Parkside PKLL 7 E4 Manuel utilisateur

Cross line laser PKLL 7 E4

Kreuzlinienlaser

Originalbetriebsanleitung

Cross line laser

Translation of the original instructions

IAN 385107_2107

Niveau laser en croix

Traduction des instructions d‘origine

Kruislijnenlaser

Vertaling van de originele

gebruiksaanwijzing

GB /IE Translation of the original instructions Page 4

FR/BE Traduction des instructions d‘origine Page 18

NL/BE Vertaling van de originele gebruiksaanwijzing Pagina 33

DE/AT/CH Originalbetriebsanleitung Seite 48

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et

familiarisez-vous ensuite avec toutes les fonctions de l‘appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u ver-

trouwd met alle functies van het apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

1

3

5

2

4

8

9

10

6

5

7

3

4

GB IE

Content

Introduction ...................... 4

Intended purpose.............. 5

General description .......... 5

Extent of the delivery ......5

Functional description .....6

Overview ......................6

Technical specications ..... 6

Safety information ............ 6

Symbols and icons .........6

General notes on safety .... 7

Safety Instructions for

Handling the Laser .........7

Safety Instructions for

Handling Batteries ..........8

Initial Operation ............... 9

Inserting/replacing

batteries ........................9

Operation ........................ 9

Working with the

automatic leveller ...........9

Working without the

automatic leveller .........10

Introduction

Congratulations on the

purchase of your new

device. With it, you have

chosen a high quality pro-

UKCA declaration of

conformity ...................... 63

Translation of the

original EC declaration

of conformity .................. 64

Working with the clamp

tripod .........................10

Working with the tripod .. 11

Cleaning ........................ 11

Storage .......................... 11

Maintenance .................. 12

Transport ....................... 12

Waste disposal and

environmental protection 12

Troubleshooting .............. 13

Guarantee ...................... 14

Repair Service ................ 16

Service-Center ................ 16

Importer ......................... 16

Spare parts/

Accessories ..................... 17

duct. During production, this

equipment has been checked

for quality and subjected to

a nal inspection. The func-

tionality of your equipment is

therefore guaranteed.

5

GB IE

The operating instruc-

tions constitute part of

this product. They contain

important information on sa-

fety, use and disposal.

Before using the product,

familiarise yourself with all

of the operating and safety

instructions. Use the product

only as described and for the

applications specied. Keep

this manual safely and in

the event that the product is

passed on, hand over all do-

cuments to the third party.

Intended purpose

The cross-line laser is suitab-

le for projecting vertical and

horizontal lines.

The device is only intended

for indoor use.

The device is intended to be

used by do-it-yourselfers. It

was not designed for heavy

commercial use.

The device is to be used by

adults. Children under the

age of 16 may not use the

device except under super-

vision.

The manufacturer is not lia-

ble for damage caused by

improper use or incorrect

operation.

General

description

See the front fold-

out page for

illustrations.

Extent of the

delivery

Carefully unpack the ap-

pliance and check that it is

complete. Dispose of the pa-

ckaging material correctly.

• Cross Line Laser

• Clamp tripod

with clamping jaws

• 2 x 1.5 V batteries,

AAA size

• Instruction Manual

6

GB IE

Functional

description

Refer to the following de-

scriptions for a functional

description of the controls.

Overview

1 On/off switch

2 LED ring

3 Battery compartment

4 Levelling stop / transport

securing device

5 Thread for tripod faste-

ning

6 Laser

7 Tripod screw

8 Retaining screw

9 Clamping nut

10 Clamping jaw

Technical

specifications

Cross Line Laser .... PKLL 7 E4

Working range .......... 7 m*

Weight (incl. batteries) ........

...................approx. 245 g

Power supply ............3 V

......... (2 x AAA 1.5 V cells)

Protection type ............ IP20

Self-levelling range ...... ± 4°

Levelling accuracy

at 0° to ± 4° ... ± 0.8 mm/m

from ± 4° ....... ± 1.0 mm/m

Laser

Wavelength .......... 635 nm

Laser class ......................2

Levelling time .. approx. 6 sec

* The working range may be restric-

ted by environmental conditions

(e.g. bright light).

Safety information

Symbols and icons

Symbols on the device:

LASER CLASS 2

EN 60825-1:2014

λ = 635 nm

P0 < 1 mW

Caution! - Laser beam

Do not look into the beam!

Laser class 2

7

GB IE

General notes

on safety

• Observe the information

on operation, cleaning,

storage and disposal in the

operating instructions.

• Keep children away from

the device.

• Check the device each

time before using. If da-

maged, have the device

repaired. Do not use the

device if damaged.

• Turn off the device when

not in use. Do not leave the

device unsupervised.

• Keep the device away from

medical devices, magnetic

data storage media and

magnetically sensitive de-

vices.

Safety Instructions

for Handling the

Laser

• Caution: Leaser beam

– Do not look into the

beam! Laser class 2

• Do not aim the laser beam

at people.

Electrical machines

do not belong with

domestic waste.

Direct voltage

Producer

UKCA mark

indicates conformity

with relevant Great

Britain regulations

applicable for the product.

Symbols used in the

instructions:

Hazard symbols

with information

on prevention of perso-

nal injury and property

damage.

Precaution symbol with

information on preven-

tion of harm / damage

Notice symbol with infor-

mation on how to handle

the device properly.

8

GB IE

Safety Instructions

for Handling

Batteries

• Ensure at all times that

the batteries are inserted

with the correct polarity

(+and–), as shown on the

battery itself.

• Do not short-circuit the bat-

teries.

• Do not charge non-rechar-

geable batteries.

• Do not overcharge batte-

ries!

• Do not mix old and new

batteries or batteries of a

different type or from diffe-

rent manufacturers! Repla-

ce all batteries of a set at

the same time.

• Remove used batteries im-

mediately from the device

and dispose of them cor-

rectly!

• Do not heat the batteries!

• Do not carry out any wel-

ding or soldering work

directly on the batteries!

• Do not take the batteries

apart!

• Do not deform the batteries!

• Do not throw the batteries

into re!

• Store the batteries out of

the reach of children.

• Do not allow children to re-

place the batteries without

supervision!

• Do not store the batteries

close to a re, cookers or

other sources of heat. Do

not place the battery in di-

rect sunlight and do not use

or store it in motor vehicles

in hot weather.

• Store used batteries in the

original packaging and

keep them away from

metal objects. Do not mix

(up) unpacked batteries!

Otherwise this may cause

the battery to short-circuit,

resulting in damage, burns

or even the danger of re.

• Remove batteries from the

device if this is not going

to be used for a prolonged

period, unless it is to be

used in emergencies!

• NEVER touch batteries

which have leaked without

appropriate protection. If

the leaked liquid comes

9

GB IE

into contact with the skin,

you should rinse off this

area of the skin immedia-

tely under running water.

Make sure at all events that

your eyes and mouth do not

come into contact with the

liquid. If they do, seek me-

dical advice immediately.

• Clean the battery contacts

and the equivalent contacts

in the device before inser-

ting the batteries.

Initial Operation

Inserting/replacing

batteries

1. Open the battery com-

partment (3).

2. Insert two AAA batteries.

Ensure you place the bat-

teries into the compart-

ment in accordance with

the illustration.

3. Close the battery com-

partment (3).

The LED ring (2) will ash

red when the battery

charge is low.

Operation

Caution! - Laser beam.

Do not look into the

beam. Turn your head away

or close your eyes to prevent

looking into the laser beam.

Danger of eye injury!

Working with the

automatic leveller

1. Place the device on a

horizontal solid surface.

The on/off switch (1) must

be pointing upwards.

Or fasten the device to a

tripod (see “Working with

the clamp tripod” / “Wor-

king with the tripod”).

2. Align the device so it is

parallel with the oor

3. Switch the device on by

releasing the levelling

stop: position .

The LED ring (2) will illu-

minate:

Green: if automatic le-

velling is possible.

Levelling is complete

once the laser lines no

longer move.

10

GB IE

Red: if automatic level-

ling is not possible.

The laser lines will ash

and longer be at exact

right-angles to one

another.

4. Switch the device off by

locking the levelling stop:

position .

In the event of vibra-

tions, the laser will level

itself automatically; wait until

the laser lines no longer

move.

Working without the

automatic leveller

Caution! - Laser beam.

Do not look into the

beam. Turn your head away

or close your eyes to prevent

looking into the laser beam.

Danger of eye injury!

The LED ring (2) will il-

luminate permanently

in red when working without

the automatic leveller. The la-

ser lines depicted are not le-

velled.

Switching on:

Turn the device on using

the on/off switch (1). The

levelling stop (4) must be in

position .

Switching off:

Turn the device off using the

on/off switch (1).

Working with the

clamp tripod

The clamp tripod provided

can be used to attach the de-

vice to various objects.

1. Release the clamping

nut(9).

2. Position the clamping

jaws (10) to the desired

location.

3. Turn the clamping nut (9)

until fastened.

4. Place the device with

thread (5) onto the tripod

screw (7) and tighten by

hand.

Do not use excessive

force as this may dama-

ge the device.

11

GB IE

5. Align the device. To do

so, release the retaining

screw (8) and move the

device into the desired

position.

6. Fix the position by

fastening the retaining

screw(8).

Working with the

tripod

You can place the device in

a stable position and adjust

the height using a tripod

(not provided in scope of

delivery).

Place the device with th-

read(5) onto the tripod

screw and tighten by hand.

Do not use excessive force

as this may damage the

device.

Cleaning

Have any work on

the device that is

not described in this in-

struction guide perfor-

med by a professional.

Only use original parts.

Do not use any cleaning

agents or solvents. Che-

mical substances may attack

the plastic parts of the device.

Never clean the device under

running water.

• Thoroughly clean the de-

vice after every use.

• Clean the disc protecting

the laser (6) with a soft jet

of air, or soft cloth. Do not

use heavy pressure as this

may damage the surface!

• Clean the surface of the

device with a soft brush or

cloth.

Storage

• Remove the batteries from

the device prior to leaving

it in prolonged storage.

• Store the device in a dry

and dustproof location and

out of reach of children.

12

GB IE

Maintenance

The device is maintenance

free.

Transport

Turn off the laser and lock the

levelling stop (4) when trans-

porting (position ) in order

to protect the levelling pendu-

lum from impact damage.

Waste

disposal and

environmental

protection

Take the batteries out of the

device and recycle the de-

vice, batteries, accessories

and packaging in an envi-

ronmentally friendly manner.

Electrical machines do

not belong with dome-

stic waste.

• Dispose of the batteries ac-

cording to local regulations.

Hand in the batteries at a

used battery collection point

where they are recycled in

an environmentally friendly

manner. Dispose of the bat-

teries in a discharged state.

For more information, please

contact your local waste

management provider or our

service centre.

In accordance with the Direc-

tive 2012/19/EU on waste

electrical and electronic

equipment, used electrical

devices must be collected

separately for disposal and

recycled in an environmental-

ly sound manner.

Depending on the implementa-

tion in national law, you may

have the following options:

• Return to a shop,

• Hand over to an ofcial

collection point. For more

information, please contact

your local waste manage-

ment provider or our service

centre.

• Return to the manufacturer/

distributor. We will dispose

of any defective devices

13

GB IE

Troubleshooting

Caution! - Laser beam. Do not look into the beam.

Trouble-

shooting Possible cause Corrective action

Device

does not

start

Batteries empty Replace batteries

Batteries incorrectly inserted Insert the batteries

correctly while ob-

serving polarity

Automatic

leveller

does not

work

The automatic leveller cannot

oscillate freely, the device is

not aligned sufciently paral-

lel with the oor

Align the device so

it is parallel with

the oor

that you send to us free of

charge.

This does not affect acces-

sories enclosed with the old

devices or tools without any

electrical components.

14

GB IE

Guarantee

Dear Customer,

This equipment is provided

with a 3-year guarantee

from the date of purchase.

In case of defects, you have

statutory rights against the

seller of the product. These

statutory rights are not re-

stricted by our guarantee

presented below.

Terms of Guarantee

The term of the guarantee

begins on the date of pur-

chase. Please retain the

original receipt. This docu-

ment is required as proof of

purchase.

If a material or manufactur-

ing defect occurs within

three years of the date of

purchase of this product, we

will repair or replace – at

our choice – the product

for you free of charge. This

guarantee requires the de-

fective equipment and proof

of purchase to be presented

within the three-year period

with a brief written descrip-

tion of what constitutes the

defect and when it occurred.

If the defect is covered by

our guarantee, you will

receive either the repaired

product or a new product.

No new guarantee period

begins on repair or replace-

ment of the product.

Guarantee Period and

Statutory Claims for

Defects

The guarantee period is not

extended by the guarantee

service. This also applies

for replaced or repaired

parts. Any damages and

defects already present at

the time of purchase must be

reported immediately after

unpacking. Repairs arising

after expiry of the guarantee

period are chargeable.

Guarantee Cover

The equipment has been

carefully produced in ac-

cordance with strict quality

guidelines and conscien-

tiously checked prior to

delivery.

15

GB IE

The guarantee applies for all

material and manufacturing

defects. This guarantee does

not extend to cover product

parts that are subject to nor-

mal wear and may therefore

be considered as wearing

parts (e.g. batteries) or to

cover damage to breakable

parts (e.g. switch).

This guarantee shall be

invalid if the product has

been damaged, used incor-

rectly or not maintained.

Precise adherence to all of

the instructions specied in

the operating manual is re-

quired for proper use of the

product. Intended uses and

actions against which the

operating manual advises or

warns must be categorically

avoided.

The product is designed

only for private and not

commercial use. The guar-

antee will be invalidated in

case of misuse or improper

handling, use of force, or

interventions not undertaken

by our authorised service

branch.

Processing in Case of

Guarantee

To ensure quick handling of

you issue, please follow the

following directions:

• Please have the receipt

and identication number

(IAN385107_2107) ready

as proof of purchase for

all enquiries.

• Please nd the item num-

ber on the rating plate.

• Should functional errors or

other defects occur, please

initially contact the service

department specied below

by telephone or by e-mail.

You will then receive further

information on the process-

ing of your complaint.

• After consultation with our

customer service, a product

recorded as defective can

be sent postage paid to

the service address com-

municated to you, with the

proof of purchase (receipt)

and specication of what

constitutes the defect and

when it occurred. In or-

der to avoid acceptance

problems and additional

16

GB IE

costs, please be sure to

use only the address com-

municated to you. Ensure

that the consignment is not

sent carriage forward or

by bulky goods, express or

other special freight. Please

send the equipment inc.

all accessories supplied at

the time of purchase and

ensure adequate, safe

transport packaging.

Repair Service

For a charge, repairs not

covered by the guarantee

can be carried out by our

service branch, which will

be happy to issue a cost esti-

mate for you.

We can handle only equip-

ment that has been sent with

adequate packaging and

postage.

Attention: Please send your

equipment to our service

branch in clean condition and

with an indication of the de-

fect. Equipment sent carriage

forward or by bulky goods,

express or other special

freight will not be accepted.

We will dispose of your defec-

tive devices free of charge

when you send them to us.

Service-Center

GB Service

Great Britain

Tel.: 0800 404 7657

E-Mail: [email protected]

IAN385107_2107

IE Service

Ireland

Tel.: 1800 101010

E-Mail: [email protected]

IAN385107_2107

Importer

Please note that the following

address is not a service ad-

dress. Please initially contact the

service centre specied above.

Grizzly Tools

GmbH & Co. KG

Stockstädter Straße 20

63762 Großostheim

Germany

www.grizzlytools.de

17

GB IE

Imported for

GB market by:

Lidl Great Britain Ltd.

Lidl House,

14 Kingston Road

Surbiton, KT5 9NU

Spare parts/Accessories

Spare parts and accessories can be obtained at

www.grizzlytools.shop

If you have issues ordering, please use the contact form. If

you have any other questions, contact the ”Service-Center”

(see page 16).

Position

instruction manual Description Order No.

7-10 Clamp tripod (complete) 91102999

18

FR BE

Tabele des

matières

Introduction .................... 19

Fins d‘utilisation ............. 19

Description générale ....... 19

Volume de la livraison ..20

Description du

fonctionnement ............20

Vue d‘ensemble ...........20

Caractéristiques

techniques ...................... 20

Consignes de sécurité ..... 21

Symboles et

pictogrammes ..............21

Consignes de sécurité

générales ....................... 21

Consignes de sécurité

pour la manipulation

du laser ......................22

Consignes de sécurité

pour la manipulation

des piles .....................22

Mise en service ............... 23

Installer/remplacer

les piles ......................23

Opération ...................... 23

Travailler avec le

dispositif de nivellement

automatique ................24

Traduction de la décla-

ration de conformité CE

originale ........................ 65

Travailler sans le

dispositif de nivellement

automatique ................24

Travailler avec le trépied

de serrage ..................25

Travailler avec

le trépied ....................25

Nettoyage ...................... 26

Rangement ..................... 26

Maintenance .................. 26

Transport ....................... 26

Elimination et protection

de l’environnement ......... 27

Dépannage .................... 28

Garantie ........................ 28

Service Réparations ........ 31

Service-Center ................ 31

Importateur .................... 31

Pièces de rechange /

Accessoires ..................... 32

19

FR BE

Introduction

Toutes nos félicitations pour

l’achat de votre nouvel

appareil. Vous avez ainsi

choisi un produit de qualité

supérieure.

La qualité de l’appareil a été

vériée pendant la produc-

tion et il a été soumis à un

contrôle nal. Le fonctionne-

ment de votre appareil est

donc ainsi garanti.

La notice d’utilisation

fait partie de ce produ-

it. Elle contient des instruc-

tions importantes pour la sé-

curité, l’utilisation et

l’élimination des déchets.

Avant d’utiliser ce produit, li-

sez attentivement les consig-

nes d’emploi et de sécurité.

N’utilisez le produit que tel

que décrit et uniquement

pour les domaines d’emploi

indiqués.

Conservez cette notice et

remettez-la avec tous les

documents si vous cédez le

produit à un tiers.

Fins d‘utilisation

Le laser à lignes croisées con-

vient à la projection de lignes

verticales et horizontales.

Cet appareil est exclusive-

ment destiné à une utilisation

en intérieur. L‘appareil est

destiné à être utilisé dans

le domaine du bricolage. Il

n‘a pas été conçu pour une

utilisation professionnelle

constante. L‘appareil est

destiné à être utilisé par des

adultes. Les jeunes de plus

de 16 ans ne doivent utiliser

cet appareil que sous la sur-

veillance d‘un adulte.

Le fabricant ne peut être

tenu pour responsable des

dommages causés par une

utilisation inappropriée ou

par une manipulation incor-

recte.

Description

générale

Vous trouverez la

représentation des

fonctions les plus importan-

tes sur le volet rabattable.

20

FR BE

Volume de la livraison

Déballez l’appareil et vériez

que la livraison est comp-

lète. Evacuez le matériel

d’emballage comme il se doit.

• Niveau laser en croix

• Trépied de serrage avec

mâchoires de serrage

• Piles 2 x 1,5 V,

formatAAA

• Notice d‘utilisation

Description du

fonctionnement

Pour la fonction des pièces

de service, veuillez vous

reporter aux descriptions

suivantes.

Vue d‘ensemble

1 Interrupteur Marche/

Arrêt

2 Anneau LED

3 Compartiment à piles

4 Loquet du niveau / Sé-

curité transport

5 Filetage pour la xation

du trépied

6 Laser

7 Vis du trépied

8 Vis de blocage

9 Écrou de serrage

10 Mâchoires de serrage

Caractéristiques

techniques

Niveau laser en croix .........

........................... PKLL 7 A4

Plage de travail ......... 7 m*

Poids (batteries

incluses) ............env. 245 g

Alimentation ............. 3 V

.....(2 x AAA cellules 1,5 V)

Type de protection ...... IP20

Plage de nivellement

automatique ............... ± 4°

Précision de nivellement

de 0° à ± 4° ..± 0,8 mm/m

à partir de ± 4 ...± 1,0 mm/m

Laser

Longueur d‘onde ... 635 nm

Classe de laser ...............2

Durée de

nivellement ........ env. 6 sec

* La plage de travail peut être rest-

reinte par les conditions ambian-

tes (par ex. lumière vive).

La page charge ...

Parkside PKLL 7 E4 Manuel utilisateur

Parkside PKLL 7 E4 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents