Tascam DR-100 MKIII Le manuel du propriétaire

DR-100

)

#

Linear PCM Recorder

D01292000B

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

日本語

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

取扱説明書

https://tascam.jp/jp/

〒206-8530　東京都多摩市落合1-47

TEAC AMERICA, INC.

http://tascam.com/

Phone: +1-323-726-0303

1834 Gage Road, Montebello, California 90640 USA

TEAC MEXICO, S.A. de C.V.

http://teacmexico.net/

Phone: +52-55-5010-6000

Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF,

México

TEAC UK Ltd.

http://tascam.eu/

Phone: +44-8451-302511

2 Huxley Road, Surrey Research Park Guildford, GU2 7RE, United Kingdom

TEAC EUROPE GmbH

http://tascam.eu/

Phone: +49-611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

TEAC SALES & TRADING(SHENZHEN) CO., LTD

Phone: +86-755-88311561~2

Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd., Futian District, Shenzhen

518040, China

2

TASCAM DR-100MKIII

• TASCAM is a trademark of TEAC CORPORATION, registered in the U.S. and other

countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

• Supply of this product does not convey a license nor imply any right to distribute MPEG

Layer-3 compliant content created with this product in revenue-generating broadcast

systems (terrestrial, satellite, cable and/or other distribution channels), streaming

applications (via Internet, intranets and/or other networks), other content distribution

systems (pay-audio or audio-on-demand applications and the like) or on physical media

(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards

and the like). An independent license for such use is required. For details, please visit

http://mp3licensing.com.

• Blackfin® and the Blackfin logo are registered trademarks of Analog Devices, Inc.

• Other company names, product names and logos in this document are the trademarks

or registered trademarks of their respective owners.

TASCAM DR-100MKIII

3

Owner’s Manual

IMPORTANT SAFETY

PRECAUTIONS

INFORMATION TO THE USER

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment

and receiver.

c) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not

expressly approved by TEAC CORPORATION for

compliance could void the user’s authority to operate

this equipment.

For U.S.A.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST

CONFORME A LA NORME NMB-003 DU CANADA.

This product complies with the

European Directives request and the

other Commission Regulations.

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 1834 Gage Road, Montebello,

California, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

IMPORTANT SAFETY

INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

•

The apparatus draws nominal non-operating power

from the AC outlet with its POWER or STANDBY/ON

switch not in the ON position.

•

The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

•

Caution should be taken when using earphones or

headphones with the product because excessive

sound pressure (volume) from earphones or

headphones can cause hearing loss.

•

If you are experiencing problems with this product,

contact TEAC for a service referral. Do not use the

product until it has been repaired.

CAUTION

•

Do not expose this apparatus to drips or splashes.

•

Do not place any objects filled with liquids, such as

vases, on the apparatus.

•

Do not install this apparatus in a confined space

such as a book case or similar unit.

•

The apparatus should be located close enough to

the AC outlet so that you can easily grasp the power

cord plug at any time.

•

If the product uses batteries (including a battery

pack or installed batteries), they should not be

exposed to sunshine, fire or excessive heat.

•

CAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace

only with the same or equivalent type.

Cautions about rechargeable batteries

This product uses rechargeable batteries. Misuse of

batteries could cause a leak, rupture or other trouble.

Always abide by the following precautions when using

batteries.

•

If a rechargeable battery leaks, do not touch the

leaking fluid with a bare hand. Please consult with

TEAC Corporation if a battery fluid leak occurs.

•

Battery fluid in an eye could result in loss of vision. If

fluid enters an eye, wash the eye immediately with

clean water. Do not rub the eye when washing.

Consult a physician soon after washing. Battery fluid

on the body or clothing could cause injuries or burns

on the skin. Wash with clean water immediately and

then consult a physician.

•

Do not use any AC adaptor other than the model

designated for use with this unit. Always use the

designated AC adaptor when operating the unit

or recharging the battery with a household AC

power source. Use of an AC adaptor other than

the designated one could lead to overheating and

cause injury, burns, fires or stains, as well as battery

ruptures and battery fluid leaks.

•

Do not put a battery into a fire or leave it or recharge

it near a fire, under the sun or in other hot conditions.

•

Do not disassemble a battery. Doing so could cause

electric shock. Please contact the shop where you

bought the product or TEAC Corporation if you want

to have a battery inspected or repaired. When you

want to dispose of the product, please follow the

instruction in the Owner's Manual to remove the

batteries and recycle the equipment properly.

CAUTIONS ABOUT BATTERIES

This product uses batteries. Misuse of batteries could

cause a leak, rupture or other trouble. Always abide by

the following precautions when using batteries.

•

Never recharge non-rechargeable batteries. The

batteries could rupture or leak, causing fire or injury.

•

When installing batteries, pay attention to

the polarity indications (plus/minus (¥/^)

orientation), and install them correctly in the

battery compartment as indicated. Putting them in

backward could make the batteries rupture or leak,

causing fire, injury or stains around them.

•

When you store or dispose batteries, isolate their

terminals with insulation tape or something like that

to prevent them from contacting other batteries or

metallic objects.

•

When throwing used batteries away, follow the

disposal instructions indicated on the batteries and

the local disposal laws.

•

Do not use batteries other than those specified. Do

not mix and use new and old batteries or different

types of batteries together. The batteries could

rupture or leak, causing fire, injury or stains around

them.

•

Do not carry or store batteries together with small

metal objects. The batteries could short, causing

leak, rupture or other trouble.

•

Do not heat or disassemble batteries. Do not put

them in fire or water. Batteries could rupture or leak,

causing fire, injury or stains around them.

•

If the battery fluid leaks, wipe away any fluid on

the battery case before inserting new batteries. If

the battery fluid gets in an eye, it could cause loss

of eyesight. If fluid does enter an eye, wash it out

thoroughly with clean water without rubbing the

eye and then consult a doctor immediately. If the

fluid gets on a person’s body or clothing, it could

cause skin injuries or burns. If this should happen,

wash it off with clean water and then consult a

doctor immediately.

4

TASCAM DR-100MKIII

•

The unit power should be off when you install and

replace batteries.

•

Remove the batteries if you do not plan to use the

unit for a long time. Batteries could rupture or leak,

causing fire, injury or stains around them. If the

battery fluid leaks, wipe away any fluid on the battery

compartment before inserting new batteries.

•

Do not disassemble a battery. The acid inside the

battery could harm skin or clothing.

8

For European Customers

Disposal of electrical and electronic

equipment

(a) All electrical and electronic equipment should

be disposed of separately from the municipal

waste stream via designated collection facilities

appointed by the government or the local author-

ities.

(b) By disposing of the electrical and electronic

equipment correctly, you will help save valuable

resources and prevent any potential negative

effects on human health and the environment.

(c) Improper disposal of waste equipment can have

serious effects on the environment and human

health as a result of the presence of hazardous

substances in electrical and electronic equipment.

(d) The crossed out wheeled dust bin

symbol indicates that electrical

and electronic equipment must be

collected and disposed of separately

from household waste.

(e) The return and collection systems

are available to the end users. For more detailed

information about disposal of old electrical and

electronic equipment, please contact your city

office, waste disposal service or the shop where

you purchased the equipment.

Disposal of batteries and/or

accumulators

(a) Waste batteries and/or accumulators should

be disposed of separately from the municipal

waste stream via designated collection facilities

appointed by the government or the local author-

ities.

(b) By disposing of waste batteries and/or accumu-

lators correctly, you will help save valuable

resources and prevent any potential negative

effects on human health and the environment.

(c) Improper disposal of waste batteries and/or

accumulators can have serious effects on the

environment and human health as a result of the

presence of hazardous substances in batteries

and/or accumulators.

(d) The crossed out wheeled dust bin

symbol indicates that batteries and/or

accumulators must be collected and

disposed of separately from household

waste.

If the battery or accumulator contains

more than the specified values of lead (Pb),

mercury (Hg), and/or cadmium (Cd) defined

in the Battery Directive (2006/66/EC), then the

chemical symbols for lead (Pb), mercury (Hg) and/

or cadmium (Cd) will be indicated beneath the

crossed out wheeled dust bin symbol.

(e) The return and collection systems are available to

the end users. For more detailed information about

disposal of waste batteries and/or accumulators,

please contact your city office, waste disposal

service or the shop where you purchased them.

Pb, Hg, Cd

TASCAM DR-100MKIII

5

Contents

IMPORTANT SAFETY INSTRUCTIONS .............................3

Included items ........................................................................5

Recycling lithium-ion rechargeable batteries ...........5

Removing the built-in battery ............................................. 5

Note about the Reference Manual .................................5

About SD cards .......................................................................6

Precautions for use ...................................................................... 6

Precautions for placement and use ...............................6

Beware of condensation .....................................................6

Cleaning the unit ...................................................................6

Using the TEAC Global Site ................................................6

User registration ....................................................................6

Names of parts ........................................................................ 6

Top .......................................................................................................... 6

Front ...................................................................................................... 6

Rear panel .......................................................................................... 6

Left side ............................................................................................... 6

Right side ............................................................................................ 7

Bottom ................................................................................................. 7

Basic functions ........................................................................ 7

Home Screen overview ............................................................ 7

Basic menu operation procedures .................................... 7

Preparation ..............................................................................8

Powering the unit ......................................................................... 8

Inserting SD cards ......................................................................... 8

HOLD function for preventing accidental operation

. 8

Turning the unit on ...................................................................... 8

Turning the unit off (putting it in standby) ................. 8

Selecting the language ............................................................ 8

Setting the date and time ....................................................... 9

Formatting (initializing) SD cards ...................................9

Recording .................................................................................9

Adjusting input levels ................................................................ 9

Playing recordings ............................................................. 10

Deleting files ........................................................................ 10

Connecting with a computer ......................................... 10

Quick reference for using various functions.............11

Menu list ..................................................................................13

Function menu list ............................................................. 14

Message list ............................................................................15

Troubleshooting ................................................................. 16

Specifications ....................................................................... 16

General ..............................................................................................16

Inputs and outputs ....................................................................16

Audio performance ................................................................... 17

Recording times (in hours: minutes) .............................. 17

Other ................................................................................................... 17

Information is given about products in this manual

only for the purpose of example and does not indicate

any guarantees against infringements of third-party

intellectual property rights and other rights related

to them. TEAC Corporation will bear no responsibility

for infringements on third-party intellectual property

rights or other liabilities that occur as a result of the use

of this product.

Properties copyrighted by third parties cannot be

used for any purpose other than personal enjoyment

and the like without the permission of the right

holders recognized by copyright law. Always use this

equipment properly.

TEAC Corporation will bear no responsibility for rights

infringements committed by users of this product.

In consideration of the remote possibility that data

could be lost or damaged due to accidental erasure

or malfunction of this unit, for example, we highly

recommend that you back up important recordings

to a computer or other storage device.

Thank you very much for purchasing the TASCAM

DR-100MKIII Linear PCM Recorder.

Before using this unit, read this Owner's Manual

carefully so that you will be able to use it correctly and

enjoy working with it for many years. After you have

finished reading this manual, please keep it in a safe

place for future reference.

You can also download this Owner's Manual from the

TEAC Global Site (http://teac-global.com/).

This product has a Blackfin® 16/32-bit embedded

processor made by Analog Devices, Inc. This

processor controls the unit's digital signal processing.

Inclusion of this Blackfin® processor in the product

increases its performance and reduces its power

consumption.

Included items

This product includes the following items.

Keep the box and packing materials for transportation

in the future.

Please contact TASCAM Customer Support (see back

cover) if any of these items are missing or have been

damaged during transportation.

•

Main unit ................................................................× 1

•

Digital input conversion cable ................. × 1

•

Owner’s Manual (this document)

including warranty .......................................... × 1

Recycling lithium-ion

rechargeable batteries

This unit uses a built-in rechargeable lithium-ion battery.

When you no longer need a battery, take it to a shop

that participates in rechargeable battery recycling rather

than throwing it away in order to preserve precious

resources.

If you are uncertain, please contact TASCAM customer

support (see back cover).

Li-ion

CAUTION

•

Never disassemble the product other than when

preparing it for disposal.

•

Contact a TEAC service center (see back cover)

for rechargeable battery replacement.

Removing the built-in battery

Before removing the built-in battery, turn the unit on

and drain the battery until the unit completely stops

operating.

•

When draining the built-in battery, disconnect the

external power supply, remove the AA batteries, and

set the POWER/DISPLAY screen AUTO PWR SAVE item

to OFF.

•

To disassemble this unit, you will need to prepare a

Phillips head screwdriver (#0).

1.

Remove the rubber feet on the bottom of the unit.

2.

Remove the 4 screws that were covered by the

rubber feet.

3.

Remove the bottom panel.

4.

Disconnect the battery from the connector and

remove it.

Connector

Note about the Reference

Manual

This Owner’s Manual explains the main functions of this

unit. Please see the Reference Manual for information

about all the unit’s functions.

You can also download this Owner’s Manual and the

Reference Manual from the TEAC Global Site (http://

teac-global.com/).

6

TASCAM DR-100MKIII

About SD cards

This unit uses SD cards for recording and playback.

It can use 64MB–2GB SD cards, 4–32GB SDHC cards and

48–128GB SDXC cards.

A list of SD cards that have been confirmed for use

with this unit can be found on the TEAC Global Site

(http://teac-global.com/). You can also contact TASCAM

customer support for information.

Precautions for use

SD cards are delicate media. In order to avoid damaging

SD cards, please take the following precautions when

handling them.

•

Do not leave them in extremely hot or cold places.

•

Do not leave them in extremely humid places.

•

Do not let them get wet.

•

Do not put things on top of them or twist them.

•

Do not hit them.

•

Do not remove or insert them during recording,

playback, data transmission or other SD card access.

•

When transporting them, put them into cases, for

example.

Precautions for placement and

use

•

The environmental temperature operating range of

this unit is 0–40°C (32–104°F).

•

Do not install this unit in the following types of

locations. Doing so could make the sound quality

worse or cause malfunction.

Places with significant vibrations or that are

otherwise unstable

Places exposed to direct sunlight for extended

periods of time

Near heating equipment or other extremely hot

places

Extremely cold places

Places with bad ventilation or high humidity

Very dusty locations

Places exposed directly to rain or other water

•

If this unit is placed near a power amplifier or other

device with a large transformer, it could cause a hum.

If this occurs, increase the distance between this unit

and the other device.

•

This unit could cause color irregularities on a TV

screen or noise from a radio if used nearby. If this

occurs, use this unit farther away.

•

This unit might produce noise if a mobile phone or

other wireless device is used nearby to make calls or

to send or receive signals. If this occurs, increase the

distance between this unit and those devices or turn

them off.

•

To enable good heat dissipation, do not place

anything on top of the unit.

•

Do not place this unit on top of a power amplifier or

other device that generates heat.

Beware of condensation

Condensation could occur if the unit is moved from a

cold place to a warm place, it is used immediately after

a cold room has been heated or it is otherwise exposed

to a sudden temperature change. To prevent this, or if

this occurs, let the unit sit for one or two hours at the

new room temperature before using it.

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth. Do

not wipe with chemical cleaning cloths, thinner, alcohol

or other chemical agents. Doing so could damage the

surface or cause discoloration.

Using the TEAC Global Site

You can download this Owner’s Manual and the

Reference Manual necessary for this unit from the TEAC

Global Site (http://teac-global.com/).

1.

Open the TEAC Global Site (http://teac-global.

com/).

2.

In the TASCAM Downloads section, click the

desired language to open the Downloads website

page for that language.

NOTE

If the desired language does not appear, click

Other Languages.

3.

Click the product name in the “Search by Model

Name” section to open the Downloads page for

that product.

4.

Select and download the Owner’s Manual and the

Reference Manual that are needed.

User registration

Customers in the USA, please visit the TASCAM website

(http://tascam.com/) to register as a user online.

Names of parts

CAUTION

When connecting and using plugs from

headphones and other external devices, do not

apply excessive force to the plugs. In particular,

be careful not to apply too much force when

using a standard to mini plug adapter. Doing so

could damage the equipment.

Top

1 UNI MIC L/R (built-in directional stereo mic)

2 OMNI MIC L/R (built-in omnidirectional stereo

mic)

3 Built-in speaker (mono)

4 CHG (charge) indicator

5 Display

6 HOME button

7 LIMITER switch

8 Fn button

9 MENU button

0 . button

q / button

w STOP [8] button

e PLAY/PAUSE [7/9] button

r INPUT LEVEL selection switch

t MIC PAD switch

y ENTER/MARK button

u Wheel

i REC [0] button/REC indicator

Front

o DIGITAL IN connector

p EXT IN connector

Rear panel

a Level indicator

s REMOTE jack

d Strap attachments

f MIC/LINE IN L/R jacks (XLR/TRS)

g PHANTOM switch

Left side

h (power) button

j USB port

This is a Micro-B USB port.

Using a cable that complies with USB standards,

you can connect the unit to a computer as a mass

storage device or use an AC adapter to supply

power.

k LINE OUT jack

l (headphone) jack

; (headphone/speaker) LEVEL volume

TASCAM DR-100MKIII

7

z HOLD switch

x (speaker) switch

Right side

c Battery compartment (AA batteries)

v SD card slot

b Input level knob

Bottom

n Tripod mounting threads (1/4-inch)

m REC indicator

Basic functions

Home Screen overview

Stopped/playing

Recording/recording standby

1 Input source

2 Input channel indicator

3 Low cut filter status

4 Phantom power supply status

5 Power supply status

6 File format

7 Playback speed/loop playback status

8 Transport status (stopped/playing)

9 Loop playback IN/OUT point indicators

0 Level meters

q Playback folder name

w Playback file name

e Playback time/remaining playback time

r Playback position

t Peak value in decibels (dB)

y Recording format

u Recording function information

i Transport status (recording standby/

recording)

o Level meters

p Recording folder name

a Recording file name

s Recording time/remaining recording time

d Recording position

f Peak recording level in decibels (dB)

g Input levels

Basic menu operation procedures

1.

Open the MENU Screen.

Press the MENU button.

2.

Select a menu item.

Use the wheel to select the item, and press the

ENTER/MARK button to show the settings.

3.

Select a setting item.

Use the wheel to select the item, and press the

ENTER/MARK button to show the setting values.

NOTE

•

If the setting values are only ON and OFF, you

can switch them without selecting from a list.

•

Press the . button to return to the previous

screen.

4.

Select a setting value.

Use the wheel to change the setting, and press the

ENTER/MARK button to confirm it.

NOTE

•

Press the . button to cancel an operation.

•

Press the HOME button to return to the Home

Screen.

8

TASCAM DR-100MKIII

Preparation

Powering the unit

8

Using the built-in battery

Charge it before using the unit the first time after

purchase and after it has not been used for a long time.

•

Charging the built-in battery

Charge the built-in battery by using a TASCAM

PS-P520E AC adapter (sold separately) or by using a

USB cable (Type A Micro B) to connect the USB port

on the unit to a computer.

The unit can be used while the battery is charging.

TASCAM PS-P520E (sold separately)

AC outlet

Micro B

USB plug

You can check the recharging status of the built-in

batteries with the color of the CHG (charge)

indicator.

Lit orange: charging

Lit green: charging complete

8

Using AA batteries

1.

Slide the battery compartment cover toward the

bottom of the unit to open it.

2.

Install 2 AA batteries with their ¥ and ^ marks

as shown in the battery compartment.

3.

Close the battery compartment cover.

•

Set the type of batteries used in order to allow

the unit to accurately show the amount of power

remaining and determine whether enough power is

available for proper operation. (By default, this is set

to alkaline batteries.) (See “Quick reference for using

various functions” on page 11.)

Inserting SD cards

1.

Open the SD slot cover.

2.

Insert an SD Card into the slot as shown in the

illustration until it clicks into place.

3.

Close the SD card slot cover.

CAUTION

•

SD cards that meet SD, SDHC or SDXC standards

can be used with this unit.

•

A list of SD cards that have been confirmed to

work with this unit can be found on the TEAC

Global Site (http://teac-global.com/).

HOLD function for preventing

accidental operation

You can slide the HOLD switch to LEVEL or ALL to

enable the hold function that prevents accidental

operation.

ALL: operations of the input level knob and all

buttons are ignored

LEVEL: Operations of the input level knob are

ignored

OFF: hold function is off

Turning the unit on

Confirm that the HOLD switch is set to OFF, and press

down the (power) button until the screen appears.

The Home Screen appears after the unit starts up.

Turning the unit off (putting it in

standby)

Press the (power) button until the screen becomes

blank.

NOTE

•

You cannot turn the unit off (put it in standby)

when it is recording or in recording standby.

•

The automatic power saving function will turn

the power off when the unit is stopped. (See

“Quick reference for using various functions” on

page 11.)

Selecting the language

The first time you turn the unit on after purchasing

it, the LANGUAGE screen will open. You can set the

language used on this screen.

LCD screen (LANGUAGE screen)

1.

Turn the wheel to move the cursor and select the

language.

Options

ENGLISH: use English

日本語 : use Japanese

FRANÇAIS: use French

ESPAÑOL: use Spanish

DEUTSCH: use German

ITALIANO: use Italian

2.

After making the selection, press the ENTER/

MARK button to confirm it.

NOTE

You can change this setting with the SYSTEM

screen LANGUAGE item. (See “Quick reference for

using various functions” on page 11.)

TASCAM DR-100MKIII

9

Setting the date and time

The first time you turn the unit on after purchasing it

and whenever the date and time has been reset, the

DATE/TIME screen where you can set the date and time

will open.

1.

Turn the wheel to move the cursor to the item

(year/month/day/hour/minute/second) you want

to set, and press the ENTER/MARK button.

2.

Turn the wheel to change the value, and press the

ENTER/MARK button.

3.

Turn the wheel to move the cursor to OK, and press

the ENTER/MARK button to confirm the setting.

NOTE

You can also change the date and time setting from

the menu. (See “Quick reference for using various

functions” on page 11.)

Formatting (initializing) SD

cards

The following message appears if an unformatted card

is installed in the unit when it is turned on.

Press the ENTER/MARK button to format the card.

CAUTION

Formatting will erase all the data on the SD

card.

Backup data to a computer before formatting

the card.

NOTE

You can also use the SYSTEM screen MEDIA

FORMAT item to format a card. (See “Quick

reference for using various functions” on page

11.)

Recording

With this unit, you can record audio with even better

quality by changing the recording format and sampling

frequency, as well as setting the various functions,

including the limiter, level control and low-cut filter.

Here, we explain recording using UNI MIC L/R (default

setting).

Please see the Reference Manual for explanations of the

other functions.

1.

Start recording standby.

Press the REC [0] button to start recording

standby. The REC indicator will blink.

2.

Adjust the input level.

The input level can be adjusted even when in

recording standby or recording. (See “Adjusting

input levels” on page 9.)

3.

Start recording.

Press the REC [0] button when in recording

standby to start recording. The REC indicator will

stop blinking and stay lit.

4.

Stop recording.

Press the STOP [8] button again to stop

recording.

NOTE

•

Press the REC [0] button during recording to

pause recording.

•

Press the REC [0] button again to restart

recording.

Adjusting input levels

Before starting recording, the input levels must be

adjusted to suitable levels in order to prevent distortion

of input signals that are too loud and to prevent input

signals from being so quiet that they are masked by

noise.

8

Setting suitable input levels

Set the INPUT LEVEL selection switch to STEREO.

While watching the level meters, use the input level

knob to adjust the input level to around −12 dB.

Adjust the levels so they are as high as possible without

causing the PEAK level indicators to light when the

loudest sounds (peak levels) are input.

Level indicators

If the PEAK level indicators still light even when the

input levels are lowered as much as possible, set the

MIC PAD switch to ON and adjust again.

If the PEAK level indicators still light even after doing

this, try changing the distances and angles between the

microphones and the sound sources.

10

TASCAM DR-100MKIII

Playing recordings

8

Starting playback

Press the PLAY/PAUSE [7/9] button to start

playback.

8

Pausing playback

Press the PLAY/PAUSE [7/9] or STOP [8] button

to pause playback.

NOTE

Press the PLAY/PAUSE [7/9] button again to

resume playback.

8

Stopping playback

Press the STOP [8] button when paused to return to

the beginning of the file.

8

Searching backward and forward

When the Home Screen is open and a track is playing

back or stopped, press and hold the . or /

button to search forward or backward.

Release the button to stop again or resume playback.

8

Selecting files (skipping)

When stopped or playing back, press the . button

to skip to the previous file, or press the / button to

skip to the next file.

8

Listening with the built-in speaker

Set the (speaker) switch to ON.

8

Listening with headphones

Connect headphones to the (headphone) jack.

NOTE

When headphones are connected, the built-in

speaker will not output sound even when the

(speaker) switch is set to ON.

8

Adjusting the volume

Use the LEVEL control to adjust the volume

output from the built-in speaker and headphones.

Deleting files

Follow these steps to delete a recorded audio file.

1.

Open the Function Screen

Press the Fn button.

2.

Select the delete function.

Use the wheel to select FILE DELETE, and press

the ENTER/MARK button.

3.

Execute deletion.

Use the wheel to select YES, and press the ENTER/

MARK button to delete the file and return to the

Home Screen.

To cancel, select NO, and press the ENTER/MARK

button to return to the FUNCTION Screen.

CAUTION

Be aware that file deletion cannot be undone.

Connecting with a computer

You can transfer audio files on the SD card in the unit

to a computer, as well as transfer audio files from the

computer to the unit.

8

Connecting with a computer using

USB

1.

Connect the USB cable.

If the unit is off (in standby), turn it on.

2.

Activate the connection

Select the SYSTEM screen USB STORAGE item, and

press the ENTER/MARK button.

MENU

w SYSTEM w USB STORAGE

Use the wheel to select YES, and press

the ENTER/MARK button to activate the

connection.

To cancel, select NO, and press the ENTER/

MARK button.

3.

This unit appears on the computer as an external

drive named “DR-100MKIII” (if the card has been

formatted by this unit).

8

Exchanging files with a computer

After following the instructions in the previous section,

click the “DR-100MKIII” drive on the computer screen to

show the “MUSIC” and “UTILITY” folders.

To transfer files to the computer, open the “MUSIC”

folder and drag and drop the desired files to destina-

tions of your choice.

To transfer files from the computer, drag and drop the

desired audio files on the computer to the “MUSIC”

folder.

8

Disconnecting from a computer

Use the proper procedures on the computer to

unmount this unit. Then, press the ENTER/MARK

button on the unit to return to the Home Screen.

See the computer’s operation manual for instructions

about how to unmount an external volume.

TASCAM DR-100MKIII

11

Quick reference for using various functions

•

Button names are shown like this: MENU.

•

The following menu operations assume that the Home Screen is open before starting. Instructions are abbreviated.

For example, "Press the MENU button, select the menu item, and then select the setting item" becomes "MENU

w menu item w setting item".

•

For function details, see the Reference Manual.

Category Desired action/explanation Procedures, buttons used

Recording

Input settings

Select input sources

MENU w I/O SETTING w SOURCE

You can select the input source as you like and

according to the application.

Use a condenser mic that requires phantom

power supply

Turn the PHANTOM switch ON

You can set the phantom power voltage.

MENU w I/O SETTING w

PHANTOM VOLT

Use a small condenser mic that requires plug-in

power supply

MENU w I/O SETTING w

PLUG IN POWER

The unit can supply plug-in power.

Use mid-side microphones

MENU w I/O SETTING w

MS DECODE

The unit can convert mid-side format stereo

mic signals into ordinary stereo signals.

Air-conditioning or other noise is bothersome

MENU w I/O SETTING w

LOW CUT

The low-cut filter can reduce noise from

air-conditioners and other sources.

Record in mono

MENU w REC SETTING w

FILE TYPE

Input level

Adjust the input level Input level knob

If you want to adjust the left and right input

levels separately, set the INPUT LEVEL

selection switch to L or R.

INPUT LEVEL selection switch

Record without distortion

The meters are still peeking even though the

input level knob is turned all the way down.

Turn the MIC PAD switch ON

Avoid distortion when signals that are too loud

are input suddenly. (Limiter function)

Turn the LIMITER switch ON

Automatically adjust the recording level in

response to the input sound. (Automatic level

mode)

MENU w I/O SETTING w

LEVEL CONTROL w AUTO LEVEL

Automatically reduce the input level in

response to the maximum level of the input

sound. (Peak reduction mode)

MENU w I/O SETTING w

LEVEL CONTROL w PEAK REDUCTION

Category Desired action/explanation Procedures, buttons used

Recording

Basic settings

Set the recording audio quality

You can set the recording audio quality as you

like and according to the application.

MENU w REC SETTING w FORMAT

MENU w REC SETTING w SAMPLE

Record with even higher quality

Change the ADC audio quality.

MENU w I/O SETTING w

A/D FILTER

Improve the S/N performance.

MENU w I/O SETTING w

DUAL ADC

Change where recording files are saved MENU w BROWSE

Other

functions

Create a new file while continuing to record (file incrementing function)

Manually increment files

/ while recording

Automatically increment files at set time

intervals

MENU w REC SETTING w

FILE INC

Divide the recorded file that is selected

Divide a file manually

(File division function)

Fn w DIVIDE w DIVIDE

Divide at all mark positions.

(Mark division function)

Fn w DIVIDE w MARK DIVIDE

Start recording automatically (Automatic

recording function)

MENU w REC SETTING w

AUTO REC w MODE w LEVEL

The unit can start recording when it detects an

input signal level.

Record without losing the first sound at the

being of a file (Pre-recording function)

MENU w REC SETTING w

PRE REC

The unit can record up to two seconds before

recording is triggered.

Record a backup

MENU w REC SETTING w

DUAL REC w MODE w LEVEL

The unit can record a backup at a level 12dB

lower than the set recording level.

Simultaneously record WAV and MP3 files

MENU w REC SETTING w

DUAL REC w MODE w FORMAT

The unit can simultaneously record WAV and

MP3 files.

Playing recordings

Listen to playback through the built-in speaker Set the (speaker) switch to ON

Adjust the headphone/speaker volume

(headphone/speaker) LEVEL

volume

They volume might differ depending on the

headphones used.

Set this according to the headphones you are

using.

MENU w I/O SETTING w

OUTPUT ATT w PHONES

Change the playback file

Select a file before or after

.//

Select from a list MENU w BROWSE

12

TASCAM DR-100MKIII

Category Desired action/explanation Procedures, buttons used

Playing recordings

Change the playback position

Change the playback position while

outputting sound.

Press and hold .//

Move without outputting sound. Wheel

Repeat playback

Fn w LOOP PLAY

The unit can continuously repeat playback

of a single file or an interval. (Loop playback

function)

Change playback speed

Fn w VSA PLAY

The unit can play files slowly or quickly. (VSA

playback function)

Files

Save a file

Save the selected file Fn w CHANGE PROTECT

Select a file and save it

MENU w BROWSE w Fn w

CHANGE PROTECT

Delete a file

Delete a selected file Fn w FILE DELETE

Select a file and delete it

MENU w BROWSE w Fn w

FILE DELETE

Delete all files at the same time

MENU w BROWSE w Fn w

ALL FILES DELETE

Create a folder MENU w BROWSE w NEW FOLDER

Delete a folder

MENU w BROWSE w Fn w

FOLDER DELETE

Change the file name format MENU w SYSTEM w FILE NAME

Reset the file number

Reset the file number immediately

MENU w SYSTEM w

FILE No.RESET w RESET

Reset the file number each time a new folder

is created

MENU w SYSTEM w

FILE No.RESET w ON

Connect to a computer and transfer audio files

MENU w SYSTEM w USB STORAGE

You can use this unit as USB mass storage.

Marks

Add marks manually

ENTER/MARK when recording or

playing back

You can add marks manually when recording

or playing back (but not when stopped).

Category Desired action/explanation Procedures, buttons used

Marks

Add marks automatically to a recording

Add when the set level is exceeded (LEVEL).

Add when the set time is reached (TIME).

Add when a digital input track division is

detected (DIGITAL).

MENU w MARK SETTING w

AUTO MARK w MODE

Add when a level indicator PEAK lights.

MENU w MARK SETTING w

PEAK MARK

Move to a mark position

Move to a mark position. ENTER/MARK + .//

Select the mark to move to.

MENU w MARK SETTING w

MARK SKIP

Delete a mark

When stopped, move to a mark position and

press the ENTER/MARK button to delete it.

ENTER/MARK

Delete all marks in a file at the same time.

MENU w BROWSE w Fn w

CLR ALL MARKS

Settings

Display

Turn off the backlight

MENU w POWER/DISPLAY w

BACKLIGHT

Change the display brightness

MENU w POWER/DISPLAY w

BRIGHTNESS

Adjust the contrast

MENU w POWER/DISPLAY w

CONTRAST

Turn off the level and REC indicators

MENU w POWER/DISPLAY w

INDICATORS

Change the peak level and hold

MENU w POWER/DISPLAY w

PEAK LEVEL

Clear held peak levels

When the Home Screen is open, press

and hold Fn

This works only when the peak hold function

mode is set to HOLD.

System

View various types of information

You can view information about the SD card.

MENU w SYSTEM w INFORMATION

w CARD

You can check the firmware version.

MENU w SYSTEM w INFORMATION

w FIRMWARE

You can view information about files.

MENU w SYSTEM w INFORMATION

w FILE

Fn w FILE INFORMATION

You can view settings used while recording.

If the XRI data recording function is turned ON,

settings used during recording will be saved

with the file.

Fn w FILE INFORMATION

MENU w REC SETTING w XRI

TASCAM DR-100MKIII

13

Category Desired action/explanation Procedures, buttons used

Settings

System

Change date and time MENU w SYSTEM w DATE/TIME

Set the language MENU w SYSTEM w LANGUAGE

Restore factory default settings MENU w SYSTEM w INITIALIZE

Format an SD card

MENU w SYSTEM w

MEDIA FORMAT

Operation

Prevent accidental operation

Disable input level operations. HOLD w LEVEL

Disable the input level knob and all buttons. HOLD w ALL

Operate the the unit remotely

Set the remote control used. MENU w SYSTEM w REMOTE

Power

Turn the power off automatically (Automatic

power saving function)

MENU w POWER/DISPLAY w

AUTO PWR SAVE

Prevent batteries from being drained when

the unit is left unused.

The unit will not turn off automatically during

recording or playback.

Use the unit for extended amounts of time

Continuous operation for an extended amount

of time is possible by using both the built-in

battery and AA batteries. Set whether to use

the built-in battery or the AA batteries first.

MENU w POWER/DISPLAY w

BATTERY w PRIORITY

Set the type of AA batteries used to allow the

unit to show the remaining charge accurately.

MENU w POWER/DISPLAY w

BATTERY w AA TYPE

Starting recording immediately

Press (power) while pressing and

holding REC

When the unit is off (in standby mode), press

the (power) button while pressing and

holding the REC button to turn it on and start

recording immediately.

Other

functions

Prepare for synchronization with a video file

MENU w REC SETTING w

AUTO TONE

The unit can automatically generate a tone

signal when beginning and ending recordings.

By having the unit record this tone signal and

the camera record its output sound, synchro-

nizing during video editing can be made

easier.

Input signals to a camera

MENU w I/O SETTING w

OUTPUT ATT w LINE

The line output level can be attenuated 30 dB.

Menu list

Press the MENU button to open the MENU Screen.

Menu item Function

BROWSE

Work with files and folders on the SD card

REC SETTING

FORMAT

Set the recording file format

SAMPLE

Set the sampling frequency

FILE TYPE

Set the file type

XRI

Turn XRI data recording on/off

DUAL REC

Set dual recording function

FILE INC

Set the recording time interval for automatically incrementing files

AUTO REC

Set the auto-recording function

PRE REC

Set the pre-recording function

AUTO TONE

Set the auto tone function

I/O SETTING

SOURCE

Set the input source

A/D FILTER

Set the A/D converter filter

DUAL ADC

Turn on/off this function that improves S/N performance

PHANTOM VOLT

Set the phantom power voltage

PLUG IN POWER

Turn plug-in power on/off

LOW CUT

Set the low-cut filter

LEVEL CONTROL

Set the level control function

MS DECODE

Set the mid-side decoding function

OUTPUT ATT

Set the output attenuator function

MARK SETTING

AUTO MARK

Set the automatic mark function

PEAK MARK

Turn the peak mark function on/off

MARK SKIP

Set the mark skip mode

POWER/DISPLAY

AUTO PWR SAVE

Set the automatic power saving function

BATTERY

Makes settings related to the built-in and replaceable batteries

BACKLIGHT

Set how long the backlight stays on

BRIGHTNESS

Set the backlight brightness

CONTRAST

Adjust the contrast

INDICATORS

Turn indicators on/off

PEAK LEVEL

Set the level meter peak hold function

14

TASCAM DR-100MKIII

Menu item Function

SYSTEM

INFORMATION

Shows a variety of information.

DATE/TIME

Set the date and time

FILE NAME

Set the file name format.

FILE No.RESET

Reset the file number

REMOTE

Make connected remote control settings

LANGUAGE

Set the language shown on the display

INITIALIZE

Restore factory default settings

MEDIA FORMAT

Format the SD card

USB STORAGE

Switch to USB mass storage device mode

Function menu list

•

When the Home Screen is open and the unit is stopped, paused, playing back, or in recording standby, press the Fn

button to open the FUNCTION screen.

The function shown depends on the state of the unit when the Fn button is pressed.

Menu item Function

Stopped, paused or

playing back

CHANGE PROTECT

Change protection for the selected file

FILE DELETE

Delete the selected file

DIVIDE

Divide the selected file

LOOP PLAY

Make loop playback settings

VSA PLAY

Make VSA playback settings

MS DECODE

Set the mid-side decoding function

FILE INFORMATION

Show file information for the selected file

Recording standby

LOW CUT

Set the low-cut filter

LEVEL CONTROL

Set the level control function

MS DECODE

Set the mid-side decoding function

•

When a file or folder is selected on the Browse Screen, press the Fn button to open the FOLDER MENU or FILE MENU

screen.

Menu item Function

File selected on Browse

Screen

FILE INFORMATION

Show file information for the selected file

FILE DELETE

Delete the selected file

CHANGE PROTECT

Change the protection status of the selected file

CLR ALL MARKS

Delete all marks in the selected file

File not selected on

Browse Screen

ALL FILES DELETE

Delete all files in the selected folder

FOLDER DELETE

Delete the selected folder

TASCAM DR-100MKIII

15

Message list

The following is a list of the pop-up messages.

Refer to this list if one of these pop-up messages appears on the DR-100MKIII

and you want to check the meaning or determine a proper response.

Message Meaning and response

ALL HOLD on

The input level knob and all buttons have been

disabled by the HOLD switch.

LEVEL HOLD on

The input level knob has been disabled by the

HOLD switch.

Battery empty

Recharge the built-in battery or replace the

removable batteries.

Battery low

No card

Load an SD card.

Card protected

Move the write-protection switch to the unlocked

position in order to record or erase data on the SD

card.

Card error

The SD card was not recognized.

Change the SD card.

Card full

The SD card has no remaining space.

Format error

Format card

The SD card is not formatted properly or the card is

broken.

Press the ENTER/MARK button to start formatting.

Formatting will erase all the data on the SD card.

Invalid card

Change card

Something might be wrong with the SD card.

Change the SD card.

MBR error

Init card

The SD card is not formatted properly or the card is

broken.

Press the ENTER/MARK button to start formatting.

Formatting will erase all the data on the SD card. If

formatting is not possible, change the SD card.

Write error

REC continue

Writing to the SD card timed out. This has caused

audio to be interrupted and noise to occur.

A BOF mark is added at the point when audio was

interrupted.

Card slow

Check BOF MARK

SD card writing performance has become worse.

A BOF mark has been added at the point when

audio was interrupted because writing to the SD

card timed out.

Check the audio around the BOF mark.

Execute the erase format function or change the SD

card.

Invalid sys file

Make sys file

The system file required to operate this unit is

invalid.

Press the ENTER/MARK button to create a system

file.

No sys file

Make sys file

The system file is missing. This unit requires a system

file for operation.

Press the ENTER/MARK button to create a system

file.

Message Meaning and response

Non-supported

Please see the Reference Manual for file formats

that this unit can use.

File full

Recording is not possible because the total number

of folders and files would exceed the limit of 5000.

File not found

A file cannot be found or a file might be damaged.

Please check that file.

Can't delete

File protected

Remove protection from a file before trying to

delete it.

Can't divide

File too short

The file is too short, so it cannot be divided.

Can't divide

Current file MP3

MP3 files cannot be divided.

Can't divide

Dup file name

The divide function would cause the file name to

be the same as that of an existing file in the same

folder.

Use a computer to change the file name.

Can't divide

No mark

Files that do not have marks cannot be divided with

this function.

Can't divide

Short interval

Mark division will not work when the interval

between marks is two seconds or less.

Can't divide

No file

There is no audio file.

Can't divide

File name err

Division is not possible because the file name

would exceed the limit of 200 characters.

Use a computer to change the file name.

MARK full

The number of marks has reached the limit of 99.

Can't delete

Not empty

You cannot delete a folder that contains files.

Delete all the files in the folder and try again.

No XRI data

No XRI data has been saved in the file. Turn the

XRI data recording function ON before starting

recording.

XRI data cannot be saved when recording MP3 files.

Can't MARK

File protected

Marks cannot be added because the file is

protected from writing.

Remove protection from a file if you want to add

marks to it.

Can't MARK

File length

Marks cannot be added because the file is too short.

Digital-In

Unlock

Nothing is connected to the digital input (DIGITAL

IN) connector or the signal is not being input

correctly.

Check the digital connection.

Digital-In

Lock

Digital input has been properly detected.

DIN sample

Unmatch

The digital input sampling frequency does not

match the recording setting.

I/O too short

The IN and OUT points are too close together. Set

them with at least 1 second between them.

Message Meaning and response

Thermal Alert

Connect USB PWR

The internal temperature has risen while using the

built-in battery and/or AA batteries.

Continued use is possible by supplying power with

a USB connection.

Thermal Alert

The internal temperature has risen.

The system will shut down automatically.

If any other error occurs, turn the unit off and restart it.

16

TASCAM DR-100MKIII

Troubleshooting

If you are having trouble with the operation of this unit, please check the

following before seeking repair. If these measures do not solve the problem,

please contact the store where you bought the unit or TEAC customer support

(see back page).

8

The unit will not turn on.

•

Confirm that the built-in battery has enough charge or that the replaceable

batteries are installed correctly.

•

Confirm that the TASCAM PS-P520E AC adapter (sold separately) power

plug and the USB connector are securely connected. The unit might not

operate properly through a USB hub.

•

Confirm that the HOLD switch is set to OFF.

8

The unit turns off automatically.

•

Confirm that the automatic power saving function is disabled.

i

Since this unit complies with the European Standby Power Regulations

(ErP), the automatic power saving function operates regardless of

whether the unit is being powered by an AC adapter or batteries. If you

do not want to use the automatic power saving function, set it to OFF.

(The factory default setting is 30min.)

8

The CHG indicator alternately lights orange and

green.

•

Proper charging might not be possible in a location that is too hot or too

cold. Charging is possible when the temperature is between 0−30°C.

8

The remaining charge of the built-in battery is not

shown accurately

•

The remaining charge of the built-in battery might not be shown accurately

when the unit is purchased. Discharge and charge the battery completely

once to enable the unit to relearn the remaining battery charge and show

it accurately.

8

The unit does not function.

•

Confirm that the HOLD switch is set to OFF.

•

The unit will not function when in USB storage mode.

•

If operation becomes abnormal, press and hold the (power) button

for at least 10 seconds while holding down the STOP [8] button. This will

force the unit to turn off.

8

The SD card is not recognized.

•

Confirm that the SD card is inserted completely.

8

No sound is output.

•

Confirm the unit headphone/speaker output level.

•

Check the monitoring system connections and volume level.

•

No sound is output from the speaker in the following conditions.

i

The (speaker) switch is set to OFF

i

The unit is recording or in recording standby

i

Headphones are connected

8

Recording is not possible.

•

Confirm that the the SD card has enough open space.

•

Recording becomes impossible when the total number of files reaches

5000.

8

The input sound is extremely quiet or loud.

•

Check input level settings.

•

Check the output levels of connected external equipment.

8

The output sounds unnatural.

•

Check the playback speed (VSA playback function).

•

Confirm that the level control function is not on.

8

I cannot erase a file.

•

A protected (read only) file cannot be erased.

8

This unit’s files do not appear on the computer.

•

Confirm that the unit is properly connected to the computer using its USB

port. The unit might not operate properly if connected through a USB hub.

•

Confirm that the unit is in USB storage mode.

8

The wrong language was set accidentally.

•

After pressing the (power) button to turn the unit off, press the

(power) button while pressing and holding the MENU button.

The language selection menu will appear, and you will be able to select the

language.

Specifications

General

8

Recording media

SD card (64 MB−2 GB)

SDHC card (4 GB−32 GB)

SDXC card (48 GB−128GB)

8

Recording/playback formats

WAV (BWF):

44.1/48/88.2/96/176.4/192kHz, 16/24-bit

MP3: 44.1/48kHz, 128/192/256/320kbps

8

Number of channels

2 channels (stereo)

Inputs and outputs

8

MIC/LINE IN jacks (XLR support phantom power)

Connectors: XLR-3-31, 6.3mm (1/4") standard TRS jacks

8

EXT IN jack (can provide plug-in power)

Connector: 3.5mm (1/8”) stereo mini jack

8

DIGITAL IN connector

Connector: 3.5mm (1/8”) TRS jack

8

LINE OUT jack

Connector: 3.5mm (1/8”) stereo mini jack

8

(headphone) jack

Connector: 3.5mm (1/8”) stereo mini jack

8

Built-in speaker

0.4W (mono)

8

USB port

Connector type: Micro-B

Format: USB 2.0 HIGH SPEED mass storage class

8

REMOTE jack

Connector: 2.5mm (3/32”) TRS jack

TASCAM DR-100MKIII

17

Audio performance

8

Frequency response

MIC/LINE IN (MIC, PAD On) to LINE OUT

MIC/LINE IN (LINE) to LINE OUT

EXT IN (MIC, PAD On) to LINE OUT

EXT IN (LINE) to LINE OUT

20Hz−20kHz +0.5dB/−1dB (44.1/48kHz sampling frequency, JEITA)

20Hz−40kHz +0.5dB/−2dB (88.2/96kHz sampling frequency, JEITA)

20Hz−80kHz +0.5/−4dB (176.4kHz/192kHz sampling frequency, JEITA)

8

Distortion

MIC/LINE IN (MIC, PAD On) to LINE OUT

MIC/LINE IN (LINE, +20dBu Input) to LINE OUT

EXT IN (MIC, PAD On) to LINE OUT

EXT IN (LINE) to LINE OUT

0.007% or less

(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)

8

S/N ratio

MIC/LINE IN (MIC, PAD On) to LINE OUT

MIC/LINE IN (LINE) to LINE OUT

EXT IN (MIC, PAD On) to LINE OUT

EXT IN (LINE) to LINE OUT

102 dB or more

(44.1/48/88.2/96/176.4/192kHz sampling frequency, JEITA)

8

Equivalent input noise (EIN)

124 dBu or lower

Note: based on JEITA CP-2150

Recording times (in hours: minutes)

File format (recording setting) 4GB SDHC card

320kbps MP3 (stereo)

44.1kHz

27:46

16-bit WAV (stereo) 6:17

24-bit WAV (stereo) 96kHz 1:55

24-bit WAV (stereo) 192kHz 00:57

•

The recording times above are theoretical values and might differ

depending on the SD/SDHC/SDXC card in use.

•

The recording times shown above are not continuous recording times, but

rather they are the total possible recording times for the SD/SDHC/SDXC

card.

•

If recorded in mono, maximum recording times will be about double those

above.

•

If using dual recording, maximum recording times will be about half those

above.

Other

8

Power

Built-in lithium-ion rechargeable battery

2 AA batteries (alkaline, NiMH or lithium-ion)

USB bus power from a computer

AC adapter (TASCAM PS-P520E, sold separately)

External battery pack (TASCAM BP-6AA, sold separately)

8

Power consumption

7.5 W (maximum)

8

Battery operation time (continuous operation)

•

Using built-in (lithium-ion rechargeable) battery

Use conditions Operation time

UNI MIC (built-in directional mic) input

Phantom power unused

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 12 hours

MIC/LINE IN jack/mic input

Phantom power used (+48V, 3mA×2 load)

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 6 hours

•

Using alkaline batteries (EVOLTA)

Use conditions Operation time

UNI MIC (built-in directional mic) input

Phantom power unused

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 2.75 hours

MIC/LINE IN jack/mic input

Phantom power used (+48V, 3mA×2 load)

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 1 hours

•

Using NiMH batteries (eneloop)

Use conditions Operation time

UNI MIC (built-in directional mic) input

Phantom power unused

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 3.5 hours

MIC/LINE IN jack/mic input

Phantom power used (+48V, 3mA×2 load)

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 2.25 hours

•

Using lithium-ion batteries (Energizer Ultimate Lithium)

Use conditions Operation time

UNI MIC (built-in directional mic) input

Phantom power unused

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 7 hours

MIC/LINE IN jack/mic input

Phantom power used (+48V, 3mA×2 load)

STEREO WAV (BWF)/44.1kHz

16-bit recording

About 3.5 hours

NOTE

When using phantom power, the operation time might be reduced

depending on the mic being used.

8

Charging time (when unit off)

•

By USB: about 10 hours

•

Using PS-P520E: about 4.5 hours

8

Dimensions

80 x 155.7 x 35 mm (width × height × depth, excluding protrusions)

8

Weight

425 g/375 g (including batteries/not including batteries)

8

Operating temperature range

0°C–40°C (32°F–104°F)

•

Illustrations in this manual might differ in part from the actual product.

•

Specifications and external appearance might be changed without

notification to improve the product.

•

Detailed specifications are provided in the Reference Manual.

18

TASCAM DR-100MKIII

19

Mode d'emploi

PRÉCAUTIONS DE SÉCURITÉ

IMPORTANTES

Pour le Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST

CONFORME À LA NORME NMB-003 DU CANADA.

Ce produit est conforme aux

directives européennes et aux autres

réglementations de la Commission

européenne.

INSTRUCTIONS DE SÉCURITÉ

IMPORTANTES

1 Lisez ces instructions.

2 Conservez ces instructions.

3 Tenez compte de tous les avertissements.

4 Suivez toutes les instructions.

5 N'utilisez pas cet appareil avec de l'eau à proximité.

6 Ne nettoyez l'appareil qu'avec un chiffon sec.

7 Ne bloquez aucune ouverture de ventilation.

Installez-le conformément aux instructions du

fabricant.

8 Ne l'installez pas près de sources de chaleur telles

que des radiateurs, bouches de chauffage, poêles

ou autres appareils (y compris des amplificateurs)

dégageant de la chaleur.

9 Ne neutralisez pas la fonction de sécurité de la

fiche polarisée ou de terre. Une fiche polarisée

a deux broches, l'une plus large que l'autre.

Une fiche de terre a deux broches identiques et

une troisième broche pour la mise à la terre. La

broche plus large ou la troisième broche servent

à votre sécurité. Si la fiche fournie n'entre pas

dans votre prise, consultez un électricien pour le

remplacement de la prise obsolète.

10 Évitez de marcher sur le cordon d'alimentation et

de le pincer, en particulier au niveau des fiches, des

prises secteur, et du point de sortie de l'appareil.

11 N'utilisez que des fixations/accessoires spécifiés

par le fabricant.

12 Utilisez-le uniquement

avec des chariots, socles,

trépieds, supports ou tables

spécifiés par le fabricant ou

vendus avec l'appareil. Si

un chariot est utilisé, faites

attention à ne pas être blessé par un renversement

lors du déplacement de l'ensemble chariot/

appareil.

13 Débranchez cet appareil en cas d'orage ou de non

utilisation prolongée.

14 Confiez toute réparation à des techniciens

de maintenance qualifiés. Une réparation est

nécessaire si l'appareil a été endommagé d'une

quelconque façon, par exemple si le cordon ou

la fiche d'alimentation est endommagé, si du

liquide a été renversé sur l'appareil ou si des objets

sont tombés dedans, si l'appareil a été exposé

à la pluie ou à l'humidité, s'il ne fonctionne pas

normalement, ou s'il est tombé.

•

L’appareil tire un courant nominal de veille de la

prise secteur quand son interrupteur POWER ou

STANDBY/ON n’est pas en position ON.

•

La fiche secteur est utilisée comme dispositif de

déconnexion et doit donc toujours rester disponible.

•

Des précautions doivent être prises en cas

d'utilisation d'écouteurs ou d'un casque avec le

produit car une pression sonore excessive (volume

trop fort) dans les écouteurs ou dans le casque peut

causer une perte auditive.

•

Si vous rencontrez des problèmes avec ce produit,

contactez TEAC pour une assistance technique.

N'utilisez pas le produit tant qu'il n'a pas été réparé.

ATTENTION

•

N'exposez pas cet appareil aux gouttes ni aux

éclaboussures.

•

Ne placez pas d'objet rempli de liquide sur l'appareil,

comme par exemple un vase.

•

N’installez pas cet appareil dans un espace confiné

comme une bibliothèque ou un meuble similaire.

•

L’appareil doit être placé suffisamment près de

la prise de courant pour que vous puissiez à tout

moment attraper facilement la fiche du cordon

d'alimentation.

•

Si le produit utilise des piles/batteries (y compris

un pack de batteries ou des batteries fixes), elles ne

doivent pas être exposées au soleil, au feu ou à une

chaleur excessive.

•

PRÉCAUTION pour les produits qui utilisent des

batteries remplaçables au lithium: remplacer une

batterie par un modèle incorrect entraîne un risque

d'explosion. Remplacez-les uniquement par un type

identique ou équivalent.

Précautions concernant les batteries

rechargeables

Ce produit utilise des batteries rechargeables. Le

mauvais usage des batteries peut provoquer une fuite,

une rupture ou d'autres problèmes. Respectez toujours

les précautions suivantes pour l'emploi de batteries.

•

Si une batterie rechargeable coule, ne touchez pas

le fluide qui fuit à main nue. Veuillez consulter TEAC

Corporation en cas de fuite d'une batterie.

•

Le contact du liquide d'une batterie avec les

yeux peut entraîner une perte de la vision. Si cela

arrive, rincez immédiatement l'œil à l'eau claire.

Ne frottez pas l'œil durant le rinçage. Consultez un

médecin dès la fin du rinçage. Le contact du liquide

de batterie avec le corps ou les vêtements peut

entraîner des blessures ou des brûlures cutanées.

Rincez immédiatement à l'eau claire puis consultez

un médecin.

•

N'utilisez aucun autre adaptateur secteur que le

modèle conçu pour l'emploi avec cette unité.

Utilisez toujours l'adaptateur secteur prévu pour

faire fonctionner l'unité ou recharger les batteries

avec une source d'alimentation secteur domestique.

Utiliser un adaptateur secteur autre que celui

prévu peut entraîner une surchauffe et causer des

blessures, brûlures, incendies ou dégâts, ainsi que

des ruptures des batteries et l'écoulement de leur

liquide.

•

Ne placez pas la batterie dans un feu, ne la laissez

pas et ne la rechargez pas près d'un feu, au soleil ou

dans tout autre condition de chaleur élevée.

•

Ne démontez pas une pile. Cela pourrait entraîner

un choc électrique. Veuillez contactez le magasin

dans lequel vous avez acheté le produit ou TEAC

Corporation si vous voulez faire inspecter ou réparer

une batterie. Quand vous voudrez vous débarrasser

du produit, veuillez suivre les instructions du

mode d'emploi pour retirer la batterie et recycler

correctement cet équipement.

20

TASCAM DR-100MKIII

PRÉCAUTIONS CONCERNANT LES PILES

Ce produit utilise des piles. Le mauvais usage des piles

peut provoquer une fuite, une rupture ou d'autres

problèmes. Respectez toujours les précautions suivantes

pour l'emploi de piles.

•

Ne rechargez jamais des piles non rechargeables. Les

piles peuvent se rompre ou fuir, risquant de causer

un incendie ou des blessures.

•

Lors de l’installation des piles, faites attention aux

indications de polarité (orientation plus/moins

(¥/^)) et installez-les correctement dans le

compartiment des piles comme indiqué. Les installer

à l’envers peut entraîner la rupture ou la fuite des

piles, source d’incendie, de blessure ou de dégât

autour d’elles.

•

Quand vous rangez ou jetez des piles, isolez leurs

bornes avec de l'adhésif isolant ou avec un matériau

équivalent pour leur éviter d'entrer en contact avec

d'autres piles ou des objets métalliques.

•

Lorsque vous jetez les piles usagées, suivez les

instructions de mise au rebut indiquées sur les piles

et les lois locales sur l’enlèvement des ordures.

•

N'utilisez pas d'autres piles que celles spécifiées.

N'utilisez pas en même temps des piles neuves et

usagées, ni des types de piles différents. Les piles

peuvent se rompre ou fuir, risquant de causer un

incendie, des blessures ou des dégâts autour d’elles.

•

Ne transportez pas et ne conservez pas des piles en

même temps que de petits objets métalliques. Les

piles peuvent entrer en court-circuit, provoquant

une fuite, une rupture ou d'autres problèmes.

•

Ne chauffez et ne démontez pas les piles. Ne les jetez

pas dans un feu ou dans de l’eau. Les piles peuvent

se rompre ou fuir, risquant de causer un incendie,

des blessures ou des dégâts autour d’elles.

•

Si le liquide de la pile s’échappe, essuyez tout liquide

répandu dans le boîtier des piles avant d’insérer de

nouvelles piles. Si le liquide d’une pile touche un œil,

il peut entraîner une perte de la vue. Dans ce cas,

rincez abondamment à l’eau claire sans frotter l’œil et

consultez immédiatement un médecin. Si le liquide

touche le corps ou les vêtements d’une personne, il

peut entraîner des blessures ou brûlures cutanées.

Si cela se produit, rincez abondamment à l’eau claire

puis consultez immédiatement un médecin.

•

L’alimentation de l’unité doit être coupée quand

vous installez ou remplacez des piles.

•

Retirez les piles si vous envisagez de ne pas utiliser

l’unité durant une période prolongée. Les piles

peuvent se rompre ou fuir, risquant de causer un

incendie, des blessures ou des dégâts autour d’elles.

Si le liquide de la pile s’échappe, essuyez tout liquide

répandu dans le boîtier des piles avant d’insérer de

nouvelles piles.

•

Ne démontez pas une pile. L'acide qu'elle contient

peut entraîner des blessures cutanées ou des

dommages aux vêtements.

8

Pour les consommateurs européens

Mise au rebut des équipements

électriques et électroniques

(a) Tous les équipements électriques et électroniques

doivent être traités séparément de la collecte

municipale d'ordures ménagères dans des points

de collecte désignés par le gouvernement ou les

autorités locales.

(b) En vous débarrassant correctement des

équipements électriques et électroniques, vous

contribuerez à la sauvegarde de précieuses

ressources et à la prévention de potentiels effets

négatifs sur la santé humaine et l'environnement.

(c) Le traitement incorrect des déchets d'équipements

électriques et électroniques peut avoir des effets

graves sur l'environnement et la santé humaine en

raison de la présence de substances dangereuses

dans les équipements.

(d) Le symbole de poubelle sur roues

barrée d'une croix, indique que

les équipements électriques et

électroniques doivent être collectés

et traités séparément des déchets

ménagers.

(e) Des systèmes de retour et de collecte sont

disponibles pour l'utilisateur final. Pour des

informations plus détaillées sur la mise au

rebut des vieux équipements électriques et

électroniques, veuillez contacter votre mairie, le

service d'ordures ménagères ou le magasin dans

lequel vous avez acheté l'équipement.

Mise au rebut des piles et/ou

accumulateurs

(a) Les piles et/ou accumulateurs hors d'usage

doivent être traités séparément de la collecte

municipale d'ordures ménagères dans des points

de collecte désignés par le gouvernement ou les

autorités locales.

(b) En vous débarrassant correctement des piles et/

ou accumulateurs hors d'usage, vous contribuerez

à la sauvegarde de précieuses ressources et à la

prévention de potentiels effets négatifs sur la santé

humaine et l'environnement.

(c) Le traitement incorrect des piles et/ou

accumulateurs hors d'usage peut avoir des effets

graves sur l'environnement et la santé humaine en

raison de la présence de substances dangereuses.

(d) Le symbole de poubelle sur roues

barrée d'une croix, indique que les

piles et/ou accumulateurs doivent être

collectés et traités séparément des

déchets ménagers.

Si la pile ou l'accumulateur contient

plus que les valeurs de plomb (Pb), mercure (Hg)

et/ou cadmium (Cd) spécifiées dans la directive

sur les piles (2006/66/CE), alors les symboles

chimiques de ces éléments seront indiqués sous le

symbole de poubelle sur roues barrée d'une croix.

(e) Des systèmes de retour et de collecte sont

disponibles pour l'utilisateur final. Pour des

informations plus détaillées sur la mise au rebut

des piles et/ou accumulateurs, veuillez contacter

votre mairie, le service d'ordures ménagères ou le

magasin dans lequel vous les avez achetés.

Pb, Hg, Cd

La page charge ...

Tascam DR-100 MKIII Le manuel du propriétaire

Tascam DR-100 MKIII Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents