Pioneer DJ PLX-500-K Manuel utilisateur

PLX-500-K
PLX-500-W
TURNTABLE
PLATINE VINYLE
PLATTENSPIELER
GIRADISCHI
DRAAITAFEL
GIRADISCOS
GIRADISCOS
ПРОИГРЫВАТЕЛЬ 
ВИНИЛОВЫХ ДИСКОВ
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Handleiding
Manual de instrucciones
Manual de instruções
Инструкции по эксплуатации
pioneerdj.com/support/
The Pioneer DJ site shown above offers FAQs, information on software, and various other types of information
and services to allow you to use your product in greater comfort.
Le site Pioneer DJ indiqué ci-dessus propose une FAQ, des informations sur le logiciel et divers types
d’informations et de services qui permettent une utilisation plus confortable de ce produit.
Die oben angegebene Pioneer DJ-Website enthält häufig gestellte Fragen, Informationen über Software und
andere wichtige Informationen und Dienste, die Ihnen helfen, Ihr Produkt optimal zu verwenden.
Il sito Pioneer DJ indicato qui sopra offre una sezione FAQ, informazioni sul software ed informazioni e servizi
di vario tipo, per permettere un uso più confortevole dei nostri prodotti.
Op bovengenoemde Pioneer DJ website vindt u FAQ’s, informatie over software, en andere informatie en
diensten voor nog meer gebruiksgemak van uw product.
El sitio de Pioneer DJ indicado más arriba tiene una sección con las preguntas más frecuentes, y además
ofrece información del software y varios tipos de información y servicios para que usted pueda usar su
producto con la mayor comodidad.
O site da Pioneer DJ mostrado acima oferece FAQs, informações sobre o software e outros tipos de
informações e serviços para permitir utilizar o produto com um maior conforto.
Указанный выше сайт Pioneer DJ содержит ответы на часто задаваемые вопросы, информацию о 
программном обеспечении и различную другую информацию, а также предлагает услуги, чтобы вы 
могли с большим комфортом пользоваться приобретенным изделием.
РусскийPortuguêsEspañol
FrançaisDeutsch ItalianoEnglish Nederlands

En

2

Voltage selector

You can find the voltage selector switch on the top

panel of multi-voltage models.

The factory setting for the voltage selector is

220-240 V. Please set it to the correct voltage for

your country or region.

Before changing the voltage, disconnect the AC power

cord. Use a medium size screwdriver to change the

voltage selector switch.

D3-4-2-1-5*_A2_En

CAUTION

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

D3-4-2-1-1_B1_En

WARNING

This equipment is not waterproof. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture.

D3-4-2-1-3_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity:

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light).

D3-4-2-1-7c*_A2_En

CAUTION

The POWER switch on this unit will not completely

shut off all power from the AC outlet. Since the power

cord serves as the main disconnect device for the

unit, you will need to unplug it from the AC outlet to

shut down all power. Therefore, make sure the unit

has been installed so that the power cord can be

easily unplugged from the AC outlet in case of an

accident. To avoid fire hazard, the power cord should

also be unplugged from the AC outlet when left

unused for a long period of time (for example, when

on vacation).

D3-4-2-2-2a*_A1_En

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which requires

repair will be charged for even during the warranty period.

K041_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest service center or your

dealer for a replacement. S002*_A1_En

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058b_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space around

the unit for ventilation to improve heat radiation (at least

15 cm at top, 5 cm at rear, and 5 cm at each side).

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product,

and to protect it from overheating. To

prevent fire hazard,

the openings should never be blocked or covered with

items (such as newspapers, table-cloths, curtains) or by

operating the equipment on thick carpet or a bed.

D3-4-2-1-7b*_A1_En

En 3

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

Information to User

Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate

the equipment.

D8-10-2_A1_En

For other areas

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name: TURNTABLE

Model Number: PLX-500-K, PLX-500-W

Responsible Party Name: AlphaTheta Music Americas, Inc. OPERATIONS DIVISION

Address: 2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A.

Phone: 1-424-488-0480

URL: pioneerdj.com

D8-10-4*_C1_En

English

En

4

Contents

How to read this manual

! Thank you for buying this Pioneer DJ product.

Be sure to read this booklet, which includes important information

that you must understand before using this product.

After you have finished reading the instructions, put them away in a

safe place for future reference.

! In this booklet, the names of the buttons and terminals of the main

unit appear in square brackets ([ ]).

Examples:

Press the [START/STOP] button.

Before start

Features ....................................................................................................... 5

What’s in the box ........................................................................................ 5

Before you start

Installing rekordbox (Mac/Windows) ........................................................ 6

Assembly ..................................................................................................... 6

Part names and functions

Top panel ..................................................................................................... 8

Rear panel ................................................................................................... 9

Adjustment

Adjusting the tone arm balance .............................................................. 10

Adjusting the stylus pressure .................................................................. 10

Adjusting anti-skating .............................................................................. 11

Adjusting the arm lifter height ................................................................ 11

Adjusting the arm height ......................................................................... 11

Connections

Connecting to powered speakers............................................................ 12

Connecting to a pre-main amplifier and component ............................ 12

Connecting to a DJ mixer ......................................................................... 13

Connecting with a computer ................................................................... 13

Place of installation .................................................................................. 13

Adjusting the height of the main unit ..................................................... 13

Operation

Turning the power on ............................................................................... 14

Turning the power off ............................................................................... 14

Playback .................................................................................................... 14

Pausing playback...................................................................................... 14

Finishing playback .................................................................................... 14

Adjusting the pitch ................................................................................... 14

Displaying a record jacket ....................................................................... 14

To play a standard EP record ................................................................... 15

Illuminating the stylus tip ........................................................................ 15

Recording .................................................................................................. 15

Replacing the stylus ................................................................................. 15

Changing the cartridge ............................................................................ 15

Additional information

Troubleshooting ........................................................................................ 16

Cautions on use ........................................................................................ 16

Maintenance of each part ........................................................................ 16

About trademarks and registered trademarks ...................................... 17

Specifications............................................................................................ 17

En 5

English

Before start

Features

This unit is a high-torque direct drive turntable that can be enjoyed in a

variety of applications ranging from home listening to DJing.

High-quality analog record sound

The path from the stylus tip to the PHONO/LINE output has been

designed as the shortest to faithfully reproduce the original sound qual-

ity of analog records.

Furthermore, since not only PHONO output but also LINE output is sup-

ported, you can easily enjoy high quality analog record sound by simply

directly connecting with powered speakers.

Easy digital recording

A USB-B terminal is provided so you can directly connect this unit and

a PC or Mac and then record analog record sound sources to the PC or

Mac by converting them to data. Digital recording with simple operation

can be performed by using the recording function of the free music man-

agement application “rekordbox” (Ver.4.2.1 or later) when recording.

DJ performance capable direct-drive

turntable

The adoption of a high-torque direct-drive system means you can per-

form track mixing, scratching, and other DJ performances by combining

two of these units with a DJ mixer.

Dust cover that can serve as a stand for a

record jacket

A record jacket can be displayed on the dust cover while the dust cover

is in an open state. This allows you to enjoy analog record sound while

looking at the record jacket.

What’s in the box

! Turntable

! Slip mat

! Dust cover

! Adapter for EP record

! Balance weight

! Headshell (cartridge included)

! Shell weight

! Power cord

! USB cable

! Audio adapter cable (Stereo pin plug (female) to stereo mini plug

(male))

! Warranty (for some regions)1

! Operating instructions (this document)

1 The included warranty is for the European region.

WARNING

Store small parts out of the reach of children and

infants. If accidentally swallowed, contact a doctor

immediatel

y.

D41-6-4_A1_En

En

6

Before you start

Installing rekordbox (Mac/Windows)

1 Access rekordbox.com.

https://rekordbox.com/en/store/

! The page content is subject to change without notice.

2 Check the Get Started guide and then click [Free to

Download].

3 Carefully read the Software End User License

Agreement and select the [Agree] check box if you

agree.

When you select the check box, [Download] becomes clickable.

4 Click [Download].

Downloading of rekordbox (Mac/Windows) starts.

5 Double-click the downloaded file to unzip it.

6 Double-click the unzipped file to launch the installer.

7 Carefully read the Software End User License

Agreement, and continue with the installation according

to the instructions on the screen if you agree.

! If you do not agree to the contents of the Software End User License

Agreement, cancel the installation.

8 When the installation completion screen appears,

follow the instructions on the screen to close the

installer.

The installation is now complete.

! To use rekordbox dj, rekordbox dvs, and rekordbox video, activation

(license authentication) is required. For details, see the rekordbox

Operating Instructions.

https://rekordbox.com/en/support/manual.php

Assembly

1 Attach the turntable and slip mat.

Set the turntable on the center spindle and place the slip mat on top of

the turntable.

! Be careful not to hit the turntable on the main unit or drop it.

Turntable

Center spindle

Slip mat

2 Attach the headshell.

Insert the headshell with attached cartridge into the tone arm. Next,

while keeping the headshell horizontal, tighten the lock nut.

Lock nut

En 7

English

! Before use, remove the stylus cover without touching the stylus tip.

Stylus cover

3 Attach the balance weight.

Attach the balance weight to the rear shaft of the tone arm.

Balance weight

Attach the dust cover.

Insert the hinges of the dust cover into the holders at

the rear panel of this unit.

When removing the dust cover, pull the hinges up outward while the

dust cover is in an open state.

Hinge

Holder

En

8

Part names and functions

Top panel

1

2 3 45 6

c

d

e

f

ghij

a9

7

b

8

1 POWER switch

When turning the switch to the [ON] side, the power is turned on and

the strobe illuminator on the side lights.

= Turning the power on (p. 14 )

Turning the power off (p. 14 )

2 START/STOP button

Pressing the button starts or stops rotation of the turntable.

= Playback (p. 14 )

3 Speed change button

Changes the speed according to the record to be played.

! For a 33 1/3 rpm record, press the [33] button.

! For a 45 rpm record, press the [45] button.

! For a 78 rpm record, press the [33] button and [45] button at the

same time.

= Playback (p. 14 )

4 Stylus illuminator

Lights to illuminate the stylus tip.

= Illuminating the stylus tip (p. 15 )

5 Stylus illuminator switch

The stylus illuminator lights in white and ascends to the position at

which the stylus tip is illuminated.

= Illuminating the stylus tip (p. 15 )

6 Headshell

7 TEMPO slider

You can slide back and forth to perform fine adjustment of the rota-

tion speed.

= Adjusting the pitch (p. 14 )

8 Tone arm

= Adjustment (p. 10 )

9 Arm clamper

Clamps the tone arm.

a Arm rest

Serves as the support base for the tone arm.

b Lifter lever

The tone arm goes up when the lever is pulled up. The tone arm goes

down when the lever is pushed down.

c Arm lifter

This device is used to move the tone arm up and down. It is operated

by the lifter lever.

d ANTI SKATING dial

When a record is played, there is power to pull the stylus tip toward

the inner perimeter. By matching this dial to the stylus pressure

value, that power is eliminated.

= Adjusting anti-skating (p. 11 )

e HEIGHT ADJUST lock

Locks the adjusted height of the arm.

= Adjusting the arm height (p. 11 )

f HEIGHT ADJUST dial

Used to adjust the height of the tone arm.

= Adjusting the arm height (p. 11 )

g Balance weight

Used to balance the tone arm and adjust the stylus pressure.

= Adjustment (p. 10 )

h Stylus pressure adjustment ring

Used to match to the appropriate stylus pressure of the cartridge.

= Adjusting the stylus pressure (p. 10 )

i Headshell stand

Used to stand the headshell up.

j Adapter for EP record

Used to play standard EP records.

= To play a standard EP record (p. 15 )

En 9

English

Rear panel

3

12 4 5

1 PHONO/LINE switch

Switches the level of the sound output from the unit.

— [PHONO]: Select this when the unit is connected with a device

that supports phono level input, such as a pre-main amplifier or

component.

— [LINE]: Select this when the unit is connected with a device that

supports line level input, such as a powered speakers.

CAUTION

Do not connect the unit with a device that supports phono level input

while the PHONO/LINE switch is in the [LINE] state.

2 USB terminal

Connect the USB cable (included) here.

= Connecting with a computer (p. 13 )

3 Audio cable

= Connections (p. 12 )

4 AC IN

Connects to a power outlet using the included power cord. Wait until

all connections between the equipment are completed before con-

necting the power cord.

! Be sure to use the included power cord.

5 Insulator

Suppresses the effect of outside vibration. Turning the insulator

adjusts the turntable height.

= Adjusting the height of the main unit (p. 13 )

En

10

Adjustment

Adjusting the tone arm balance

Because the cartridge and headshell weights differ depending on the

product, the balance of the tone arm is adjusted.

Prepare as follows.

! Remove the stylus cover and arm clamper while paying attention not

to touch the stylus tip.

! Push down the lifter lever.

! Set the [ANTI SKATING] dial to “0”.

Keep the tone arm from the arm rest and adjust the

balance so it is horizontal.

Turn the balance weight until the tone arm becomes almost horizontal.

! When moving the tone arm, make sure that the stylus tip does not

directly touch the turntable and the like.

Adjusting the stylus pressure

To prevent stylus jumping or sound distortion, the stylus pressure is

adjusted to the appropriate stylus pressure value determined for each

cartridge.

The appropriate stylus pressure value for the included cartridge is from

3.0 g to 4.0 g.

Prepare as follows.

! Return the tone arm to the arm rest and secure with the arm clamp.

1 Match the “0” on the stylus pressure adjustment ring

to the center line of the arm rear shaft.

While using your finger to hold the balance weight to keep it from mov-

ing, turn only the stylus pressure adjustment ring so that the number “0”

comes to the black center line of the tone arm rear shaft.

Center line

2 Adjust the stylus pressure.

Turn the balance weight to adjust to the appropriate stylus pressure

value for your cartridge.

! When turning the balance weight, the stylus pressure adjustment

ring turns together. While observing the adjustment ring, adjust the

stylus pressure to the appropriate value.

Center line

En 11

English

Adjusting anti-skating

This adjustment is made to prevent stylus jumping.

Match to the same scale position as the stylus pressure

value.

Turn the [ANTI SKATING] dial to match the reference line to the same

value as the cartridge stylus pressure value.

When scratch play is performed

To prevent stylus jumping, adjust the scale position to match the play

action.

Adjusting the arm lifter height

When using other than the included cartridge, adjust this to match the

cartridge to be used.

Prepare as follows.

! A record is placed on a slip mat.

! Remove the stylus cover and arm clamper while paying attention not

to touch the stylus tip.

! Pull up the lifter lever and move the tone arm onto the record.

Adjust the height by turning the screw while the arm

lifter is pushed down.

— Turing clockwise narrows the distance between the record and

stylus.

— Turing counterclockwise widens the distance between the record

and stylus.

! The arm lifter height (the distance between the record and stylus

when the lifter lever is pulled up) is factory-adjusted in a range

between approximately 8 mm and 13 mm.

Screw

Arm lifter

Adjusting the arm height

When using the included cartridge, the “0” position is appropriate.

When using other than the included cartridge, adjust this to match the

cartridge to be used.

1 Turn the [HEIGHT ADJUST] lock to unlock the lock.

Unlock

2 Push down the lifter lever and place the stylus on the

record, then adjust the [HEIGHT ADJUST] dial to make

the tone arm and record parallel.

Adjust so that the tone arm becomes horizontal.

[HEIGHT ADJUST] dial

3 Turn the [HEIGHT ADJUST] lock to fix the height of

the arm.

After adjusting height of the arm, always turn the [HEIGHT ADJUST]

lock to fix the arm.

En

12

Connections

! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

! Refer to the operating instructions for the component to be connected.

! Connect the power cord after all the connections between devices have been completed.

Connecting to powered speakers

Powered speakers

Audio cable

Rear panel

Power cord

To power outlet

1 Set the [PHONO/LINE] switch to [LINE].

2 Connect the audio cable to the [LINE] input terminal of the powered speakers, etc.

! If necessary, use the included audio adapter cable.

3 Connect the power cord.

Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the

power cord.

Connecting to a pre-main amplifier and component

Pre-main amplifier, component, etc.

Audio cable

Rear panel

Power cord To power outlet

1 Set the [PHONO/LINE] switch to [PHONO].

2 Connect the audio cable to the [PHONO] input terminal of the pre-main amplifier or other component.

! If this product is connected to a pre-main amplifier or component that does not have a [PHONO] terminal, sufficient volume and sound quality

cannot be obtained. In that case, set the [PHONO/LINE] switch of this unit to [LINE] and then connect this unit to the [LINE] input terminal of the

pre-main amplifier or component or use a phono equalizer.

3 Connect the power cord.

Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the

power cord.

En 13

English

Connecting to a DJ mixer

Turntable DJ Mixer

Audio cable

Rear panel

Power cord To power outlet

1 Set the [PHONO/LINE] switch to [PHONO].

2 Connect the audio cable to the [PHONO] input terminal of the DJ mixer.

! If this product is connected to a DJ mixer that does not have a [PHONO] input terminal, sufficient volume and sound quality cannot be obtained. In

that case, set the [PHONO/LINE] switch of this unit to [LINE] and then connect the unit to the [LINE] input terminal of the DJ mixer.

3 Connect the power cord.

Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the

power cord.

Connecting with a computer

USB driver software is not required for this unit.

= Recording (p. 15 )

Rear panel

USB cable

Computer

To power outlet

Power cord

1 Connect the USB cable to a USB port on the computer.

2 Connect the power cord.

Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the

power cord.

Place of installation

Place the unit on a level surface that is free of external vibration.

! To the extent possible, keep the unit away from the speaker system.

! When the unit is very close to a radio (AM/FM broadcasting), the

radio could generate noise. Keep the distance as far away from the

unit as possible.

Adjusting the height of the main

unit

Adjust the height by turning the insulator in a way that the main unit is

horizontal.

En

14

Operation

Turning the power on

1 Make all the connections, then plug the power cord

into a power outlet.

= Connections (p. 12 )

2 Change the [POWER] switch to the [ON] side to turn

on the power of the unit.

This unit’s indicators light and the power turns on.

Turning the power off

Change the [POWER] switch to the [OFF] side to turn off

the power of the unit.

This unit’s power turns off.

Playback

Prepare as follows.

! Place a record on the turntable.

! Remove the stylus cover and arm clamper.

1 Change the [POWER] switch to the [ON] side to turn

on the power of the unit.

2 Select the rotation speed to match the record to be

played by pressing a speed change button.

3 Press the [START/STOP] button.

The turntable rotates.

4 Pull up the lifter lever and move the tone arm onto

the record.

5 Push down the lifter lever.

The tone arm slowly descends and playback begins.

Pausing playback

Pull up the lifter lever.

The stylus of the cartridge lifts away from the record.

! To resume playback, push down the lifter lever.

Finishing playback

1 Pull up the lifter lever to return the tone arm to the

arm rest and then push down the lifter lever.

2 Press the [START/STOP] button.

The turntable stops smoothly.

3 Change the [POWER] switch to the [OFF] side to turn

off the power of the unit.

Use the arm clamper to secure the tone arm.

To protect the stylus tip, attach the stylus cover.

Close the dust cover.

Adjusting the pitch

Move the [TEMPO] slider forward or backward.

Moving the slider forward increases the rotation speed and moving it

backward decreases the rotation speed.

! When the [TEMPO] slider is at the center, the indicator lights in

yellow-green and the rotation speed becomes the specified rpm

(33 1/3 rpm, 45 rpm, or 78 rpm).

! The scale of the [TEMPO] slider is a rough value. Please use it as a

guide.

! You can confirm that the rotation speed has become the specified

rpm by looking at the four rows of strobe patterns inscribed around

the turntable.

Strobe pattern

1 When the strobe pattern appears stopped, 33 1/3 rpm (50 Hz power

supply)

2 When the strobe pattern appears stopped, 45 rpm (50 Hz power

supply)

3 When the strobe pattern appears stopped, 33 1/3 rpm (60 Hz power

supply)

4 When the strobe pattern appears stopped, 45 rpm (60 Hz power

supply)

! A strobe illuminator (red LED light) is used to illuminate the strobe

pattern of this unit. When checking the pitch, always use the strobe

illuminator light.

Displaying a record jacket

Place the record jacket behind the stoppers attached to the dust cover

as shown in the figure.

StoppersRecord jacket

! Do not place anything other than a record jacket.

! Place the record jacket secured behind the stoppers properly.

! When using this feature during playback, be careful that the record

jacket does not fall. The record or stylus may be damaged.

! Be careful not to close the dust cover while a record jacket is placed

on it.

En 15

English

To play a standard EP record

Attach the EP record adapter to the center spindle and press the [45]

button.

Illuminating the stylus tip

When the stylus illuminator switch is pressed, the stylus illuminator

lights in white and ascends to the position at which the stylus tip is

illuminated.

! If it is not needed, press the stylus illuminator switch to lower it. The

stylus illuminator switch goes off.

! Do not look directly at the light while the stylus illuminator is lit.

Recording

Analog records can be digitally recorded by connecting with a computer

that has the music management software “rekordbox” installed.

For details, access the rekordbox product site below and see the rekord-

box Operating Instructions in [Support].

https://rekordbox.com/en/store/

Replacing the stylus

Check that the power is not on before performing the following

procedure.

1 Hold the cartridge with one hand.

2 Remove the cartridge in the direction of the arrow

while holding the stylus holder part with your other

hand.

Changing the cartridge

This unit is not compatible with MC cartridges. Use a VM cartridge or an

MM cartridge.

Removing the cartridge

1 Remove the screws, nuts, and washers attached to

the headshell.

2 Disconnect the lead wires connected to the cartridge.

Attaching the cartridge

1 Connect the cartridge while matching the colors of

the lead wires of the headshell and the symbols on the

cartridge terminals.

Match the colors of the lead wires of the headshell and the symbols on

the cartridge terminals as follows.

When looking from the front, the top left is L+: white, the bottom left is

L-: blue, the top right is R+: red, and the bottom right is R-: green.

! Connect the lead wires securely using tweezers or the like.

2 Attach the cartridge to the headshell using the

screws, nuts, and washers included with the cartridge.

Cartridge

Lead wire

Headshell

Shell weight

! When attaching the cartridge to the headshell, attach it properly.

! When using a cartridge between 5 g or less, use the supplied shell

weight.

Adjusting the overhang

Use the following overhang adjustment scale to adjust the position

using the cartridge attaching screw so that the stylus tip comes to a

position 53 mm from the tone arm attachment part.

53 mm

Overhang adjustment scale

53 mm

Additional information

Troubleshooting

! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points

below and the [FAQ] for the [PLX-500] on the Pioneer DJ support site.

pioneerdj.com/support/

Sometimes the problem may lie in another component. Inspect the other components and electrical appliances being used. If the problem cannot

be rectified, ask your nearest service center or your dealer to carry out repair work.

! This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the

power off, waiting 1 minute, then turning the power back on.

Problem Check Remedy

The power is not turned on. Is the power cord properly connected? Properly connect the included power cord to a power outlet.

Is the [POWER] switch for power supply set to

[ON]?

Set the [POWER] switch for power supply to [ON].

No sound or small sound. Are the audio cables properly connected? Connect the audio cables properly.

Are the terminals and plugs dirty? Clean the terminals and plugs before making connections.

Is the headshell attached properly? Attach the headshell property.

The left and right sound are reversed. Are the left and right connections for each piece of

equipment reversed?

Correctly connect the audio cable and the lead wires of headshell part.

There is a low hum sound (humming

or buzzing sound) during playback.

Is there an electric device such as a fluorescent

lamp or its power cord near the connection cord?

Place the power cord of the fluorescent lamp or other device as far away as

possible.

The stylus tip does not come down on

the record.

Is the stylus pressure adjusted property? Match the balance weight to the appropriate stylus pressure value for your

cartridge.

Is the arm horizontally balanced? Turn the balance weight until the tone arm becomes horizontal state.

Stylus jumping occurs. Is the stylus pressure adjusted property? Match the balance weight to the appropriate stylus pressure value for your

cartridge.

Is the record warped or does it have scratches? Check the condition of the record.

Does the stylus tip have a lot of dust on it? Remove the shell with cartridge and use a soft tip brush or writing brush to care-

fully remove dust, etc. from the stylus tip.

Is anti-skating adjusted correctly? Adjust anti-skating correctly.

Is the arm height adjusted correctly? Adjust the arm height correctly.

The arm stops along the way and does

not go ahead.

Does the record have scratches? Check the condition of the record.

Is the arm coming into contact with something? Check around the arm. If there is an obstacle, remove it.

Sound volume is low or loud

(distorted).

Is the connection to the amplifier appropriate for

the cartridge type (output)?

Connect the connection cables properly.

Is the setting of the [PHONO/LINE] switch correct? Set the [PHONO/LINE] switch correctly according to the input terminal of the

connected device.

The rotating turntable shakes a lot. Dirt, etc. is adhered to the attachment parts of the

turntable and center spindle.

Remove the dirt.

Cautions on use

About condensation

Water droplets (condensation) may form inside the unit (on operating

parts and lenses) in the winter, for example, if the unit is moved from a

cold place into a warm room or if the temperature in the room in which

the unit is installed rises suddenly (through heating, etc.). The unit will

not operate properly and will not be playable with condensation inside.

Let the unit stand for 1 to 2 hours at room temperature (though this

time depends on the conditions of the condensation) without turning on

the power. The water droplets will evaporate and the unit will become

playable. Condensation can occur in the summer as well if the unit is

exposed to the direct wind from an air-conditioner, etc. If this happens,

move the unit to a different location.

When transporting the unit to another

location

Use the original packing materials to pack the unit.

If the original packing materials are not available, be sure to perform the

following.

! Detach the slip mat and turntable before packing.

! Detach the headshell and balance weight from the arm and pack

carefully.

! Use the arm clamper to secure the tone arm and use tape to secure

it so that it does not move.

! Wrap the main unit in a blanket or soft paper so that it will not be

damaged.

! Pack so that a force will not be applied to the tone arm.

Maintenance of each part

When attaching and detaching the headshell, turn off the power of the

amplifier.

If you attempt to do so while the volume is loud, the speaker could be

damaged.

! Remove the shell with cartridge and use a soft tip brush or writing

brush to carefully remove dust, etc. from the stylus tip.

! Use a good quality record cleaner to clean records.

! Use a soft cloth or something similar to clean the headshell terminal

and then reattach it to the tone arm.

En

16

En 17

English

Cleaning the dust cover, etc.

Use a soft cloth to clean the dust cover and cabinet

! Do not clean the dust cover while playing. Static electricity could

cause the tone arm to be pulled by the dust cover.

About trademarks and registered

trademarks

! "Pioneer DJ" is a trademark of PIONEER CORPORATION, and is used

under license.

! rekordbox™ is a trademark or registered trademark of the AlphaTheta

Corporation.

The names of companies and products mentioned herein are trade-

marks or registered trademarks of their respective owners.

Specifications

Power requirements ........AC 110 V to 120 V or 220 V to 240 V, 50 Hz/60 Hz

Power consumption ............................................................................... 11 W

Main unit weight .................................................................................10.7 kg

Max. external dimensions ...

450 mm (W) × 158.5 mm (H) × 367.5 mm (D)

Tolerable operating temperature ........................................+5 °C to +35 °C

Tolerable operating humidity ...................... 5 % to 85 % (no condensation)

Turntable part

Drive method .............................................................. Servo type direct drive

Motor ...............................................................3-phase brushless DC motor

Braking system ................................................................... Electronic brake

Rotation speed ...................................................33 1/3 rpm, 45 rpm, 78 rpm

Rotation speed adjustment range ........................................................±8 %

Wow and flutter ........................................................... 0.15 % or less WRMS

S/N ratio .................................................................................50 dB or higher

Turntable.................................... Aluminum die-casting Diameter: 332 mm

Starting torque ................................................................ 1.6 kg·cm or more

Starting time ............................................... 1 second or less (at 33 1/3 rpm)

Tone arm part

Arm type .................................................. Universal type S-shape tone arm,

gimbal-supported type bearing structure, static balance type

Effective length............................................................................... 230.5 mm

Overhang ............................................................................................. 16 mm

Tracking error .................................................................................. Within 3°

Arm height adjustment range .............................................................. 6 mm

Stylus pressure variable range ............................. 0 g to 4.0 g (1 scale 0.1 g)

Proper cartridge weight ................................ 9.5 g or less (single cartridge)

Cartridge type ............................................................................................ VM

Output voltage

PHONO ......................................................................................2.5 mV/1 kHz

LINE ...........................................................................................150 mV/1 kHz

— The specifications and design of this product are subject to

change without notice.

Fr

2

ATTENTION

POUR ÉVITER TOUT RISQUE D’ÉLECTROCUTION, NE

PA

S ENLEVER LE COUVERCLE (NI LE PANNEAU

ARRIÈRE). A

UCUNE PIÈCE RÉPARABLE PAR

L

’UTILISATEUR NE SE TROUVE À L’INTÉRIEUR.

CONFIER TOUT ENTRETIEN À UN PERSONNEL

QU

ALIFIÉ UNIQUEMENT. D3-4-2-1-1_B1_Fr

AVER

TISSEMENT

Cet appareil

n’est pas étanche. Pour éviter les risques

d’incendie et de décharge électrique, ne placez près de

lui un récipient rempli d’eau, tel qu’un vase ou un pot

de fleurs, et ne l’exposez pas à des gouttes d’eau, des

éclaboussures, de la pluie ou de l’humidité.

D3-4-2-1-3_A1_Fr

Milieu de fonctionnement

Te

mpérature et humidité du milieu de fonctionnement :

De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité

relative inférieure à 85 % (orifices de ventilation non

obstrués

)

N’installez pas l’appareil dans un endroit mal ventilé ou

un lieu soumis à une forte humidité ou en plein soleil

(ou à une forte lumière artificielle).

D3-4-2-1-7c*_A1_Fr

Ce produit est destiné à une utilisation domestique

générale. Toute panne due à une utilisation autre qu'à

des fins privées (comme une utilisation à des fins

commerciales dans un restaurant, dans un autocar

ou sur un bateau) et qui nécessite une réparation

sera aux frais du client, même pendant la période de

garantie.

K041_A1_Fr

NOTE IMPORTANTE SUR LE CABLE

D’ALIMENTATION

Tenir le câble d’alimentation par la fiche. Ne pas

débrancher la prise en tirant sur le câble et ne pas

toucher le câble avec les mains mouillées. Cela risque

de provoquer un court-circuit ou un choc électrique. Ne

pas poser l’appareil ou un meuble sur le câble. Ne pas

pincer le câble. Ne pas faire de noeud avec le câble ou

l’attacher à d’autres câbles. Les câbles d’alimentation

doivent être posés de façon à ne pas être écrasés. Un

câble abîmé peut provoquer un risque d’incendie ou un

choc électrique. Vérifier le câble d’alimentation de

temps en temps. Contacter le service après-vente le

plus proche ou le revendeur pour un remplacement.

S002*_A1_Fr

AVER

TISSEMENT

P

our éviter les risques d’incendie, ne placez aucune

flamme nue (telle qu’une bougie allumée) sur

l’appareil.

D3-4-2-1-7a_A1_Fr

Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec vos ordures ménagères. Il existe un système de

collecte séparé pour les appareils électroniques usagés, qui doivent être récupérés, traités et recyclés conformément à la législation.

Les habitants des états membres de l’UE, de Suisse et de Nor

vège peuvent retourner gratuitement leurs appareils électroniques usagés aux

centres de collecte agréés ou à un détaillant (si vous rachetez un appareil similaire neuf).

Dans les pays qui ne sont pas mentionnés ci-dessus, veuillez contacter les autorités locales pour savoir comment vous pouvez vo

us débarrasser

de vos appareils.

V

ous garantirez ainsi que les appareils dont vous vous débarrassez sont correctement récupérés, traités et recyclés et préviendrez de cette façon

les impacts néfastes possibles sur l’environnement et la santé humaine.

K058b_A1_Fr

Sélecteur de tension

Le sélecteur de tension se trouve sur le panneau

supérieur des modèles multi-tension.

Le réglage d’usine du sélecteur de tension est

220-240 V. Réglez-le sur la tension adaptée à votre

pays ou région.

Avant de changer la tension, débranchez le cordon

d’alimentation secteur. Utilisez un tournevis de taille

moyenne pour changer le sélecteur de tension.

D3-4-2-1-5*_A2_Fr

PRÉCAUTION DE VENTILATION

Lors de l’installation de l’appareil, veillez à laisser un

espace suffisant autour de ses parois de manière à

améliorer la dissipation de chaleur (au moins 15 cm sur

le dessus, 5 cm à l’arrière et 5 cm de chaque côté).

AVER

TISSEMENT

Les fentes et ouvertures du coffret sont prévues pour la

ventilation

, pour assurer un fonctionnement stable de

l’appareil et pour éviter sa surchauffe. P

our éviter les

risques d’incendie, ne bouchez jamais les ouvertures et

ne les recouvrez pas d’objets, tels que journaux, nappes

ou rideaux, et

n’utilisez pas l’appareil posé sur un tapis

épais ou un lit

.

D3-4-2-1-7b*_A1_Fr

Fr 3

ATTENTION

L’interrupteur POWER de cet appareil ne coupe pas

complètement celui-ci de sa prise secteur. Comme le

cordon d’alimentation fait office de dispositif de

déconnexion du secteur, il devra être débranché au

niveau de la prise secteur pour que l’appareil soit

complètement hors tension. Par conséquent, veillez à

installer l’appareil de telle manière que son cordon

d’alimentation puisse être facilement débranché de

la prise secteur en cas d’accident. Pour éviter tout

risque d’incendie, le cordon d’alimentation sera

débranché au niveau de la prise secteur si vous

prévoyez une période prolongée de non utilisation

(par exemple avant un départ en vacances).

D3-4-2-2-2a*_A1_Fr

Français

Fr

4

Sommaire

Comment lire ce manuel

! Merci d’avoir acheté ce produit Pioneer DJ.

Veillez à lire ce manuel car il contient des informations importantes

qui doivent être comprises avant d’utiliser ce produit.

Cela fait, conservez le mode d’emploi de façon à pouvoir vous y

référer en cas de nécessité.

! Dans ce manuel, les noms des touches et des prises de l’appareil

principal apparaissent entre crochets ([ ]).

Exemples :

Appuyez sur la touche [START/STOP].

Informations préliminaires

Caractéristiques .......................................................................................... 5

Contenu du carton d’emballage ............................................................... 5

Avant de commencer

Installation de rekordbox (Mac/Windows) ............................................... 6

Montage ....................................................................................................... 6

Noms et fonctions des éléments

Panneau supérieur ..................................................................................... 8

Panneau arrière .......................................................................................... 9

Réglage

Réglage de l’équilibre du bras de lecture ............................................... 10

Réglage de la pression de la pointe de lecture ...................................... 10

Réglage de l’antipatinage ........................................................................ 11

Réglage de la hauteur du système de levage du bras ........................... 11

Réglage de la hauteur du bras ................................................................ 11

Raccordements

Raccordement à des enceintes amplifiées ............................................ 12

Raccordement à un préamplificateur principal et à un composant ... 12

Raccordement à une table de mixage DJ .............................................. 13

Raccordement à un ordinateur ............................................................... 13

Emplacement du lecteur ......................................................................... 13

Réglage de la hauteur de l’appareil principal ........................................ 13

Fonctionnement

Mise sous tension ..................................................................................... 14

Mise hors tension ..................................................................................... 14

Lecture ....................................................................................................... 14

Pause de la lecture ................................................................................... 14

Fin de la lecture ......................................................................................... 14

Réglage du pitch ....................................................................................... 14

Affichage d’une pochette de disque ....................................................... 14

Pour la lecture de disques 45 tours standard ........................................ 15

Éclairage de l’extrémité de la pointe de lecture ..................................... 15

Enregistrement ......................................................................................... 15

Remplacement de la pointe de lecture................................................... 15

Changement de cellule ............................................................................ 15

Informations supplémentaires

En cas de panne ....................................................................................... 16

Précautions d’emploi ............................................................................... 16

Entretien de chaque élément .................................................................. 17

À propos des marques commerciales et des marques déposées ....... 17

Spécifications............................................................................................ 17

La page charge ...

Pioneer DJ PLX-500-K Manuel utilisateur

Pioneer DJ PLX-500-K Manuel utilisateur

dans d''autres langues

Autres documents