled “Cutting Height

Adjustment”.

2. Move the engine speed control to the fast (Rabbit)

position.

3. Move the ground speed control to the slowest

speed setting.

4. Proceed mowing slowly. If the grass is very dense,

lower each rear wheel latch one notch lower than

the front wheel latches to improve mulching perfor-

mance.

NOTE: The mulching cover should remain on the

machine at all times, unless alternate discharge opera-

tions are desired, such as side discharging or bagging.

Removing the Mulching Cover

(Optional Accessory on Some Models)

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Remove the knob nuts (A, Figure 8) and inter-

nal/external tooth lock washers (B) securing the

mulching cover (C) to the mower deck.

2. Remove the cover.

Figure 8: Removing the mulching cover

A

C

B

Installing the Discharge

Deflector

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Remove the mulching cover. Refer to the Section

entitled “Mulching Operation”.

2. Install the deflector (A, Figure 9) to the deck in

place of the mulching cover, making sure that:

• The front hole (B) on the outside front of the

deflector fits over the stud where the front of the

mulching cover was originally secured;

• The slot (C) on top of the deflector slips under the

restraining nut on top of the deck (under the right

front corner of the engine);

• The slot (D) on the inside rear of the deflector

slips onto the stud behind the rear of the discharge

opening, where the rear of the mulching cover was

originally secured.

3. Install the internal/external tooth lock washers and

knob nuts onto the studs and tighten securely.

Figure 9: Installing the discharge deflector

B

A

C

D

WARNING

DO NOT operate without entire Grass Catcher or

guard in place. Grass Catcher components are

subject to deterioration during normal use. Inspect

frequently and replace worn or damaged components

immediately.

!

Operation

Not for

Reproduction

15

Installing the Grass Bag

Adapter

(Optional Accessory on Some Models)

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Remove the mulching cover. Refer to the Section

entitled “Mulching Operation”.

2. Install the adapter (A, Figure 10) to the deck in

place of the mulching cover, making sure that:

• The front hole (B) on the outside front of the adapt-

er fits over the stud where the front of the mulching

cover was originally secured;

• The slot (C) on top of the adapter slips under the

restraining nut on top of the deck (under the right

front corner of the engine);

• The slot (D) on the rear of the adapter slips onto

the stud behind the rear of the discharge opening,

where the rear of the mulching cover was originally

secured.

3. Install the internal/external tooth lock washers and

knob nuts onto the studs and tighten securely.

4. Route the recoil rope around the outside of the

rope guide pulley (E).

NOTE: The recoil rope may need to be slackened.

Refer to the section entitled “Starting the Mower”.

Figure 10: Installing the grass bag adapter

B

D

A

E

C

Installing the Mulching Plug

(Optional Accessory on Some Models)

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Install the mulching plug (A, Figure 11) if mulching

is desired after the bag adapter is installed. Install

the mulching plug completely and securely into the

bag adapter (B).

2. Install the grass bag as a safeguard and to further

secure the mulching plug.

WARNING

Install the grass bag when using the mulching plug.

Failure to do so may result in personal injury or death.

!

3. Refer to the Section entitled “Mulching Operation”.

Figure 11: Installing the mulching plug

B

A

Operation

en

Not for

Reproduction

www.snapper.com16

Installing the Grass Bag

(Optional Accessory on Some Models)

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Install the grass bag adapter. Refer to the Section

entitled “Installing the Grass Bag Adapter”.

2. Install the grass bag by sliding the connector (A,

Figure 12) over the adapter flange.

3. Attach the grass bag hooks (B) over the middle

handle cross bar.

Figure 12: Installing the grass bag

B

A

WARNING

Grass Catcher bags are made of woven fabric, and

are subject to deterioration and wear during normal

usage. Check condition of bag before each use.

Immediately replace worn or damaged catcher bags

with only genuine replacement bags. The grass

catcher is optional equipment on some models.

!

Charging the Battery

(Optional Accessory on Some Models)

The battery provided with your mower is sealed and

maintenance-free. It requires no special care other

than keeping it properly charged. Use only the charger

provided with your mower when charging the battery.

Charge the battery after each use, and if the battery

has been stored for longer than 30 days. The time

required to charge the battery varies, but typically 16 to

24 hours will be suffcient to bring the battery to a fully

charged condition.

1. Remove the dust cap from the charger jack (A,

Figure 13).

2. Plug the battery charger (B) into the charger jack.

3. Plug the charger into a 120-volt wall outlet.

4. Charge the battery for a period of 16 to 24 hours.

(Longer periods will not damage the battery.)

5. Unplug the charger from the wall outlet.

6. Unplug the charger from the charger jack.

7. Replace the dust cap onto the charger jack.

Figure 13: Charging the battery

B

A

WARNING

AVOID SERIOUS INJURY AND PROPERTY DAMAGE.

DO NOT attempt to charge this battery with automotive or

‘Boost’ chargers. DO NOT attempt to jump start a mower

that has a dead battery. Always use the charger supplied

with this mower to charge this battery.

! !

Operation

Not for

Reproduction

17

Maintenance

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool. Wear heavy leather gloves when

handling or working around cutting blades. Blades are

extremely sharp and can cause severe injury.

!

Maintenance Chart

MOWER

Every 8 Hours or Daily

Check safety interlock system

Clean debris off mower

Every 25 Hours or Annually *

Check mower for loose hardware

See Dealer Annually to

Lubricate mower

Check mower blade **

Check mower blade stopping time

Check drive belt

Clean battery and cables

* Whichever comes first

**Check blade more often in regions with sandy soils

or high dust conditions.

* Whichever comes first

**Clean more often in dusty conditions or when

airborne debris is present.

ENGINE

First 5 Hours

Change engine oil

Every 8 Hours or Daily

Check engine oil level

Every 25 Hours or Annually *

Clean engine air filter and pre-cleaner (if equipped)

**

Every 50 Hours or Annually *

Change engine oil

Replace oil filter (if equipped)

Annually

Replace air filter

Replace pre-cleaner (if equipped)

See Dealer Annually to

Inspect muffler and spark arrester (if equipped)

Replace spark plug

Replace fuel filter (if equipped)

Clean engine air cooling system

Emissions Control

Maintenance, replacement, or repair of the emissions

control devices and systems may be performed by any

non-road engine repair establishment or individual.

However, to obtain “no charge” emissions control ser-

vice, the work must be performed by a factory autho-

rized dealer. See the Emissions Warranty.

en

Not for

Reproduction

www.snapper.com18

Maintenance

Change Engine Oil

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool.

!

1. Drain the fuel tank completely.

2. Remove the dipstick (A, Figure 14), then turn the

mower on its side. Allow the oil to drain from the oil

fill tube into an appropriate container. Dispose of

used oil properly.

3. Place the mower upright, then fill the engine with

engine oil to the ‘full’ mark on the dipstick. Refer

to the section entitled ‘Oil Recommendations’. Do

not overfill.

Figure 14: Draining the engine oil

A

B

IMPORTANT: Drain the fuel tank before tipping the

machine. DO NOT tip the machine with the carburetor

or spark plug down. Oil from the crankcase will satu-

rate the air filter and cause the engine to be hard to

start or not start at all. If contamination does occur, the

air filter will have to be replaced.

Change Oil Filter (if equipped)

1. Drain the oil from the engine. Refer to the section

entitled ‘Change Engine Oil’.

2. Remove the oil filter (B, Figure 14) and dispose of

properly.

3. Before you install the new oil filter, lightly lubricate

the oil filter gasket with fresh, clean oil.

4. Install the oil filter by hand until the gasket contacts

the oil filter adapter, then tighten the oil filter 1/2 to

3/4 turns.

5. Add oil. Refer to the section entitled ‘Change

Engine Oil.’.

6. Start and run the engine. As the engine warms up,

check for oil leaks.

7. Stop the engine and check the oil level. It should

be at the top of the full indicator on the dipstick.

Service Air Filter

WARNING

Never start or run the engine with the air cleaner

assembly (if equipped) or the air filter (if equipped)

removed.

!

NOTE: Do not use pressurized air or solvents to clean

the filter. Pressurized air can damage the filter and

solvents will dissolve the filter.

1. Remove the fastener (A, Figure 15) and the air

filter cover (B).

2. Remove the pre-cleaner (C) and the filter (D).

3. To loosen debris, gently tap the filter on a hard sur-

face. If the filter is excessively dirty, replace with a

new filter.

4. Wash the pre-cleaner in liquid detergent and

water. Then allow it to thoroughly air dry. Do not oil

the pre-cleaner.

5. Assemble the dry pre-cleaner to the filter.

6. Install the filter and pre-cleaner into the base (E).

Make sure filter fits securely in the base.

7. Install air filter cover and secure with fastener.

Make sure the fastener is tight.

Figure 15: Air filter and pre-cleaner

A

B

E

C

D

Not for

Reproduction

19

Maintenance

Check Safety Interlock System

1. Start the mower.

2. Release the blade control. The engine must stop

within 3 seconds.

If the engine does not stop within 3 seconds, do not

use the mower. Bring the mower to an authorized

dealer for service.

Clean Debris Off Mower

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool. Wear heavy leather gloves when

handling or working around cutting blades. Blades are

extremely sharp and can cause severe injury.

!

1. Clean dirt and debris from the top of the mower

deck.

2. Clean any debris buildup on or around the engine,

etc.

While cleaning, check components for wear or dam-

age. Replace worn or damaged components immedi-

ately.

Storage Procedure

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool. Wear heavy leather gloves when

handling or working around cutting blades. Blades are

extremely sharp and can cause severe injury.

!

Prepare the mower for “end of season” storage as fol-

lows:

1. Disconnect the spark plug wire and secure away

from the spark plug.

2. Drain the fuel tank and let the engine run until all

fuel is out of the carburetor.

NOTE: If using a fuel stabilizer, there is no need to

drain the fuel tank. Refer to the section entitled ‘Fuel

System’.

3. Use a brush or compressed air to remove loose

debris, then use a damp cloth to wipe down the

unit.

4. Tilt the mower up on its rear wheels and inspect

the underside of the deck. (Do not tilt the mower

with the spark plug or carburetor down.) Scrape

away stubborn accumulation of grass with a putty

knife and/or wire brush.

5. Lubricate all exposed metal with a light coating of

oil to prevent corrosion.

6. Carefully fold the handles, flexing the control

cables to prevent cable damage.

7. Store the mower in a shed or other dry area, pro-

tected from weather.

Fuel System

Fuel can become stale when stored over 30 days.

Stale fuel causes acid and gum deposits to form in

the fuel system or on essential carburetor parts. To

keep fuel fresh, use Briggs & Stratton

®

Advanced

Formula Fuel Treatment & Stabilizer, available

wherever Briggs & Stratton genuine service parts are

sold.

For engines equipped with a FRESH START

®

fuel

cap, use Briggs & Stratton FRESH START

®

avail-

able in a drip concentrate cartridge.

There is no need to drain gasoline from the engine

if a fuel stabilizer is added according to instructions.

Run the engine for 2 minutes to circulate the stabilizer

throughout the fuel system before storage.

If gasoline in the engine has not been treated with a

fuel stabilizer, it must be drained into an approved con-

tainer. Run the engine until it stops from lack of fuel.

The use of a fuel stabilizer in the storage container is

recommended to maintain freshness.

en

Not for

Reproduction

www.snapper.com20

Maintenance

Service

WARNING

DO NOT attempt any maintenance, adjustments or

service with engine and blade running. STOP engine

and blade. Disconnect spark plug wire and secure

away from spark plug. Engine and components are

HOT. Avoid serious burns, allow sufficient time for all

components to cool. Wear heavy leather gloves when

handling or working around cutting blades. Blades are

extremely sharp and can cause severe injury.

!

Check Grease Level in Transmission

1. Remove the transmission fill plug (A, Figure 16).

Roll the machine forward or backward while look-

ing down into the plug hole.

2. If liquid grease is not visible on the input gear (the

small gear below the plug hole), add an amount, to

cover the gear, of Snapper “00” grease.

Figure 16: Removing the transmission fill plug

A

NOTE: Snapper “00” grease (Part No. 7029443) is

available at your dealer.

NOTE: Do not spill grease or oil onto the surface of the

drive disc (A, Figure 17).

Figure 17: Location of the drive disc

A

3. Reinstall the transmission plug.

4. Check the grease level after each 25 hours of

operation.

Check Mower Blade

1. Disconnect the spark plug wire and secure the end

away from the plug.

2. Tilt the mower up on its rear wheels for access to

the blade cap screw (A, Figure 18). Do not tilt the

mower with the spark plug or carburetor down.

IMPORTANT: Drain the fuel tank before tipping the

mower. DO NOT tip the machine with the carburetor or

spark plug down. Oil from the crankcase will saturate

the air filter and cause the engine to be hard to start or

not start at all. If contamination does occur, the air filter

will have to be replaced.

3. Check the torque of the blade cap screw.

Recommended torque should be 40 lb-ft (54 N.m).

4. Check the blade for sharpness, wear and damage.

Refer to the Section entitled “Blade Wear Limits”.

Figure 18: Tightening the blade cap screw

A

Check Engine Drive Belt

• Visually check the engine drive belt for cracking,

fraying, severed or exposed belt strands. If worn

or damaged, replace the belt before operating the

mower.

Check Transmission Poly-V Belt

• Visually check the poly-v belt for cracking, fray-

ing, severed or exposed belt strands. If worn or

damaged, replace the belt before operating the

mower.

La page charge ...

Simplicity WALK MOWER, CONS CORE, MY15, DOM Manuel utilisateur

Ce manuel convient également à

Simplicity WALK MOWER, CONS CORE, MY15, DOM Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents