Outdoor Tech Chips Ultra 2.0 Manuel utilisateur

Chips Ultra 2.0
Marque
Outdoor Tech
Modèle
Chips Ultra 2.0
Taper
Manuel utilisateur
CHIPS® ULTRA 2.0
TRUE WIRELESS
HELMET
AUDIO Hi. Good call on picking up the Outdoor Tech®
Chips® Ultra 2.0 true wireless helmet audio.
Your experience of the universe will soon
be enhanced. This manual exists to help
make sure that you use them correctly, so
you’re definitely going to want to relax for a
hot second and look through this.
Kisses,
CONTENTS WHAT’S INSIDE
• Left and right helmet audio
• Charging case
• USB-C charging cable
• Instruction manual
• One ODT sticker
1
ANATOMY
2
What's Inside ...................................................... 1
Anatomy ............................................................2
Functions ...........................................................3
Charging The Case .............................................4
Charging The Chips ............................................5
Pairing ...............................................................6
Music Functions ................................................7
Phone Functions ................................................8
Volume Controls ................................................9
Put The Chips Ultra 2.0 in Your Helmet ............. 10
Specs ................................................................ 11
Care And Maintenance ..................................... 12
NEW Faster Charging - USB to USB-C cable
FUNCTIONS
RIGHT
EAR PIECE
LEFT
EAR PIECE
CHARGING CASE
A B
D
A. Left ear button
B. Right ear button
C. LED light
D. Microphone
E. Hi-Fi Speakers
LEFT EAR
BUTTON
RIGHT EAR
BUTTON
C C
4
CHARGING-THE CASE
Charge up the case so you always have power for your
Chips® Ultra 2.0 on the go.
Fast charging with the new USB-C cable. Once the
charging case is plugged in the indicator light on the
front will turn RED- (CHARGING). It will turn GREEN once
the case is completely charged.
Case total charging time: 1.5 hours to fully charge the
case.
CHARGING-THE CHIPS
5
Charge your Chips® Ultra 2.0 on the way to the hill,
instead of having to plug them in the night before.
Gently plug the three holes on the side of the Chips®
Ultra 2.0 into the three prongs in the charging case.
Be sure to put the Left Chip in the Left side and the
Right Chip in the Right side in the charging case.
The LED lights on both Chips will be RED - (CHARGING).
Once both LEDs go off the Chips are fully charged.
Chips® Ultra 2.0 total charging time: About 2 hours
E
Power On LEFT Long press for 3 sec
Power On RIGHT Long press for 3 sec
Power Off LEFT Press and hold for 4 sec
Power Off RIGHT Press and hold for 4 sec
Answer RIGHT Short press once
Reject RIGHT Long press for 2 sec
Hang Up RIGHT Short press once
Play RIGHT Short press once
Pause RIGHT Short press once
Skip Forward RIGHT Short press twice
Skip Backward RIGHT Short press three times
Raise Volume LEFT Short press once
Lower Volume LEFT Short press twice
Siri/Voice Activation
RIGHT Long press 1 sec
Reset Chips Ultra/
Clear BT Memory
Refer to the paper insert in
the box
for instructions
FUNCTION EARPIECE ACTION
3
LEFT RIGHT
SPECSPUT THE CHIPS ULTRA 2.0 IN YOUR HELMET CARE & MAINTENANCE
VOLUME CONTROLS
outdoortech.com
DON’T BE SO ANTISOCIAL
Facebook.com/outdoortechnology
Twitter & Instagram: @outdoortech
Questions, comments, complaints, secret desires,
or just to say what’s up: email [email protected]
K bye.
6 7 8 9 10 11 12
Bluetooth version: Bluetooth 5.0+ EDR
Bluetooth profiles: A2DP, AVRCP, HSP, HFP
Driver units: 40mm Neodymium magnet
Frequency Response: 20~20,000 Hz
Impedance: 32 + 32 ohms
Sensitivity (1kHz): 110 dB
Range: Up to 10m/33ft
Microphone: Built-in microphone
Battery: 3.7V, 250 mAh
Chips Charging time: About 2 hours
Play / Talk time: Up to 14 hours
CHARGING CASE
Charging time: 1.5 hours (DC 5V 2A)
Battery: 3.7V 2000 mAh
PAIRING
POWER ON THE RIGHT
(long press 3 seconds)
VOICE PROMPT:
“power on >> battery level >> pairing”
Choose: “ODT Chips Ultra 2.0” in
your phone’s Bluetooth settings.
VOICE PROMPT: “device connected”
POWER ON THE LEFT
(long press 3 seconds)
VOICE PROMPT: “power on >> connected”
LEFT RIGHT
Power On/Off
Volume Up/Down
Skip Forward
Power On/Off
Pairing Mode
Play/Pause
Answer/End/Reject Call
LEFT RIGHT
Power On/Off
Volume Up/Down
Skip Forward
Power On/Off
Pairing Mode
Play/Pause
Answer/End/Reject Call
RIGHT
LEFT
MUSIC FUNCTIONS PHONE FUNCTIONS
-Keep the Chips® Ultra 2.0 away from direct sunlight or
hot places. High temperatures will shorten the
life of electronic devices, destroy the battery or
distort certain plastic parts.
-Do not try to disassemble the CHIPS® Ultra 2.0.
-Do not let the Chips® Ultra 2.0 fall onto the floor or
other hard surfaces. The internal circuit board
may get damaged.
-Do not use intensive chemical products or
detergent to clean the product.
-Do not scratch the surface with sharp things.
1. Drop the CHIPS® Ultra 2.0 into the slots
inside your helmet liner.
2. Rock out, make calls, and, you know, ski
and snowboard and whatnot.
RIGHT RIGHT LEFT
FUNCTION ACTION
POWER ON long press 3 seconds
POWER OFF Press and hold 4 seconds
PLAY short press 1x
PAUSE short press 1x
SKIP FORWARD short press 2x
SKIP BACKWARD short press 3x
FUNCTION ACTION
ANSWER CALL short press 1x
END CALL short press 1x
REJECT CALL long press 2 seconds
SIRI / VOICE
ACTIVATION long press 1x
FUNCTION ACTION
POWER ON long press 3 seconds
POWER OFF Press and hold 4 seconds
VOLUME UP short press 1x
VOLUME DOWN short press 2x
IT’S EASY!
JUST SLIDE THEM IN
No wires, no cords,
just slide them into
your helmet ear
pads and your
ready to hit
the slopes.
IT’S EASY!
JUST SLIDE THEM IN
No wires, no cords,
just slide them into
your helmet ear
pads and your
ready to hit
the slopes.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry
Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC& IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure
limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations
définies par le Canada pour des environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec
une autre antenne ou un autre émetteur.
ADVANCED CHIP SET
FOR BETTER CONNECTION
Bluetooth 5.0
LONGER PLAY/TALK TIME
14 HOURS
14
HOURS
  • Page 1 1
  • Page 2 2

Outdoor Tech Chips Ultra 2.0 Manuel utilisateur

Chips Ultra 2.0
Marque
Outdoor Tech
Modèle
Chips Ultra 2.0
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents