Tascam DR-100 MKIII Le manuel du propriétaire

Taper
Le manuel du propriétaire
DR-100
)
#
Linear PCM Recorder
D01292000B
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
日本語
OWNER'S MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
取扱説明書
https://tascam.jp/jp/
〒206-8530 東京都多摩市落合1-47
TEAC AMERICA, INC.
http://tascam.com/
Phone: +1-323-726-0303
1834 Gage Road, Montebello, California 90640 USA
TEAC MEXICO, S.A. de C.V.
http://teacmexico.net/
Phone: +52-55-5010-6000
Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF,
xico
TEAC UK Ltd.
http://tascam.eu/
Phone: +44-8451-302511
2 Huxley Road, Surrey Research Park Guildford, GU2 7RE, United Kingdom
TEAC EUROPE GmbH
http://tascam.eu/
Phone: +49-611-71580
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
TEAC SALES & TRADING(SHENZHEN) CO., LTD
Phone: +86-755-88311561~2
Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd., Futian District, Shenzhen
518040, China
2
TASCAM DR-100MKIII
TASCAM is a trademark of TEAC CORPORATION, registered in the U.S. and other
countries.
SDXC Logo is a trademark of SD-3C, LLC.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Supply of this product does not convey a license nor imply any right to distribute MPEG
Layer-3 compliant content created with this product in revenue-generating broadcast
systems (terrestrial, satellite, cable and/or other distribution channels), streaming
applications (via Internet, intranets and/or other networks), other content distribution
systems (pay-audio or audio-on-demand applications and the like) or on physical media
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards
and the like). An independent license for such use is required. For details, please visit
http://mp3licensing.com.
Blackfin® and the Blackfin logo are registered trademarks of Analog Devices, Inc.
Other company names, product names and logos in this document are the trademarks
or registered trademarks of their respective owners.
TASCAM DR-100MKIII
3
Owners Manual
IMPORTANT SAFETY
PRECAUTIONS
INFORMATION TO THE USER
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment
and receiver.
c) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
Changes or modifications to this equipment not
expressly approved by TEAC CORPORATION for
compliance could void the user’s authority to operate
this equipment.
For U.S.A.
For Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST
CONFORME A LA NORME NMB-003 DU CANADA.
This product complies with the
European Directives request and the
other Commission Regulations.
Declaration of Conformity
Responsible party: TEAC AMERICA, INC.
Address: 1834 Gage Road, Montebello,
California, U.S.A.
Telephone number: 1-323-726-0303
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
IMPORTANT SAFETY
INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
The apparatus draws nominal non-operating power
from the AC outlet with its POWER or STANDBY/ON
switch not in the ON position.
The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Caution should be taken when using earphones or
headphones with the product because excessive
sound pressure (volume) from earphones or
headphones can cause hearing loss.
If you are experiencing problems with this product,
contact TEAC for a service referral. Do not use the
product until it has been repaired.
CAUTION
Do not expose this apparatus to drips or splashes.
Do not place any objects filled with liquids, such as
vases, on the apparatus.
Do not install this apparatus in a confined space
such as a book case or similar unit.
The apparatus should be located close enough to
the AC outlet so that you can easily grasp the power
cord plug at any time.
If the product uses batteries (including a battery
pack or installed batteries), they should not be
exposed to sunshine, fire or excessive heat.
CAUTION for products that use replaceable lithium
batteries: there is danger of explosion if a battery is
replaced with an incorrect type of battery. Replace
only with the same or equivalent type.
Cautions about rechargeable batteries
This product uses rechargeable batteries. Misuse of
batteries could cause a leak, rupture or other trouble.
Always abide by the following precautions when using
batteries.
If a rechargeable battery leaks, do not touch the
leaking fluid with a bare hand. Please consult with
TEAC Corporation if a battery fluid leak occurs.
Battery fluid in an eye could result in loss of vision. If
fluid enters an eye, wash the eye immediately with
clean water. Do not rub the eye when washing.
Consult a physician soon after washing. Battery fluid
on the body or clothing could cause injuries or burns
on the skin. Wash with clean water immediately and
then consult a physician.
Do not use any AC adaptor other than the model
designated for use with this unit. Always use the
designated AC adaptor when operating the unit
or recharging the battery with a household AC
power source. Use of an AC adaptor other than
the designated one could lead to overheating and
cause injury, burns, fires or stains, as well as battery
ruptures and battery fluid leaks.
Do not put a battery into a fire or leave it or recharge
it near a fire, under the sun or in other hot conditions.
Do not disassemble a battery. Doing so could cause
electric shock. Please contact the shop where you
bought the product or TEAC Corporation if you want
to have a battery inspected or repaired. When you
want to dispose of the product, please follow the
instruction in the Owner's Manual to remove the
batteries and recycle the equipment properly.
CAUTIONS ABOUT BATTERIES
This product uses batteries. Misuse of batteries could
cause a leak, rupture or other trouble. Always abide by
the following precautions when using batteries.
Never recharge non-rechargeable batteries. The
batteries could rupture or leak, causing fire or injury.
When installing batteries, pay attention to
the polarity indications (plus/minus (¥/^)
orientation), and install them correctly in the
battery compartment as indicated. Putting them in
backward could make the batteries rupture or leak,
causing fire, injury or stains around them.
When you store or dispose batteries, isolate their
terminals with insulation tape or something like that
to prevent them from contacting other batteries or
metallic objects.
When throwing used batteries away, follow the
disposal instructions indicated on the batteries and
the local disposal laws.
Do not use batteries other than those specified. Do
not mix and use new and old batteries or different
types of batteries together. The batteries could
rupture or leak, causing fire, injury or stains around
them.
Do not carry or store batteries together with small
metal objects. The batteries could short, causing
leak, rupture or other trouble.
Do not heat or disassemble batteries. Do not put
them in fire or water. Batteries could rupture or leak,
causing fire, injury or stains around them.
If the battery fluid leaks, wipe away any fluid on
the battery case before inserting new batteries. If
the battery fluid gets in an eye, it could cause loss
of eyesight. If fluid does enter an eye, wash it out
thoroughly with clean water without rubbing the
eye and then consult a doctor immediately. If the
fluid gets on a persons body or clothing, it could
cause skin injuries or burns. If this should happen,
wash it off with clean water and then consult a
doctor immediately.
4
TASCAM DR-100MKIII
The unit power should be off when you install and
replace batteries.
Remove the batteries if you do not plan to use the
unit for a long time. Batteries could rupture or leak,
causing fire, injury or stains around them. If the
battery fluid leaks, wipe away any fluid on the battery
compartment before inserting new batteries.
Do not disassemble a battery. The acid inside the
battery could harm skin or clothing.
8
For European Customers
Disposal of electrical and electronic
equipment
(a) All electrical and electronic equipment should
be disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local author-
ities.
(b) By disposing of the electrical and electronic
equipment correctly, you will help save valuable
resources and prevent any potential negative
effects on human health and the environment.
(c) Improper disposal of waste equipment can have
serious effects on the environment and human
health as a result of the presence of hazardous
substances in electrical and electronic equipment.
(d) The crossed out wheeled dust bin
symbol indicates that electrical
and electronic equipment must be
collected and disposed of separately
from household waste.
(e) The return and collection systems
are available to the end users. For more detailed
information about disposal of old electrical and
electronic equipment, please contact your city
office, waste disposal service or the shop where
you purchased the equipment.
Disposal of batteries and/or
accumulators
(a) Waste batteries and/or accumulators should
be disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local author-
ities.
(b) By disposing of waste batteries and/or accumu-
lators correctly, you will help save valuable
resources and prevent any potential negative
effects on human health and the environment.
(c) Improper disposal of waste batteries and/or
accumulators can have serious effects on the
environment and human health as a result of the
presence of hazardous substances in batteries
and/or accumulators.
(d) The crossed out wheeled dust bin
symbol indicates that batteries and/or
accumulators must be collected and
disposed of separately from household
waste.
If the battery or accumulator contains
more than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) defined
in the Battery Directive (2006/66/EC), then the
chemical symbols for lead (Pb), mercury (Hg) and/
or cadmium (Cd) will be indicated beneath the
crossed out wheeled dust bin symbol.
(e) The return and collection systems are available to
the end users. For more detailed information about
disposal of waste batteries and/or accumulators,
please contact your city office, waste disposal
service or the shop where you purchased them.
Pb, Hg, Cd
TASCAM DR-100MKIII
5
Contents
IMPORTANT SAFETY INSTRUCTIONS .............................3
Included items ........................................................................5
Recycling lithium-ion rechargeable batteries ...........5
Removing the built-in battery ............................................. 5
Note about the Reference Manual .................................5
About SD cards .......................................................................6
Precautions for use ...................................................................... 6
Precautions for placement and use ...............................6
Beware of condensation .....................................................6
Cleaning the unit ...................................................................6
Using the TEAC Global Site ................................................6
User registration ....................................................................6
Names of parts ........................................................................ 6
Top .......................................................................................................... 6
Front ...................................................................................................... 6
Rear panel .......................................................................................... 6
Left side ............................................................................................... 6
Right side ............................................................................................ 7
Bottom ................................................................................................. 7
Basic functions ........................................................................ 7
Home Screen overview ............................................................ 7
Basic menu operation procedures .................................... 7
Preparation ..............................................................................8
Powering the unit ......................................................................... 8
Inserting SD cards ......................................................................... 8
HOLD function for preventing accidental operation
. 8
Turning the unit on ...................................................................... 8
Turning the unit off (putting it in standby) ................. 8
Selecting the language ............................................................ 8
Setting the date and time ....................................................... 9
Formatting (initializing) SD cards ...................................9
Recording .................................................................................9
Adjusting input levels ................................................................ 9
Playing recordings ............................................................. 10
Deleting files ........................................................................ 10
Connecting with a computer ......................................... 10
Quick reference for using various functions.............11
Menu list ..................................................................................13
Function menu list ............................................................. 14
Message list ............................................................................15
Troubleshooting ................................................................. 16
Specifications ....................................................................... 16
General ..............................................................................................16
Inputs and outputs ....................................................................16
Audio performance ................................................................... 17
Recording times (in hours: minutes) .............................. 17
Other ................................................................................................... 17
Information is given about products in this manual
only for the purpose of example and does not indicate
any guarantees against infringements of third-party
intellectual property rights and other rights related
to them. TEAC Corporation will bear no responsibility
for infringements on third-party intellectual property
rights or other liabilities that occur as a result of the use
of this product.
Properties copyrighted by third parties cannot be
used for any purpose other than personal enjoyment
and the like without the permission of the right
holders recognized by copyright law. Always use this
equipment properly.
TEAC Corporation will bear no responsibility for rights
infringements committed by users of this product.
In consideration of the remote possibility that data
could be lost or damaged due to accidental erasure
or malfunction of this unit, for example, we highly
recommend that you back up important recordings
to a computer or other storage device.
Thank you very much for purchasing the TASCAM
DR-100MKIII Linear PCM Recorder.
Before using this unit, read this Owner's Manual
carefully so that you will be able to use it correctly and
enjoy working with it for many years. After you have
finished reading this manual, please keep it in a safe
place for future reference.
You can also download this Owner's Manual from the
TEAC Global Site (http://teac-global.com/).
This product has a Blackfin® 16/32-bit embedded
processor made by Analog Devices, Inc. This
processor controls the unit's digital signal processing.
Inclusion of this Blackfin® processor in the product
increases its performance and reduces its power
consumption.
Included items
This product includes the following items.
Keep the box and packing materials for transportation
in the future.
Please contact TASCAM Customer Support (see back
cover) if any of these items are missing or have been
damaged during transportation.
Main unit ................................................................× 1
Digital input conversion cable ................. × 1
Owners Manual (this document)
including warranty .......................................... × 1
Recycling lithium-ion
rechargeable batteries
This unit uses a built-in rechargeable lithium-ion battery.
When you no longer need a battery, take it to a shop
that participates in rechargeable battery recycling rather
than throwing it away in order to preserve precious
resources.
If you are uncertain, please contact TASCAM customer
support (see back cover).
Li-ion
CAUTION
Never disassemble the product other than when
preparing it for disposal.
Contact a TEAC service center (see back cover)
for rechargeable battery replacement.
Removing the built-in battery
Before removing the built-in battery, turn the unit on
and drain the battery until the unit completely stops
operating.
When draining the built-in battery, disconnect the
external power supply, remove the AA batteries, and
set the POWER/DISPLAY screen AUTO PWR SAVE item
to OFF.
To disassemble this unit, you will need to prepare a
Phillips head screwdriver (#0).
1.
Remove the rubber feet on the bottom of the unit.
2.
Remove the 4 screws that were covered by the
rubber feet.
3.
Remove the bottom panel.
4.
Disconnect the battery from the connector and
remove it.
Connector
Note about the Reference
Manual
This Owners Manual explains the main functions of this
unit. Please see the Reference Manual for information
about all the unit’s functions.
You can also download this Owners Manual and the
Reference Manual from the TEAC Global Site (http://
teac-global.com/).
6
TASCAM DR-100MKIII
About SD cards
This unit uses SD cards for recording and playback.
It can use 64MB–2GB SD cards, 4–32GB SDHC cards and
48–128GB SDXC cards.
A list of SD cards that have been confirmed for use
with this unit can be found on the TEAC Global Site
(http://teac-global.com/). You can also contact TASCAM
customer support for information.
Precautions for use
SD cards are delicate media. In order to avoid damaging
SD cards, please take the following precautions when
handling them.
Do not leave them in extremely hot or cold places.
Do not leave them in extremely humid places.
Do not let them get wet.
Do not put things on top of them or twist them.
Do not hit them.
Do not remove or insert them during recording,
playback, data transmission or other SD card access.
When transporting them, put them into cases, for
example.
Precautions for placement and
use
The environmental temperature operating range of
this unit is 0–40°C (32–104°F).
Do not install this unit in the following types of
locations. Doing so could make the sound quality
worse or cause malfunction.
Places with significant vibrations or that are
otherwise unstable
Places exposed to direct sunlight for extended
periods of time
Near heating equipment or other extremely hot
places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
Places exposed directly to rain or other water
If this unit is placed near a power amplifier or other
device with a large transformer, it could cause a hum.
If this occurs, increase the distance between this unit
and the other device.
This unit could cause color irregularities on a TV
screen or noise from a radio if used nearby. If this
occurs, use this unit farther away.
This unit might produce noise if a mobile phone or
other wireless device is used nearby to make calls or
to send or receive signals. If this occurs, increase the
distance between this unit and those devices or turn
them off.
To enable good heat dissipation, do not place
anything on top of the unit.
Do not place this unit on top of a power amplifier or
other device that generates heat.
Beware of condensation
Condensation could occur if the unit is moved from a
cold place to a warm place, it is used immediately after
a cold room has been heated or it is otherwise exposed
to a sudden temperature change. To prevent this, or if
this occurs, let the unit sit for one or two hours at the
new room temperature before using it.
Cleaning the unit
To clean the unit, wipe it gently with a soft dry cloth. Do
not wipe with chemical cleaning cloths, thinner, alcohol
or other chemical agents. Doing so could damage the
surface or cause discoloration.
Using the TEAC Global Site
You can download this Owners Manual and the
Reference Manual necessary for this unit from the TEAC
Global Site (http://teac-global.com/).
1.
Open the TEAC Global Site (http://teac-global.
com/).
2.
In the TASCAM Downloads section, click the
desired language to open the Downloads website
page for that language.
NOTE
If the desired language does not appear, click
Other Languages.
3.
Click the product name in the “Search by Model
Name” section to open the Downloads page for
that product.
4.
Select and download the Owner’s Manual and the
Reference Manual that are needed.
User registration
Customers in the USA, please visit the TASCAM website
(http://tascam.com/) to register as a user online.
Names of parts
CAUTION
When connecting and using plugs from
headphones and other external devices, do not
apply excessive force to the plugs. In particular,
be careful not to apply too much force when
using a standard to mini plug adapter. Doing so
could damage the equipment.
Top
1 UNI MIC L/R (built-in directional stereo mic)
2 OMNI MIC L/R (built-in omnidirectional stereo
mic)
3 Built-in speaker (mono)
4 CHG (charge) indicator
5 Display
6 HOME button
7 LIMITER switch
8 Fn button
9 MENU button
0 . button
q / button
w STOP [8] button
e PLAY/PAUSE [7/9] button
r INPUT LEVEL selection switch
t MIC PAD switch
y ENTER/MARK button
u Wheel
i REC [0] button/REC indicator
Front
o DIGITAL IN connector
p EXT IN connector
Rear panel
a Level indicator
s REMOTE jack
d Strap attachments
f MIC/LINE IN L/R jacks (XLR/TRS)
g PHANTOM switch
Left side
h (power) button
j USB port
This is a Micro-B USB port.
Using a cable that complies with USB standards,
you can connect the unit to a computer as a mass
storage device or use an AC adapter to supply
power.
k LINE OUT jack
l (headphone) jack
; (headphone/speaker) LEVEL volume
TASCAM DR-100MKIII
7
z HOLD switch
x (speaker) switch
Right side
c Battery compartment (AA batteries)
v SD card slot
b Input level knob
Bottom
n Tripod mounting threads (1/4-inch)
m REC indicator
Basic functions
Home Screen overview
Stopped/playing
Recording/recording standby
1 Input source
2 Input channel indicator
3 Low cut filter status
4 Phantom power supply status
5 Power supply status
6 File format
7 Playback speed/loop playback status
8 Transport status (stopped/playing)
9 Loop playback IN/OUT point indicators
0 Level meters
q Playback folder name
w Playback file name
e Playback time/remaining playback time
r Playback position
t Peak value in decibels (dB)
y Recording format
u Recording function information
i Transport status (recording standby/
recording)
o Level meters
p Recording folder name
a Recording file name
s Recording time/remaining recording time
d Recording position
f Peak recording level in decibels (dB)
g Input levels
Basic menu operation procedures
1.
Open the MENU Screen.
Press the MENU button.
2.
Select a menu item.
Use the wheel to select the item, and press the
ENTER/MARK button to show the settings.
3.
Select a setting item.
Use the wheel to select the item, and press the
ENTER/MARK button to show the setting values.
NOTE
If the setting values are only ON and OFF, you
can switch them without selecting from a list.
Press the . button to return to the previous
screen.
4.
Select a setting value.
Use the wheel to change the setting, and press the
ENTER/MARK button to confirm it.
NOTE
Press the . button to cancel an operation.
Press the HOME button to return to the Home
Screen.
8
TASCAM DR-100MKIII
Preparation
Powering the unit
8
Using the built-in battery
Charge it before using the unit the first time after
purchase and after it has not been used for a long time.
Charging the built-in battery
Charge the built-in battery by using a TASCAM
PS-P520E AC adapter (sold separately) or by using a
USB cable (Type A Micro B) to connect the USB port
on the unit to a computer.
The unit can be used while the battery is charging.
TASCAM PS-P520E (sold separately)
AC outlet
Micro B
USB plug
You can check the recharging status of the built-in
batteries with the color of the CHG (charge)
indicator.
Lit orange: charging
Lit green: charging complete
8
Using AA batteries
1.
Slide the battery compartment cover toward the
bottom of the unit to open it.
2.
Install 2 AA batteries with their ¥ and ^ marks
as shown in the battery compartment.
3.
Close the battery compartment cover.
Set the type of batteries used in order to allow
the unit to accurately show the amount of power
remaining and determine whether enough power is
available for proper operation. (By default, this is set
to alkaline batteries.) (See “Quick reference for using
various functions” on page 11.)
Inserting SD cards
1.
Open the SD slot cover.
2.
Insert an SD Card into the slot as shown in the
illustration until it clicks into place.
3.
Close the SD card slot cover.
CAUTION
SD cards that meet SD, SDHC or SDXC standards
can be used with this unit.
A list of SD cards that have been confirmed to
work with this unit can be found on the TEAC
Global Site (http://teac-global.com/).
HOLD function for preventing
accidental operation
You can slide the HOLD switch to LEVEL or ALL to
enable the hold function that prevents accidental
operation.
ALL: operations of the input level knob and all
buttons are ignored
LEVEL: Operations of the input level knob are
ignored
OFF: hold function is off
Turning the unit on
Confirm that the HOLD switch is set to OFF, and press
down the (power) button until the screen appears.
The Home Screen appears after the unit starts up.
Turning the unit off (putting it in
standby)
Press the (power) button until the screen becomes
blank.
NOTE
You cannot turn the unit off (put it in standby)
when it is recording or in recording standby.
The automatic power saving function will turn
the power off when the unit is stopped. (See
“Quick reference for using various functions” on
page 11.)
Selecting the language
The first time you turn the unit on after purchasing
it, the LANGUAGE screen will open. You can set the
language used on this screen.
LCD screen (LANGUAGE screen)
1.
Turn the wheel to move the cursor and select the
language.
Options
ENGLISH: use English
日本語 : use Japanese
FRANÇAIS: use French
ESPAÑOL: use Spanish
DEUTSCH: use German
ITALIANO: use Italian
2.
After making the selection, press the ENTER/
MARK button to confirm it.
NOTE
You can change this setting with the SYSTEM
screen LANGUAGE item. (See “Quick reference for
using various functions” on page 11.)
TASCAM DR-100MKIII
9
Setting the date and time
The first time you turn the unit on after purchasing it
and whenever the date and time has been reset, the
DATE/TIME screen where you can set the date and time
will open.
1.
Turn the wheel to move the cursor to the item
(year/month/day/hour/minute/second) you want
to set, and press the ENTER/MARK button.
2.
Turn the wheel to change the value, and press the
ENTER/MARK button.
3.
Turn the wheel to move the cursor to OK, and press
the ENTER/MARK button to confirm the setting.
NOTE
You can also change the date and time setting from
the menu. (See “Quick reference for using various
functions” on page 11.)
Formatting (initializing) SD
cards
The following message appears if an unformatted card
is installed in the unit when it is turned on.
Press the ENTER/MARK button to format the card.
CAUTION
Formatting will erase all the data on the SD
card.
Backup data to a computer before formatting
the card.
NOTE
You can also use the SYSTEM screen MEDIA
FORMAT item to format a card. (See “Quick
reference for using various functions” on page
11.)
Recording
With this unit, you can record audio with even better
quality by changing the recording format and sampling
frequency, as well as setting the various functions,
including the limiter, level control and low-cut filter.
Here, we explain recording using UNI MIC L/R (default
setting).
Please see the Reference Manual for explanations of the
other functions.
1.
Start recording standby.
Press the REC [0] button to start recording
standby. The REC indicator will blink.
2.
Adjust the input level.
The input level can be adjusted even when in
recording standby or recording. (See “Adjusting
input levels” on page 9.)
3.
Start recording.
Press the REC [0] button when in recording
standby to start recording. The REC indicator will
stop blinking and stay lit.
4.
Stop recording.
Press the STOP [8] button again to stop
recording.
NOTE
Press the REC [0] button during recording to
pause recording.
Press the REC [0] button again to restart
recording.
Adjusting input levels
Before starting recording, the input levels must be
adjusted to suitable levels in order to prevent distortion
of input signals that are too loud and to prevent input
signals from being so quiet that they are masked by
noise.
8
Setting suitable input levels
Set the INPUT LEVEL selection switch to STEREO.
While watching the level meters, use the input level
knob to adjust the input level to around −12 dB.
Adjust the levels so they are as high as possible without
causing the PEAK level indicators to light when the
loudest sounds (peak levels) are input.
Level indicators
If the PEAK level indicators still light even when the
input levels are lowered as much as possible, set the
MIC PAD switch to ON and adjust again.
If the PEAK level indicators still light even after doing
this, try changing the distances and angles between the
microphones and the sound sources.
10
TASCAM DR-100MKIII
Playing recordings
8
Starting playback
Press the PLAY/PAUSE [7/9] button to start
playback.
8
Pausing playback
Press the PLAY/PAUSE [7/9] or STOP [8] button
to pause playback.
NOTE
Press the PLAY/PAUSE [7/9] button again to
resume playback.
8
Stopping playback
Press the STOP [8] button when paused to return to
the beginning of the file.
8
Searching backward and forward
When the Home Screen is open and a track is playing
back or stopped, press and hold the . or /
button to search forward or backward.
Release the button to stop again or resume playback.
8
Selecting files (skipping)
When stopped or playing back, press the . button
to skip to the previous file, or press the / button to
skip to the next file.
8
Listening with the built-in speaker
Set the (speaker) switch to ON.
8
Listening with headphones
Connect headphones to the (headphone) jack.
NOTE
When headphones are connected, the built-in
speaker will not output sound even when the
(speaker) switch is set to ON.
8
Adjusting the volume
Use the LEVEL control to adjust the volume
output from the built-in speaker and headphones.
Deleting files
Follow these steps to delete a recorded audio file.
1.
Open the Function Screen
Press the Fn button.
2.
Select the delete function.
Use the wheel to select FILE DELETE, and press
the ENTER/MARK button.
3.
Execute deletion.
Use the wheel to select YES, and press the ENTER/
MARK button to delete the file and return to the
Home Screen.
To cancel, select NO, and press the ENTER/MARK
button to return to the FUNCTION Screen.
CAUTION
Be aware that file deletion cannot be undone.
Connecting with a computer
You can transfer audio files on the SD card in the unit
to a computer, as well as transfer audio files from the
computer to the unit.
8
Connecting with a computer using
USB
1.
Connect the USB cable.
If the unit is off (in standby), turn it on.
2.
Activate the connection
Select the SYSTEM screen USB STORAGE item, and
press the ENTER/MARK button.
MENU
w SYSTEM w USB STORAGE
Use the wheel to select YES, and press
the ENTER/MARK button to activate the
connection.
To cancel, select NO, and press the ENTER/
MARK button.
3.
This unit appears on the computer as an external
drive named “DR-100MKIII” (if the card has been
formatted by this unit).
8
Exchanging files with a computer
After following the instructions in the previous section,
click the “DR-100MKIII” drive on the computer screen to
show the “MUSIC” and “UTILITY folders.
To transfer files to the computer, open the “MUSIC
folder and drag and drop the desired files to destina-
tions of your choice.
To transfer files from the computer, drag and drop the
desired audio files on the computer to the “MUSIC
folder.
8
Disconnecting from a computer
Use the proper procedures on the computer to
unmount this unit. Then, press the ENTER/MARK
button on the unit to return to the Home Screen.
See the computers operation manual for instructions
about how to unmount an external volume.
TASCAM DR-100MKIII
11
Quick reference for using various functions
Button names are shown like this: MENU.
The following menu operations assume that the Home Screen is open before starting. Instructions are abbreviated.
For example, "Press the MENU button, select the menu item, and then select the setting item" becomes "MENU
w menu item w setting item".
For function details, see the Reference Manual.
Category Desired action/explanation Procedures, buttons used
Recording
Input settings
Select input sources
MENU w I/O SETTING w SOURCE
You can select the input source as you like and
according to the application.
Use a condenser mic that requires phantom
power supply
Turn the PHANTOM switch ON
You can set the phantom power voltage.
MENU w I/O SETTING w
PHANTOM VOLT
Use a small condenser mic that requires plug-in
power supply
MENU w I/O SETTING w
PLUG IN POWER
The unit can supply plug-in power.
Use mid-side microphones
MENU w I/O SETTING w
MS DECODE
The unit can convert mid-side format stereo
mic signals into ordinary stereo signals.
Air-conditioning or other noise is bothersome
MENU w I/O SETTING w
LOW CUT
The low-cut filter can reduce noise from
air-conditioners and other sources.
Record in mono
MENU w REC SETTING w
FILE TYPE
Input level
Adjust the input level Input level knob
If you want to adjust the left and right input
levels separately, set the INPUT LEVEL
selection switch to L or R.
INPUT LEVEL selection switch
Record without distortion
The meters are still peeking even though the
input level knob is turned all the way down.
Turn the MIC PAD switch ON
Avoid distortion when signals that are too loud
are input suddenly. (Limiter function)
Turn the LIMITER switch ON
Automatically adjust the recording level in
response to the input sound. (Automatic level
mode)
MENU w I/O SETTING w
LEVEL CONTROL w AUTO LEVEL
Automatically reduce the input level in
response to the maximum level of the input
sound. (Peak reduction mode)
MENU w I/O SETTING w
LEVEL CONTROL w PEAK REDUCTION
Category Desired action/explanation Procedures, buttons used
Recording
Basic settings
Set the recording audio quality
You can set the recording audio quality as you
like and according to the application.
MENU w REC SETTING w FORMAT
MENU w REC SETTING w SAMPLE
Record with even higher quality
Change the ADC audio quality.
MENU w I/O SETTING w
A/D FILTER
Improve the S/N performance.
MENU w I/O SETTING w
DUAL ADC
Change where recording files are saved MENU w BROWSE
Other
functions
Create a new file while continuing to record (file incrementing function)
Manually increment files
/ while recording
Automatically increment files at set time
intervals
MENU w REC SETTING w
FILE INC
Divide the recorded file that is selected
Divide a file manually
(File division function)
Fn w DIVIDE w DIVIDE
Divide at all mark positions.
(Mark division function)
Fn w DIVIDE w MARK DIVIDE
Start recording automatically (Automatic
recording function)
MENU w REC SETTING w
AUTO REC w MODE w LEVEL
The unit can start recording when it detects an
input signal level.
Record without losing the first sound at the
being of a file (Pre-recording function)
MENU w REC SETTING w
PRE REC
The unit can record up to two seconds before
recording is triggered.
Record a backup
MENU w REC SETTING w
DUAL REC w MODE w LEVEL
The unit can record a backup at a level 12dB
lower than the set recording level.
Simultaneously record WAV and MP3 files
MENU w REC SETTING w
DUAL REC w MODE w FORMAT
The unit can simultaneously record WAV and
MP3 files.
Playing recordings
Listen to playback through the built-in speaker Set the (speaker) switch to ON
Adjust the headphone/speaker volume
(headphone/speaker) LEVEL
volume
They volume might differ depending on the
headphones used.
Set this according to the headphones you are
using.
MENU w I/O SETTING w
OUTPUT ATT w PHONES
Change the playback file
Select a file before or after
.//
Select from a list MENU w BROWSE
12
TASCAM DR-100MKIII
Category Desired action/explanation Procedures, buttons used
Playing recordings
Change the playback position
Change the playback position while
outputting sound.
Press and hold .//
Move without outputting sound. Wheel
Repeat playback
Fn w LOOP PLAY
The unit can continuously repeat playback
of a single file or an interval. (Loop playback
function)
Change playback speed
Fn w VSA PLAY
The unit can play files slowly or quickly. (VSA
playback function)
Files
Save a file
Save the selected file Fn w CHANGE PROTECT
Select a file and save it
MENU w BROWSE w Fn w
CHANGE PROTECT
Delete a file
Delete a selected file Fn w FILE DELETE
Select a file and delete it
MENU w BROWSE w Fn w
FILE DELETE
Delete all files at the same time
MENU w BROWSE w Fn w
ALL FILES DELETE
Create a folder MENU w BROWSE w NEW FOLDER
Delete a folder
MENU w BROWSE w Fn w
FOLDER DELETE
Change the file name format MENU w SYSTEM w FILE NAME
Reset the file number
Reset the file number immediately
MENU w SYSTEM w
FILE No.RESET w RESET
Reset the file number each time a new folder
is created
MENU w SYSTEM w
FILE No.RESET w ON
Connect to a computer and transfer audio files
MENU w SYSTEM w USB STORAGE
You can use this unit as USB mass storage.
Marks
Add marks manually
ENTER/MARK when recording or
playing back
You can add marks manually when recording
or playing back (but not when stopped).
Category Desired action/explanation Procedures, buttons used
Marks
Add marks automatically to a recording
Add when the set level is exceeded (LEVEL).
Add when the set time is reached (TIME).
Add when a digital input track division is
detected (DIGITAL).
MENU w MARK SETTING w
AUTO MARK w MODE
Add when a level indicator PEAK lights.
MENU w MARK SETTING w
PEAK MARK
Move to a mark position
Move to a mark position. ENTER/MARK + .//
Select the mark to move to.
MENU w MARK SETTING w
MARK SKIP
Delete a mark
When stopped, move to a mark position and
press the ENTER/MARK button to delete it.
ENTER/MARK
Delete all marks in a file at the same time.
MENU w BROWSE w Fn w
CLR ALL MARKS
Settings
Display
Turn off the backlight
MENU w POWER/DISPLAY w
BACKLIGHT
Change the display brightness
MENU w POWER/DISPLAY w
BRIGHTNESS
Adjust the contrast
MENU w POWER/DISPLAY w
CONTRAST
Turn off the level and REC indicators
MENU w POWER/DISPLAY w
INDICATORS
Change the peak level and hold
MENU w POWER/DISPLAY w
PEAK LEVEL
Clear held peak levels
When the Home Screen is open, press
and hold Fn
This works only when the peak hold function
mode is set to HOLD.
System
View various types of information
You can view information about the SD card.
MENU w SYSTEM w INFORMATION
w CARD
You can check the firmware version.
MENU w SYSTEM w INFORMATION
w FIRMWARE
You can view information about files.
MENU w SYSTEM w INFORMATION
w FILE
Fn w FILE INFORMATION
You can view settings used while recording.
If the XRI data recording function is turned ON,
settings used during recording will be saved
with the file.
Fn w FILE INFORMATION
MENU w REC SETTING w XRI
TASCAM DR-100MKIII
13
Category Desired action/explanation Procedures, buttons used
Settings
System
Change date and time MENU w SYSTEM w DATE/TIME
Set the language MENU w SYSTEM w LANGUAGE
Restore factory default settings MENU w SYSTEM w INITIALIZE
Format an SD card
MENU w SYSTEM w
MEDIA FORMAT
Operation
Prevent accidental operation
Disable input level operations. HOLD w LEVEL
Disable the input level knob and all buttons. HOLD w ALL
Operate the the unit remotely
Set the remote control used. MENU w SYSTEM w REMOTE
Power
Turn the power off automatically (Automatic
power saving function)
MENU w POWER/DISPLAY w
AUTO PWR SAVE
Prevent batteries from being drained when
the unit is left unused.
The unit will not turn off automatically during
recording or playback.
Use the unit for extended amounts of time
Continuous operation for an extended amount
of time is possible by using both the built-in
battery and AA batteries. Set whether to use
the built-in battery or the AA batteries first.
MENU w POWER/DISPLAY w
BATTERY w PRIORITY
Set the type of AA batteries used to allow the
unit to show the remaining charge accurately.
MENU w POWER/DISPLAY w
BATTERY w AA TYPE
Starting recording immediately
Press (power) while pressing and
holding REC
When the unit is off (in standby mode), press
the (power) button while pressing and
holding the REC button to turn it on and start
recording immediately.
Other
functions
Prepare for synchronization with a video file
MENU w REC SETTING w
AUTO TONE
The unit can automatically generate a tone
signal when beginning and ending recordings.
By having the unit record this tone signal and
the camera record its output sound, synchro-
nizing during video editing can be made
easier.
Input signals to a camera
MENU w I/O SETTING w
OUTPUT ATT w LINE
The line output level can be attenuated 30 dB.
Menu list
Press the MENU button to open the MENU Screen.
Menu item Function
BROWSE
Work with files and folders on the SD card
REC SETTING
FORMAT
Set the recording file format
SAMPLE
Set the sampling frequency
FILE TYPE
Set the file type
XRI
Turn XRI data recording on/off
DUAL REC
Set dual recording function
FILE INC
Set the recording time interval for automatically incrementing files
AUTO REC
Set the auto-recording function
PRE REC
Set the pre-recording function
AUTO TONE
Set the auto tone function
I/O SETTING
SOURCE
Set the input source
A/D FILTER
Set the A/D converter filter
DUAL ADC
Turn on/off this function that improves S/N performance
PHANTOM VOLT
Set the phantom power voltage
PLUG IN POWER
Turn plug-in power on/off
LOW CUT
Set the low-cut filter
LEVEL CONTROL
Set the level control function
MS DECODE
Set the mid-side decoding function
OUTPUT ATT
Set the output attenuator function
MARK SETTING
AUTO MARK
Set the automatic mark function
PEAK MARK
Turn the peak mark function on/off
MARK SKIP
Set the mark skip mode
POWER/DISPLAY
AUTO PWR SAVE
Set the automatic power saving function
BATTERY
Makes settings related to the built-in and replaceable batteries
BACKLIGHT
Set how long the backlight stays on
BRIGHTNESS
Set the backlight brightness
CONTRAST
Adjust the contrast
INDICATORS
Turn indicators on/off
PEAK LEVEL
Set the level meter peak hold function
14
TASCAM DR-100MKIII
Menu item Function
SYSTEM
INFORMATION
Shows a variety of information.
DATE/TIME
Set the date and time
FILE NAME
Set the file name format.
FILE No.RESET
Reset the file number
REMOTE
Make connected remote control settings
LANGUAGE
Set the language shown on the display
INITIALIZE
Restore factory default settings
MEDIA FORMAT
Format the SD card
USB STORAGE
Switch to USB mass storage device mode
Function menu list
When the Home Screen is open and the unit is stopped, paused, playing back, or in recording standby, press the Fn
button to open the FUNCTION screen.
The function shown depends on the state of the unit when the Fn button is pressed.
Menu item Function
Stopped, paused or
playing back
CHANGE PROTECT
Change protection for the selected file
FILE DELETE
Delete the selected file
DIVIDE
Divide the selected file
LOOP PLAY
Make loop playback settings
VSA PLAY
Make VSA playback settings
MS DECODE
Set the mid-side decoding function
FILE INFORMATION
Show file information for the selected file
Recording standby
LOW CUT
Set the low-cut filter
LEVEL CONTROL
Set the level control function
MS DECODE
Set the mid-side decoding function
When a file or folder is selected on the Browse Screen, press the Fn button to open the FOLDER MENU or FILE MENU
screen.
Menu item Function
File selected on Browse
Screen
FILE INFORMATION
Show file information for the selected file
FILE DELETE
Delete the selected file
CHANGE PROTECT
Change the protection status of the selected file
CLR ALL MARKS
Delete all marks in the selected file
File not selected on
Browse Screen
ALL FILES DELETE
Delete all files in the selected folder
FOLDER DELETE
Delete the selected folder
TASCAM DR-100MKIII
15
Message list
The following is a list of the pop-up messages.
Refer to this list if one of these pop-up messages appears on the DR-100MKIII
and you want to check the meaning or determine a proper response.
Message Meaning and response
ALL HOLD on
The input level knob and all buttons have been
disabled by the HOLD switch.
LEVEL HOLD on
The input level knob has been disabled by the
HOLD switch.
Battery empty
Recharge the built-in battery or replace the
removable batteries.
Battery low
No card
Load an SD card.
Card protected
Move the write-protection switch to the unlocked
position in order to record or erase data on the SD
card.
Card error
The SD card was not recognized.
Change the SD card.
Card full
The SD card has no remaining space.
Format error
Format card
The SD card is not formatted properly or the card is
broken.
Press the ENTER/MARK button to start formatting.
Formatting will erase all the data on the SD card.
Invalid card
Change card
Something might be wrong with the SD card.
Change the SD card.
MBR error
Init card
The SD card is not formatted properly or the card is
broken.
Press the ENTER/MARK button to start formatting.
Formatting will erase all the data on the SD card. If
formatting is not possible, change the SD card.
Write error
REC continue
Writing to the SD card timed out. This has caused
audio to be interrupted and noise to occur.
A BOF mark is added at the point when audio was
interrupted.
Card slow
Check BOF MARK
SD card writing performance has become worse.
A BOF mark has been added at the point when
audio was interrupted because writing to the SD
card timed out.
Check the audio around the BOF mark.
Execute the erase format function or change the SD
card.
Invalid sys file
Make sys file
The system file required to operate this unit is
invalid.
Press the ENTER/MARK button to create a system
file.
No sys file
Make sys file
The system file is missing. This unit requires a system
file for operation.
Press the ENTER/MARK button to create a system
file.
Message Meaning and response
Non-supported
Please see the Reference Manual for file formats
that this unit can use.
File full
Recording is not possible because the total number
of folders and files would exceed the limit of 5000.
File not found
A file cannot be found or a file might be damaged.
Please check that file.
Can't delete
File protected
Remove protection from a file before trying to
delete it.
Can't divide
File too short
The file is too short, so it cannot be divided.
Can't divide
Current file MP3
MP3 files cannot be divided.
Can't divide
Dup file name
The divide function would cause the file name to
be the same as that of an existing file in the same
folder.
Use a computer to change the file name.
Can't divide
No mark
Files that do not have marks cannot be divided with
this function.
Can't divide
Short interval
Mark division will not work when the interval
between marks is two seconds or less.
Can't divide
No file
There is no audio file.
Can't divide
File name err
Division is not possible because the file name
would exceed the limit of 200 characters.
Use a computer to change the file name.
MARK full
The number of marks has reached the limit of 99.
Can't delete
Not empty
You cannot delete a folder that contains files.
Delete all the files in the folder and try again.
No XRI data
No XRI data has been saved in the file. Turn the
XRI data recording function ON before starting
recording.
XRI data cannot be saved when recording MP3 files.
Can't MARK
File protected
Marks cannot be added because the file is
protected from writing.
Remove protection from a file if you want to add
marks to it.
Can't MARK
File length
Marks cannot be added because the file is too short.
Digital-In
Unlock
Nothing is connected to the digital input (DIGITAL
IN) connector or the signal is not being input
correctly.
Check the digital connection.
Digital-In
Lock
Digital input has been properly detected.
DIN sample
Unmatch
The digital input sampling frequency does not
match the recording setting.
I/O too short
The IN and OUT points are too close together. Set
them with at least 1 second between them.
Message Meaning and response
Thermal Alert
Connect USB PWR
The internal temperature has risen while using the
built-in battery and/or AA batteries.
Continued use is possible by supplying power with
a USB connection.
Thermal Alert
The internal temperature has risen.
The system will shut down automatically.
If any other error occurs, turn the unit off and restart it.
16
TASCAM DR-100MKIII
Troubleshooting
If you are having trouble with the operation of this unit, please check the
following before seeking repair. If these measures do not solve the problem,
please contact the store where you bought the unit or TEAC customer support
(see back page).
8
The unit will not turn on.
Confirm that the built-in battery has enough charge or that the replaceable
batteries are installed correctly.
Confirm that the TASCAM PS-P520E AC adapter (sold separately) power
plug and the USB connector are securely connected. The unit might not
operate properly through a USB hub.
Confirm that the HOLD switch is set to OFF.
8
The unit turns off automatically.
Confirm that the automatic power saving function is disabled.
i
Since this unit complies with the European Standby Power Regulations
(ErP), the automatic power saving function operates regardless of
whether the unit is being powered by an AC adapter or batteries. If you
do not want to use the automatic power saving function, set it to OFF.
(The factory default setting is 30min.)
8
The CHG indicator alternately lights orange and
green.
Proper charging might not be possible in a location that is too hot or too
cold. Charging is possible when the temperature is between 0−30°C.
8
The remaining charge of the built-in battery is not
shown accurately
The remaining charge of the built-in battery might not be shown accurately
when the unit is purchased. Discharge and charge the battery completely
once to enable the unit to relearn the remaining battery charge and show
it accurately.
8
The unit does not function.
Confirm that the HOLD switch is set to OFF.
The unit will not function when in USB storage mode.
If operation becomes abnormal, press and hold the (power) button
for at least 10 seconds while holding down the STOP [8] button. This will
force the unit to turn off.
8
The SD card is not recognized.
Confirm that the SD card is inserted completely.
8
No sound is output.
Confirm the unit headphone/speaker output level.
Check the monitoring system connections and volume level.
No sound is output from the speaker in the following conditions.
i
The (speaker) switch is set to OFF
i
The unit is recording or in recording standby
i
Headphones are connected
8
Recording is not possible.
Confirm that the the SD card has enough open space.
Recording becomes impossible when the total number of files reaches
5000.
8
The input sound is extremely quiet or loud.
Check input level settings.
Check the output levels of connected external equipment.
8
The output sounds unnatural.
Check the playback speed (VSA playback function).
Confirm that the level control function is not on.
8
I cannot erase a file.
A protected (read only) file cannot be erased.
8
This unit’s files do not appear on the computer.
Confirm that the unit is properly connected to the computer using its USB
port. The unit might not operate properly if connected through a USB hub.
Confirm that the unit is in USB storage mode.
8
The wrong language was set accidentally.
After pressing the (power) button to turn the unit off, press the
(power) button while pressing and holding the MENU button.
The language selection menu will appear, and you will be able to select the
language.
Specifications
General
8
Recording media
SD card (64 MB−2 GB)
SDHC card (4 GB−32 GB)
SDXC card (48 GB−128GB)
8
Recording/playback formats
WAV (BWF):
44.1/48/88.2/96/176.4/192kHz, 16/24-bit
MP3: 44.1/48kHz, 128/192/256/320kbps
8
Number of channels
2 channels (stereo)
Inputs and outputs
8
MIC/LINE IN jacks (XLR support phantom power)
Connectors: XLR-3-31, 6.3mm (1/4") standard TRS jacks
8
EXT IN jack (can provide plug-in power)
Connector: 3.5mm (1/8”) stereo mini jack
8
DIGITAL IN connector
Connector: 3.5mm (1/8”) TRS jack
8
LINE OUT jack
Connector: 3.5mm (1/8”) stereo mini jack
8
(headphone) jack
Connector: 3.5mm (1/8”) stereo mini jack
8
Built-in speaker
0.4W (mono)
8
USB port
Connector type: Micro-B
Format: USB 2.0 HIGH SPEED mass storage class
8
REMOTE jack
Connector: 2.5mm (3/32”) TRS jack
TASCAM DR-100MKIII
17
Audio performance
8
Frequency response
MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
20Hz−20kHz +0.5dB/−1dB (44.1/48kHz sampling frequency, JEITA)
20Hz−40kHz +0.5dB/−2dB (88.2/96kHz sampling frequency, JEITA)
20Hz−80kHz +0.5/−4dB (176.4kHz/192kHz sampling frequency, JEITA)
8
Distortion
MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE, +20dBu Input) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
0.007% or less
(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)
8
S/N ratio
MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
102 dB or more
(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)
8
Equivalent input noise (EIN)
124 dBu or lower
Note: based on JEITA CP-2150
Recording times (in hours: minutes)
File format (recording setting) 4GB SDHC card
320kbps MP3 (stereo)
44.1kHz
27:46
16-bit WAV (stereo) 6:17
24-bit WAV (stereo) 96kHz 1:55
24-bit WAV (stereo) 192kHz 00:57
The recording times above are theoretical values and might differ
depending on the SD/SDHC/SDXC card in use.
The recording times shown above are not continuous recording times, but
rather they are the total possible recording times for the SD/SDHC/SDXC
card.
If recorded in mono, maximum recording times will be about double those
above.
If using dual recording, maximum recording times will be about half those
above.
Other
8
Power
Built-in lithium-ion rechargeable battery
2 AA batteries (alkaline, NiMH or lithium-ion)
USB bus power from a computer
AC adapter (TASCAM PS-P520E, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
8
Power consumption
7.5 W (maximum)
8
Battery operation time (continuous operation)
Using built-in (lithium-ion rechargeable) battery
Use conditions Operation time
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 12 hours
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 6 hours
Using alkaline batteries (EVOLTA)
Use conditions Operation time
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 2.75 hours
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 1 hours
Using NiMH batteries (eneloop)
Use conditions Operation time
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 3.5 hours
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 2.25 hours
Using lithium-ion batteries (Energizer Ultimate Lithium)
Use conditions Operation time
UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 7 hours
MIC/LINE IN jack/mic input
Phantom power used (+48V, 3mA×2 load)
STEREO WAV (BWF)/44.1kHz
16-bit recording
About 3.5 hours
NOTE
When using phantom power, the operation time might be reduced
depending on the mic being used.
8
Charging time (when unit off)
By USB: about 10 hours
Using PS-P520E: about 4.5 hours
8
Dimensions
80 x 155.7 x 35 mm (width × height × depth, excluding protrusions)
8
Weight
425 g/375 g (including batteries/not including batteries)
8
Operating temperature range
0°C–40°C (32°F–104°F)
Illustrations in this manual might differ in part from the actual product.
Specifications and external appearance might be changed without
notification to improve the product.
Detailed specifications are provided in the Reference Manual.
18
TASCAM DR-100MKIII
TASCAM DR-100MKIII
19
Mode d'emploi
PRÉCAUTIONS DE SÉCURITÉ
IMPORTANTES
Pour le Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
Ce produit est conforme aux
directives européennes et aux autres
réglementations de la Commission
européenne.
INSTRUCTIONS DE SÉCURITÉ
IMPORTANTES
1 Lisez ces instructions.
2 Conservez ces instructions.
3 Tenez compte de tous les avertissements.
4 Suivez toutes les instructions.
5 N'utilisez pas cet appareil avec de l'eau à proximité.
6 Ne nettoyez l'appareil qu'avec un chiffon sec.
7 Ne bloquez aucune ouverture de ventilation.
Installez-le conformément aux instructions du
fabricant.
8 Ne l'installez pas près de sources de chaleur telles
que des radiateurs, bouches de chauffage, poêles
ou autres appareils (y compris des amplificateurs)
dégageant de la chaleur.
9 Ne neutralisez pas la fonction de sécurité de la
fiche polarisée ou de terre. Une fiche polarisée
a deux broches, l'une plus large que l'autre.
Une fiche de terre a deux broches identiques et
une troisième broche pour la mise à la terre. La
broche plus large ou la troisième broche servent
à votre sécurité. Si la fiche fournie n'entre pas
dans votre prise, consultez un électricien pour le
remplacement de la prise obsolète.
10 Évitez de marcher sur le cordon d'alimentation et
de le pincer, en particulier au niveau des fiches, des
prises secteur, et du point de sortie de l'appareil.
11 N'utilisez que des fixations/accessoires spécifiés
par le fabricant.
12 Utilisez-le uniquement
avec des chariots, socles,
trépieds, supports ou tables
spécifiés par le fabricant ou
vendus avec l'appareil. Si
un chariot est utilisé, faites
attention à ne pas être blessé par un renversement
lors du déplacement de l'ensemble chariot/
appareil.
13 Débranchez cet appareil en cas d'orage ou de non
utilisation prolongée.
14 Confiez toute réparation à des techniciens
de maintenance qualifiés. Une réparation est
nécessaire si l'appareil a été endommagé d'une
quelconque façon, par exemple si le cordon ou
la fiche d'alimentation est endommagé, si du
liquide a été renversé sur l'appareil ou si des objets
sont tombés dedans, si l'appareil a été exposé
à la pluie ou à l'humidité, s'il ne fonctionne pas
normalement, ou s'il est tombé.
L’appareil tire un courant nominal de veille de la
prise secteur quand son interrupteur POWER ou
STANDBY/ON n’est pas en position ON.
La fiche secteur est utilisée comme dispositif de
déconnexion et doit donc toujours rester disponible.
Des précautions doivent être prises en cas
d'utilisation d'écouteurs ou d'un casque avec le
produit car une pression sonore excessive (volume
trop fort) dans les écouteurs ou dans le casque peut
causer une perte auditive.
Si vous rencontrez des problèmes avec ce produit,
contactez TEAC pour une assistance technique.
N'utilisez pas le produit tant qu'il n'a pas été réparé.
ATTENTION
N'exposez pas cet appareil aux gouttes ni aux
éclaboussures.
Ne placez pas d'objet rempli de liquide sur l'appareil,
comme par exemple un vase.
N’installez pas cet appareil dans un espace confiné
comme une bibliothèque ou un meuble similaire.
L’appareil doit être placé suffisamment près de
la prise de courant pour que vous puissiez à tout
moment attraper facilement la fiche du cordon
d'alimentation.
Si le produit utilise des piles/batteries (y compris
un pack de batteries ou des batteries fixes), elles ne
doivent pas être exposées au soleil, au feu ou à une
chaleur excessive.
PRÉCAUTION pour les produits qui utilisent des
batteries remplaçables au lithium: remplacer une
batterie par un modèle incorrect entraîne un risque
d'explosion. Remplacez-les uniquement par un type
identique ou équivalent.
Précautions concernant les batteries
rechargeables
Ce produit utilise des batteries rechargeables. Le
mauvais usage des batteries peut provoquer une fuite,
une rupture ou d'autres problèmes. Respectez toujours
les précautions suivantes pour l'emploi de batteries.
Si une batterie rechargeable coule, ne touchez pas
le fluide qui fuit à main nue. Veuillez consulter TEAC
Corporation en cas de fuite d'une batterie.
Le contact du liquide d'une batterie avec les
yeux peut entraîner une perte de la vision. Si cela
arrive, rincez immédiatement l'œil à l'eau claire.
Ne frottez pas l'œil durant le rinçage. Consultez un
médecin dès la fin du rinçage. Le contact du liquide
de batterie avec le corps ou les vêtements peut
entraîner des blessures ou des brûlures cutanées.
Rincez immédiatement à l'eau claire puis consultez
un médecin.
N'utilisez aucun autre adaptateur secteur que le
modèle conçu pour l'emploi avec cette unité.
Utilisez toujours l'adaptateur secteur prévu pour
faire fonctionner l'unité ou recharger les batteries
avec une source d'alimentation secteur domestique.
Utiliser un adaptateur secteur autre que celui
prévu peut entraîner une surchauffe et causer des
blessures, brûlures, incendies ou dégâts, ainsi que
des ruptures des batteries et l'écoulement de leur
liquide.
Ne placez pas la batterie dans un feu, ne la laissez
pas et ne la rechargez pas près d'un feu, au soleil ou
dans tout autre condition de chaleur élevée.
Ne démontez pas une pile. Cela pourrait entraîner
un choc électrique. Veuillez contactez le magasin
dans lequel vous avez acheté le produit ou TEAC
Corporation si vous voulez faire inspecter ou réparer
une batterie. Quand vous voudrez vous débarrasser
du produit, veuillez suivre les instructions du
mode d'emploi pour retirer la batterie et recycler
correctement cet équipement.
20
TASCAM DR-100MKIII
PRÉCAUTIONS CONCERNANT LES PILES
Ce produit utilise des piles. Le mauvais usage des piles
peut provoquer une fuite, une rupture ou d'autres
problèmes. Respectez toujours les précautions suivantes
pour l'emploi de piles.
Ne rechargez jamais des piles non rechargeables. Les
piles peuvent se rompre ou fuir, risquant de causer
un incendie ou des blessures.
Lors de l’installation des piles, faites attention aux
indications de polarité (orientation plus/moins
(¥/^)) et installez-les correctement dans le
compartiment des piles comme indiqué. Les installer
à l’envers peut entraîner la rupture ou la fuite des
piles, source d’incendie, de blessure ou de dégât
autour d’elles.
Quand vous rangez ou jetez des piles, isolez leurs
bornes avec de l'adhésif isolant ou avec un matériau
équivalent pour leur éviter d'entrer en contact avec
d'autres piles ou des objets métalliques.
Lorsque vous jetez les piles usagées, suivez les
instructions de mise au rebut indiquées sur les piles
et les lois locales sur l’enlèvement des ordures.
N'utilisez pas d'autres piles que celles spécifiées.
N'utilisez pas en même temps des piles neuves et
usagées, ni des types de piles différents. Les piles
peuvent se rompre ou fuir, risquant de causer un
incendie, des blessures ou des dégâts autour d’elles.
Ne transportez pas et ne conservez pas des piles en
même temps que de petits objets métalliques. Les
piles peuvent entrer en court-circuit, provoquant
une fuite, une rupture ou d'autres problèmes.
Ne chauffez et ne démontez pas les piles. Ne les jetez
pas dans un feu ou dans de l’eau. Les piles peuvent
se rompre ou fuir, risquant de causer un incendie,
des blessures ou des dégâts autour d’elles.
Si le liquide de la pile s’échappe, essuyez tout liquide
répandu dans le boîtier des piles avant d’insérer de
nouvelles piles. Si le liquide d’une pile touche un œil,
il peut entraîner une perte de la vue. Dans ce cas,
rincez abondamment à l’eau claire sans frotter l’œil et
consultez immédiatement un médecin. Si le liquide
touche le corps ou les vêtements d’une personne, il
peut entraîner des blessures ou brûlures cutanées.
Si cela se produit, rincez abondamment à l’eau claire
puis consultez immédiatement un médecin.
L’alimentation de l’unité doit être coupée quand
vous installez ou remplacez des piles.
Retirez les piles si vous envisagez de ne pas utiliser
l’unité durant une période prolongée. Les piles
peuvent se rompre ou fuir, risquant de causer un
incendie, des blessures ou des dégâts autour d’elles.
Si le liquide de la pile s’échappe, essuyez tout liquide
répandu dans le boîtier des piles avant d’insérer de
nouvelles piles.
Ne démontez pas une pile. L'acide qu'elle contient
peut entraîner des blessures cutanées ou des
dommages aux vêtements.
8
Pour les consommateurs européens
Mise au rebut des équipements
électriques et électroniques
(a) Tous les équipements électriques et électroniques
doivent être traités séparément de la collecte
municipale d'ordures ménagères dans des points
de collecte désignés par le gouvernement ou les
autorités locales.
(b) En vous débarrassant correctement des
équipements électriques et électroniques, vous
contribuerez à la sauvegarde de précieuses
ressources et à la prévention de potentiels effets
négatifs sur la santé humaine et l'environnement.
(c) Le traitement incorrect des déchets d'équipements
électriques et électroniques peut avoir des effets
graves sur l'environnement et la santé humaine en
raison de la présence de substances dangereuses
dans les équipements.
(d) Le symbole de poubelle sur roues
barrée d'une croix, indique que
les équipements électriques et
électroniques doivent être collectés
et traités séparément des déchets
ménagers.
(e) Des systèmes de retour et de collecte sont
disponibles pour l'utilisateur final. Pour des
informations plus détaillées sur la mise au
rebut des vieux équipements électriques et
électroniques, veuillez contacter votre mairie, le
service d'ordures ménagères ou le magasin dans
lequel vous avez acheté l'équipement.
Mise au rebut des piles et/ou
accumulateurs
(a) Les piles et/ou accumulateurs hors d'usage
doivent être traités séparément de la collecte
municipale d'ordures ménagères dans des points
de collecte désignés par le gouvernement ou les
autorités locales.
(b) En vous débarrassant correctement des piles et/
ou accumulateurs hors d'usage, vous contribuerez
à la sauvegarde de précieuses ressources et à la
prévention de potentiels effets négatifs sur la santé
humaine et l'environnement.
(c) Le traitement incorrect des piles et/ou
accumulateurs hors d'usage peut avoir des effets
graves sur l'environnement et la santé humaine en
raison de la présence de substances dangereuses.
(d) Le symbole de poubelle sur roues
barrée d'une croix, indique que les
piles et/ou accumulateurs doivent être
collectés et traités séparément des
déchets ménagers.
Si la pile ou l'accumulateur contient
plus que les valeurs de plomb (Pb), mercure (Hg)
et/ou cadmium (Cd) spécifiées dans la directive
sur les piles (2006/66/CE), alors les symboles
chimiques de ces éléments seront indiqués sous le
symbole de poubelle sur roues barrée d'une croix.
(e) Des systèmes de retour et de collecte sont
disponibles pour l'utilisateur final. Pour des
informations plus détaillées sur la mise au rebut
des piles et/ou accumulateurs, veuillez contacter
votre mairie, le service d'ordures ménagères ou le
magasin dans lequel vous les avez achetés.
Pb, Hg, Cd
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Tascam DR-100 MKIII Le manuel du propriétaire

Taper
Le manuel du propriétaire